Diff. of Opening and Closing Stock versus Diff. of Incrs and Decrs in Stock

Hi Gurus,
Ideally Difference of Opening and Closing Stock should match with the difference of Increase and Decrease in stock.
But in our system Difference of Opening and Closing Stock is greater than difference of Increase and Decrease in stock.
Please tell me how can we solve this issue and where we are going wrong.
Thank You

Hi frnd,
I think u will have non-valuated order stock also...
it will show difference in ur balance sheet....
Pls check it..
ASSIGN POINTS IF USEFUL
Regards,
Jigar

Similar Messages

My iPad mini with OS 7.1.2 suddenly will engage in uncontrolled actions such as opening and closing pages, switching between apps, expanding and minimizing pages etc... uncontrollably and I have to shut the mini down to stop the uncontrolled actions

My iPad Mini #1 with OS 7.1.2 began uncontrolled actions recently. While reading a book in 3M Cloud App the pages would expand and then minimize on their own and then the uncontrolled action would open other apps and do the same by uncontrollably expanding and minimizing different pages in that app and then the actions would move on to another App and open it and expand and minimize pages and open different pages etc . . . Initially I thought the problem was connected to the 3M Cloud Library App so I deleted it on my Mini iPad and also in iTunes on my iMac and downloaded a fresh app to install on my Mini. However, that did not affect the problem. The uncontrolled actions start in any app and begin every time I open my Mini to the point it is becoming useless. Please help as I don't have a clue as to the cause of the problem or how to go about fixing it.

If this is still happening have you contacted APPLE support with the problem (same question to other posters).
If it is always after a certain length of time with active use - it may be overheating causing wear and tear on internal components.
Or - a bug in the software is causing sudden replay of what you just did.
Had similar issue with work owned IBM think Pad due to age and use in office area that was warm (not my choice) - it behaved as though the track mouse or keyboard was stuck - repeating same single character - open/close folders- would have to do quick shut down by pulling the pad out of dock and pulling the battery out -- solution - was to get new lap top after PC techs cleaned it and it still happened.

My iPhone 4 is randomly opening and closing apps. I have restarted and even did a reset. Any ideas how to fix? This is my lifeline as I use it for work

I have restarted holding gown the sleep button and done a hard restart using the home and sleep at the same time. I reset all my settings. My screen continuously switches from different apps and screens. In text it randomly selects letters. This happened once a few weeks ago but only lasted a couple hours. This time it's been more than 24 hours. I use it for my business so it's vital I have it working. Thanks for your help

You need to restore using iTunes you last sync with.

After using FF and closing it will not always reload and requires me to restart my computer, why?

After running FF and visiting different web sites and then closing down FF it will not restart without a restart of my computer. version 4.
I have uninstalled and re-installed FF several times to no avail.
I also have had the problem that when trying to read a complete article on Eurekalert.org I can only do so by opening in another tab rather than just being able to click on it to open.

https://support.mozilla.com/en-US/kb/Firefox+hangs - see '''Hang_at_exit'''

Adobe Forms ( Lifecycle and cloud Ver) Versus IBM Forms ( FEB and Lotus Forms)

Can sombody please educate in the advantages offered by Adobe Forms versus IBM Forms? can sombody specifically speak about the following TCO, Usabilty, Security, digital Signatures etc.?

Dear PAUL....Thanks alot for the directions you gave me, i'm really learning alot from the posts of you an STEFAN CAMERON, and as you said that many databases have a built in web services, i found some .wsdl files within the oracle database directories and i will read how to use or how to build new one.
And about the intermeadiary process solution and as i said before that i'm totally new to livecycle designer, do you mean to build two forms one connected to the database and act as a middlware and the other is connected to database through the first? forgive me for this question ,i'm new to this.
And away from data connectivity issue i posted 2 discussions at "LiveCycle Designer ES" that confused me , i'm sure it can be achieved by designer but i don't no how ,one on dealing with dropdown lists & the other on pdf's security and saving . I really appreciate if you and the others can help me with when you have enough time.
Thanks alot PAUL
Mustafa

Insert and update query to calculate the opening and closing balance

create table purchase(productid number(5) ,dateofpurchase date,
qty number(5));
create table inventory(invid number(5),productid number(5),
idate date,openingqty number(5),closingqty number(5));
Records in inventory:
1,1,'01-jan-2009', 10, 20
2,1,'03-jan-2009', 20, 30
3,1,'04-jan-2009', 40, 50
when I enter the purchase invoice for 15 qty on 02-jan-2009
after say '15-jan-09' , a new record should get inserted
with opening balance = (closing balance before 02-jan-2009)
and all the opening and closing balance for that product should
get affected.
If the invoice for 20 qty is entered for the existing date say
'03-jan-2009' in inventory , then the closing balance
for 03-jan-2009 should get updated and all the following records
should get affected.
I need the insert for the first one and update query for the
second one.
Vinodh

<strike>You can do this in one statement by using the merge statement</strike>
Hmm, maybe I spoke too soon.
Edited by: Boneist on 25-Sep-2009 13:56
Thinking about it, why do you want to design your system like this?
Why not simply have your purchases table hold the required information and then either work out the inventory on the fly, or have a job that calls a procedure to add a row for the previous day?
If you continue with this design, you're opening yourself up to a world of pain - what happens when the data doesn't match the purchases table? Also when is the inventory cut-off to reset the opening/closing balances? Monthly? Annually? Weekly? If it's set to one of those, what happens when the business request the inventory for a particular week?
Edited by: Boneist on 25-Sep-2009 13:59

According to vendor opening and closing

hi group i want to find opening and closing quantities according to the vendor and movement types.
now here i am taking the data from mkpf and mseg.
when the user enters a date for eg : user enters 20.10.2004 then to find the closing i am taking all the MBLNR less than this date and then adding them according to some criiteria.
now the problem comes that when i find the data like this way means all data less than that particular date. then obviously my performance will go down by a great margin.
so is there any alternative to it.
guys did u understand my problem or i should describe it more.
please help its urgent.

hi group i want to find opening and closing quantities according to the vendor and movement types.
now here i am taking the data from mkpf and mseg.
when the user enters a date for eg : user enters 20.10.2004 then to find the closing i am taking all the MBLNR less than this date and then adding them according to some criiteria.
now the problem comes that when i find the data like this way means all data less than that particular date. then obviously my performance will go down by a great margin.
so is there any alternative to it.
guys did u understand my problem or i should describe it more.
please help its urgent.

How do I stop Firefox from claiming to have sessionrestore errors or opening the wrong session items and/or remember the wrong window size and/or position.

Since automatically updating to version 25 Firefox is randomly opening recent tabs and windows from the browsing history, and/or randomly positioning the browser window from history.
Currently using Firefox 25.0.1 on Windows Vista and Windows 7. Problems started immediately after automatic updates to 25.0.0. Problems are most noticeable on the Vista box because it has so much screen geography (the Windows 7 box is a laptop).
Problems include:
Firefox may open the correct tabs into a properly sized and positioned window, without problem. (Not a problem, included for completeness since it does, occasionally, work without error).
Firefox open a single empty tab (about:blank, my Home page). (Listed as a problem because Firefox simply forgot the tab which was open.)
Firefox may claim it cannot open the correct tabs and pop up about:sessionrestore. Proceeding will open all tabs (usually only one or two for me). This gives the impression Firefox did not actually have a problem. But, then, often, the tab Firefox is having problems restoring is about:blank so I should hope there was no problem!
Firefox may open randomly selected recent browsing items, without other problems. This gives the impression that Firefox does not properly record recent history for about:sessionrestore. Checking History appears correct; Firefox simply reached back hours, or days, or even weeks, and restored a random session from long ago.
Any of the above may occur, but the window position and/or size will be randomly selected from another recent history item. This is most noticeable when the position is on the wrong monitor and can be annoying since Firefox simply "disappears" if (as it often is for me) that other monitor is disconnected or powered off.

If you use cleanup software like CCleaner then check the settings for the Firefox application.<br />
Also make sure that your anti-virus software doesn't mess with files in the Firefox profile folder.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
You can check for problems with the sessionstore.js and sessionstore.bak files in the Firefox profile folder that store session data.
Delete the sessionstore.js file and possible sessionstore-##.js files with a number and sessionstore.bak in the Firefox profile folder.
*Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Multiple_profile_files_created
Deleting sessionstore.js will cause App Tabs and Tab Groups and open and closed (undo) tabs to get lost and you will have to recreate them (make a note or bookmark them if possible).

Firefox keeps openining with old tabls I saved and closed a LONG time ago and not the recent ones.

Is there a way to clear the tab history, obiviously it's remembering the tabs I saved and closed from a long time ago and it defaults to this sometimes, for some reason, even when I say save and close on the ones I'm on.

This can be a problem with the file [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
Delete [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
If you see files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js then delete those as well.
See:
* http://kb.mozillazine.org/Session_Restore

MB5B Report table for Open and Closing stock on date wise

Hi Frds,
I am trying get values of Open and Closing stock on date wise form the Table MARD and MBEW -Material Valuation but it does not match with MB5B reports,
Could anyone suggest correct table to fetch the values Open and Closing stock on date wise for MB5B reports.
Thanks
Mohan M

Hi,
Please check the below links...
Query for Opening And Closing Stock
Inventory Opening and Closing Stock
open stock and closing stock
Kuber

Opening and closing stock

Hi,
    We have a requirement in which a Customized report has to be developed. The report needs to display the opening stock , Total reciept, consumption and closing stock for supplier wise material.
   We came across a standard report MB5B in which all these values are available. However inorder to display these values in a customized report we require a standard function module. Please provide us a std function module that can solve the purpose.
If the std module is not available (i dnt come across one) kindly porvide an alternaitve for the same.
Regards,
      Milan Thaker

Hi,
Use Submit Statement to get the output data from MB5b.
Ex:
Create selection screen with required filelds and use like this
SUBMIT RM07MLBD with MATNR in r_matnr
                        with LGBST eq ''
                        with BWBST eq 'X'
                        with datum in datum
                        with bukrs in bukrs
                        with werks in werks
                        with lgort in lgort
                        with charg in charg
                        with bwtar in bwtar
                        with bwart in bwart
Rgds
Aeda

Opening and closing stock at storage location level

Dear all
I need a std report which will give the opening and closing stock at storage location level, Or should I go for dev. if yes please guide me.
Regards
Samuel

Hi,
check if you can use S_P00_07000139 report, select "Display stock movement by plant (with amount) and further select Sloc from layout.
Regards,
Vikas

Opening and closing stock balances

Hi
What report can i use to show the opening and closing stock balances of materials for the last 12 months.
Thanks
Vinesh

You can view the report in MMBE.
other than this you can try
MBEWH and MARDH
Also follow the link:
Re: op.& closing stock detail in MM
Thanks
Nisha

Open order qty,Delivered qty,issued qty, and closing stock---Tables

Gurus,
I need to Prepare a report which will show open order qty,Delivered qty,issued qty, and closing stock.
Please help me with table names where i can find .
Regards
venu gopal

Hi,
Try EKPO & EKBE tables..
Thx
Raju

Opening Stock and Closing Stock Calculation

Hi,
My report requirement is to display the material, opening stock for the lower date, closing stock for the higher date and the in between all stock operations..how to fetch the opening stock and closing stock for a particular material ???.. what are the tables and fields for calculating them??..
Thanks,
Sri
Edited by: Sri on Feb 13, 2009 8:33 AM

Hi
We have done a similar reports. One showing opening stock/Closing stock and another one showing all the transactions for a particular day. What we did was we developed a program to fetch data from MARD table for unrestricted, blocked & Qulaity stock(Our requirement talks only about these 3 stocks). And we scheduled the program exactly at system time 00.00 hrs with A class job.(today's closing day stock is nothing but tomorrow's opening stock)
And for the second report which needs to pick all the transaction for a particular day, we picked it from MB51 entries. It is nothing but query between MKPF and MSEG.
I hope this helps.

Diff. of Opening and Closing Stock versus Diff. of Incrs and Decrs in Stock

Similar Messages

Maybe you are looking for