Diff b/n sy-tabix and sy-indx

diff b/n sy-tabix and sy-indx ?

Hi Henry,
SY-INDEX is the value of the current iteration. It is applicable for the following programming constructs in ABAP -
DO...ENDDO.
WHILE...ENDWHILE.
SY-TABIX (TABle IndeX) is applicable to internal tables. If you scroll down in the link which Eddie has given, you will find a more detailed explanation for sy-tabix and which statements affect its value.
Regards,
Anand Mandalika.

Similar Messages

ABAP-- diff between sy-sy-tabix and sy-index

Hi Guru's,
Pleae can anybody expalins me what is the difference between sy-tabix and sy-index(Loop Index) ?
Because in one case i am Modifyimg the internal table inside the do loop by giving sy-index ((Index of Internal Tables)(MODIFY scarr_tab INDEX sy-index FROM scarr_wa TRANSPORTING currcode. ) in the syntax and in other case inside loop statement i am modifyng same record by giving sy-tabix MODIFY scarr_tab INDEX sy-tabix FROM scarr_wa TRANSPORTING currcode.) in the syntax.
in both cases its working fine but i am not getting which one i have to use where to modify the internal table?
regards
SATYA

Hi Henry,
SY-INDEX is the value of the current iteration. It is applicable for the following programming constructs in ABAP -
DO...ENDDO.
WHILE...ENDWHILE.
SY-TABIX (TABle IndeX) is applicable to internal tables. If you scroll down in the link which Eddie has given, you will find a more detailed explanation for sy-tabix and which statements affect its value.
Regards,
Anand Mandalika.

What is diff b/w sy-index and sy-tabix

Hi all,
Can u plz give me the diff b/w sy-index and sy-tabix exactly and how it works.
Thanks & Regards
Venkat

Hi Venkat,
1.SY-INDEX
->Current loop pass
->In a DO or WHILE loop, SY-INDEX contains the number of loop passes including the current pass.
2.SY-TABIX
->Current line index
Current line of an internal table. SY-TABIX is set by the statements below, but only for index tables.
The field is either not set or is set to 0 for hashed tables.
APPEND sets SY-TABIX to the index of the last line of the table, that is, it contains the overall number of entries in the table.

COLLECT sets SY-TABIX to the index of the existing or inserted line in the table. If the table has the type HASHED TABLE, SY-TABIX is set to 0.
LOOP AT sets SY-TABIX to the index of the current line at the beginning of each loop lass. At the end of the loop, SY-TABIX is reset to the value that it had before entering the loop. It is set to 0 if the table has the type HASHED TABLE.
READ TABLE sets SY-TABIX to the index of the table line read. If you use a binary search, and the system does not find a line, SY-TABIX contains the total number of lines, or one more than the total number of lines. SY-INDEX is undefined if a linear search fails to return an entry.

SEARCH <itab> FOR sets SY-TABIX to the index of the table line in which the search string is found.
I think that it clears ur doubt.
Thanks,
Venkat.O

What is the diffrence betweensy-tabix and sy-index

hi
can any one suggest me
what is the diffrence betweensy-tabix and sy-index
Thanks & Regards
kalyan.

Hi Kalyan,
This question has been answered many times on SCN. Please make a search before posting a thread.
Read the Rules of Engagement.
Happy Posting.
Regards,
Chandra Sekhar

Difference between sy-tabix and sy-index?

tell me about sy-tabix and sy-index?what is the difference between sy-tabix and sy-index?
Moderator Message: Please search before posting. Read the [Forum Rules Of Engagement |https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement] for further details.
Edited by: Suhas Saha on Jun 18, 2011 5:33 PM

HI,
Here is a brief description of difference between SY_TABIX and SY_INDEX and using them with several conditions.
SY-TABIX
Current line of an internal table. SY-TABIX is set by the statements below, but only for index tables. The field is either not set or is set to 0 for hashed tables.
APPEND sets SY-TABIX to the index of the last line of the table, that is, it contains the overall number of entries in the table.
COLLECT sets SY-TABIX to the index of the existing or inserted line in the table. If the table has the type HASHED TABLE, SY-TABIX is set to 0.
LOOP AT sets SY-TABIX to the index of the current line at the beginning of each loop lass. At the end of the loop, SY-TABIX is reset to the value that it had before entering the loop. It is set to 0 if the table has the type HASHED TABLE.
READ TABLE sets SY-TABIX to the index of the table line read. If you use a binary search, and the system does not find a line, SY-TABIX contains the total number of lines, or one more than the total number of lines. SY-INDEX is undefined if a linear search fails to return an entry.
SEARCH <itab> FOR sets SY-TABIX to the index of the table line in which the search string is found.
SY-INDEX
In a DO or WHILE loop, SY-INDEX contains the number of loop passes including the current pass.
Hope this helps.
Thank you,
Pavan.

What is difference between sy-index and sy-tabix and where both are using ?

what is difference between sy-index and sy-tabix and where both are using ?

hi nagaraju
sy-tabix is in Internal table, current line index. So it can only be used while looping at the internal table.
sy-index is in Loops, number of current pass. This you can use in other loop statements also (like do-enddo loop, while-endwhile)
SY-INDEX is a counter for following loops: do...enddo, while..endwhile
SY-TABIX is a counter for LOOP...ENDLOOP, READ TABLE...
Here is an example from which you can understand the difference between sy-tabix and sy-index.
Itab is an internal table with the following data in it.
id Name
198 XYZ
475 ABC
545 PQR.
loop at itab where id > 300.
write :/ itab-id, itab-name , sy-tabix, sy-index.
endloop.
My output will be :
475 ABC 2 1
545 PQR 3 2
Sy-tabix is the index of the record in internal table.
sy-index gives the no of times of loop passes.
So, for the first record in the output (475 ABC), 2 is the index of the record in internal table and as it is first time loop pass occured, sy-index value is 1.
Regards,
navjot
award points

Sy-tabix and sy-dbcnt and sy-dynrr? significance

hi all,
Can anyone let me know the significance of sy-tabix and sy-dbcnt and sy-dynrr?
found while debugging any abap programs.
can anyone explain me with an example.
thanxs and regds
haritha

sy-dynnr-current screen number
sy-tabix-current loop pass.....
sy-dbcnt---number of database records processed
Sy-dycnt - I never used
Sy-tabix ,suppose you have internal table,you want to modify some record based on condition
loop at itab.
itab-fld2 = 2000.
modify itab index sy-tabix. -> here itab modfies currnet internal table index.
endloop.
SY-DYNNR - We use this one in module pool program,some times there would be conditions.
let me take one simple example :
you have two screens for one program.
you want to validate ,you want to give message. i have common include
now first screen i need to give one message
i will write simple code
if sy-dynnr = 100.
message
endif.
same thing i use for other screen too
Thanks
Seshu

Wht is diff b/w sy-ucomm and ok code

hi,
what is diff b/w sy-ucomm and ok-code
Regards,
Rani.

Hi,
sy-ucomm is for doing the functions what the user wishes to do at that particular event. You use it in menus and other place . this mainly in using <pfstatus>
ok_code is generally used in screen as of I have used. You will define the function in the screen. and you can use it in the main program.
ok_code acts just as a temporary variable that stores the value of sy-ucomm.
When user interacts with the screen elements, the function code that you have assigned is filled in the sy-ucomm field which is turn gets reflected in OK_CODE.
In your ABAP programs, you should work with the OK_CODE field instead of SY-UCOMM. There are two reasons for this: Firstly, the ABAP program has full control over fields declared within it, and secondly, you should never change the value of an ABAP system field. However, you should also always initialize the OK_CODE field in an ABAP program for the following reason:
In the same way that the OK_CODE field in the ABAP program and the system field SY-UCOMM receive the contents of the corresponding screen fields in the PAI event, their contents are also assigned to the OK_CODE screen field and system field SYST-UCOMM in the PBO event. Therefore, you must clear the OK_CODE field in the ABAP program to ensure that the function code of a screen is not already filled in the PBO event with an unwanted value. This is particularly important when the next PAI event can be triggered with an empty function code (for example, using ENTER). Empty function codes do not affect SY-UCOMM or the OK_CODE field, and consequently, the old field contents are transported.
Diff bet OK-CODE and SY-UCOMM
Difference Between SY-UCOMM and OK_CODE
ok_code/ sy-ucomm usage in dialog program

Diff. b/w 3.5 and 3.0b

Hi bwers,
Please let me know the diff. b/w 3.5 and 3.0b. Tell me in an explanation way rather than sending the documents. Thanks in advance.
And one more query is i have a cube consisting of a 3requests in green and 1 red request and a 3 requests green.. Is it possible to delete that red request and if so what will be the affect ..

Hi,
the main difference of 3.5 in respect to 3.0b is the broadcasting and some other front-end functions... The datawarehousing workbench is the same.
Business content is also enhanced in 3.5....
SEM-BPS also enhanced...
Yes you can delete that red request and you will then miss this data. Check if this request needs to posted in the cube. If yes then analyze why it failed. Take the corrective measures and try to repost it.
If you don't need it then just delete it.
hope this helps,
Olivier.

Diff b/w msg mapping and interface mapping

hi
i have some doubt's:
1. diff b/w msg mapping and interface mapping
2. What is product in SLD? usually who creates the product,technical,business system??
thx in advance..

hI Smartsoft General User ,
The following r excellent websites on mapping which differentiate msg mapping and interface mapping in detail:
Excellent PDF Document on Mapping
http://help.sap.com/bp_bpmv130/Documentation/Operation/MappingXI30.pdf
Mapping Development with the ABAP Workbench
http://help.sap.com/saphelp_nw04/helpdata/en/10/5abb2d9df242f6a62e22e027a6c382/content.htm
ABAP Mappings
http://help.sap.com/saphelp_nw04/helpdata/en/ba/e18b1a0fc14f1faf884ae50cece51b/content.htm
how to create a flat file out of an IDoc-XML by means of an ABAP mapping program and the J2EE File Adapter.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/46759682-0401-0010-1791-bd1972bc0b8a
How to Use ABAP Mapping in XI 3.0
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e3ead790-0201-0010-64bb-9e4d67a466b4
These r excellent websites in SLD:
How ToHandle the SLD for SAP XI
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
How ToHandle Caches in SAP XI 3.0
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1a69ea11-0d01-0010-fa80-b47a79301290
http://www.sap-press.de/download/dateien/751/sap_press_exchange_infra_engl.pdf
cheers!
gyanaraj
****Pls reward points if u find this helpful

Diff B/W master data and transaction data

Hi all,
What is the main Diff B/W master data and transaction data. give me some example ?
Thanks in Advance
Krish...

hi krish,
MASTER Data is the data that exists in the organization like employee details, material master, customer master, vendor master etc. These are generally created once.
Master data are distributed throughout the company, they are often not standardised and often redundant. As a result it is very costly to offer efficient customer service, keep track of supply chains and make strategic decisions. With SAP Master Data Management (SAP MDM) these important business data from across the company can be brought together, harmonised and made accessible to all staff and business partners. As a key component of SAP NetWeaver, SAP MDM ensures data integrity via all IT systems.
Regardless of the industry, companies often work with different ERP and Legacy systems. The result: the business processes are based on information about customers, partners and products which is displayed in different ways in the systems. If the data are recorded manually, there are more inconsistencies: some data sets are entered several times, others cannot be retrieved by all divisions of the company.
As corporate applications are becoming increasingly complex and produce ever greater amounts of data, the problem is intensified further. Nevertheless, your employees must work with the inconsistent data and make decisions on this basis. The lack of standardised master data easily leads to wrong decisions, which restrict efficiency and threaten customer satisfaction and profitability.
In a word: in order to save costs and ensure your companys success it is necessary to consolidate master data about customers, partners and products, make them available to all employees beyond system boundaries and use attributes valid company-wide for the purpose of description.
TRASNACTION Data - These are the business documents that you create using the master data - Purchase orders, sales orders etc
http://help.sap.com/saphelp_nw2004s/helpdata/en/9d/193e4045796913e10000000a1550b0/content.htm
Regards,
GNK.

Diff b/w netweaver platform and exchange infrastructure.

Dear SDNers,
I am new to net weaver.first of all what is the diff b/w netweaver platform and exchange infrastructure.
i want to learn more about net weaver.if anybody give me the links, i would be grateful to them.
reward sure...
Senthil kumar

Hi
N/W is a set of new dimensional products that SAP uses for Integration of different Business entities like the "People" , "Information" and "Process"
XI is part of the Process Integration layer.
Regards
krishna

Diff b/w occurs 0 and occurs1?

Hi
what is the main diff b/w occurs 0 and occurs1?
thanks and regards,
sap abap.

OCCURS 0 creates an internal table with no rows pre-buit in it upon creation.
OCCURS 1 creates an internal table with 1 row pre-built in it upon creation.
The changing of OCCURS upon creation is really only benenficial when you KNOW ahead of time that a certain number (or large number) of rows WILL NEED to be created on-the-fly. In these cases, you will get better run-time execution by having an OCCURS 10000, for example.IF you know that at least 10,000 rows will be needed, this will help your prog to run faster as it does not need to expand the table EACH time (or at least until it reaches beyond 10K).
Creating the additional rows during r/t is expensive, if you can have the foresight to know in advance for large progs, you can help the run-time engine.
Don't forget points for helpful answers.

Diff b/w reference type and elementary type

hi all
can any one what is the diff b/w reference type and elementary type in data element ....
thanks
lokesh

The data type attributes of a data element can be defined by:
Specifying a domain whose attributes are copied by the data element.
Specifying a build-in type where the data type, number of places, and possibly decimal places can be directly specified.
Specifying a reference type, i.e. reference to a class, an interface, a type defined in the Dictionary, a built-in type, or a generic reference to ANY or DATA.
In the maintenance screen you can set the option you require by setting the appropriate flag (domain, built-in type, reference type) and filling in the corresponding input fields.
A reference type is a reference to another type. There are the following kinds of reference types:
Reference to a class or an interface
Reference to a type defined in the Dictionary
Generic reference to ANY, OBJECT, or DATA
Reference to a built-in Dictionary type with specification of the length and possibly also the decimal places
You can use a reference type to define the data type properties for a data element, or for typing the component of a structure or the line type of a table type.
In the field Referenced type, enter the name of a class, an interface, the generic references DATA, OBJECT, ANY, or the name of a type defined in the Dictionary. If the reference type is to be a predefined Dictionary type, choose the reference to the predefined type. Enter the number of characters and, if required, the number of decimal places.
where as
The data class describes the data format at the user interface.
If a table field or structure field or a data element is used in an ABAP program, the data class is converted to a format used by the ABAP processor. When a table is created in the database, the data class of a table field is converted to a corresponding data format of the database system used.
You can find a detailed description of the data classes allowed in the ABAP Dictionary in Overview of the Data Classes.

Diff b/w Data warehouse and Business Warehouse

Hi all,
what is the Diff b/w Data warehouse and Business Warehouse?

hi..
The diferrence between Datawarehousing and Business Warehouse are as follows.
DataWarehousing is the concept and BIW is a tool that uses this concept in Business applicaitons.
DataWarehousing allows you to analyze tons of data (millions and millions of records of data) in a convinent and optimum way, it is called BIW when applied to Business applications like analyzing the sales of a company.
Advantages- Consedering the volume of business data, BIW allows you to make decisions faster, I mean you can analyze data faster. Support for multiple languges easy to use and so on.
Refer this
Re: WHAT IS THE DIFFERENCE BETWEEN BIW & DATAWAREHOUSING
hope it helps...

Diff b/n sy-tabix and sy-indx

Similar Messages

Maybe you are looking for