Diff Ways to Create OLAP Universe using BI/BW DataSource?
Hi Experts,
I konw there are two diff ways to create olap universe using BI/BW datasource.
1. Uisng InfoCube
2. Using BEx Query..
so.. I need you help to know when we use InfoCube and When We use BEx Query.
Can you please explain me in details and give me some pros and cons using each connection ..if there is any documentations please provide me ...
Thanks
Hi sap mdm1980,
The characteristic InfoProvider (0TCTIFPROV) refers to the technical name
of an InfoProvider. In BI, queries can be created on an InfoProvider or an
InfoProvider can be used for reporting.
An InfoProvider is generic term for all the DataTargets and Virtual Providers
(VirtualProvider or MultiProvider). An InfoProvider may or may not contain data.
Infocube is type of an infoprovider
An InfoCube describes (from an analysis point of view) a self-contained dataset,
for example, for a business-orientated area. You analyze this dataset in a BEx query.
An InfoCube is a set of relational tables arranged according to the star schema:
A large fact table in the middle surrounded by several dimension tables.
InfoCubes are filled with data from one or more InfoSources or other InfoProviders.
They are available as InfoProviders for analysis and reporting purposes.
The data is stored physically in an InfoCube
Regards
Praveen
Similar Messages
-
HT3529 Is there a way to create, store and use preset messages for use with "Messages"?
Is there a way to create, store and use preset messages for use with "Messages". I often have a recurrinig message to send, after a repeating event, and need to enter the same short message each time. It would be nice to have this short message stored and selectable so that I do not need to enter each time.
found an answer that seems to work:
https://discussions.apple.com/message/17997300#17997300 -
When Creating a universe using excel, universe is blank.
Hi,
I want to create a universe using excel sheet, my server is 64bit windows, and business objects is 3.1 SP 3 FP 2.6,
I created an ODBC connection; these are the steps I followed
1) I Navigated to C:, windows, syswow64 and ran the application odbcad32
(Windows server 2008 64 bit) and created a ODBC connection using a Excel sheet 2003.
2) Then i did the following change
<Parameter Name="Transactional Available">No</Parameter> is set to Yes under the Generic ODBC Data Source in below location
...\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\dataAccess\connectionServer\odbc\odbc.sbo
3) Then went to universe created connection using under database middle ware as microsoft -MS Excel 2003 - Odbc drivers- and selected the data source connection, test the connection server is working fine.
4) i created a universe using the connection.
But the problem is i canu2019t see the values, dimensions and measures in my universe it blank.
Please help me to overcome the issue.
Regards
AflalHi,
i went to table browser and created the universe, and exported it to the BO server, when i run the report in webi i am getting the following error.
"Microsoft Odbc driver manager data source not found and no default driver specified"
Please help.
Regards
Aflal -
Is there a way to create scripts to use tmconfig...
Is there a way to create a script to execute tmconfig and change CLOPTS parameters
for a particular server?
Here is what I would like to accomplish. Want to set "-r" option to a limited
number of servers, on an as needed basis. I do not want to bring down the environment
and update the ubbconfig file. The support people are not familiar with tmconfig.
So, I would like to create a script to turn the "-r" option on when needed and
restart only those servers and then turn it off once the debufgging is done.
Is there any command other than tmconfig, which I could use to accomplish this?
JamesIf you've got perl on your machine, you can download the tuxedo perl module and
write perl scripts to call tuxedo services. There's also a tuxedo::admin module
at cpan now.
"james mathew" <[email protected]> wrote:
>
I am sorry Roopesh. ud worked with the command 'ud32 with -Ctpsysadm
-Utpsysadm
first time when I tried, I used our tuxedo admin id instead of 'tpsysadm'.
When
tried with 'tpsysadm' it worked.
Thanks a lot.
James
"james mathew" <[email protected]> wrote:
I tried the options, but didn't help. By the way, I cannot find anydescription
on "-C" option in the reference guide.
I tried to use a client program, similar to ud, which is developed locally
to
test the services.
When I send request to '.TMIB' service, the client never gets any reply
back.
The input userd is
service_name .TMIB
TA_OPERATION GET
TA_CLASS T_SERVER
In the ULOG, I see the following error messages.
120543.DEV_DB_SRV2!BBL.543.606.0: LIBTMIB_CAT:133: ERROR: Fielded buffer
access
error 2
120543.DEV_DB_SRV2!BBL.543.606.0: LIBTUX_CAT:6031: ERROR: Unable topre-process
buffer before tranmission. Error code(12/3474)
120543.DEV_DB_SRV2!BBL.543.606.0: LIBTUX_CAT:1286: ERROR: tpreturn could
not send
reply TPESYSTEM - internal system error
I have FIELDTBLS include 'tpadm' and FLDTBLDIR include '%TUXDIR%\udataobj'
What is causing the above errors.
"roopesh" <[email protected]> wrote:
run ud32 with -Ctpsysadm -Utpsysadm .
"james mathew" <[email protected]> wrote:
Thanks Sccott. Using ud32 is what I should do.
Now, I have a problem in using ud32 because the environment uses user
authentication.
I am not able to use ud32 due to logon failures. I am getting LIBTUX_CAT
errors
6311, 6247 and 6234.
I do not know what value am I supposed to provide for "application
specific
authentication
data". I think the environment variable TPIDATA stands for the samething.
Any help is appreciated.
Regards
james
Scott Orshan <[email protected]> wrote:
For scripting, you should use ud32 to call the MIB.
james mathew wrote:
Is there a way to create a script to execute tmconfig and change
CLOPTS
parameters
for a particular server?
Here is what I would like to accomplish. Want to set "-r" option
to
a limited
number of servers, on an as needed basis. I do not want to bring
down
the environment
and update the ubbconfig file. The support people are not familiarwith tmconfig.
So, I would like to create a script to turn the "-r" option on
when
needed and
restart only those servers and then turn it off once the debufggingis done.
Is there any command other than tmconfig, which I could use to
accomplish
this?
James -
How to create olap cube using Named Query Table in Data source View
I Create on OLAP Cube using Existing Tables Its Working Fine But When i Use Named Query Table with RelationShip To other Named query Table It Not Working .So give me some deep Clarification On Olap Cube for Better Understanding
ThanksHi Pawan,
What do you mean "It Not Working"? As Kamath said, please post the detail error message, so that we can make further analysis.
In the Data Source View of a CUBE, we can define a named query. In a named query, you can specify an SQL expression to select rows and columns returned from one or more tables in one or more data sources. A named query is like any other table in a data source
view (DSV) with rows and relationships, except that the named query is based on an expression.
Reference:Define Named Queries in a Data Source View (Analysis Services)
Regards,
Charlie Liao
TechNet Community Support -
Is there any way to create discussion board using JSP
Hi! i'm doing a project using jsp is there any way to create a simple discussion board like the one here? can anyone who knows pls forward some links that teaches me how to do it step by step. Thanks for your help and have a nice day :)
From the UK! -- PC Plus, August 2000 Issue:
How to build a JSP Message Board
http://www.pcplus.co.uk/media/pcplus/pdf/166/pcplus.166.progworld.java.pdf
You'll get a nice 2-page pdf file, taken directly from the magazine
--Dave -
Best way to Create Shared Folder using Powershell
Hi
Does anyone have any recommendations on creating a shared folder using PowerShell? I've used new-item to create a folder, is there a way to share it and give specific name?
CheersHi Shane,
I’m writing to just check in to see if the suggestions
were helpful. If you need further help, please feel free to reply this post directly so we will be notified to follow it up.
If you have any feedback on our support, please click here.
Best Regards
Anna
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
I made some objects in Cinema 4D and I tried to import them into After Effects CC 2014. I get an error saying 'Cannot find Adobe Premiere Pro Dynamic Link'. So I tried it in AE CC and that worked. However, I want to create a form object and then use that as a particle for Trapcode Particular. Is this even possible?
Thank you for any help!There are also size limitations or rather suggestions for particle size. If I were creating an animated 3D shape using Form or C4D and wanted to use it as a particle I would keep the size of the particle about 1/6 to 1/8 of the comp size. You would create a new comp for your particle, animate it, then nest the particle comp in your main comp, turn off visibility, and then use it as a particle in Particular.
-
Is there a way to create Preflight Profile using Java Script / C++ SDK?
Hi ,
I need to dynamically create preflight profiles depending on the analysis of the document. I am using Adobe's C++ SDK to access the Adobe Acrobat Pro X as a server to perform the actions I need to. Maybe I failed in my search for the function to create a preflight profile. Is there any other SDK to create the preflight proflies within the Adobe Acrobat environment.Hi,
As discuss above , we have to create the XML response ,before that first you have to
GetConfiguration() details of existing virtual network.
string.format("@<NetworkConfiguration xmlns:xsd='http://www.w3.org/2001/XMLSchema' xmlns:xsi='http://www.w3.org/2001/XMLSchema-instance' xmlns='http://schemas.microsoft.com/ServiceHosting/2011/07/NetworkConfiguration'>
<VirtualNetworkConfiguration>
<Dns />
<VirtualNetworkSites>
<VirtualNetworkSite name=""{0}"" Location=""{1}"">
<AddressSpace>
<AddressPrefix>10.0.0.0/8</AddressPrefix>
</AddressSpace>
<Subnets>
<Subnet name=""Subnet-2"">
<AddressPrefix>10.0.0.0/11</AddressPrefix>
</Subnet>
</Subnets>
</VirtualNetworkSite>",Networkname,location)+(@"<VirtualNetworkSite name=""demodsf1"" Location=""West Europe"">
<AddressSpace>
<AddressPrefix>10.0.0.0/8</AddressPrefix>
</AddressSpace>
<Subnets>
<Subnet name=""Subnet-1"">
<AddressPrefix>10.0.0.0/11</AddressPrefix>
</Subnet>
</Subnets>
</VirtualNetworkSite> </VirtualNetworkSites>
</VirtualNetworkConfiguration>
</NetworkConfiguration>")
you have to append the node for existing node with new values , i got it its adding new virtual network
Best regards, -
Is there a way to create address labels using data from a Numbers document?
I'd like to print mailing labels for holiday cards and my wife created the list in a Numbers spreadsheet.
Is there any way to export to Pages or some other label printing application?
Thanks.Righty-ho. This is based on a spreadsheet like this with named columns in Numbers 3.5. (The rows must be consecutive - the script moves on as soon as it sees an empty row):
With the spreadsheet open, run the following AppleScript. It will create a group called Christmas List in Contacts, and then import the name and address data from the spreadsheet, adding each person to the group:
tell application "Numbers" to tell front document to tell active sheet to tell table 1
set all_contacts to {}
set row_count to count rows
repeat with each_row from 2 to row_count
set nu_contact to {}
set first_name to value of cell each_row of column "First"
if first_name is missing value then exit repeat
copy first_name to end of nu_contact
copy (value of cell each_row of column "Last") to end of nu_contact
copy (value of cell each_row of column "Address1") to end of nu_contact
copy (value of cell each_row of column "Address2") to end of nu_contact
copy nu_contact to end of all_contacts
end repeat
end tell
tell application "Contacts"
set group_exists to (every group whose name is "Christmas List")
if the result is {} then
make new group at end of groups
set name of the result to "Christmas List"
save
end if
repeat with each_contact in all_contacts
activate
set nu_person to (make new person with properties {first name:item 1 of each_contact, last name:item 2 of each_contact})
save
make new address at end of addresses of nu_person with properties {street:item 3 of each_contact, city:item 4 of each_contact}
save
add nu_person to group "Christmas List"
save
end repeat
end tell
Contacts will look like this:
With the Christmas List group selected in Contacts, go to the Print menu and choose the label format you want:
Once the labels are printed, select all the names in the Christmas List Group and press the delete key:
Click the middle "Delete" button and the contacts will be gone.You can then delete the Christmas List group itself.
This can also be done in Numbers 09, but the script would have to be modified slightly.
Hope it helps,
H -
Is there any way to create installation files using java
Hi,
can we create write any program to install our product in linux. I thnk we can do it using VJ++, but for windows.
thanq
chanducan we create write any program to install ourproduct in linux.
Yes, you can write any program to install your
product in linux.Visual J++ might not really be the best choice though. -
Is there a way to create an image using UPC lines?
Is there anyway to create an image by using UPC lines? Maybe a plugin........?
Good day!
What do you mean by
create an image by using UPC lines
Could you post (a link to) an example?
Regards,
Pfaffenbichler -
Quickest & Easiest Way To Create & Publish website using Illustrator Designs?
HI there
I am a newbie & more conversant in premier pro than webiste development, however I though I would give it a go. I have watched that many Lynda.com video's I think I have confused myself!
I have created all of the pages I need for my website in Adobe Illustrator & saved them as illustrator documents & HTML also.
I have tried just using a blank page HTML with no columns & liquid centre, however whenever I look at the view my design is only showing up to the left hand side of the screen, not centred at all. Am I meant to put it into a container, or a box around it so it will expand with different browser sizes
I am concerned that perhaps the design itself is too fixed, ie 856 x 554 & that is the problem?
I, ridiculously, have a friday deadline with this & I am feeling fairly pathetic given I am stuck on the 1st step!(Wel not quite, I managed the design & vid editing!)
Thanks
MandiQuickest and Easiest isn't always best.
Start here: Without some basic knowledge of HTML and CSS, you will be lost.
HTML & CSS Tutorials - http://w3schools.com/
Then work through this tutorial -
Taking a Fireworks (or Photoshop) comp to a CSS based layout in DW
Part 1 --
http://www.adobe.com/devnet/fireworks/articles/web_standards_layouts_pt1.html
Part 2 --
http://www.adobe.com/devnet/fireworks/articles/web_standards_layouts_pt2.html
If you get stuck on anything, feel free to come back and post specific questions.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb
http://alt-web-design.blogspot.com/ -
Is there a way to create ADF Table using a bean
Hi,
I am using JDev 11g 11.1.1.2.0.
I am reading an excel sheet and want to generate an ADF table using the same. I already have hold on excel data.
But when I go through the RichTable API, I find that there is no method to add Columns and Rows. Most or all the methods work on the table UI Looks attribute.
Any suggestion? Am I missing a method OR 2 here?
Pls note: The excel (CSV file) using which I am populating my table, will vary for different user. i.e.
say user 1 will upload a CSV file with 7cols and 100 rows while
user 2 will upload the CSV file that has 2 cols and 100 rows.
Hope this makes it clear of my requirements and why I want to populate the table from a bean.
Thanks in advance.
Edited by: user8925296 on Feb 24, 2010 7:09 PMThanks a lot Joseba, I am now atleast getting column headings. I have questions on the soln given but first here is the code that I use
PS NOTE: on my .jpsx file I have dragged dropped an ADF table, removed its default columns and have bounded it with my bean attrib '_dynaTbl' that is used below.
// ---- Few imports that I use
import oracle.adf.model.adapter.dataformat.csv.CSVParser;
import oracle.adf.view.rich.component.rich.data.RichColumn;
import oracle.adf.view.rich.component.rich.data.RichTable;
import oracle.adf.view.rich.component.rich.data.RichTableUtils;
import oracle.adf.view.rich.component.rich.output.RichOutputText;
public String getFileData() {
try {
FacesContext fc = FacesContext.getCurrentInstance();
ExpressionFactory elFactory = fc.getApplication().getExpressionFactory();
ELContext elCtx = fc.getELContext();
CSVParser pfile = new CSVParser(getFile().getInputStream());
ArrayList colData = new ArrayList();
ArrayList colHdr = new ArrayList();
pfile.nextLine();
String colArr[] = pfile.getLineValues();
int colLth = colArr.length;
int rows =0;
/* _dynaTbl.setVar("row"); */
for(int hdr=0 ; hdr < colLth; hdr++){
RichColumn colNm = new RichColumn();
colNm.setHeaderText(colArr[hdr]);
colNm.setRowHeader(true);
colNm.setRendered(true);
colHdr.add(hdr, colNm);
colNm.setVisible(true);
while (pfile.nextLine()){
String arr[] = pfile.getLineValues();
int u=0;
while(u < colLth) {
// CoreColumn colNm = (CoreColumn)app.createComponent(CoreColumn.COMPONENT_TYPE);
//colNm.setId(colArr[ u ] ) ;
//CoreOutputText rdata = (CoreOutputText)app.createComponent(CoreOutputText.COMPONENT_TYPE);
RichOutputText rdata = new RichOutputText();
rdata.setValue(arr[ u ]) ;
rdata.setVisible(true);
rdata.setRendered(true);
rdata.setId((String)colArr[ u ] + u) ;
// System.out.print("\t\t" + rdata.getValue());
/* ValueExpression value = elFactory.createValueExpression(elCtx, "#{row.attrName}", Object.class);
rdata.setValueExpression("value", value);
((RichColumn)colHdr.get(u)).getChildren().add(rdata);
//colNm.getChildren().add(rdata);
// _dynaTbl.setHeader(rcol);
// _dynaTbl.setVisible(true);
// _dynaTbl.setValue(arr[ u ]) ;
// _dynaTbl.getChildren().add(colNm);
u++; rows++;
//break;
_dynaTbl.setRows(rows);
for(int hdr=0 ; hdr < colLth; hdr++){
_dynaTbl.getChildren().add((RichColumn)colHdr.get(hdr));
_dynaTbl.setFetchSize(10);
_dynaTbl.setVerticalGridVisible(true);
System.out.print("\n\t child count" + _dynaTbl.getChildCount());
_dynaTbl.setAllDetailsEnabled(true);
_dynaTbl.setShowAll(true);
_dynaTbl.setRowBandingInterval(1);
_dynaTbl.setRendered(true);
for(int i =0; i< _dynaTbl.getChildCount() ; i++) {
System.out.print("\n\t count within child:" i " is :" +
((RichColumn)(_dynaTbl.getChildren()).get(i)).getChildCount());
System.out.println(" isAllDetailsEnabled:"+ _dynaTbl.isAllDetailsEnabled());
System.out.println(" isRowAvailable:"+ _dynaTbl.isRowAvailable());
System.out.println(" isRowAvailable i:"+ _dynaTbl.isRowAvailable(i));
System.out.println(" isShowAll i:"+ _dynaTbl.isShowAll());
}catch (Exception exp){
exp.printStackTrace();
return "Done";
Here is the problem. I am able to view only column headings but data is not visible.
1. I get below out put for as many columns that I use
a.
count within child:4 is :24 isAllDetailsEnabled:true
isRowAvailable:false
isRowAvailable i:false
isShowAll i:true
b. Why is table data missing. What more do I need to do?
Kindly guide.
Thanks a lot in advance. -
IIF not accepting Dimensions in a OLAP Universe using Bex Query
Hi,
We have an issue with Prompted object , u2018IIFu2019 expression is not taking dimension object in u2018Thenu2019 clause, it takes only the measure object.
Below are the two expressions one with measure and other with dimension, object with measure works fine and dimension doesnu2019t.
Dimension u2013 Prompted trend (Fails with Error)
<EXPRESSION>IIF(@Prompt('Select a time period trend view','A',{'Fiscal_Year','Fiscal_Year_and_Quarter','Fiscal_Year_and_Month','Calendar_Year', 'Calendar_Year_and_Quarter','Calendar_Year_and_Month'},mono,constrained)= Fiscal_Year,@Select(Fiscal Dates\Fiscal Year),A)
</ EXPRESSION >
Measure u2013 Prompted trend (Works fine)
<EXPRESSION>IIF(@Prompt('Select a time period trend view','A',{'Fiscal_Year','Fiscal_Year_and_Quarter','Fiscal_Year_and_Month','Calendar_Year', 'Calendar_Year_and_Quarter','Calendar_Year_and_Month'},mono,constrained)= Fiscal_Year,@Select(Actuals\Actual Amt (Local)),0)
</EXPRESSION>
Has anyone tried to do this in a different way
Thanks,
AnuHi,
just to let you know - not overlooked - will look into this.
Ingo
Maybe you are looking for
-
While copying a cd to my computer
Ok I was copying a cd to my pc I had to choose from different versions and some how I chose the spanish version, so I stopped the import. But every time I try to reimport it I still get the spanish version of the song names how do I change that?
-
Seagate Esata driver for mac 10.6
hey, I have a seagate external drive its the 300TX2 series. I found the drivers for mac 10.4 but I have 10.6 and it won't install because of that is there a way to install the drivers so I can use the PCI card and the drive (The drive is ESATA only)
-
When performing a new book, how to see specific rolls in upside of screen?
I will appreciate if somebody can help me!!! I'm trying to do a new book with the photos of the last year to gift it to a family. Already organize the library by rolls of events but when go to the book and try to get the Pic's it show another file of
-
Hi, I have a problem with connecting flat files(.txt, .xml, .csv, .xls, etc...) which is existing in application it's self, using jdbc connection. After searching I found some suggestions below. 1)xlsql 2)JDO I tried with first one (xlsql), below is
-
how can i update when i have a slow connection? to update my ipad would take 5 hours to download the file and the server times out before then. when i restart, the process starts all over again- not where it left off so will fail again!