Diff. GL balance (FBL3N) with asset report (s_alr_87011963).

Dear Experts,
There is a certain asset class (Computer) which is not tally to the GL balance. What is the possible reason to check?
I am verifying the GL balance (FBL3N) with asset report (s_alr_87011963).  please refer below table.
                           furniture
Particulars
2014
As per F.01 (BS)
           1,098,675.23
As per Report S_ALR_87011963
           1,097,045.98
Furniture
           1,098,675.23
Difference
                 (1,629.25)
Please help me to resolve this difference issue.
Thanks in Advance.

Thanks for your valuable reply,
i have found two line items in GL balance that are not showing in asset report (which is difference amt Rs. 1629).
The document Type is "AA" of below entries.
1. Vat retention @4% for Rs. 1000/-
          asset ac  - Dr             1000
                Input vat capital Cr -
2. Vat retention @4% for Rs. 629/-
          asset ac  - Dr             629
                Input vat capital Cr -
Report is showing all documents(entries) of Doc type "AA"

Similar Messages

  • Asset report S_ALR_87011963 is not showing the asset values for perion 08

    Hi,
         The internal order number is 400011.The amount 38,300 were booked on this order. I have settled  38,050 into 7 assets hence the balance is 250 in this internal order (Work in progress 100050).
    When i check the Asset expolorer, there it is showing me this remaining value. But when i run any asset report, say Transaction code - S_ALR_87011963(Asset balances) with report date as 30/05/2008 for period 8, the asset 100050 is showing as NIL Value. But if i run it with date as 30/09/2008 for period 12, then it is showing the balance amount.Our fiscal year is frorm Oct- Sep.
    I don't understand why this difference is coming. It should show the balance 250 at the end of period 8.
    The last input on this internal order was in March 08 when I transfered most of the costs to the assets.So no reason to have a difference depending on the date of the report.
    The internal order 400011 is having status as Released at present.
    Can anyboday help me on this. Points will awarded.
    Earliest reply will be highly appreciated.
    Regards,
    Shree.j

    Hi Rau,
    Could you please me How to Upload the GL or Open Item Balances on Month to Month Basis? for this we still use FB01 for Initial Upload?
    My Client is giving the balance for last year Monthly with daily Transactions with past Posting dates obviously,do I need to Upload with same Posting dates or with Current Posting date?
    For reporting Purpose My Client would like to see Monthly Balances of Open items for Initial Upload,"is this same as Month to Month Upload you advised above"?
    What is the Difference b/w Month to Month ORr Just one Amount as total balance uploaded to SAP? which is Best Practice before Initial Upload?
    Thank you ,
    Paarthaa...

  • Recreating Balance Sheet with Crystal Reports

    Hello everyone.
    I need to recreate the Balance Sheet report with Crystal Reports.
    Which tables have the information I need?
    Thanks in advance!

    You may check this thread:
    Re: Recreating Original Reports with Crystal Reports
    All financial reports source data are extracted from those tables mentioned in that thread.
    Thanks,
    Gordon

  • Error in Balances for Individual Assets Report

    Hi,
    We are trying to generate a report through transaction code S_ALR_87011978 (Balances for Individual Assets, Including Components of Group Assets). However, we are wondering why the result always  says "No Data Was Selected" whatever asset/asset class we put as a parameter. When I checked the list of assets per group asset there are no entries. Does this mean that this report is specifically for group asset balances which is why there is no data/output generated because we do not have a group asset? Please confirm. Thank you!

    Hi,
    You are right that S_ALR_87011978 is only for reporting group asset or asset belonging to a group and the number of asset group should be entered in the asset number input field in order to output the report. If your SAP asset accounting is not using group asset it explains why the result you have been getting.
    Kind regards,
    John Chin

  • Balance sheet with alternative reporting period

    Hi everybody,
    I need to know if there is a report that allows to extract P&L data for an alternative period (eg. 07-2008 to 062009) for companies that have as financial posting period the annual standard from period 1 to period 16.
    The report must allow me to exclude year-end closing postings.
    Thanks.
    Stefania

    I posted a resolution about three or so months back
    Basically create a new infobject of account with a compound of co code - and a nav atts of alternate coa and alternative gl account
    This is to reolve the m:n realtionship of account to local account (ie it is different per co code)
    Create a bespoke extractor of SKB1 or extend the current one - and then add the compound object to your cubes

  • Asset reports- diff. results with certain restrictions

    Hi experts,
    I have problem with asset reports (RABEST_ALV01, RAHAFA_ALV01) . When I choose company code, choose sort variant 07 (company code/ asset class),report date 31st of december 2008, depr. area 01, acquisition value lower than 995 EUR and choose "list assets" I get some result - it lists some assets which correspond the selection criteria.  When I use same input data but choose "group assets" I get only some zero values for assets under construction asset classes. And what is more confusing me, when I use variant 001 (Co. code/bus. area/bal. item/B/S acc) and the same input data with group totals  it shows some values, but it doesnt include values of some asets that previeously included in report when viewing "list assets".
    They have SAP from 2000 and this year were migrated first assets.
    Customer uses version 6.0 but the same I get at another system which has version 4.6...
    Could you please advise what is wrong here?
    Thans in advance

    Thanks Ludek, it's been a while and I've forgotten they were separate forums!
    I just wanted to add a note that I've tried deleting every field and all formulas in the report.  It now prints out a blank page for it's "good" result, but I still get a prior blank page and a printer error from the blank document.  I've also removed any actual data (left the schema), and the problem still occurs.
    I've tried connecting to the HP LaserJet 1022 locally as well as via the network.  Both connections function the same way.
    Thanks!
    Chuck

  • Difference in GL balance and asset report

    Hi Experts
    The scenario is difference in the asset report and GL report for the year 2009. The year is not yet closed in asset accounting.I have run the ABST2 and it shows difference  in the GL for AUC .The asset balance report S_alr_87011964 & s_alr_87012026 report shows a difference and also verified with the asset table. The opening balances in FS10N for 2010 is C/F correctly from 2009.The GL balance is more than the asset balance due to incorrect updation in 2009.I have referred the note 104567 and 69225.There are more than thousand line items in the transaction of this asset of either t type 100,105 or 130 .The history report does not show values for this asset also since this is AUC there is no chance of depreciation not being posted.
    Since the GL balance is more than balance in the asset report I cannot pass any adjustment entry using ABF1. How can I identify which particular acquisition is not updated in the asset table and how can I fix to ensure that the asset and GL tally with each other.Kindly advice.
    Thanks
    Sunil

    Please check the link [Reconciliation ABST2 & GL|Re: ABST2- FI-AA reconciliation posting;
    It might help you.
    Regards,
    Sridevi

  • Asset report with vendor number and vendor desc wise

    Hi Gurus
    The requirement is to generate asset reports with the below fields:
    Asset class, Asset number & desc, vendor number & desc
    Suppose say all asset balances should be reported by vendor name and desc.
    I couldn't get the right results using an existing or a custom sort version. Do not want to go with a custom report or a SAP query.
    Any pointers in this regard would be helpful.
    Thanks
    Sekhar

    Hi,
    You can use table ANLA.
    Populate the asset field then go to settings tab and choose fields.
    Check the following fields given below:
    BUKRS
    ANLN1
    ANLKL
    LIFNR
    TXT50
    then execute.
    hope it helps.
    regards,
    otep

  • Report of posted Deprecation with ASSET CLASS

    Hi Gurus,
    We require a depreciation simuation report with Asset class as mandatory one.
    Could you please tell me path and t-code for the above said report.
    Regards,
    Praveen.

    Hi Praveen,
    You mentined before you wanted to view depreciation simulation, for this RASIMU02 is the report to use.
    However, if you want to see depreciation planned /and or posted you can use the Asset Balance RABEST_ALV01. If you click on the indicator  "current book value" you will see the actually posted depreciation and current Netbook Value. Also in this report you can enter the Asset Class in the selection parameters.
    Regarding viewing the note I forwarded to you previously: you can view it via the SAP Portal - http://help.sap.com/. If you go to SAP ERP tab, you will see on the right hand side pannel a link to SAP Notes. Here you can view any note.
    I hope this helps further.
    Kind regards,
    Brigitte

  • Asset Report Tables along with PO details

    Dear ALL
    I am preparing a asset report which will required details of asset purchased through purchase orders. Following field are required in columns.
    Please suggest the tables and fields to be selected which can provide the combination as required
    Asset Number
    Asset Code
    Asset Name
    Document Number
    Document Date
    Posting Date
    Bill No
    Bill Date
    ITEM NAME
    QTY
    uom
    PO NUMBER
    VENDOR CODE
    VENDOR NAME
    BASIC AMOUNT
    PO DIFF
    NET TOTAL
    MODVAT
    GROSS VALUE
    REgards
    Ajay

    Hello Ajay,
    First of all, you select asset PO from EKPO(PO items) table, where KNTTP is equal to 'A' (Asset).
    Then go to EKKO table (PO header data) for PO infos. (Vendor code etc.)
    Then go to EKBE table for invoice info with using PO number. You can select MIRO document number from EKBE where VGABE is equal to '2'.
    '2' means incoming invoice posting.
    You must get BELNR and GJAHR and then go to RBKP for Invoice header data or go to RSEG for invoice items.
    or
    You should concatenate EKBE-BELNR and EKBE-GJAHR (for example MIRO document number is 5105601096 and fiscal year is 2009, after concatenating it's being 51056010962009) and go to BKPF table and select data using
    AWTYP = 'RMRP' and
    AWKEY = <concatenate BELNR & GJAHR>
    For items on FI, you should go to BSEG with using BKPF-BUKRS, BKPF-BELNR and BKPF-GJAHR fields.
    Regards,
    Burak
    Edited by: Burak Uygur on Jul 5, 2009 10:40 PM
    Edited by: Burak Uygur on Jul 5, 2009 10:41 PM

  • Asset Report by Location wise with address & other details

    Hi,
    Can any one guide me any reports are available for Asset Report by location wise, address and
    other details.
    Thanks in advance.
    Regards,
    GB

    Hi Govind,
    I have solution for your requirement.
    Go to Tcode OAVI
    Create new entries.
    Difine a name for the sort version and enter description for the same.
    Choose fields for display in standard SAP asset reports.
    For your case enter table name ANLAV field names MENGE, STORT, and KOSTL. etc
    Here you can choose various other fields also.
    Then use this sort version while runnnig the SAP standard asset reports.
    By using this sort version you can able to to see the quantity, location and cost center fields available during any any asset balances report. So take a printout of the asset balances report S_ALR_87011964 - Asset Balances by Asset Class along with the above fields and go for physical verification
    Note: This development you can directly do it in your production system
    This will defenetely fix your requirement.
    Add Point*s, if problem resolved.
    Thanks,
    Srinu

  • Difference in asset report & g.l account balance

    Hi All,
    we have 3 assets in assets report (AW01 & S_ALR_87011994) whose balance is not matching from gl account used for asset posting in AO90.
    Could you please suggest how there can be difference in asset report & gl account balance.
    Regards
    Deepak

    Actually you need to analyze this scenario deeply as there are so many reasons why the assets are not matching with the GL account.
    1. Legacy assets
         if this is a legacy asset make sure that the GL account balance is equal to the asset balances as of the transfer year
         to do this you can compare AHS (AR02) and GL balance (FAGLB03) as of the year of transfer
         if there is a discrepancies between the GL and asset, then there is a problem during migration
    2. Manual Adjustment
         Make sure that there is no manual adjustment posted on the GL accounts as manual adjustments or postings will only reflect to GL and not in asset
         to check this go to GL line item report and analyze all transactions and make sure that there is no adjustment posted on asset GL accounts.
    3. Human Error
         It is possible that you are comparing values in asset history sheet to your gl accounts not correctly.
         to make sure check again the mapping of your asset classes to account determination and then to the GL accounts.
    Thanks!
    Jhero

  • Checking balances with asset register and Trial balance

    Hi ,
    Need to develop a report for checking balance with asset register  and Trial balance. Now asset balances and TB is not matching. We need report at Plant level. pls suggest
    Regards

    Hi,
    In the most reports you can select current book value (you first have to select ALL SELSECTIONS)
    These values are the same as on FI on your G/L accounts

  • Difference in GL Balances between two Standard Report fbl3n and fagll03

    Hi ,
    Mismatch of balances between two standard report ie.fbl3n and fagll03 . We are giving the complete example of what we are facing right now ... please go through the examples .
    ENTRY NO. 1
    We have posted one MIRO , Accounting Posting is as below : -
    PK         Description    Amount       
    86         GR/IR             1000.00               
    31         Vendor           -800.00
    50          TDS               -200.00
    ENTRY NO. 2
    We have Reversed the MIRO through MR8M , Accounting Posting was as below : -
    PK         Description     Amount       
    21         Vendor             800.00
    40          TDS                 200.00
    96          GR/IR            -1000.00
    But in Standard report FAGLL03 , .The line items of above twoi entries under GL " TDS " are showing in this way  : -
    Doc No.      PK      Ammount
    Entry 1       50          -200.00
    Entry 2       40          -200.00 -
    > ?????
    *OPEN ITEMS          - 400.00----
    > ?????
    Although in other Standard report FBL3N , the same are showing correctly as shown below
    Doc No.      PK      Ammount
    Entry 1       50          -200.00
    Entry 2       40          +200.00
    *OPEN ITEMS                0.00
    PLEASE HELP
    Regards
    Soumitra Bhattacharya

    Hi
    FAGLL03 - Display/Change Items (New)  - this report is related to ledger reporting purpose.  this reports is available after ECC 5.0.
    FBL3N - is line item display - this is only GL reports (not in ledger reporting)
    if you find any difference is values please check the report variant you are using and ledger you are activated.
    hope this will help you.
    Regards
    Ram

  • Asset report with master data fields

    It seems like that all standard asset reports can not display fields from the master record of the asset like room, user fields, etc. But those fields are there in the selection screen of standard reports. Is there standard report that can show me the asset values and fields from the asset master record?

    Hi,
    A comment from my side, for fixed asset related data like the fields you mentioned are available in asset history sheet report and all available fields are easily exported into Excel sheet if only the 'Use ALV grid' indicator under the 'Display options' is activated. Alternatively building a separate report using the query tool as mentioned.
    However from end user perspective, the former may be readily accessible and with minimum maintenance when compared to the later as it requires the knowledge of database table relationship and query creation.
    Thanks for the attention.
    Kind regards,
    John Chin

Maybe you are looking for