Diffence between Test Feed and Approved One?? "Page look"

I've created my first feed, and it tests out ok.
But, I don't get a big old blue page with my logo + description etc that the other podcasts get? Is that something you only get once you're approved within the itunes store?
Or is there a way to set that up so I can test what my page will look like beforehand?

But, I don't get a big old blue page with my logo + description etc that the other podcasts get? Is that something you only get once you're approved within the itunes store?
If you tested your feed by using Advanced->Subscribe to Podcast, no, you aren't going to get a "blue page" yet. You only get a page like that once you have submitted your feed to the iTunes Store and been approved. And no, you can't preview/test the page, but the title will be whatever you have in your <title> field, and your description will be whatever you have in the <itunes:summary> field (both in your <channel> section, not at the <item> level).
If you are still unclear on some of the finer points of iTunes podcasting, I would recommend checking out the FAQ and the Tech Spec.

Similar Messages

Drop list next to Forward and Back one page in not in current 5.0 or 4.0. Is this available some way, or do I have to go back to version 3?

In version 3.x, there was a down arrow next to the Back and Forward one page lateral arrows that displayed recent pages accessed in order. This made it easy to locate a page several steps away. Now it is necessary to go to the History menu at the top bar to accomplish the same result. Can the drop menu in the current bar be reinserted?

The drop-down marker on the Back/Forward button was removed. You can:
*right-click the Back/Forward button for the drop-down
*HOLD down left-click on the Back/Forward button for the drop-down
*Install this extension to restore the drop-down marker to the Back/Forward button:
**https://addons.mozilla.org/en-US/firefox/addon/backforward-dropmarker/
 
 
'''You need to update the following.''' The Plugin version(s) shown below was/were submitted with your question and is/are out of date. You should update to avoid known security issues with the version(s) you have installed. Click on "More system info..." to the right of your question to see what was included with your question.
*Adobe PDF Plug-In For Firefox and Netscape 8.3.0 (Very old. You may need to remove in Windows Control Panel > Add or Remove Programs)
*Shockwave Flash 10.3 r181 ('''''May be current. In Add-ons > Plugins, the current version is 10.3.181.26''''')
*Next Generation Java Plug-in 1.6.0_20 for Mozilla browsers
#'''''Check your plugin versions''''' on either of the following links':
#*http://www.mozilla.com/en-US/plugincheck/
#*https://www-trunk.stage.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#*There are plugin specific testing links available from this page:
#**http://kb.mozillazine.org/Testing_plugins
#'''Update Adobe Reader (PDF plugin):'''
#*From within your existing Adobe Reader ('''if you have it already installed'''):
#**Open the Adobe Reader program from your Programs list
#**Click Help > Check for Updates
#**Follow the prompts for updating
#**If this method works for you, skip the "Download complete installer" section below and proceed to "After the installation" below
#*Download complete installer ('''if you do NOT have Adobe Reader installed'''):
#**SAVE the installer to your hard drive (save to your Desktop so that you can find it after the download). Exit/Close Firefox. Run the installer you just downloaded.
#**Use either of the links below:
#***https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox ''(click on "Installing and updating Adobe Reader")''
#***''Also see Download link''': http://get.adobe.com/reader/otherversions/
#*After the installation, start Firefox and check your version again.
#'''Update the [[Managing the Flash plugin|Flash]] plugin''' to the latest version.
#*Download and SAVE to your Desktop so you can find the installer later
#*If you do not have the current version, click on the "Player Download Center" link on the "'''Download and information'''" or "'''Download Manual installers'''" below
#*After download is complete, exit Firefox
#*Click on the installer you just downloaded and install
#**Windows 7 and Vista: may need to right-click the installer and choose "Run as Administrator"
#*Start Firefox and check your version again or test the installation by going back to the download link below
#*'''Download and information''': http://www.adobe.com/software/flash/about/
#**Use Firefox to go to the above site to update the Firefox plugin (will also install plugin for most other browsers; except IE)
#**Use IE to go to the above site to update the IE ActiveX
#*'''Download Manual installers'''.
#**http://kb2.adobe.com/cps/191/tn_19166.html#main_ManualInstaller
#**Note separate links for:
#***Plugin for Firefox and most other browsers
#***ActiveX for IE
#'''Update the [[Java]] plugin''' to the latest version.
#*Download site: http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)
#**'''''Be sure to un-check the Yahoo Toolbar option during the install if you do not want it installed.
#*Also see "Manual Update" in this article to update from the Java Control Panel in Windows Control Panel: http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates
#* Removing old versions (if needed): http://www.java.com/en/download/faq/remove_olderversions.xml
#* Remove multiple Java Console extensions (if needed): http://kb.mozillazine.org/Firefox_:_FAQs_:_Install_Java#Multiple_Java_Console_extensions
#*Java Test: http://www.java.com/en/download/help/testvm.xml

I am trying to drag and drop one page of a .pdf into another .pdf in Acrobat Reader. I used to be able to drag and drop from one .pdf to another.

I am trying to drag and drop one page of a .pdf into another .pdf in Acrobat Reader. I used to be able to drag and drop from one .pdf to another.

If you could drag and drop pages before, it wasn't in Reader. You no doubt had Adobe Acrobat (Pro or Standard) which shouldn't be confused with Adobe Acrobat Reader. They recently added Acrobat to the name of Adobe Reader so the confusion about which product you had and/or have is understandable.

Diffences between 9i Standard and Enterprise edition

Can anyone give me the Diffences between 9i Standard and Enterprise edition. Is there any document available for this.
Thanks,
Sunil.

Here's the Oracle white paper on the subject...
http://otn.oracle.com/products/oracle9i/pdf/9idb_rel2_prod_fam.pdf
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

Can anybody explain me difference between test cases and test data

Hi All,
Can anybody explain me difference between test cases and test data.
Testing procedure for FS.
Thanks & Regards,
Smitha

Hi,
Test case is a procedure how to do the testing of particular functionality and it consists the data that to be given for testing a particular requirement of the given Functional Spec and it also consists the result whether the desired functionality is fullfilling or not.
Regards
Pratap

Diffence between sap ecc5 and ecc5(IS Retail

Dear all
what is major diffence between sap ecc5 and ecc5(IS Retail)
thanks
venkat

Hi,
ECC5 ( IS Retail) contain SAP Industry-Specific Components IS -Retail
check the release notes for both ECC5 and ECC5 IS - Retail
login into service.sap.com -> Release & Upgrade Info -> Release Notes ->SAP Industry-Specific Components ->
SAP for Retail
regards,
kaushal

Difference between copy value and use one as many

hi
what is the difference between copy value and use one as many?
thanks

[http://help.sap.com/saphelp_nw2004s/helpdata/en/26/d22366565be0449d7b3cc26b1bab10/content.htm]
[http://help.sap.com/saphelp_nw2004s/helpdata/en/ef/df564b6aa24fc9ab0d685460747de5/content.htm]
Much better understanding of UseOneAsMany: [http://help.sap.com/saphelp_nw2004s/helpdata/en/38/85b142fa26c811e10000000a1550b0/content.htm]
Edited by: Praveen Gujjeti on Feb 18, 2010 11:42 AM

Diffence between time conversion and time broadcasting

what is the diffence between time conversion and time broadcasting

Time conversions: You can update source time characteristics to target time characteristics using automatic time conversion. This function is not available for DataStore objects, since time characteristics are treated as normal data fields. The system only presents you with the time characteristics for which an automatic time conversion routine exists.
Time distribution: You can update time characteristics with time broadcasting. All the key figures that can be added are split into correspondingly smaller units of time. If the source contains a time characteristic (such as 0CALMONTH) that is not as precise as a time characteristic of the target (such as 0CALWEEK), you can combine these characteristics in the rule. The system performs time broadcasting in the transformation. Time broadcasting always applies to all key figures.

I having trouble with a scrolling page......where i have a video. the pages between the video and the previous page jumps and show a gap between the pages.....i'm not sure if it is the spped or what?

I keep getting a gap between scrolling pages of a video and a regular page. Not sure why. I keep adjusting the speed, but still I get a gap in the pages as it scrolls. Thanks.

Hello cor-el, I apologize for not letting you know if your suggestions about my question worked or not. I came down with pneumonia and then caught the flu on top of that. Today I tried what you had suggested about disabling the hardware acceleration and it didn't make any difference. You had also gave me a link to he article about plug-ins and when I clicked on the list of the current plug-ins I have the following is what came up:
Fox-it Reader Plug-In for Mozilla, 2.2.3.703
Microsoft DRM 9.0.0.3250
(drm netscape network object)
Microsoft DRM 9.0.0.3250
(drm store netscape plug in)
Shockwave Flash 12.0.0.43
Windows Media Player Plug In Dynamic Link Library 3.0.2.628
(np dsplay d11)
Windows Presentation Foundation 3.5.30729.1
When I then clicked to see if there were updates available, the only one that it said was updated was the Shockwave Flash. The Windows Media Plug In Dynamic Link Library, said the status was vulnerable and the other three said the status was unknown. Does any of this make sense to you and are there things that should be on the plug in list that aren't? I apologize for the length of my post but I wanted to give you as much information as possible. Thanks for your help

Difference between Test workbench and HP Quality center

Hello,
What is the difference between SAP test Workbench and the HP Quality center? what is the advantage and disadvantage of each tool?
Thanks in advance
Hassan

the error is in Solution Manager. I am defining the communication parameters in SOLAR_PROJECT_ADMIN / <selected project> / edit / Connection to HP Quality Center. I choose the corresponding project in Quality Center, but when I validate the screen, I get the error I mentioned before, even though the communication user exists in HPQC and is assigned to that specific project.
Thanks for your reply.
Marco

Wat is the diff. between at first and top of page

pls let me know

AT - itab 
Syntax
LOOP AT itab result ...
[AT FIRST.
 ENDAT.]
 [AT NEW comp1.
 ENDAT.
 [AT NEW comp2.
 ENDAT.
 AT END OF comp2.
 ENDAT.]
 AT END OF comp1.
 ENDAT.]
[AT LAST.
ENDAT.]
ENDLOOP.
Extras:
1. ... FIRST
2. ... |{END OF} comp
3. ... LAST
Effect
The statement block of a LOOP loop can contain control structures for control level processing. The respective control statement is AT. The statements AT and ENDAT define statement blocks that are executed at control breaks. Within these statement blocks, the statement SUM can be specified to total numeric components of a group level. In the case of output behavior result, the same applies as for LOOP AT.
So that group level processing can be executed correctly, the following rules should be noted:
After LOOP there should be no limiting condition cond specified.
The internal table must not be modified within the LOOP loop.
The work area wa specified in the LOOP statement after the INTO addition must be compatible with the line type of the table.
The content of a work area wa specified in the LOOP statement after the INTO addition must not be modified.
The prerequisite for control level processing is that the internal table is sorted in exactly the same sequence as the component of its line type - that is, first in accordance with the first component, then in accordance with the second component, and so on. The line structure and the corresponding sorting sequence gives a group structure of the content of the internal table, whose levels can be evaluated using AT statements. The AT-ENDAT control structures must be aligned one after the other, in accordance with the group structure.
The statement blocks within the AT-ENDAT control structures are listed if an appropriate control break is made in the current table line. Statements in the LOOP-ENDLOOP control structure that are not executed within an AT-ENDAT control structure are executed each time the loop is run through.
If the INTO addition is used in the LOOP statement to assign the content of the current line to a work area wa, its content is changed upon entry into the AT-ENDAT control structure as follows:
The components of the current group key will remain unchanged.
All components with a character-type, flat data type to the right of the current group key are set to character "*" at that position.
All the other components to the right of the current group key are set to their initial value.
When the AT-ENDAT control structure is exited, the content of the current table line is assigned to the entire work area wa.
Note
If the INTO addition is used in the LOOP statement, a field symbol can be specified outside of the classes after AT |{END OF}. The appropriate component of the work area wa is assigned to this field symbol.
Addition 1
... FIRST
Effect
First line of the internal table.
Addition 2
... |{END OF} comp
Effect
Beginning or end of a group of lines with the same content in the component comp1 comp2 ... and in the components to the left of comp1 comp2 .... The components comp1 comp2 ... can be specified, as described in the section Specification of Components, with the limitation that access to object attributes is not possible here.
Addition 3
... LAST
Effect
The last line of the internal table.
TOP-OF-PAGE 
Syntax
TOP-OF-PAGE [DURING LINE-SELECTION].
Addition:
... DURING LINE-SELECTION
Effect
This statement defines an event block whose event is triggered by the ABAP runtime environment during the creation of a list. This occurs when a new page is started - that is, immediately before the first line in a new page is to be output. All list outputs that take place in the event block are placed below the standard page header of the list. You cannot output more lines than are available in the page within the event block. The NEW-PAGE statement is ignored within this event block.
The entire output written to the list in the event block belongs to the page header of the current list page. The top page header cannot be moved when you scroll vertically in a list displayed on the screen.
Addition
... DURING LINE-SELECTION
Effect
If you do not use an addition, an event block is triggered for event TOP-OF-PAGE during the creation of a basic list. If you use the addition DURING LINE-SELECTION, an event block is triggered for the corresponding events during the creation of details lists. You have to use system fields like sy-lsind to distinguish between the individual details lists.
Regards,
Pavan

White screen pop-up between end jump and main splash page

hi! so i'm having a problem.. there is a white screen that pops up between the last play end jump and the main dvd splash page.. any one know how to get rid of that? there is no white frame at the tail end of my video file, i already checked for that...

Was this with a burned DVD, or at least a built Video_TS folder in DVD Player? Simulate can sometimes show visual glitches that are not really there.

Multiples galleries linked to and from one page

This is pretty basic need for photographers trying to show shoots to clients.
I have multiple shoots associated with one job for one client. Can anyone ( ahem Apple guys) put a feature into the Aperture Web Gallery workflow that will put an index page for all the different parts of one job?
G5 dual 2 Mac OS X (10.4.7) Apertue 1.1.2

Hello, Larry
Quote: "I have multiple shoots associated with one job for one client. Can anyone ( ahem Apple guys) put a feature into the Aperture Web Gallery workflow that will put an index page for all the different parts of one job?"
If I understand you correctly, you want different Index.htmls for the different shoots you did for the client? So, one index.html for one shoot which multiple photos? Another, index.html for a different shoot but the same client? But all in location in one site?
If so, Aperture rocks doing this now since version 1.
I do this using the Web Journal (and not the Web Gallery) feature in Aperture which will make different index.htmls for different days, shoots, whatever.
Here is an example:
Multiple shoots and multiple indexes but only one site.
As you can see there are 3 different index.htmls, and each with it's own set of photographs with watermarks which can be clicked on to enlarge.
You can rename each index according to your shoots, watermark them and upload them for the client to see at his or her leisure.
love & peace,
victor

Firefox will not go back and forth one page / one site using Mac Lion one finger scroll back and forth - how do I do it? Thank you.

... just upgraded to Lion from Snow Leopard. Swiping a (one) finger (left) back and (right) forth should move the pages / sites back and forward.
It does not on Firefox but does on Safari.
Please tell me how to make Firefox work.
Thank you -
Wm. Pordy

You can get the drop down list by either right-clicking on the back/forward buttons, or holding down the left button until the list appears.
If you want the drop-down arrow you can add it with the Back/forward dropmarker add-on - https://addons.mozilla.org/firefox/addon/backforward-dropmarker

Gray area between vertical ruler and edge of page – remove

I have a pages file where there is a large gray area between the edge of the page and the vertical ruler. I don't know where it came from but I want to get rid of it. I have a new file that I just opened from my templates and he does not have this large gray area.
I tried looking, clicking on things and scratching my head and nothing works.
I tried to add a couple J pigs to show what I'm talking about but can't do it. Anyway any suggestions would be highly appreciated.
TIA
David

I'm not sure what you're seeing.
Check the documents printer settings. They may be set for different printers. Perhaps Any Printer. If they'e not set for your printer, change them and see what you get.
Walt

Diffence between Test Feed and Approved One?? "Page look"

Similar Messages

Maybe you are looking for