Diffence between XI 3.0 and PI7.0

Hi
I am having one dought. what are defferences between XI 3.0 and PI 7.0 at Mapping and in IR and ID.

Hi,
1.All new features for XI 7.0 are almost same as for XI 3.0 at least till SPS 19.
Some differences are as follows:
Adapter Enhancements like JMS, JDBC, Oracle-JDBC and CIDX Enhancements
New Conversion Agent,
Receiver Determination Enhancements
Multi mapping
User defined enhancements
Unbounded Processes (Integration Processes).
2. One more difference is the ABAP stack (which is 7.0 and not 6.40) but from the developer point of view there is nothing new.
3. PI 7.0 = XI 7.0
4. For each SP in XI3.0 there is a corresponding SP being released for PI (XI 7.0). A comparison of the service packs in 2004 and 2004s:
In 2004 - In 2004s
SP12 & lower = SP04
SP13 + 14 = SP05
SP15 = SP06
SP16 = SP07
SP17 = SP08
SP18 = SP09
5. XI3.0 is based on WAS(web application server)6.40 - NW2004
PI7.0 is based on WAS(web application server)7.0 - NW2004's
There is not much difference between XI 3.0 with latest Service Pack i.e. 20 or 21 and PI 7.0
The main difference between 3.0 and 7.0 is the GUI in SLD. But, it is pretty easy to adopt. All other components, e.g. IR, ID, RWB, should virtually be identical.
7.0 also contain some SCM contents not available from 3.0. For most of us, this is a non-issue.
In 7.0 we can schedule a background job and edit the payload.
XI3.0 is based on WAS(web application server)6.40 - NW2004
PI7.0 is based on WAS(web application server)7.0 - NW2004's
Currently SP 21 for XI 3.0 and SP12 for PI 7.0 is the latest one.
ref:http://help.sap.com/saphelp_nw04/helpdata/en/cf/9844428e9cbe30e10000000a155106/frameset.htm
See This Thread on the Same Discussion
Diff between XI and PI
http adaptor on which factors we will use
differences between xi 3.0 and pi 7.0
Difference/ changes from XI 3.0 to PI 7.0
give me main advantages of XI-7.0 TO XI-3.0
XI 7.0 vs Xi 3.0
XI/PI
XI vs. PI
XI 3.0 vs. PI (XI 7.0)
Difference/ changes from XI 3.0 to PI 7.0
moving from XI 3.0 to PI 7
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/xi%2band%2bpi%2bglossary
Reward points if helpful.
Thanks,

Similar Messages

Differences between XI 3.0 and PI7.0?

Hi Experts,
I want to know the major differences between XI 3.0 and PI7.0?
can anyone suggest me some weblogs which explains the all the new features of PI7.0.....as i'm very much keen to learn PI7.0
Thanks
Faisal............

Hi,
There is no different between XI3.0 and PI 7.0 but there is a lot difference in XI3.0/PI 7.0 and PI 7.1.
Refer the below thread for Xi and PI difference:
PI 7.0 and XI 3.0
there are many threads with sme topics
New highlights for SAP NetWeaver Process Integration 7.1 are:
Enterprise Services Repository as a central storage location for enterprise service definitions and lifecycle management data for all enterprise services
Universal Description, Discovery, and Integration (UDDI) 3.0compliant services registry for runtime management of enterprise services
Improved support for standards such as Web Service Reliable Messaging (WS-RM), WS Policy, Security Assertion Markup Language (SAML)
Extended support for high volume scenarios
Business Activity Monitoring for process definition of milestone monitoring (event correlation)
Improved SAP NetWeaver Administrator support for central configuration and administration of both mediated and point-to-point scenarios.
XML payload validation
Process editor modeling enhancements: step groups, integrated alert management, configurable parameters
Integration of human interaction (generic user decision)
WS-BPEL 2.0 preview.
Message Packing.
Local Processing in Adapter Engine.
Reusable UDFs.
Lookup function with multiple results.
Refer the below link form where the most of the above information has been taken:
1) Capability and Enhancements of SAP NetWeaver Process Integration 7.1:
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/community/capabilityandEnhancementsofSAPNetWeaverProcessIntegration7.1&
2) New SAP NetWeaver Process Integration:
/people/udo.paltzer/blog/2007/04/26/new-sap-netweaver-process-integration-release-planned-for-2007
3) Enhancement in PI 7.1:
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/07/27/briefdescriptionaboutEnhancementinPI7.1&focusedCommentId=40564
4) SAP NetWeaver Process Integration 7.1 - Overview of New Capabilities:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/706005a3-3bd6-2910-91ae-a2016239bdcf
5) SAP NetWeaver PI 7.1
/people/daniel.bianchin/blog/2007/12/19/all-you-wanted-to-know-about-sap-netweaver-pi-71-and-more
This section has all the relevant links for each topics:
Enterprise Services Repository:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4073b4c4-7137-2a10-a5a9-abb618b7a5e7
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0301486-758c-2a10-9d84-a195556df422
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/903a4127-5403-2a10-0a96-e9452c3ab1de
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c0f90f22-678c-2a10-91a0-f1f1bf7ff191
Usability Features in SAP NetWeaver PI 7.1 Development and Configuration Times
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a0e7734f-e969-2a10-24b6-df58a710941c
Advance adapter engine:
/people/william.li/blog/2008/01/10/advanced-adapter-engine-configuration-in-pi-71
/people/william.li/blog/2008/02/07/display-adapter-synchronous-message-content-in-rwb-of-pi-71
Preview on New Features of the Integration Directory in SAP NetWeaver Process Integration 7.1
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10c0de4b-7876-2a10-e286-8412668643a8
Usability Features in SAP NetWeaver PI 7.1 Development and Configuration Times:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a0e7734f-e969-2a10-24b6-df58a710941c
SAP Network Blog: Share User-Defined Functions in Message Mappings of PI 7.1
/people/william.li/blog/2008/01/02/sap-pi-71-mapping-enhancements-series-share-user-defined-functions
Preview on New Features of the Integration Directory in SAP NetWeaver Process Integration 7.1
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10c0de4b-7876-2a10-e286-8412668643a8
SAP Network Blog: Mapping Enhancements in SAP NetWeaver Process Integration (PI) 7.1
/people/jin.shin/blog/2008/01/11/sap-pi-71-mapping-enhancements-series-mapping-enhancements-demo
New Business Process Engine Features in SAP NetWeaver Process Integration
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0068bc1-6f8c-2a10-52bb-c6ee3562feb2
Folders for more flexible and organized way of development.
/people/william.li/blog/2007/08/07/using-folders-in-pi-71 -- Folders in PI 7.1
High Volume support in PI 7.1
/people/holger.faulhaber/blog/2007/12/12/high-volume-support-in-pi-71
Upgrade to SAP NetWeaver PI 7.1
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8085e299-718c-2a10-de94-928f62b763ce

Diffence between documents into BSEG and BSET

Morning all,
I'm working on table BSET : Tax Data Document Segment.
So i notice only documents type RE are into this tables.
Someone could yu give any explanations.
Why others tax documents are not into BSET ?
Regards,
Black Rabbit...
Always do what depends on me.

Hi
That's ok because that trx posts a document for account G/L only
U should check documents for Vendor and Customer
Can you enter a tax code there?
Max

What is the difference between SAP NW PI7.1 and PI7.1 EHP1

We have a customer using SAP PI7.1 EHP1. The application to be deployed
isdeveloped on SAP Netweaver PI 7.1 SP06.
We need to know if application developed and transported from PI7.1 is
compatible with EHP1?
Below are the Components used by the application .
1) SSL communication using SOAP adapter
2) Java mapping , Graphical mapping , XSLT mapping
3) Customised EJB modules
4) Adapter framework
5) ALE layer for IDoc communication from ERP to PI
6) RFC lookups to PI system and ERP system.
Questions
1)Will PI EHP1 be able to communicate with PI7.1 using SOAP adapter ?
2) What is the difference between SAP NW PI7.1 and PI7.1 EHP1 ?
Regards,
Sneha

Hi,
EHP Pi7.1 new
IPv6 Support in SAP Systems (new)
Async/Sync and Sync/Async Bridge in the JMS Adapter (New)
High Availability (New) Locate the document in its SAP Library structure
Use
A new concept is available for setting up a high availability environment for SAP NetWeaver Process Integration (PI). To do this, you need SAP Web Dispatcher for load balancing, and you must reconfigure your HTTP, RFC, and RMI connections so that they can be used for load balancing. You must also make various configuration steps in other components of your PI environment.
[Level 4: Document: XML to Text Conversion Module (New)] XML to Text Conversion Module (New)
Message Packaging (New)
Monitoring Milestones (New) Locate the document in its SAP Library structure
Use
You can use the new scenario variant Monitoring Milestones of the Business Process Management scenario to define a monitoring process that can monitor events from different applications. A monitoring process can subscribe to events from SAP or non-SAP systems.
check given Link
http://help.sap.com/saphelp_nwpi711/helpdata/en/61/8c3842bb58f83ae10000000a1550b0/frameset.htm
Regards,
Amit

What are the major differecese between PI7.0 and PI7.1

It's said that there are 3 major differences between PI7.0 and PI7.1.
Could you give them here because I cannot find them.
Thanks!

Hey,
Some more info,
Process Automation Enterprise Services Repository as a central storage location for enterprise service definitions and lifecycle management data for all enterprise services
Enhanced Design Capabilities
Service Enabling & Services Registry u2013UDDI V3.0 Additional compliant services registry for runtime management of enterprise services
Web Service Standards,Web Service Reliable Messaging, Web Service Policy & Security
High Volume Support & Local processing in Adapter Engine ,Message packaging
Improved performance for ccBPM /BPM
using the Advanced Adapter Engine (AAE) in SAP NetWeaver PI 7.1, much higher numbers of messages can be reached.Even better results can be achieved for asynchronous scenarios
PI 7.10 are the services based on service interfaces. These services can be configured with the help of the SOA Manager
Cheers
Agasthuri

Diffences between 9i Standard and Enterprise edition

Can anyone give me the Diffences between 9i Standard and Enterprise edition. Is there any document available for this.
Thanks,
Sunil.

Here's the Oracle white paper on the subject...
http://otn.oracle.com/products/oracle9i/pdf/9idb_rel2_prod_fam.pdf
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

Diffence between sap ecc5 and ecc5(IS Retail

Dear all
what is major diffence between sap ecc5 and ecc5(IS Retail)
thanks
venkat

Hi,
ECC5 ( IS Retail) contain SAP Industry-Specific Components IS -Retail
check the release notes for both ECC5 and ECC5 IS - Retail
login into service.sap.com -> Release & Upgrade Info -> Release Notes ->SAP Industry-Specific Components ->
SAP for Retail
regards,
kaushal

Difference between xi3.0 and pi7.0

hey,
can anyone post me the difference between xi3.0 and pi7.0.
Moreover any extra configuration is required for that.
Because we need to setup xi box in client place.
please explain me in detail.
Thank u.

HI Raju,
Go throgh the following links
Differnce between XI3.0, PI 7.0 and PI7.1
Re: XI-3.0 Vs PI-7.0 Vs PI-7.1
XI 3.0 Vs PI 7.0
Regards
Sridhar Goli

Difference Between PI7.0 and PI7.1

Hi
Any one give me Differences between PI7.0 and PI7.1.
What are the major features Included in PI7.1
Thanks

Hey,
In specific there are lotz of new features adn goodies to be bundled with PI 7.1 scheduled for september release.
Levarage will be on SOA, performance enhancements, and addressing current problem that many of us face thatz high-volume message processing. is supported by message packaging.
Untill now we are only dealing with Integration Repository. PI 7.1 introduces Two components the concept of Enterprise Services Registry, Enterprise services Repository.
ES- Repository is based on Integration Repository but remember concept of messgae interfaces will be replaced by Service Interfaces.
SAP NW PI 7.1 the Enterprise Services Repository will offer multiple operations per service.
Significant enhancements in CCBPM like Driving WS-BPEL 2.0 standard,User Decisions,Extended conditions and expressions,BPEL4WS 1.1 standard adoption.
Additional Functions provided for mapping most imp one Synchronous DB/RFC look-ups.
Additional support for standards.
Even quite a few changes in Integration Directory:
XML PAYLOAD VALIDATION in Sender Agreement Validate incoming/outgoing .messages against XML schema.
As other have suggested https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/706005a3-3bd6-2910-91ae-a2016239bdcf wil give you a good insight to PI 7.1.
<b>
Cheers,
*RAJ*
*REWARD POINTS IF FOUND USEFULL*</b>

Diffence between physical layer and BMM layer

Hi all,
Please let me know the difference between Physical layer design and BMM layer design. Please write your views in your reply instead of links.
regards
chandra kanth.

chandra kanth.,
Use in the layers
The physical layer is the layer of the Logical Business Model where you define the physical data model of your data source. It contains information about the physical data sources.
The most common way to create the schema in the Physical layer is by importing metadata (table, view, …) from databases and other data sources. If you import metadata, many of the properties are configured automatically based on the information gathered during the import process. You can also define other attributes of the physical data source, such as join relationships, that might not exist in the data source metadata.
In the Business Model
In the business model, OBI recommends using complex logical joins instead of foreign key logical joins.
When Complex joins are used in the business layer then they are really acting as placeholders. They allow the OBI Server to decide on which are the best joins define in the Physical Layer to satisfy the request.
In a Dimension, you may have multiple Logical Table sources that all join to one fact table. The OBI Server will then decide the best joins to use to meet the requirements.

Differences between xi 3.0 and pi 7.0

Hi friends,
Can anybody please post the differences between XI 3.0 and PI 7.0?
Thanks in advance.

Lou,
From functional point, there is no difference between XI3.0 and PI7.0. There are changes only wrt SP. For every SP release on PI7.0 a corresponding SP for XI3.0 is also released.
A comparision of the service packs in 2004 and 2004s;
in 2004 - in 2004s
SP12 & < - SP04
SP13 + 14 - SP05
SP15 - SP06
SP16 - SP07
SP17 - SP08
SP18 - SP09
For release notes ref:http://help.sap.com/saphelp_nw04/helpdata/en/cf/9844428e9cbe30e10000000a155106/frameset.htm
There is no f'nal difference between XI 3.0 and PI 7.0. In order to bring all netweaver releases on par with each other , SAP released / renamed XI as PI and it is a part of NW04s
For every release of PI 7.0, there is a parallel Support Pack on XI.
Go through this thread which will help you:
PI 7.0 Information
Process Integration (PI) & SOA Middleware
---Satish

Difference between XI 3.0 and PI 7.0

Hi,
What is difference between XI 3.0 and PI 7.0
Is this way we check version:
System-- Staus -- Component Information --
PI_BASIS -- 2005_1_700
So the above system is PI 7.0 -- right?
Regards

Hi Rick,
PI 7.0 works on WEBDYNPRO....They are basically the same technically but when SAP launched Netweaver 2004s , to bring all objects of Netweaver 2004s in Synch with the WAS version, XI was renamed to Process Integration (PI 7.0) .
A comparison of the service packs in 2004 and 2004s;
in 2004 - in 2004s
SP12 & < - SP04
SP13 + 14 - SP05
SP15 - SP06
SP16 - SP07
SP17 - SP08
SP18 - SP09
XI3.0 is based on WAS(web application server)6.40 - NW2004
PI7.0 is based on WAS(web application server)7.0 - NW2004's
http://help.sap.com/saphelp_nw2004s/helpdata/en/d6/369142f195675ee10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/fb4cd3207c7063e10000000a1553f6/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f36ce30f-0e01-0010-a89b-c158d07c44ff
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ec19c05d-0501-0010-09a2-b6db51b5318d
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5441afe5-0601-0010-dba5-dc5f9d5caa9d
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c50cddbb-0601-0010-92a7-f2a40ca68e6d
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f027dde5-e16e-2910-97a4-f231046429f2
Refer these threads as well:
PI 7.0 and XI 3.0
http adaptor on which factors we will use
Diff between XI and PI
Diff between XI and PI
http adaptor on which factors we will use
differences between xi 3.0 and pi 7.0
Difference/ changes from XI 3.0 to PI 7.0
give me main advantages of XI-7.0 TO XI-3.0
XI 7.0 vs Xi 3.0
XI/PI
XI vs. PI
XI 3.0 vs. PI (XI 7.0)
Difference/ changes from XI 3.0 to PI 7.0
moving from XI 3.0 to PI 7
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/xi%2band%2bpi%2bglossary
Regards,
Vinod.

Difference between XI 3.0 and XI 7.0

What is the Difference between XI 3.0 and XI 7.0?
( functionality & architecture wise)

Hi,
There is no new features added in PI7.0, if u have working on XI 3.0, PI7.0 Older versions the features same..
But PI7.1 there is new changes u can find below.....
Integarte SAP & Non-SAP Legacy system
PI 7.1 is based on open, web service enabled standards and
Integrate all SAP and non-SAP, A2A, B2B, BPM, service enabling and BAM
Highlight of enhancement in PI7.1
1) Enterprise Service repository (ESR) contains the design Registry
2) Includes significant high-volume message processing is supported by message processed in a single
Service call
3) Also importantly support for asynchronous messaging based Reliable Messaging (WS-RM) for both
Brokered communication between two systems will be supported in this release.
4) Provide Service Registry benefits based on UDDI 3.0
Enterprise Service Repository
In PI7.1 ES Repository is at the heart of Enterprise SOA
ES Repository is really the master data repository of service objects for Enterprise SOA
It contains the definition & process of services
In ES Repository has two parts, one is the ES Repository and the other being the Services Registry
ES Repository (ESR) is really the master data repository of service objects for Enterprise SOA
Besides service definition the ES Repository also provides you with a central point for finding and
Managing service metadata from different sources, including application deployments - this is
Where the Services Registry comes in. The Services Registry is the UDDI part of the ESR which
Enables service consumers to find services
The SAP XI Integration Repository used by process integration has become the basis of the central Enterprise Service Repository: powering Enterprise SOA and Service Enablement.
Objects in the ES Repository include:
Global Data Types (CCTS based)
Process Component Models
Executable Integration Processes (BPEL)
Integration Scenarios
Service Interfaces (Enterprise Services)
Interface Mappings
Enterprise Services built in the ES Repository
Enterprise Services includes:
Are built using a consistent enterprise model based on: GDTs, Process Components, and Business Objects.
Are based on open standards.
Are mapped to the Service Interface object in the ES Repository.
Global Data Types - Building blocks for Service Interfaces
Defined in the ES Repository
Defined company-wide based on open standards (ISO 15000-5, UN/CEFACT CCTS)
Reusable semantic building blocks for service interfaces and message types
Process Component Models
Drill down from high-level models to service interfaces and operations
Process component architecture models enable SOA governance
Process components expose on enterprise services, which are based on service operations
Web Services Reliable Messaging (WS-RM)
Asynchronous messaging (EO, EOIO) based on open WS standard
Support Business Activity Monitoring (BAM)
Embedded Event Infrastructure: Collecting, pre-filtering and publication of events across SAP and non-SAP systems.
Event handling: cast the local event to an event proxy to send out event messages to event Consumers.
Transaction SWF_BAM for event filtering via filter rules and event handling.
Enhancement for Mapping
Re-usable user defined functions.
Look-up function reads multiple fields.
Synchronous DB RFC lookups: Use graphical function to model look-ups.
Specify mapping parameters at configuration time.
Principle Propagation based on SAML
This feature uses the WS-RM protocol.
The implementation of this feature is based on the open standard SAML and can
be used with backend systems that support the SAML technology.
Forward user context from sender to receiver.
Authorization check in receiving system based on original user.
Support BAM Milestone Modeling (BPEL)
Sub-Process Calls: Integration Process Call,
User Interaction: User Decisions (initially not part of this project, but will be covered as well to draw the complete picture),
Alert Categories
Enhancements for Process Automation
Human interaction:
Integration paradigm (design/ configuration).
Generic user decision.
Language dependent texts for end-user display, enriched with variables.
WS-BPEL 2.0 adoption: Preview and implementation BPEL4People, BPEL-SPE Simple user defined functions can be configured directly in the process.
reward points if helpful...
PrasHanT

Difference betwwen PI7.0 and PI7.1

Hi PI experts,
I am interested to know the major advantages in PI7.1 over PI7.0.
please do let me know.
thanks in advance.
Bhoj

Hi,
PI 7.1 will be in rampup then - not global availibility
when it will be available you will get an upgreade guide as always
Currently PI 7.0 is only available for real time implementation. You could have the version of PI 7.1 from SDN, but that not for the real time implementation. Its limited only for individual usage.
There is huge difference between PI 7.0 and PI 7.1.
1. PI 7.0 is the part of Netweaver 2004s and PI 7.1 is key entity in eSOA.
2. PI 7.1 have various mapping Enhancements as well as reusability of UDFs across the mappings etc. which is not available in PI 7.0
/people/william.li/blog/2008/01/02/sap-pi-71-mapping-enhancements-series-share-user-defined-functions
3. PI 7.1 comes with the concept of folders for more flexibale and Organized way of developements.
/people/william.li/blog/2007/08/07/using-folders-in-pi-71 -- Folders in PI 7.1
4. Advanced adapter engine is used in PI 7.1, which have overcome the various communication related limitations of previous versions
Refer
Upgrade to SAP NetWeaver Process Integration 7.1
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8085e299-718c-2a10-de94-928f62b763ce
High Volume support in PI 7.1
/people/holger.faulhaber/blog/2007/12/12/high-volume-support-in-pi-71
Usability Features in SAP NetWeaver PI 7.1 Development and Configuration Times
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a0e7734f-e969-2a10-24b6-df58a710941c
Enterprise Services Repository: Importance in Enterprise SOA Architecture
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4073b4c4-7137-2a10-a5a9-abb618b7a5e7
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0301486-758c-2a10-9d84-a195556df422
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/903a4127-5403-2a10-0a96-e9452c3ab1de
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c0f90f22-678c-2a10-91a0-f1f1bf7ff191
Features of PI 7.1
/people/udo.paltzer/blog/2007/04/26/new-sap-netweaver-process-integration-release-planned-for-2007
Advance adapter engine:
/people/william.li/blog/2008/02/07/display-adapter-synchronous-message-content-in-rwb-of-pi-71
/people/william.li/blog/2008/02/07/display-adapter-synchronous-message-content-in-rwb-of-pi-71
Plesae go through below links to know the advaced features of PI 7.1
SAP NetWeaver Process Integration 7.1 - Overview of New Capabilities
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/706005a3-3bd6-2910-91ae-a2016239bdcf
Usability Features in SAP NetWeaver PI 7.1 Development and Configuration Times
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a0e7734f-e969-2a10-24b6-df58a710941c
SAP Network Blog: Share User-Defined Functions in Message Mappings of PI 7.1
/people/william.li/blog/2008/01/02/sap-pi-71-mapping-enhancements-series-share-user-defined-functions
Thanks
Swarup

Possible to segment traffic between 2 interfaces? And other questions...

I would like to set my G5 up as a server utilizing a second connection and to keep traffic seperated between this server connection and my regular internet connection (would be wireless). I'm pretty sure this alone is fairly straightforward and can be accomplished by setting up the new interface and moving it down to the bottom of the connection list with wireless at the top. That should keep all non-specific traffic from flowing out the ethernet/server connection - I think.
If the above works the way I stated then I would also want to firewall ONLY the ethernet/server connection (the wireless has it's own hardware firewall). AND - this is the tricky part - I also want to add a fake interface that has a fake IP and bind that to the "real" ethernet/server connection. The reason for that is because I need a static IP to bind the service to. I know if the connection list thing works to flow the traffic that if I had an external router on the server connection, this wouldn't be needed. I'd already have a fake IP to bind to and I wouldn't have to run the firewall on the Mac. But I don't and I'd rather not have to buy one.
So can this be done through the network/sharing preferance panes? If so, are there any "gotchas" I should be aware of? If not, is there any software tool out there that would make setting this up easier/faster? I'm not opposed to doing it all via command line, but I'm a bit rusty with my linux/unix admin knowledge. Plus I'm not 100% certain how to set all that up command line wise without screwing up OS X!
Thanks.

I'm not sure I fully understand what you are attempting to accomplish. Lets see if I have the general idea.
You have a single G5, that you want to use as both your desktop machine and also to provided specific services, such as web, email, etc.
You have some type of hardware firewall/security appliance.
You have some type of wireless access point.
You don't seem to have any type of router or switch in your configuration.
You want all of your server based traffic to be sent and received on it's own Ethernet port. You want your personal Internet traffic to be sent and received on your wireless connection.
So my questions are:
Where is the server traffic going to, coming from? Who is accessing the server, is it users on the Internet, or just computers on your own LAN (which you didn't mention).
If your server is to allow data from or send to the Internet, then you need to have a way to route the traffic there. Do you have more then one method to access the Internet, or will all traffic, both personal and server being going though the same Internet access pipe?
If it is all going through the same pipe, and you only have the single computer, I don't understand why you wish to segment the traffic.
If on the other hand you have multiple computers on your LAN. then segmenting traffic may make sense. This would allow access to your server and keep your LAN well secure.
Anyway, to get to specifics, you'll need to use the terminal app to bind specific services to specific IP's and ports on your Mac. You will also need to manually configure the firewall to be able to select specific connection ports and bindings. However, while I think it can be done, I'm not sure it makes a great deal of sense.
I would be more inclined to suggest a router or switch that can provide VLAN support, or a router that provides true DMZ support, would be a good way to go.
Anyway, a little more info would be helpful.
Oh and if I have this totally worng in what I think your doing.. My mistake.
Tom N.

Diffence between XI 3.0 and PI7.0

Similar Messages

Maybe you are looking for