Diff PR Document types for Diff PM Order Types !!

Hi all,
We can define the PR Document type at the Order Category Level.
e.g. for Order Category 30, I can define PR document type as UB.
Now my requirement is that, I want to define PR Document type at order Type level.
which means, I have PR document type NB for Order Type PM01
and PR document type UB for Order Type PM02.
Is there any possibilty of acheiving this.
Thanks and regards,
Piyush Gupta

Hi,
It is frequently asked, see this [thread|PR type generated by maintenance orders;.
-Paul

Similar Messages

  • OURPUT TYPE FOR A SALES ORDER TYPE

    Hi,
    When i create a new sales order for the type SO, the system don't affect the output type to my order. I have to do it manualy.
    What's missing?
    In custo, I define the same output type of CS to the order type SO but is still not working.
    It's work perfectly for CS type order.
    Thanks for your quick answer.

    Hi,
    Please check whether you have maintained the condition record in VV11.
    Regards,
    Shekhar

  • Output type for Diff Orders???

    Hello guyz,
    I would like to  see the  output types used for different order types, I would appreciate if you could let me know the T-code or step by step procedure to check.
    Thanks.
    Mohammed

    Hi Mohammed,
    You may also do it this way since you want to check the output types maintained for different order types. Whether the output type is being used for a particular order type will depend on whether the condition record is being maintained.  You can check the individual output type maintained in the output procedure and then check the condition records for each key combination.
    Another way would to check would be as below
    1. Browse T682I table.Select Application as 'V1'. It will list you the access sequences for Sales and the condition tables being used for maintaining output types for sales.
    2. Take the condition table field value and browse on the condition table using SE16 to see what conditions maintained. You will have to prefix 'B' to the table value to browse. for eg if table field value is 006, then the condition table is B006.
    See if this helps you,
    Regards,
    reward points if is helpful

  • Document type for stock transport order

    Dear all;
    I have created one new purchase order document type for stock franport order from UB and given to a separate name ZUB ,but the at the time of creating one stock transport order the condition tab page is missing both in the header level and the item level. what may be reson and how to solve it ?
    Please reply .
    Regards;
    Joydeep Mukherjee

    Joydeep Mukherjee wrote:
    Dear all;
    >
    > I have created one new purchase order document type for stock franport order from UB and given to a separate name ZUB ,but the at the time of creating one stock transport order the condition tab page is missing both in the header level and the item level. what may be reson and how to solve it ?
    >
    > Please reply .
    >
    > Regards;
    > Joydeep Mukherjee
    Hi Joy,
    It could also be authorization issue, which needs to be assigned to the user. Check with your basis consultant.
    Shiva

  • For Z Po order type - Item category field is  greyed out.

    Hi MM Experts,
    I am an ABAper working on PO creation with respect to PR( PR with account assignment N)  for Z order type . The requirement includes to update item category of PO with B , But for this Z order type both PO transaction Create/Change(ME21/ME22) the field item category has been greyed out ( Non editable). I checked the SPRO setting for this order type ( SPRO-MM->Purchasing-PO->Define Screenlayout at document level .The field item category has been made as optional.
    Please let me know why this field ( item category still showing in display mode) and How to make it as editable .I need it as editable in ME22 to implement the new requirement of updating that field with item ategory B.
    Thanks in Advance
    Pravee.

    Hi All,
    Since I was creating a PO with respect to PR - after running through all the screens the item category field was becoming non editable, But during the create in one of screen the field item category was still editable, so I updated the item category with B during the create and created the PO, I have used BDC to do the same and its working fine. Thanks for all your inputs.
    Thanks
    Pravee.

  • How I can get the Billing Type for the sales order and its items

    How I can get the Billing Type for the sales order and its items. I mean from which SAP tables and how?

    Hi,
    You need to use two tables.
    First use VBFA. Enter the sales order number in the field Predecessar and the value M in SubCt field. This will give all the billing document number for the sales order items.
    Then use the billing document numbers in table VBRK, where in you can get the billing document type.
    Regards,

  • Want to change output type for 10000 sales orders through MASS

    Hi Friends,
    I would like to change the Output type in the sales order for 10000 sales orders.
    Can I do with MASS transaction. If so, Plz let me know how ?
    Is there any other process to change the output type for 10000 sales orders, as its difficult to manually in each and every sales order.
    Its very urgent issue, Plz let me know at the earliest.
    Thanks & Regards,
    Praveen Kumar. A

    This may be little tough for 10000 sales orders.
    1. You have to remove the output record for the irrelevant output record using tcode VV12 for the relevant document type. So now for the document type, the old output wont be triggered.
    2. Now, create output records for hte correct output type in VV11 tcode(for the output type BA03) for the document type. Now this output will be triggered for all the document types you are creating from now onwards.
    3. To trigger the output type BA03, in all the old orders, you just have to open these sales orders in change mode (VA02), and just save it. When u open it the output type BA03 will be automatically triggered as the master data is maintained in VV11. But because just opening all the 10000 sales orders in VA02 one by one be a mechanical task, you have to think of some tool for this.
    May be a CATT procedure can do the trick. Else, you can just create a small program, where you can upload these sales orders and the program will just open these orders in change mode and just saves it (without making any changes). Then the output will be retriggered.
    Here again, if you are printing the output directly, it is advisable to trigger the output in batch mode(Date/Time field is 1 in VV11), and then you can again trigger the printing again using the program RSNAST00 after office hours for these 10k orders.
    I hope I answered ur query.
    Pls lemme know if you need some more info. (You can reward me too...)

  • How to exclude sales office for combination sales order type/division?

    Hi experts,
    I would appreciate if you could advise: How to exclude sales office for combination sales order type/division in ECC 6.0 ?

    Hi
    Standard SAP functionality would not be able to cater to this. Ideally create a Z table with sales order type and sales office combination. Put in entries for combinations that are allowed. In Sales order program MV45AFZZ use the exit USEREXIT_MOVE_FIELD_TO_VBAK. In this exit write down the logic passing the sales office determined and the order type and check if the entry is there or not. If the entry is there then it should go on to the next step. If it does not then pass an error message. You need to use the help of your ABAP er for this.
    Thanks
    Indranil

  • New order type for a purchase order similar tu UB.

    Hi,
    I would like to know if it is possible to create a new order type for a purchase order. This new order type should work as a UB order type but "plant" and "storage location" should be indicated by default and shouldn't be changed.
    How should I proceed?
    Thanks in advance.
    Luis.

    The problem is that If I specify default values for each user (plant and storage location) It will always propose these values when using different order types. This can't be.
    Isn't there any other solution in standard sap?
    Edited by: LUIS ÁLVAREZ on Apr 26, 2010 11:25 AM

  • Descriptive flexfield for different purchase order types

    Hi,
    Can i have a descriptive flexfield for different purchase order types?
    Scenario : I have two purchase order types
    1. Blanket : done from req--> auto create --> standard PO
    2. Standard --> Direct PO
    Regards
    846691

    You can use darpan77's suggestion for context sensitive DFF. See http://oracle.anilpassi.com/context-sensitive-descriptive-flexfields.html for an example.
    However, both options you mentioned talk about standard po. Is the difference in how they are generated? (One is manual and the other is autocreated?)

  • "No parameters defined for plant and order type "

    Hello Experts,
    While doing Process order confermation geting error as "No parameters defined for plant and order type "
    Pls guide me to resolve this issue...
    Regards
    Bhupen

    Hi,
    This error is due to the confirmation parameters not maintained with respect to the plant and order type you used in the process order.
    Go to OPK4 transaction or in the path-Production Planning for Process Industries-Process Order-Operations-Confirmation-Define Confirmation Parameters.
    Maintain with respect to plant and oreder type and again try to do teh confirmation.
    Hope it helps
    Thanks
    Girish

  • Parameters defined for plant and order type

    Hi.I want to use the t-code CN25 to create network confirmation.
    After I input the Network "E00000530001" and press enter,the sap show a error message like below:
    No parameters defined for plant 1000 order type Z301
    Message no. RU010
    Diagnosis
    There are no completion confirmation parameters defined for the plant and order type that you have specified.
    Procedure
    Contact your system administrator.
    I don't know why?
    Because I have use the t-code opuv , Opjk and opu6 to configure the plant 1000 and order type(Network Type) Z301.
    So I need the experts can give me some useful advice and reference to resolve the problem.
    Regards
    Yoda

    Thanks all.
      I have checked the status of network.It's status was "MANC PRC  REL  SETC".And then run the Transaction Analysis to the Business processes "Confirm order".The result was "Allow" with green colour.
      I also check out hte confirmation parameters set up in the transaction CN25.When I check the "confirmable" checkbox in the Selection tab,I can enter the next form of "Actual data" in CN25.But when I input the Work Center and save,the sap raise an error message box with text "hihi".I don't know what is the meaning of "hihi".The detail of the error like blow:
    hihi
    Message no. 00398
    Diagnosis
    Placeholder for batch input error text, this message is not output.
    hihi
    Regards
    Yoda

  • Create 2 different delivery types for one sales order

    Hi,
    When sales agent is placing sales order at customer site, customer declares as well products or returned packages he would like to return. our business need is to combine all items (return products,  return packages and ordered items) into one sales order.
    However, we would like to split the sales order into 2 different delivery types. Sales order customizing dictates only one default delivery type per order.
    We can set up split criteria via copy control according to item category, but how can we intervene during creation of deliveries and set up a rule to determine different delivery type then default for return items ?
    Thanks,
    Assaf tzur

    Dear Assaf,
    Through copy control settings you can create two delivery types for single sales order but you have to select the delivery type manually while creating delivery.
    If you want automatic process then you need go for some Zdevelopment with the help of ABAPer.
    I hope this will help you,
    Regard,
    Murali.

  • Added custom field to VA01 should be mandatory for a particular order type

    Hi experts,
    I have created a custom field in Additional Tab B (Screen 8459) in VA01 at the item level. Now that field should be mandatory for a particular order type. If a sales order is created with that order type then the user cannot save the sales order without putting any value to the custom field. Please can anyone suggest me how to do that?
    Regards,
    SURYA

    Hi
    Sap_wiz is right. It's the same that in this [post|Re: Enhancement in VA01 Additional data B tab].
    Regards
    Eduardo

  • How the system determines the Requirement type  for one sales order

    Hi,
    SAP-SD Gurus,
    Please tell me how the system determines the Requirement type  for one sales order?
    Thanks & Regards,
    Sreenivas.P

    Hi,
    System follows some search criterial to determine the requirement type
    1. First, an attempt is made to find a requirements type using the strategy group in the material master.
    2. If the strategy group has not been maintained, the system will determine it using the MRP group.
    3. If the MRP group has not been defined, the system uses the material type instead of the MRP group when accessing the corresponding control tables.
    4. If no requirements type is found here, the system assumes a special rule and attempts to find a requirements type with the aid of the item category and the MRP type.
    5. If this is not possible, a last attempt is made to find a requirements type with the item category only.
    6. If the last attempt fails, the system declares the transaction as not relevant for the availability check or transfer of requirements.
    Please check the path
    SPRO->SALES & DISTRIBUTIONS->BASIC FUNCTIONS>AVAILABILITY CHECK AND TOR->TRANSFER OF REQUIREMENTS--->DETERMINATION OF REQUIREMENT TYPE USING TRANSACTION.
    Hope it will clarify
    regards,
    santosh

  • Completion Confirmation Parametrs for Plant and Order Type

    hi Gurs,
    Pls let me know how to define Completion and Parameters for Plant and Order Type.
    Pls let me know the IMG path also.
    Points will be rewarded......
    Ranjit Kumar

    hello SAP Gurus....
    Pls let me know how to define Completion and Parameters for Plant and Order Type.
    Pls let me know the IMG path also.
    Points will be Assigned......
    Ranjit Kumar

Maybe you are looking for