Diffence between ck11n and ck40

1.what is the difference between ck11n and ck40
2.what is the use of product version

Hi Madhu,
CK11N is used to release Cost estimate for individual material then
CK24 for Markup & Release in Material Master Data
CK40 will carry calculate& Mark up & Release in one step and update material master data.
It is also carreid for all the material.
Best Regards
Ashish Jain

Similar Messages

Diffence between OVERLOADING and POLYMORPHISM

hi all
i need the differneces between
overloading and polymorphism (atleast 3 differences :)))
regards,
venkat.

can u send me any list of core java questions if u have. http://www.catb.org/~esr/faqs/smart-questions.html#writewell
How To Ask Questions The Smart Way
Eric Steven Raymond
Rick Moen
Write in clear, grammatical, correctly-spelled language
We've found by experience that people who are careless and sloppy writers are usually also careless and sloppy at thinking and coding (often enough to bet on, anyway). Answering questions for careless and sloppy thinkers is not rewarding; we'd rather spend our time elsewhere.
So expressing your question clearly and well is important. If you can't be bothered to do that, we can't be bothered to pay attention. Spend the extra effort to polish your language. It doesn't have to be stiff or formal - in fact, hacker culture values informal, slangy and humorous language used with precision. But it has to be precise; there has to be some indication that you're thinking and paying attention.
Spell, punctuate, and capitalize correctly. Don't confuse "its" with "it's", "loose" with "lose", or "discrete" with "discreet". Don't TYPE IN ALL CAPS; this is read as shouting and considered rude. (All-smalls is only slightly less annoying, as it's difficult to read. Alan Cox can get away with it, but you can't.)
More generally, if you write like a semi-literate b o o b you will very likely be ignored. So don't use instant-messaging shortcuts. Spelling "you" as "u" makes you look like a semi-literate b o o b to save two entire keystrokes.

Amount difference between ck11n and ck24

Hi,
I am running CK11N for a material and the price is Rs.15000.But when i do mark and release in CK24 the value is only Rs.100.After releasing the cost estimate ,system updates the price for current period and year in costing 2.When i click the std price tab in costing 2 it shows the price of Rs.15000(i mean ck11n price) why it is happening?
Regards,
Guru

Hi,
Check (txn. OKTZ) if all cost components are relevant for inventory valuation. Usually both fixed and variable cost of a cost component should be relevant.
Cheers,
Szymon

Diffences between 9i Standard and Enterprise edition

Can anyone give me the Diffences between 9i Standard and Enterprise edition. Is there any document available for this.
Thanks,
Sunil.

Here's the Oracle white paper on the subject...
http://otn.oracle.com/products/oracle9i/pdf/9idb_rel2_prod_fam.pdf
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

Diffence between sap ecc5 and ecc5(IS Retail

Dear all
what is major diffence between sap ecc5 and ecc5(IS Retail)
thanks
venkat

Hi,
ECC5 ( IS Retail) contain SAP Industry-Specific Components IS -Retail
check the release notes for both ECC5 and ECC5 IS - Retail
login into service.sap.com -> Release & Upgrade Info -> Release Notes ->SAP Industry-Specific Components ->
SAP for Retail
regards,
kaushal

Diffence between XI 3.0 and PI7.0

Hi
I am having one dought. what are defferences between XI 3.0 and PI 7.0 at Mapping and in IR and ID.

Hi,
1.All new features for XI 7.0 are almost same as for XI 3.0 at least till SPS 19.
Some differences are as follows:
Adapter Enhancements like JMS, JDBC, Oracle-JDBC and CIDX Enhancements
New Conversion Agent,
Receiver Determination Enhancements
Multi mapping
User defined enhancements
Unbounded Processes (Integration Processes).
2. One more difference is the ABAP stack (which is 7.0 and not 6.40) but from the developer point of view there is nothing new.
3. PI 7.0 = XI 7.0
4. For each SP in XI3.0 there is a corresponding SP being released for PI (XI 7.0). A comparison of the service packs in 2004 and 2004s:
In 2004 - In 2004s
SP12 & lower = SP04
SP13 + 14 = SP05
SP15 = SP06
SP16 = SP07
SP17 = SP08
SP18 = SP09
5. XI3.0 is based on WAS(web application server)6.40 - NW2004
PI7.0 is based on WAS(web application server)7.0 - NW2004's
There is not much difference between XI 3.0 with latest Service Pack i.e. 20 or 21 and PI 7.0
The main difference between 3.0 and 7.0 is the GUI in SLD. But, it is pretty easy to adopt. All other components, e.g. IR, ID, RWB, should virtually be identical.
7.0 also contain some SCM contents not available from 3.0. For most of us, this is a non-issue.
In 7.0 we can schedule a background job and edit the payload.
XI3.0 is based on WAS(web application server)6.40 - NW2004
PI7.0 is based on WAS(web application server)7.0 - NW2004's
Currently SP 21 for XI 3.0 and SP12 for PI 7.0 is the latest one.
ref:http://help.sap.com/saphelp_nw04/helpdata/en/cf/9844428e9cbe30e10000000a155106/frameset.htm
See This Thread on the Same Discussion
Diff between XI and PI
http adaptor on which factors we will use
differences between xi 3.0 and pi 7.0
Difference/ changes from XI 3.0 to PI 7.0
give me main advantages of XI-7.0 TO XI-3.0
XI 7.0 vs Xi 3.0
XI/PI
XI vs. PI
XI 3.0 vs. PI (XI 7.0)
Difference/ changes from XI 3.0 to PI 7.0
moving from XI 3.0 to PI 7
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/xi%2band%2bpi%2bglossary
Reward points if helpful.
Thanks,

Difference between ck40n and ck24.

frndz,
Pls tell me difference between ck40n and ck24.
Regards,
Srini

Hi,
Ck11n /Ck40 n is both are similar to estimate the cost,Costing will be updated periodically, and released by using CK24.
Once release the cost periodically it not possible to update product cost between the period.
Hope you will get some idea,
Thanks and regards
E.Rambabu

What is the diffrence between extends and creating new object?

HI ALL,
what is the diffrence between extends and creating new object?
meaning
class base{
class derived extends base{
class base{
class derived {
derived(){
base var = new base();
can u people tell me diffence from the above examples.
THANKS.
ANANDA

When you create a new object you have to supply the class to which that
object belongs. A class can extend from another class. If it does so
explicitly you can define the 'parent' class from which the class extends.
If you don't explicitly mention anything, the class will implicitly extend
from the absolute base class named 'Object'.
Your example is a bit convoluted: when you create a Derived object,
its constructor creates another object, i.e. an object from the class from
which the Derived class extends.
Extending from a class and creating an object don't have much in common.
kind regards,
Jos

What is the difference between component and sub-assebly?

Experts,
What is the diffence between sub-assembly and a component?
in my report if user enters component it should display sub-assembly. if it is reverse should not get component for that.
is there any function module for this?
I tried in CS15 but not get exact information.
please help me...

Hi,
component is nothing but one of small product. So many no.of products could combine and they will give one big product. For that particular component one or more sub-assemblies can be used.
Sub-assembly will contain one or more no of small contents.
14' inch boltnut is one of sub-assembly for the one big component.
In that boltnut sub assembly might contains bolt , nut and washer. That is called sub-assembly.
Thanks,
Shankar

Diffence system.current_item and system.cursor_item

hi
Diffence system.current_item and system.cursor_item
and diff between decode and case stmt Which is best to use.
thanks

the :system.current_<...> - variables are for upgrade-compatibility with older forms. Don't use them.
Forms-Help :
Note: SYSTEM.CURRENT_ITEM is included for compatibility with previous versions. Oracle recommends that you use SYSTEM.CURSOR_ITEM or SYSTEM.TRIGGER_ITEM instead.

Difference between EP6 and EP7

Hi Experts,
Can anyone tell me the major difference between EP6 and EP7 ?
Thanks in advance.

Dear Vinay,
Notice the below threads to get major understanding on diffences between EP versions.
difference between EP6 and EP7
Urgent : Difference between EP6 and EP 7?
Difference between EP 6.0 and EP 7.0
what is difference between EP 6 and EP 7 as well as Netweaver 2004 &20004s
Regards
Ankur
P.S. Points for useful answers.

Difference between doPost and doGet

Can anyone tell the diffence between the following 2 implementations.
Case -1
doPost{
doGet();
Case - 2
doGet{
doPost();
}

doGet has its own constraint which you would know. Other than that there wont be any data truncation...
And regarding the first question u have asked, I am not too sure what will happen. I think the Server will respond saying "recursive call done". I think this will create Memory Problems

Difference between gsm and G3?

Using N8. At the network option in networkmodus i have the option between dual mode, 3G and GSM...what are the diffences between those?
Solved!
Go to Solution.

GSM = 2G (GSM) network use only (doesn't try to connect to 3G)
3G = 3G (WCDMA = UMTS) network use only (doesn't try to connect to 2G)
Dual mode: Tries to use 3G primarily, but if not found, tries to find a 2G network, instead

Difference between Null and null?

What is the difference between null and NULL?
When is each used?
Thanks,

veryConfused wrote:
There is a null in java, but no NULL. null means no value. However, when assigning value, the following is different:Although the empty String has no special role. Null means, the referential type is not assigned (doesn't refer) to a specific object. The empty String is just another object though, so seeing it or pointing it out as something special when it actually isn't at all (no more special than new Integer(0) or new Object[0]) just adds to the confusion.

7344 servo motion switching between open and closed loop operation

I have a custom end-of-line test system presently using a 4-axis 7344 servo controller to perform various functional tests on small, brushed DC motors. The system is programmed in C/C++ and uses flex motion functions to control the motor during testing. Motors are coupled to external encoder feedback and third party PWM drives running in closed-loop torque mode from an analog command signal. The system uses all four motion axis channels on the 7344 board to independently and asynchronously test up to four production motors at a time.
In closed-loop mode, the system runs without issue, satisfying the battery of testing protocols executed by this system. I now have a request to add additional test functionality to the system. This testing must be run in open loop mode. Specifically, I need to use my +/- 10v analog output command to my torque drive to send different DAC output levels to the connected motor.drive while monitoring response.
I do not believe the flex motion library or 7344 controller includes functions to easily switch between open and closed loop mode without sending a new drive configuration. I am also under the impression that I cannot reconfigure one (or more) servo controller axis channels without disabling the entire drive. As my system runs each axis channel in an asynchronous manner, any requirement to shutdown all drives each time I change modes is an unworkable solution.
I am open to all ideas that will allow asynchronous operation of my 4 motor testing stations. If the only solution is to add a second 7344 controller and mechanical relays to switch the drive and motor wiring between two separately configured servo channels, so be it. I just want to explore any available avenue before I place a price tag on this new system requirement.
Bob

Jochen,
Thank you for the quick response. The 7344 board does an excellent job running my manufacturing motor assemblies through a custom end-of-line tester in closed loop mode. A portion of the performance history and test result couples the motor through a mechanical load and external shaft. The shaft is in contact with a linear encoder that closes my servo loop.
My new manufacturing requirement is to also sample/document how the small DC motor behaves in open loop operation. Your solution is exactly what I need to perform the additional functional tests on the product I am manufacturing. I see no reason why this cannot work. I was originally concerned that I would need to reinitialize the 7344 board after changing axis configuration. Initialization is a global event and impacts all four channels on the 7344 board.
Using flex_config_axis() to change axis configuration on a single channel without disturbing other potentially running axis channels will solve my concern. It will be several weeks before I can return to the manufacturing facility where the 7344-based testing machine is located. I will update this thread once I verify a successful result.
Bob

Diffence between ck11n and ck40

Similar Messages

Maybe you are looking for