Diff btw RLINK and xMII

Hi,
can anybody please clarify my doubt
what is the difference between RLINK PPPI for SAP and xMII?

Vijaya,
RLINK PPPI is developed by OSI the same people who devliver the Plant Information (PI) historian and no doubt RLINK is developed primarily for use with this system. Whereas xMII will work with any historian that supports OPC or OLEDB including PI. In short the PPPI product is probably not as flexible nor as robust as xMII.
Sam

Similar Messages

Diff btw R3 and BI reporting

Hi All
Pls explain me what is the exact diff btw R3 reporting i.e, FI,MM,SD,PS and BI reporting.
I have searched the forum but not able to find the answer
Bhanu

Hello,
You have your answer here:
BW vs. R/3 Reporting
Regards,
Jorge Diogo

Diff btw ITS and webdynpro

Hi All
Can anybody throw a flavour on Diff between ITS and webdynpro
In SRM 5.0 they are using ITS But in SRM 6.0 they are using webdynpro technology
regards
dugyala

Hello Sandeep,
I am not too technical but ITS & webdynpro technologies pertain to the web interfacing with the application servers i.e.when a user makes a transaction thro' web browser the ITS /Web dyn pro enables to reach the application server and gets back the result/retrieval of the required data in to user's presentation layer.
It is learnt that the Web dynpro technology is faster in retrieval of the data compared to the ITS.
May be the following links would be of much help
http://searchsap.techtarget.com/sDefinition/0,,sid21_gci822867,00.html for -
_ITS Pages_
http://help.sap.com/saphelp_nw04/helpdata/en/a5/1a1e3e7181b60ae10000000a114084/content.htm Webdynpro
Reward points if helpful,
Thanks & Regards,
Nagarajan

Diff btw stop and Continue

What is the diff between Stop and Continue?

<b>STOP</b>
Effect
The statement STOP is only to be used in executable programs and in the following event blocks:
AT SELECTION-SCREEN (without additions)
START-OF-SELECTION
GET
You leave these event blocks via STOP, and the runtime environment triggers the event END-OF-SELECTION.
Note
The statement STOP is forbidden in methods and, since Release 6.10, leads to an uncatchable exception during the processing of screens called with CALL SCREEN and in programs not called with SUBMIT.
Example
Ending the event blocks GET sbook after max postings have been issued, and branching to END-OF-SELECTION.
<b>CONTINUE</b>
Effect
The CONTINUE statement can only be used in loops. If it is used, the current loop pass is ended immediately and the program flow is continued with the next loop pass.
Example
A loop pass is exited using CONTINUE if the loop index sy-index is an odd number.
DATA remainder TYPE i.
DO 20 TIMES.
remainder = sy-index MOD 2.
IF remainder <> 0.
CONTINUE.
ENDIF.
WRITE / sy-index.
ENDDO.

Compression diff. btw "video" and "DV/DVCpro-NTSC"?

Hello,
I would like to export a sequence in FCP as a quicktime file. My source material is mini-Dv NTSC and was captured as such. What is the best compression setting for me to use in export--> using Quicktime conversion, in order for me to retain optimal quality. I guess I would have put compression to "none" but I don't have that option under settings --> compression settings. I am wondering between "video" and "DV/DVCpro-NTSC", I also notice that they take diffrent amount of time to export, does this have anything to do with the quality? I will be outputting to DVCAM and making transfers to BetaSP.
Thanks alot,
Lela

It's really just a habit I got into back when I was having trouble playing back long, heavy composite projects. It worked, and now, because it doesn't usually take alot of time (gotta go out for coffe and a smoke anyway) I still do it.
As for the archiving. My stuff goes to most clients on Betacam and I do make a DV copy. I just like to keep the show around for a bit, till I'm sure they aren't going to ask for another Betacam copy for a while. So maybe "archive" wasn't the right word.
Have fun
rh

Whats is the diff. btw classic badi and new badi

Hi guy,
I just found out that there is classic and new badi implementation in SE19, I would like to check out with u guys on what is the diff btw the two?
thanks.

<b>Differences Between Classic and New BAdIs</b>
Classic and new BAdIs differ in a number of features that are important for migration:
1. BAdI object
a.      With classic BAdIs, a BAdI object is created by calling a factory method, and referenced via a reference variable of the type of the BAdI interface.
b.      With new BAdIs, a BAdI object is created via the ABAP statement GET BADIas a handle for the calls of BAdI methods, and referenced via a reference variable of the type of the BAdI. A BAdI object is an instance of an internal BAdI class, which otherwise is invisible to the outside.
2. Passing comparison values for the filter
a.      With the classical BAdIs, the filter values are stored in a structure and passed with the call of the BAdI methods.
b.      With the new BAdIs, the comparison values for the filters used to search for implementations are passed when the BAdI object is created with the GET BADIstatement.
There is no way of migrating the call of the factory method one-to-one into the ABAP statement, because GET BADI can also return an existing BAdI object, which is not possible with the factory method.
3. Calling BAdI methods
Passing comparison values for the filter
a.      A classic BAdI can be called only once and the call positions are registered centrally.
b.      With new BAdIs, multiple calls are possible and the call positions are not registered centrally.
For the above reasons, an automatic call migration is not possible.
Have a look at below link.
http://help.sap.com/saphelp_nw2004s/helpdata/en/ee/6f3b42ea85b26be10000000a155106/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/0e/4d3e42fc94aa04e10000000a1550b0/content.htm
I hope it helps.
Best Regards,
Vibha
*Please mark all the helpful answers

Diff btw queue,context and xpath

plzzz provide me the links for diff btw queue,context and xpath....i have searched the sdn but didnt find find any information...!!!
and also please provide me u r usefull ideas
thnx SDNers

Hi ,
Have a look at these links for queue and context -
1. /people/riyaz.sayyad/blog/2006/04/23/introduction-to-context-handling-in-message-mapping
2. http://wiki.sdn.sap.com/wiki/display/XI/Detailedlookintothesuppressed+nodes
3. /people/venkat.donela/blog/2005/06/09/introduction-to-queues-in-message-mapping
XPath is used to navigate through elements and attributes in an XML document. It can be used in content based Receiver determination. For details refer to these links -
1. http://www.w3schools.com/xpath/default.asp
2. http://en.wikipedia.org/wiki/XPath
3. /people/prasadbabu.nemalikanti3/blog/2006/09/20/receiver-determination-based-on-the-payload-of-input-dataextended-xpathcontext-object
Regards,
Sunil Chandra

Diff btw events in reports

what is the diff btw start of selection and end of selection

HI Raja,
Check out the link.
http://help.sap.com/saphelp_nw2004s/helpdata/en/9f/db9a0735c111d1829f0000e829fbfe/content.htm
<b>START-OF-SELECTION</b>      Point after processing the selection screen
The event START-OF-SELECTION gives you the possibility of creating a processing block after processing the selection screen and before accessing database tables using a logical database. You can use this processing block, for example, to set the values of internal fields or to write informational statements onto the output screen.
At the START-OF-SELECTION event, also all statements are processed that are not attached to an event keyword except those that are written behind a FORM-ENDFORM block
<b>END-OF-SELECTION      </b>          Point after processing all lines offered
by the logical database.
To define a processing block after the system has read and processed all database tables of a logical database, use the keyword END-OF-SELECTION.
This is the last of the events called by the runtime environment to occur. It is triggered after all of the data has been read from the logical database, and before the list processor is started. You can use the corresponding event block to process and format the data that the program has stored in internal tables or extracts during the various GET events.
The following program is connected to the logical database F1S.
REPORT EVENT_DEMO.
NODES SPFLI.
DATA: SPFLI_TAB TYPE SORTED TABLE OF SPFLI
WITH UNIQUE KEY CITYFROM CITYTO CARRID CONNID,
SPFLI_LINE TYPE SPFLI.
START-OF-SELECTION.
WRITE 'Demo program for END-OF-SELECTION'.
SKIP.
GET SPFLI FIELDS CARRID CONNID CITYFROM CITYTO.
MOVE-CORRESPONDING SPFLI TO SPFLI_LINE.
INSERT SPFLI_LINE INTO TABLE SPFLI_TAB.
END-OF-SELECTION.
LOOP AT SPFLI_TAB INTO SPFLI_LINE.
WRITE: / SPFLI_LINE-CITYFROM,
SPFLI_LINE-CITYTO,
SPFLI_LINE-CARRID,
SPFLI_LINE-CONNID.
ENDLOOP.
This program fills a sorted table with data from the logical database in the GET SPFLI event, and displays them in a list in the END-OF-SELECTIOn event. Depending on what you enter on the selection screen, the beginning of the list display might look like this:
For rest of events check:
http://help.sap.com/saphelp_46c/helpdata/en/9f/db9a1435c111d1829f0000e829fbfe/frameset.htm
Reward points if this Helps.
Manish
Message was edited by:
        Manish Kumar
Message was edited by:
        Manish Kumar

What is diff btw abap 4.7 to netweaver

what is diff btw abap 4.7 to netweaver abap
example syntax.

Hi
Netweaver ABAP is with most of the code with Object oriented concepts
see the std programs like SAPMF06p or any std program
they uses all enhancement-point concept and BADI's a lot
see the links
Refer this link for ECC 5.0 & 6.0:
http://help.sap.com/saphelp_erp2005/helpdata/en/43/68805bb88f297ee10000000a422035/frameset.htm
A similar post
/message/1783778#1783778 [original link is broken]
You can go through the Release Notes for each of the versions after 4.6B (4.6C, 4.7 , ECC 5.0 & ECC 6.0)
http://help.sap.com/saphelp_erp2005/helpdata/en/43/688055b88f297ee10000000a422035/content.htm
For 4.7 SAP R/3 http://help.sap.com/saphelp_47x200/helpdata/en/12/9d78d6d8f74043a32e82be87e433b7/content.htm
Release Notes on SAP Web Application Server 6.30
http://help.sap.com/saphelp_47x200/helpdata/en/2b/64fc3e9d3b6927e10000000a114084/content.htm
http://solutionbrowser.erp.sap.fmpmedia.com/
Check these links
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/790e690c-0901-0010-7894-de8b3d91d78e
http://help.sap.com/saphelp_nw04/helpdata/en/94/c65839bec58b27e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/a8/b9623c44696069e10000000a11405a/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/c1/1253164e665b4fa635af38b66dc166/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/f5/a9673e42613f7ce10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/dc/6b7f2f43d711d1893e0000e8323c4f/frameset.htm
<b>Reward points for useful Answers</b>
Regards
Anji

Error while XI and xMII integration (Plain HTTP as sender)

Dear Friends,
   I am doing the scenario XI and xMII integration. While sending the input file from plain HTTP adapter the result comes as follows in *sxmb_moni* :
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>

<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1/>
<SAP:P2/>
<SAP:P3/>
<SAP:P4/>
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: <xMII server name></SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace=""/>
<SAP:Stack/>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
In HTTP Client Adapter for XI 3.0 it is shown as follows:
<SAP:Error><SAP:Category>XIAdapterFramework</SAP:Category><SAP:Code>MESSAGE.GENERAL
</SAP:Code>
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: <xMII server name> </SAP:AdditionalText></SAP:Error>
Please show the way to rectify this error.
Regards,
Jagan.

Dear Sudharshan,
   I'm doing the scenario which is in the following blog.
/people/dhanabal.thangavel/blog/2008/02/07/xi-and-xmii-integration--part-1 ==> XI and xMII Integration - Part 1
This is a synchronous one. So I set QOS as BE in Client Http Adapter for XI 3.0.
Scenario is HTTP <--> XI <--> xMII
The following errors are I found:
1) In RWB -> Message Monitoring
Status : Canceled with Errors
Message Details:
SOAP : call failed
SOAP :error occured: java.net.UnknownHostException: <HOST>
Exception caught by adapter framework: <HOST>
Delivery of the message to the application using connection AFW failed, due to: <HOST>. Setting message to status failed
The message status set to FAIL.
Returning synchronous error message to calling application: <HOST>.
2) Error coming in the Client Http Adapter for XI 3.0 as follows:
*URL:*
http://xxxxxx07:xx10/sap/xi/adapter_plain?namespace=http%3A//www.xxxxxxx.com/XIBatch3/10099/xMII_Integration&interface=xMII_Integration_Sync_Outbound&service=BS_BATCH3&party=&agency=&scheme=&QOS=BE&sap-user=xxxxx&sap-password=xxxxx&sap-client=xx1&sap-language=EN
*Result:*
<SAP:Error><SAP:Category>XIAdapterFramework</SAP:Category><SAP:Code>MESSAGE.GENERAL</SAP:Code><SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException:<HOST></SAP:AdditionalText></SAP:Error>
*Input XML file:*
<?xml version="1.0" encoding="UTF-8"?>
<ns1:XacuteRequest xmlns:ns1="http://www.lighthammer.com/Xacute">
   <ns1:LoginName/>
   <ns1:LoginPassword/>
   <ns1:InputParams>
      <ns1:ProductName>ProductA1</ns1:ProductName>
   </ns1:InputParams>
</ns1:XacuteRequest>
*WSDL file (Which is generated using the xMII transaction):*
<?xml version="1.0" encoding="UTF-8"?><definitions xmlns="http://schemas.xmlsoap.org/wsdl/" xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/" xmlns:s="http://www.w3.org/2001/XMLSchema" xmlns:s0="http://www.lighthammer.com/Xacute" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" targetNamespace="http://www.lighthammer.com/Xacute">
    
    <types>
        <s:schema elementFormDefault="qualified" targetNamespace="http://www.lighthammer.com/Xacute">
            <s:complexType name="InputParams">
                <s:sequence id="InputSequence">
                <s:element maxOccurs="1" minOccurs="0" name="ProductName" type="s:string"/></s:sequence>
            </s:complexType>
            <s:element name="XacuteRequest">
                <s:complexType>
                    <s:sequence>
                        <s:element maxOccurs="1" minOccurs="0" name="LoginName" type="s:string"/>
                        <s:element maxOccurs="1" minOccurs="0" name="LoginPassword" type="s:string"/>
                        <s:element maxOccurs="1" minOccurs="0" name="InputParams" type="s0:InputParams"/>
                    </s:sequence>
                </s:complexType>
            </s:element>
            <s:complexType name="Rowsets">
                <s:sequence>
                    <s:element maxOccurs="1" minOccurs="0" name="FatalError" type="s:string"/>
                    <s:element maxOccurs="1" minOccurs="0" name="Messages" type="s0:Messages"/>
                    <s:element maxOccurs="1" minOccurs="0" name="Rowset" type="s0:Rowset"/>
                </s:sequence>
                <s:attribute name="StartDate" type="s:dateTime" use="required"/>
                <s:attribute name="EndDate" type="s:dateTime" use="required"/>
                <s:attribute name="DateCreated" type="s:dateTime" use="required"/>
                <s:attribute name="Version" type="s:string"/>
            </s:complexType>
            <s:complexType name="Messages">
                <s:sequence>
                    <s:element maxOccurs="unbounded" minOccurs="0" name="Message" type="s:string"/>
                </s:sequence>
            </s:complexType>
            <s:complexType name="Columns">
                <s:sequence>
                    <s:element maxOccurs="unbounded" minOccurs="0" name="Column" type="s0:Column"/>
                </s:sequence>
            </s:complexType>
            <s:complexType name="Column">
                <s:attribute name="Name" type="s:string" use="required"/>
                <s:attribute name="Description" type="s:string" use="required"/>
                <s:attribute name="SourceColumn" type="s:string" use="required"/>
                <s:attribute name="MinRange" type="s:double" use="required"/>
                <s:attribute name="MaxRange" type="s:double" use="required"/>
                <s:attribute name="SQLDataType" type="s:int" use="required"/>
            </s:complexType>
            <s:complexType name="Rowset">
                <s:sequence>
                    <s:element maxOccurs="1" minOccurs="1" name="Columns" type="s0:Columns"/>
                    <s:element maxOccurs="unbounded" minOccurs="0" name="Row" type="s0:Row"/>
                </s:sequence>
            </s:complexType>
            <s:complexType name="Row">
                <s:sequence id="RowSequence">
                <s:element maxOccurs="1" minOccurs="1" name="Quantity" type="s:long"/><s:element maxOccurs="1" minOccurs="1" name="ProductName" type="s:string"/></s:sequence>
            </s:complexType>
            <s:element name="XacuteResponse">
                <s:complexType>
                    <s:sequence>
                        <s:element maxOccurs="1" minOccurs="0" name="Rowsets" type="s0:Rowsets"/>
                    </s:sequence>
                </s:complexType>
            </s:element>
        </s:schema>
    </types>
    
    <message name="XacuteSoapIn">
        <part element="s0:XacuteRequest" name="parameters"/>
    </message>
    <message name="XacuteSoapOut">
        <part element="s0:XacuteResponse" name="parameters"/>
    </message>
    
    <portType name="XacuteWSSoap">
        <operation name="Xacute">
            <input message="s0:XacuteSoapIn"/>
            <output message="s0:XacuteSoapOut"/>
        </operation>
    </portType>
    
    <binding name="XacuteWSSoap" type="s0:XacuteWSSoap">
        <soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
        <operation name="Xacute">
            <soap:operation soapAction="http://www.lighthammer.com/Xacute" style="document"/>
            <input>
                <soap:body use="literal"/>
            </input>
            <output>
                <soap:body use="literal"/>
            </output>
        </operation>
    </binding>
    
    <service name="XacuteWS">
        <port binding="s0:XacuteWSSoap" name="XacuteWSSoap">
            <soap:address location="http://<XMII_SERVER_NAME>/Lighthammer/SOAPRunner/Jagan/SDN_Fetch_Product_Qty"/>
        </port>
    </service>
</definitions>
Regards,
Jagan.

Is SSO possible for SAP ERP and xMII

Hi,
Is it possible to have Single Sign-On between SAP ERP and xMII.
The requirement is that the user wants to login to the SAP ERP and using the same credentials he/she should be able to use xMII (without prompting for login credentials again.)
If it is not possible why is it so, and if it is then how?
Thanks in advance.
- Ankit

Hi,
UME is User Management Engine. The UME provides the centralized user management for all Java applications and can be configured to work with user management data from multiple data sources. It is seamlessly integrated in the J2EE engine of the SAP NetWeaver Application Server for Java as its default user store and can be administered using the administration tools of the AS java.
You can configure multiple data source (DB, LDAP or ABAP) to UME for managing user data.
For more information on UME please, refer the below link as well.
http://help.sap.com/saphelp_nw2004s/helpdata/en/62/cc1940d4558f5ce10000000a155106/frameset.htm
Thanks
R.Murali

Diff materialized view and view

what is diff materialized view and view

Check these documents please
[Overview of Materialized Views|http://download.oracle.com/docs/cd/B19306_01/server.102/b14220/schema.htm#CNCPT411]
[Overview of Views|http://download.oracle.com/docs/cd/B19306_01/server.102/b14220/schema.htm#i20690]
Kamran Agayev A. (10g OCP)
http://kamranagayev.wordpress.com

Diff in TAXINN and TAXINJ

Hii All...
I am new in CIN can anyone please tell me what is the difference in these two procedure ?
Which one is generally used and why ?
And is there any difference in accounts to be maintained in both procedure.
Can any one please tell me both Tax procedure methods in details..
Do the needful help,
Thanks
Abhinay Waikar.

Hi Abinay,
ref the blw detailed info reg cin..
If SAP is implemented for any company in INDIA and the company is in EXCISABLE range then
in SAP ,CIN is implemented ( Country India Version) then
you have to implement the SAP by either of the one type of CIN
1. TAX INN - Condition based CIN implementation
2.TAX INJ -Formula Based CIN implementation
1. If you are using TAXINN then system will pick rate from condition record maintained using tcode FV11.
2. If you are using TAXINJ then rates are to be entered while creating tax code in FTXP & J1ID.
===============================
and ref the blw links which will give the complete details abt cin - tax procedure diff and config.
Cin config. Links
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/207dd2ad-bf92-2b10-a88b-e3a4a01ca7fc?overridelayout=true
http://www.scribd.com/doc/7216701/MMCIN-Customization-Document
http://help.sap.com/saphelp_erp2005/helpdata/en/09/ebf138cdd78a4be10000000a114084/frameset.htm
Diff between TAXINJ and TAXINN
Diff between TAXINJ and TAXINN
diff betwn TAXINN &TAXINJ
Re: Diff in TAXINN and TAXINJ
diff.between Taxinn& taxinj

Diff Btn EDI and ALE

Hi Experts,
What is the diff btn EDI and ALE.
Straight answers will be rewarded.
Regards,
SAI

Hi,
In simple words ...
ALE is technology for SAP mainly use to transfer data between SAP systems.
EDI is the independent technology use to transfer data between two systems, they can be SAP systems or non SAP systems.
ALE = Application Link Enable: Initially developed for SAP as an abstract layer to extract master and transactional data to be sent ellectronically to other SAP systems. These days is also being used to send data no non-SAP systems. ALE is not a protocol or anything like that, it's just abstract layer composed by a set of applications which are capable of extracting aplication data on a 1-time basis or periodically, by selection criteria or incrementally by deltas.
In contrast, EDI = Electronic data interface, this is a comunication protocol not designed by SAP but it´s an industry standard. Of course most SAP software supports EDI, but EDI it's no software but the specification of the protocol in itself.
Regards,
Padmam.

Diff between Serialization and Synchronization

Hi I am new to java.
Pl. give me the difference between Serialization and Synchronization.
Thankq
Sridhar

Don't you look at the timestamps of posts? They could
have been typing at the same time.
/KajPlease stop! I'll die laughing. LOL
Re: Diff between Serialization and Synchronization
Author: Annie. Apr 11, 2005 10:30 AM (reply 1 of 4)
Re: Diff between Serialization and Synchronization
Author: glrao Apr 12, 2005 8:31 AM (reply 2 of 4) I really like your sense of humor.
xH4x0r

Diff btw RLINK and xMII

Similar Messages

Maybe you are looking for