Diff between TAXINJ and TAXINN

Hi Freinds
I want to know the differrences between TAXINJ & TAXINN
Regards
Dev

taxinn is condition based
As per SAP its mor sutable for new product comming like crm etc. support first will be given to Taxinn and then taxinj
in taxinn tax code dont play important role
rates for tax are dependent on condition records which have to be created in FV11
Min things to be maintained in J1id
taxinj is formulabased
in this tax code playes imp role and no need to create condition records
its the old pricing proicedure
hope things r clear
reward accordingly
Message was edited by:
        Umakant Bhangale

Similar Messages

  • Difference between TAXINJ and TAXINN

    Dear all
    I just know TAXINJ is formula based and TAXINN is condition based procedures. But what is formula based? Where and why we need to TAXINJ? What is the fundamental difference between the two?
    Can any one explain in detail?
    Thanks in advance

    Hi,
    In TAXINJ:
    The value of a particular condition is calculated from a set of predefined values ie while defining an TAX code in a TAXINJ the structure is as follows
    1 BASB - 100
    2.JVRD - 12.5% of BASB
    3. JIPC - 4% of BASB
    4. JIPL - 2% of JIPC.
    All these calculations are structured in the tax code Z1 say for example, when the user wants to have such a calcuation in his PO he need to use the tax code Z1 instead if he want to have JIPL as 8% instead of 2% then in  such a case he needs to create a new tax code as Z2 with JIPL = 8% ( formula of calculation is getting changed)
    So the tax code plays a vital role in the determination of the tax condition value in the case of TAXINJ.
    Where as in TAXINN:
    The condion records are mainted instead of hard coded percentage value in the tax code.
    Say for example JIPL for vendor V1 can be maintained as 2% with FV11 transaction similarly the same can be maintained as 8% with a combination of Vendor V1 and Plant P2 so the values of the tax conditions are fetched from Condition records rather than tax codes.
    Hope this clarifies your doubt.
    Regards.

  • CIN configuration in TAXINJ and TAXINN !!

    Friends !!
    Please help in configuring TAXINJ and TAXINN for VAT, Higher Edn.cess.If possible send me screen shots for the same and how to maintain taxcodes.
    Thanks.
    Yours sincerely,
    sreedhar

    Dear sreedhar kodali, 
    CIN Means Country India Version
    In Indian Taxing procedure, Excise Duty plays a vital role in manufacturing cenario’s. Excise related configuration is known as CIN configuration. CIN Configuration is a topic in itself. 
    Some info on CIN Configuration (it may not appear as understandable below, but if you check on screen, it will be understood better)
    Country Version India comes with four pricing procedures as follows:
    - JINFAC (Sales from manufacturing plants) 
    - JINEXP (Export sales) 
    - JINDEP (Sales from depots) 
    - JINSTK (Stock transfers
    CIN: IMG > Logistics - General > Tax on Goods Movement > India > Basic Settings > Maintain Excise Registrations
    In this IMG activity, you maintain the data relating to your excise registrations.
    - Enter each of your excise registrations, specifying a four-character code for each Excise Registration Ids
    In this activity, you maintain excise registration IDs. You create one ID for each of your business's excise registrations.
    - For each excise registration in your business create a registration ID, and state:
    - Which taxes the registration covers (additional excise duty, special excise duty, and cess) Fields for any taxes that are not covered will be hidden in transactions involving excise duty.
    - The maximum number of items to be printed on each excise invoice
    - Whether you are allowed partial CENVAT credits
    Maintain Registration ID NUMBER, Excise code number, excise registration number 
    ECC Number: Specifies the organization's ECC number. 
    Excise Registration Number:  A number assigned to each premises or location that has registered as a manufacturer with the excise authorities.
    Every entity with an excise registration number is required to keep its own excise books.
    Excise range: Specifies the excise range in whose area the excise registration is located.
    Excise Division: Specifies the excise division in whose area the excise registration is located.
    Excise Collectorate: The code of the excise collectorate in whose area the excise registration is located.
    Indicator for confirming, AED usage Additional Excise duty Percentage.
    These are livable under the additional duties of excise act. These duties are in addition to basic excise duty and special excise duty. Example - Additional Excise duty is livable in case of textile products, tobacco and sugar.
    Similarly for SED CESS Number of Items in Excise Invoice Shows the maximum number of line items that the authorities allow per excise invoice.
    Dependencies - This information is used when you create an excise invoice in Sales and Distribution (SD) for factory sales and for other movements.  This information is used to split the transfer postings' items into multiple subcontracting challans.
    Excise register set description: Description of the excise registers set.
    Partial CENVAT Credit: Indicates that the excise registration ID is allowed to credit only a portion of its input excise duty to its CENVAT account
    Dependencies - When you post a goods receipt, the system splits the input excise duty on the material into its deductible and nondeductible amounts. It posts the deductible duty to the appropriate CENVAT account, and adds the nondeductible duty to the material value.
    This information is also shown when you post the vendor's excise invoice.
    Maintain Company Code Settings. 
    In this IMG activity, you maintain the data relating to your company codes.
    Document Type for CENVAT Postings. 
    It controls, which document type the system uses when making CENVAT postings in Financial Accounting (FI). Here ED is document type for cenvat posting.
    Indicator for providing debit account overwriting 
    Debit Account Overwrite Indicator. X - Indicates debit accounts can be overwritten. Use In excise journal voucher transaction. It provides the flexibility to the user to enter the debit account of his choice depending on the nature of transaction.
    Automatic balance Indicator - Excise year start month.  The calendar month marking the beginning of the excise year.  This start month represents the month for the start of the excise invoice number range. The month 04 is entered here indicating April of the calendar year as the start month for excise invoices. Any change by the Excise authorities regarding start month should be taken care of by an entry in this field and initialization.
    Excise invoice selection procedure :Excise invoice selection type. To indicate the method opted by the company for selecting the excise invoice. It can be either earliest or latest invoices that were received. Number of excise invoices to be selected Indicates the number of excise invoices that needs to be selected in the excise invoice selection.
    Days to be considered for excise invoice selection Number of days from document date for excise invoice selection. 
    Example - If the value of this field is 20 and today is 28-03-97. The excise invoice selection will show the related invoices only for the period 08-03-97 to 28-03-97.
    Document type for TDS FI posting: Financial accounting document type for TDS posting.
    Document type for FI posting on Utilisation Financial accounting document type for TDS posting.
    Indicator for item level excise duty round off - This indicator is to be used for deciding whether Item level excise
    duty amount rounding off is required during procurement cycle. If marked 'X' then the excise duty amount will be rounded off to the nearest rupee at the Purchase order level. This will not round off the CENVAT credit to be taken. If the duty amount is less than one rupee then no rounding is done
    Rounding off of Excise duty for outgoing excise invoice - You can round off the Excise amount to be paid during an outgoing
    Excise invoice by marking this indicator as 'X'. The rounding is done at the item level for each item where the amount is greater than 1 Rupee. 
    Immediate Credit on Capital Goods - Instructs the system, when you verify a goods receipt for capital goods, to immediately post half of the input excise duty to the appropriate CENVAT accounts.  The rest is posted the CENVAT on hold account, for use in the following year.
    CVD Clearing Account - Specifies which G/L account the system credits when you take a CENVAT credit on countervailing duty in the Incoming Excise Invoices transaction.
    Exchange rate type - Key representing a type of exchange rate in the system. 
    - You enter the exchange rate type to store different exchange rates. Example - You can use the exchange rate type to define a buying rate, selling rate, or average rate for translating foreign currency amounts. You can use the average rate for the currency translation, and the bank buying and selling rates for valuation of foreign currency amounts. 
    Exchange rate type to be used for Export excise duty converts - When you are creating an Excise invoice for export sales then the exchange rate for duty calculation will be picked up using this Exchange rate type.
    Maintain Plant Settings - In this IMG activity, you maintain excise information relating to your plants.
    Plant Settings - In this activity, you maintain excise information relating to your plants.
    For each plant:
    - Specify whether it is a manufacturing site or a depot.
    - Assign it an excise registration ID. - You can assign the same ID to more than one plant, if required.
    Depot - Indicates that the plant in question is a depot. - Depots are required to prepare register RG 23D, and follow different procedures for goods receipt and invoice generation.
    - Number of goods receipt per excise invoice.
    - Multiple GR for one excise invoice, Single credit
    - Multiple GR for one excise invoice, multiple credit
    Maintain Excise Groups - In this IMG activity, you define your excise groups. For each excise group, you can also control how various excise invoice transactions will work.
    Excise Groups - In this activity, you define excise groups. An excise group allows you to maintain a separate set of excise registers and excise accounts. The RG 23A, RG 23C and PLA serial numbers are created for an excise group.
    Recommendation - Under normal circumstances, excise authorities require every business to maintain only one set of excise registers and one set of accounts.  But through exemption from the authorities, multiple books can be maintained.
    If your company has only one set of excise registers, then you need to maintain only one excise group.
    1. Create one excise group for each set of registers that you need to keep.
    2. Assign the excise groups to plants.
    3. Maintain whether this Excise group is for a depot or not. 
    If you receive only one consignment for an Excise challan then you can leave GR's per EI as blank. If you receive multiple GR's for a given Excise challan and would like to avail multiple credit mark the GRs per EI as 'Multiple GR's for one excise invoice, multiple credit'.   Alternatively if you want to availa the credit only after all the goods receipts have been made mark it as ' Multiple GR for one excise invoice, single credit'.
    4. If you want to automatically create Excise invoice during Sales cycle at the time of billing the tick the indicator 'Create EI'
    5. During depot sales if you do not want to do RG23D selection and posting separately and would like to complete RG23D selection in one step mark the indicator 'RG23D Auto post'. This will post the selected records into RG23D automatically. You cannot cancel the selection later. 
    6. If the indicator 'Default GR qty' is marked system will default the Excise challan quantity on to the Goods receipt if the Excise invoice number is given in the pop-up.
    7. If the indicator 'Folio no create' is marked system will generate Folio numbers for RG23D during receipt of excise invoice into depot.
    8. 'Automatic posting' when ticked will post the Excise invoice other movements automatically along with creation in single step.
    9. 'Create Part1 for Block Stock' when marked will create a Part1 during the receipt of material into Blocked stock .
    10. 'Create Part1 for STO' when marked will create a Part1 during the receipt of material through inter plant transfers. 
    11. 'Create Part1 for consumption stock' when marked will create a Part1 during the receipt of material into consumption stock. Excise Group Governs which set of excise registers a business transaction will be included in.
    Following is the relation between excise group, plant and registration. - In define excise groups in Customizing.
    Then, in transactions involving excise duty, for example, when you post a vendor's excise invoice, you specify which excise group you are using. This information tells the system which G/L accounts to post the excise to.  At the end of the period, when you come to prepare your excise registers, you create different sets for each excise group.
    Indicates that the plant in question is a depot. - Depots are required to prepare register RG 23D, and follow different  procedures for goods receipt and invoice generation. 
    - GR Per Excise Invoice
    - Multiple GR for one excise invoice , Multiple credit
    - Multiple GR for one excise invoice , Single Credit
    Create Excise Invoice Automatically - Instructs the system to automatically create a Sales and Distribution (SD) excise invoice immediately you create a commercial invoice or a pro forma invoice.
    The excise invoice is created in the background. - If you want to make use of this function, you must also define the
    default plant, excise group, and series groups in Customizing for Sales and Distribution (SD), by choosing Excise Group - Series Group Determination.
    RG23D Sales Creation and posting option - RG23D Automatic Option if selected will create Depot excise invoice by  posting the selection of excise invoices in single step.   If this is not selected then you need to separately do RG23D selection
    followed by PGI and then RG23D verification and posting.  If you need automatic posting of RG23D selection then the Post Goods Issue should have been completed before running RG23D selection. 
    Default excise qty in GR - If this indicator is ticked then while doing Goods Receipt using 'MB01' system will default the excise invoice quantity on to the Goods receipt document.
    Folio number for depo Posting - If this indicator is marked then while creating Excise invoice for other movements system automatically does the Verify and Post. You need not separately Post the excise invoice
    Also we can set indicator for creation of part 1 for:
    - Blocked stock 
    - Stock transport order
    - Consignment stock
    Maintain Series Group - In this IMG activity, you define the different excise series groups within your company. Series groups allow you to maintain multiple number ranges for the outgoing excise documents.  Based on excise regulations and exemptions from the authorities you can  maintain multiple number series for outgoing documents. But each of these series has to be declared to the excise authorities.
    - Define excise series groups based on type of outgoing document
    - Assign series group to excise registration ID
    - If no financial postings are required for an Excise invoice in this seris group then you tick the 'No utilization' indicator.
    - If the CENVAT has to be paid immediately and you need not wait for the Fort nightly payment then mark the 'Immediate Utilization' Iindicator.   Example - You could define two series groups, group 001 for excise invoices, and group 002 for 57 F4 documents. 
    - No account postings for CENVAT in sales cycle 
    - No utilization Flag
    If you do not need any CENVAT utilization for an excise invoice but would like to just generate an excise invoice then you need to mark this indicator.
    If the flag is checked then system will create an Excise invoice in the given Series group but there will not be any account postings or Part2 postings. 
    Immediate Utilization of CENVAT - Specifies that when you create an excise invoice, the system immediately pays the amount from CENVAT and creates the Part II entry. Such invoices will not be listed for fortnightly utilization.
    If you have both fortnightly and immediate utilization for the same excise group, the account determination within CIN IMG should point to the ED interim account.
    Account determination for immediate payment will be done exactly the same as being done for fortnightly utilization program.
    Maintain Excise Duty Indicators - In this IMG activity, you maintain the excise duty indicators. 
    IMG > Logistics - General > Tax On Goods Movement > India > Basic Settings > Determination of Excise Duty > Select Tax Calculation Procedure
    In this IMG activity, you specify which tax procedure you want to use for determining excise duties and sales taxes on input materials in  India.
    - If you use condition-based excise determination, use a copy of the tax procedure TAXINN.
    - If you use formula-based excise determination, use a copy of the tax procedure TAXINJ.
    This tax procedure also supports condition-based excise determination, so that you can work with both concurrently.
    We strongly recommend that new customers use condition-based excise determination. Note that once you have started using a tax procedure, you cannot switch to another one, otherwise you will not be able to display old documents. 
    Maintain Excise Defaults - In this IMG activity, you define which tax procedure and pricing condition types are used in calculating excise taxes using formula-based excise determination.
    If you use condition-based excise determination, fill out the CVD cond. field and leave all the others blank.
    If you use formula-based excise determination, fill out all of the fields as follows:
    - Enter the tax procedure and the pricing conditions that are relevant for excise tax processing.
    - Specify the purchasing and sales conditions types used for basic excise duty, additional excise duty, special excise duty, and cess.
    - Specify the conditions in the sales order that are used for excise rates.
    - Specify the countervailing duty condition type used for import purchase orders.
    See also : SAP Library -> Logistics -> Country Versions -> Asia-Pacific -> India -> Materials Management (MM) -> Condition-Based Excise Determination and -> Formula-Based Excise Determination. 
    IMG > Logistics - General > Tax On Goods Movement > India > Basic Settings > Determination of Excise Duty >
    Condition-Based Excise Determination 
    When you enter a purchasing document, for example, a purchase order, the R/3 System automatically calculates the applicable excise duties using the condition technique.
    Features : The standard system comes with two tax calculation procedures. TAXINN is only supports condition-based excise determination, whereas TAXINJ supports condition-based excise determination and formula-based excise  determination. Both tax procedures contain condition types that cover all of the excise duties and sales taxes applicable.
    Since the exact rates of excise duty can vary on a large number of factors, such as which vendor you purchase a material from, or which chapter ID the vendor stocks the material under, you create condition records for every sort of excise duty.
    When you come to enter a purchasing document, the system applies the excise duty at the rates you have entered in the condition records.
    Customizing : Make the settings in Customizing Basic -> India -> for Logistics – General, by choosing Taxes on Goods Movements Account -> Excise Duties Using Condition Technique and …-> Settings Determination. 
    These activities include one activity where you define a tax code for condition-based excise determination.
    Master Data - Create condition records for all excise duties that apply, and enter the tax code for condition-based excise determination in each. 
    Day-to-Day Activities -  When you enter a purchase order or other purchasing document, enter the tax code for condition-based excise determination in each line item. The system then calculates the excise duties using the condition records you have created.
    When the ordered materials arrive, you post the goods receipt and the excise invoice. The system posts the excise duty to the appropriate accounts for deductible input taxes when you enter the excise invoice. 
    Creating Condition Records for Excise Duty 
    1. In the command field, enter FV11 and choose . 
    2. Enter the condition type that you want to create a condition record for and choose . 
    The Key Combination dialog box appears.
    3. Select the combination of objects that you want to create the condition record for.   On the dialog box, Control Code means "chapter ID." So, for example, to create a condition record for a tax that applies to a combination of country, plant, and chapter ID, select Country/Plant/Control Code.
    4. Choose . 
    5. Enter data as required.  - In the Tax Code field, enter the dummy tax code that you have defined. 
    6. Save the condition record. 
    Formula-Based Excise Determination  -  When you execute a business transaction involving materials that are subject to excise duty, the system automatically calculates the duty for you.
    In order for the system to be able to determine which rate of excise duty to apply, you must have maintained all the data on the Excise Rate Maintenance screen, which you can Master Data®access from the SAP Easy Access screen by choosing Indirect Taxes Excise Rate Maintenance. 
    You maintain the following types of data:
    - Plant master data
    You assign each of your plants an excise duty indicator. You can use the same indicator for all the plants with the same excise status from a legal point of view, such as all those that are in an exempt zone. See also the information about manufacturers that are only entitled to deduct a certain portion of the duty (see Partial CENVAT Credit).
    - Vendor master data
    For each of your vendors with the same excise status from a legal perspective, you define an excise duty indicator. You must also specify the vendor type – for example, whether the vendor is a manufacturer, a depot, or a first-stage dealer. You must also stipulate if the vendor qualifies as a small-scale industry.  For each permutation of plant indicator and vendor indicator, you then create a final excise duty indicator.
    - Customer master data
    Similarly, you assign the same excise duty indicator to each of your customers that share the same legal excise status.
    Again, for each permutation of plant indicator and customer indicator, you then create a final excise duty indicator.
    - Material master data
    Each material is assigned a chapter ID. 
    - Excise tax rate
    For every chapter ID and final excise duty indicator, you maintain the rate of excise duty.
    If your business only qualifies for partial CENVAT credit, you must customize your system accordingly. 
    Let us consider an example to illustrate how the system determines which rate of excise duty to apply to a material. Assume you are posting a sale of ball bearings to a customer. The system automatically determines the rate of excise duty as follows:
    1. Looks up the customer master data to see what status you have assigned the customer. 
    Let's assume you've assigned the customer status 3. 
    2. Looks up the plant master data to see what status you have assigned the plant. Similarly, your plant has status 2.
    3. The system looks up the table under Excise Indicator for Plant and Customer to see what the final excise duty indicator is for customer status 3 and plant status 2: It is 7. 
    4. The system determines the chapter ID of the ball bearing for the plant. 
    Let’s assume the chapter ID at plant for the ball bearings is 1000.01.
    5. Finally, the system looks up the table under Excise Tax Rate to see what rate of duty applies to chapter ID 1000.01 under 
    status 7. 
    Define Tax Code for Purchasing Documents -  In this IMG activity, you define a tax code for the purposes of calculating excise duty when you enter purchasing documents. Only carry out this activity if you use condition-based excise
    determination. 
    - Create a new tax code, and set the tax code type to V (input tax). Do not make any other settings for it.
    - Assign Tax Code to Company Codes
    In this IMG activity, assign the tax code for purchasing documents to the company codes where it will be used.
    Only carry out this activity if you use condition-based excise determination.
    Classify Condition Types - In this IMG activity, you specify which condition types you use for which sort of tax. Note that this only applies to condition types that you use with the new excise determination method. The system uses this information when you create a document from  another one. For example, when you enter an incoming excise invoice from a
    purchase order, or when you create an outgoing excise invoice from a sales order, the system determines the various excise duties in the excise invoice using the information that you have entered here. In addition, when you create a purchasing document, the system only uses the condition types that you enter here.
    - For taxes on purchases, use the condition types contained in the tax procedure.
    - For taxes on sales, use the condition types contained in the pricing procedures.
    The standard system comes with sample settings for the tax calculation procedures and pricing procedures.
    Use these settings as a basis for your own.
    IMG > Logistics - General > Tax On Goods Movement > India > Account Determination
    Define G/L Accounts for Taxes - In this IMG activity, you specify which G/L accounts you will use to record which taxes.
    Requirements - You have set up G/L accounts for each of the processing keys listed below.
    - Assign an account to each of the following posting keys. The accounts for VS1, VS2, and VS3 are used as clearing accounts during excise  invoice verification.
    - VS1 (basic excise duty)
    - VS2 (additional excise duty)
    - VS3 (special excise duty)
    - VS5 (sales tax setoff)
    - MWS (central sales tax)
    - MW3 (local sales tax)
    - ESA (service tax)
    - ESE (service tax expense)
    Specify Excise Accounts per Excise Transaction - In this IMG activity, you specify which excise accounts (for excise
    duty and CENVAT) are to be posted to for the various transaction types.  Enter all the accounts that are affected by each transaction type.  If you use sub transaction types, enter the accounts for each sub transaction type as well.
    Transaction type UTLZ is used for determining accounts only while posting excise JVs and also if the payment of excise duty has to be done fortnightly.  The fortnightly CENVAT payment utility picks up the credit side accounts from the transaction types of GRPO, EWPO, and TR6C for determining the CENVAT and PLA accounts. There is no separate transaction type for fortnightly payment.
    Example:
    - Excise TT DC ind Account name
    - GRPO CR CENVAT clearing account
    - GRPO CR RG 23 BED account
    - GRPO DR CENVAT on hld account
    Specify G/L Accounts per Excise Transaction - In this IMG activity, you assign the excise and CENVAT accounts to G/L
    accounts. When you come to execute the various transactions, the system determines which G/L accounts to post to by looking at the: 
    - Excise group
    - Company code
    - Chart of accounts
    Furthermore, if you want separate account determination settings within an excise group, you can also use sub transaction types. 
    Requirements
    You have already:
    - Defined the G/L accounts
    - Defined the excise groups
    - Maintained the transaction accounts
    Activities - For each excise group, assign the excise and CENVAT accounts to G/L accounts. For most businesses, one set of accounts will suffice for all transactions.
    Note : you need not remit the CENVAT to the excise department immediately, so maintain the credit account for transaction type DLFC as an excise duty interim account. This will be set off when you remit the duty.  Config setting needed to be done in order to get the Excise Details Screen in Material Master.
    Even though this functionality is available in enterprise version, a small configuration step has to be made in Screen Sequences for Material Master.
    Following document helps you to do this configuration.
    - Material Master à Logistics General 
    1. Go to IMG Define Structure of Data Screen for each Configuring the Material master Screen Sequence.
    2. Select your screen sequence. Usually it would be 21. Select the same and click on Data Screen in the left frame.
    3. Once the data screens are exhibited, select data screen no. 15, ie. SSq. 21and Scrn 15, which is “Foreign Trade: Import Data”. Select the same and click on Sub screens in the left frame.
    4. Go to the last sub screen i.e. 21-15-6 - SAPLMGD1- 0001 and select the same. Click on tab view sub screen and ensure that the sub screen is blank.
    5. Now in the last sub screen i.e. no.6 you delete SAPLMGD1 – 0001 and instead add SAPLJ1I_MATERIAL_MASTER and in the screen no. 2205. 
    6. Save the setting.
    7. Create a Material Master and check whether in Screen Foreign Trade 
    – Import, Excise related sub screen appears. 
    A small search on SDN SD forum will help you to answer your query. 
    I will suggest you to visit  http://sap-img.com/sap-sd.htm. It will give you the overview of SAP SD module.
    Moreover there is a separate section of FAQs with answers which will help you in great deal.
    Hope this helps you.
    Do award points if you found them useful.
    Regards,
    Rakesh
    P.S. you can send me a mail at my mail id [email protected] for any specific details

  • TAXINJ and TAXINN cannot co exist ???any alternative

    hi , help and guidance is requrired urgently,
    As far as my understanding goes, TAXINJ and TAXINN cannot co exist in the same system. If you are talking about technical Upgrade, then I don't think this would be feasible since old Tax would have got posted with TAXINJ procedure with rates as defined in Tax codes and now after migration to TAXINN in same box, the system would pick value from Condition records.
    thanks
    srini.A

    Connect the WAN port of the Time Capsule to one of the LAN ports on the Netgear.
    Configure the Time Capsule to act as a bridge (not sharing a single IP address). This places all devices on the same subnet regardless of if they are connected to the Netgear or the Time Capsule.
    Configure the Netgear and Time Capsule to have different wireless network names (SSID).
    Configure the Time Capsule to use WPA2 wireless encryption and use a non-dictionary password.
    If the iBooks are G3 iBooks they can not connect to a WPA2 protected network. If they are running OS 10.3 or better they can connect to a WPA protected network. Configure the wireless encryption on the Netgear to match the capability of the devices which you want to connect to the Netgear.

  • Difference between JINFAC and TAXINN

    Dear Friends,
    Whats the difference between JINFAC and TAXINN?..............

    Dear K R,
    In RVAA01 you can maintain the condition types maintained for JINFAC. You can assign the RVAA01 to your sales area. System will pick the excise condition types from RVAA01 if tax condition maintained in RVAA01
    Further, SAP predefined country specific pricing procedure. For India JINFAC, Depot, STO pricing procedure maintained specific for India. This you can use as a ref or copy the same or you can have modifications according to your business requirements.  India specific in the sense, PP caters mainly the tax structure of India.
    Regards,
    Deepu Pillai

  • Diff between Serialization and Synchronization

    Hi I am new to java.
    Pl. give me the difference between Serialization and Synchronization.
    Thankq
    Sridhar

    Don't you look at the timestamps of posts? They could
    have been typing at the same time.
    /KajPlease stop! I'll die laughing. LOL
    Re: Diff between Serialization and Synchronization
    Author: Annie.   Apr 11, 2005 10:30 AM (reply 1 of 4)  
    Re: Diff between Serialization and Synchronization
    Author: glrao   Apr 12, 2005 8:31 AM (reply 2 of 4) I really like your sense of humor.
    xH4x0r

  • Types of  DTP , Diff between Standard and Error DTP

    Hi experts,
    What is DTP ,  are the Types of  DTP , Diff between Standard and Error DTP , how it works in BI 7.0.
    I will assign points for your valuable answers.

    Hello ,
    Data transfer process (DTP) to transfer data within BI from one persistent object to another object, in accordance with certain transformations and filters. In this respect, it replaces the data mart interface and the InfoPackage. As of SAP NetWeaver 7.0, the InfoPackage only loads data to the entry layer of BI (PSA).
    The data transfer process makes the transfer processes in the data warehousing layer more transparent. Optimized parallel processing improves the performance of the transfer process (the data transfer process determines the processing mode). You can use the data transfer process to separate delta processes for different targets and you can use filter options between the persistent objects on various levels. For example, you can use filters between a DataStore object and an InfoCube.
    Data transfer processes are used for standard data transfer, for real-time data acquisition, and for accessing data directly.
    1.Benefit: Data ‘Distribution’within BI Capabilities (from PSA or InfoProviders to InfoProviders)
    2.Improved transparency of staging processes across data warehouselayers (PSA, DWH layer, ODS layer, Architected Data Marts)
    3.Improved performance and high scalability
    4.Separation of delta mechanism for different data targets: delta capability is controlledby the DTP
    5.Enhanced filtering in dataflow
    6.Repair modus based on temporary buffers (buffers keep complete set of data)
    See these docs for more info
    [Data Transfer Process |http://help.sap.com/saphelp_nw04s/helpdata/en/42/f98e07cc483255e10000000a1553f7/content.htm]
    [Enterprise Data Warehouse (EDW)|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/67efb9bb-0601-0010-f7a2-b582e94bcf8a]
    [What's New with SAP NetWeaver 2004s - Detailed|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/910aa7a7-0b01-0010-97a5-f28be23697d3]
    [SAP NetWeaver 7.0 ETL and EII|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0b24053-654e-2a10-4180-b0e7c7b4c9f2]
    [How to Create Monitor Entries from a Transformation Routine (NW7.0)|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/50fda171-e36e-2910-9290-e3dab26c50b5]
    FAQ on SAP NetWeaver 2004s
    [Modeling the Enterprise Data Warehousing for SAP NetWeaver 2004s FAQ|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/7c2a7c65-0901-0010-5e8c-be0ad9c05a31]
    [Enterprise Data Warehousing for SAP NetWeaver 2004s FAQ|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c9f5fb91-0c01-0010-67a8-fd35946e9403]
    Thanks
    Chandran

  • Diff between dbms_profiler and dbms_trace

    Hi,
    what would be the major diff between dbms_profiler and dbms_trace? which is more useful.
    Thanks,
    Mathew

    DBMS_PROFILER is one way to analyse where the time is being spent

  • Whats the diff between express and pro??

    Just wondering what the main diff between the two are. I've used pro at school, but cant afford to get it at home. Will i still be able to use the same audio instruments like the same synths and plug ins??? Also, would i be able to run the program on a mac mini (top of the line)?

    Matt Mac 63, "Whats the diff between express and pro??" #5, 10:33pm Oct 18, 2005 CDT
    All I was saying is that if a person can afford to get Pro, they definitely should. The difference in features adds up to at least the difference in price, if not very much more.
    Having said that, Express is good value compared to most other DAW software at that pricepoint, but it is only intended as a 'Lite' version.
    Some examples, off the top of my head, of differences not made really clear in the comparison list.
    Input Objects:
    In Pro you can use Input Objects to monitor incoming signal without rec-enabling a track. That doesn't sound much, on the face of it, but what it means is you can use external FX units (hardware) as inserts in tracks (or busses) just like plugins, and bounce them with the mix. it also means you acn monitor what you are playing into Logic Pro with plugin FX applied, but record dry so you can hear your guitar with the reverb, or whatever, but still have the recorded dry signal so you can change the FX settings later.
    Pro has some very handy environment objects. The main one being the Trabsformer object. But also another extremely useful object is TouchTracks.
    If you've ever played with Ableton Live you would have noticed you can triger clips with the keyboard in all different ways (loop, gate loop, one shot etc.) Well TouchTracks does that with MIDI regions.(I have a feeling that feature in Live was modeled after Logic's TouchTracks' as it is incredibly similar.)
    They are only a few examples of a whole range of differences. If all the differences were itemized in the 'comparison chart' it would be about 3 pages long.
    All I am saying is, don't take the comparison chart as the definitive list of differences.
    yes, Express is a good basic tool and you can do a lot with it, with some imagination.
    The SOS author's claim that:
    you're paying less than a third of the price of Logic Pro and getting over 90 percent of the functionality."
    is not true in totality.
    It may be true to someone who has never dabbled in audio software before, because it takes literally years to become fully conversant with every function in Logic Pro, and no-one uses absolutely everything.
    But for serious users, who have big demands, in my opinion, Express is less than 30% of Pro's functionality.

  • Diff between issession and issystem

    All,
    Wanted to understand ..When we need to restart he DB servers in case if we change some parameters ...?
    What is the diff between issession and issystem modifiable clauses ...?
    Thanks

    Got the answer

  • Diff Between PCC and PC by Order

    Dear Team,
    Why PCC does not support Actual Cost Method and Why PC by Order does't not support Target Cost Method?
    Please give your views and comments.
    Best Regards,
    Satish

    hi
    =========================
    what is diff between billing and invoice?
    From the help for cash order, it says that the invoice will print immediately after order created, the billing will be done seperately by transaction after delivery. Can anyone explain more detail.
    =================
    based on ur query.. Billing and Invoice are one and the same.. the difference is that in general business terminology Billing means the process of crediting the customer to the certain sum of money either by cash or credit, for the goods or services purchased by him... this process consists of many other documents like credit note, debit note, invoice, etc. 
    Invoice is the Printed format of the Bill ie, the sum of amount the customer is credited is made available in the printiable format....
    dont get confused by the Billing and Invoice words.. in simple way invoice is one of the documents generated during the billing process.. Billing is a process which consists of various different documents which are generated depending on the business requirements...
    Reward if USeful
    Thanx & regards.
    Naren..

  • Diff Between Interfaces and API

    Hi to all.
    Can anybody tell me , What is the basic diff between API and Interfaces ?
    Thanks in advance

    Hi Lalit,
    Both place validation will happen. In Interface table as well as in API.
    The difference you can say..for interface you have to load the data in and invoke the import program by which it will populate data in oracle apps base table. So you have to write some DML.
    While in API you can simply use PLSQL record type and using that invoke API by which it will populate record in oracle apps base table.
    Keep in mind both ways the validation happens. It is just the approach and some part is just for legacy data conversion.
    Regards
    Prashant Pathak

  • Diff between ides and original package

    can any one tell me what are main diff between ides and original package
    thanks
    with regards,
    phani

    HI.,
                  IDES saytem is like a play ground in which we do all the transcations,But in Real time systme we dont have as many reference clients as IDES systme have,We have one reference client 0001 In real time systme as their land scape is laid as development,Testing & Production systems
              Important thing is all the screens & T.codes are sames in both
    REWARD if helpfull
    Thanks & Regards
    Narayana

  • Diff between cusztmizing and workbench request

    could u please let me know what is diff between workbench and custmizing req ?
    Regards

    Hello,
    customizing req vs workbench request
    Check this info.
    Workbench Requests
    When you change a Repository object of the ABAP Workbench, a query window appears in which you need to specify a Workbench request. You can only save the changes if you have assigned the object to a change request.
    Workbench requests and the tasks assigned to them are normally used to record changes to Repository objects and Customizing for all clients. However, you can also include client-specific Customizing.
    Whether the changes to Repository objects are transported depends on whether a transport route is defined from the current SAP System for the package of these objects. From the system settings, the system automatically determines whether the change requests are transportable and to which target system they should be transported.
    Customizing requests
    Customizing requests record client-specific Customizing settings made in a single client (the source client of the request).
    Automatic recording of configuration activities in the Customizing work for a client can be activated or deactivated for each client with Client Control. If automatic recording is active, a query window appears when you change Customizing settings, asking you to specify a Customizing request.
    Whether Customizing requests are transported or not, does not depend on the objects entered, as is the case with Workbench change requests. The Customizing requests in an SAP System (or in a client if you use Extended Transport Control) are either all transportable or all local, depending on the system setting. The system uses the standard transport layer to determine automatically whether the change requests are transportable and to which target system they should be transported. However, you can change this manually.
    Hope this resolves your query.
    Reward all the helpful answers.
    Regards,
    Jorge Diogo

  • Diff. between currency and unit fields

    Hi All,
    What is the diff. between 0DOC_CURRCY and 0CURRENCY, OUNIT and 0BASE_UOM? In which scenarios do we use each of them?
    I have a flat file which contains some values for sales and quantity but does not have any units. So I have to upload them using constant currency and unit. now, I have to create my own keyfigures for the sales and quantity. What currency and unit fields should I use i.e 0CURRENCY or 0DOC_CURRCY and OUNIT or 0BASE_UOM?
    Thanks a lot,
    James.

    hi James,
    0doc_currency, 0currency share the same master data->0currency, 0unit, 0base_uom share the same master data->0unit, the 'basic' infoobject is 0currency and 0unit, all currency and unit will have reference to these infoobjects.
    currency is used for keyfigures amount, with currency e.g usd, gbp, etc.
    unit for keyfigures quantity, with unit like KG, CM etc.
    currency tables are TCUR* and unit table T006*
    you can use any of these infoobject currency or unit in your keyfigure (RSD2) or fix value like USD etc, normaly 0doc_currcy used for document currency; 0loc_currcy for local currency, you can create your own infoobject currency/unit with RSD3.
    hope this helps.

Maybe you are looking for