Difference "abc indicator" in MRP1 & "cc phys inv ind" in plant data stor1
Hello,
we want to do cycle counts and I noticed that there are two different field in the material master for that.
I think they have a different purpose?
"ABC indicator" field in MRP1 view
and
"cc phys inv ind" field in plant data/ stor 1 view
Can somebody please explain the difference?
Thanks
Anne
MC40 and MC41 dont need customizing, setting can be made in selection screen.
ABC analysis for cycle count MIBC needs customizing.
In MRP1 view the field name is MARC-MAABC while on storage location view the field name is MARC-ABCIN.
The one on storage location view is used for cycle count, and includes ABC and D, and is caclulated by MIBC transaction.
The indicator in MRP1 view is calculated and updated by MC40 and MC41 transaction
MICN is the only one that can update the indicator used for cycle counting.
if you execute both transaction with same settings, then there should be the same result.
However, pretty often the cycle count indicators are precalculated by MICN based on consumption, but then individual items are changed to get a different indicator for specific reasons.
You may have a low value item, which is very important for your processes.
Based on consumption values it may get indicator C, but if you have differences on that item then it is a critical factor for your business, hence you want count it more often, thus you would manually change it to B or even A. (which can be done directly from the MICN report)
The focus on both indicators can be equal in many companies, but may also be different in other companies, hence you need 2 indicators for ABC analysis
Similar Messages
-
Hi,
In our organization if material consumption is more than 1000Qty it will be considered as A category and if it is between 500 to 1000 then B category and less than 500 is C category. Where we can define this in SAP.
Thanks and Regards
PavanHi,
ABC indicator can be maintained in MRP View in material master
Difference "abc indicator" in MRP1 & "cc phys inv ind" in plant data stor1
pherasath -
BDC- To add ABC indicator in MM02-- MRP1
Hi,
I am working on BDC- To add ABC indicator in MM02--> MRP1.
Problem -->
In some material+ plant - Reorder point is there. In this case I need to take additional 'BDC_okcode' for ENTER.
HOW CAN I DO THIS?
I tried it with 'Select statement' between the Perform statement, but it's not working?
IF wa_file-matnr IS NOT INITIAL.
PERFORM bdc_dynpro USING 'SAPLMGMM' '0060'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RMMG1-MATNR'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
PERFORM bdc_field USING 'RMMG1-MATNR'
wa_file-matnr.
PERFORM bdc_dynpro USING 'SAPLMGMM' '0070'.
PERFORM bdc_field USING 'BDC_CURSOR'
'MSICHTAUSW-DYTXT(11)'.
PERFORM bdc_field USING 'MSICHTAUSW-KZSEL(11)'
'X'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
PERFORM bdc_dynpro USING 'SAPLMGMM' '0080'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RMMG1-WERKS'.
PERFORM bdc_field USING 'RMMG1-WERKS'
wa_file-werks.
PERFORM bdc_dynpro USING 'SAPLMGMM' '4000'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=BU'.
PERFORM bdc_field USING 'MARC-MAABC'
wa_file-maabc.
SELECT SINGLE minbe INTO v_minbe FROM marc
WHERE matnr = wa_file-matnr
AND werks = wa_file-werks.
IF v_minbe GT 0.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
ENDIF.
ENDIF.
CALL TRANSACTION 'MM02' USING it_bdcdata MODE p_mode MESSAGES INTO it_msg.Hi,
Try to use Bapi and see ..Please find the sample code.
LOOP AT t_itab INTO wa_itab.
CALL FUNCTION 'CONVERSION_EXIT_MATN1_INPUT'
EXPORTING
input = wa_itab-matnr
IMPORTING
output = wa_headdata-material
EXCEPTIONS
length_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
prepare the follwing structres ( plantdata,headdata, plantdatax) .
* Select the MRP view
wa_headdata-mrp_view = 'X'.
* Call the Bapi to create the MRP view.
CALL FUNCTION 'BAPI_MATERIAL_SAVEDATA'
EXPORTING
headdata = wa_headdata
plantdata = wa_plantdata
plantdatax = wa_plantdatax
TABLES
returnmessages = t_return.
ENDLOOP
Regards,
Nagaraj -
Mandatory check for ABC Indicator- MRP1 view
Dear All,
I want to make ABC Indicator mandatory for ROH material type and to the particular plant. How can I achieve this?
I tried to change in customization (Change 'Field selection for data screens' ), but its effecting other fields also. because in the field selection group 51 has so many other fields.
Should I have to create new field section group & field reference Or any other way? Need your valuable guidance.
Thanks.hi Vijay,
if you want to control it thru configuration then you have to create a new field selection group and then you can make the ABC indicator mandatory.
you can also use the user exit in material master which will throw an error message at the time of saving of material master if the ABC indicator field is blank.
Regards,
Anoop singh -
Can not change the ABC indicator in Material master MRP1 View?
Hi All,
I could not change the ABC indicator in Material master for material X. Could some one please specify the condition or prerquisit for making chnages in ABC indicator?Hi Animesh,
In Logistics Information system , ABC analysis can being done and results updated in Material master for ABC indicator by background job run.
The relevant transaction is MC40 ( Total Analysis) .
This transaction when run in backgroung with field "Update ABC Ind.in background processing mode" clicked, will update the ABC indicator appropriately.
You can find different criteria based on which A, B,C is decided.
I hope this will be useful to you.
Please check and confirm.
Regards
Datta -
Updation of ABC indicator in Material Master
Hi,
For ABC analysis, I carried out it according to T_code MC40(Usage value). I got the category of material. For eg "A".But how the ABC indicator updates in Material master.Because I couldnt get indicator in MRP1 view.
Whats the right way? Pls guide me.
Thanks,
Goraksh.Hi,
Update of consumption is based on movement type, and you can decide which movement types should have or have not consumption updating.
Check in transaction OMJJ if the movement types in question have indicator "Consumption posting" (field V_156_VC-KZVBU) as marked.
If it is the case, consumption is updated, opposite for un-ticked.
Hope that helps.
Thanks. -
ABC indicator in Material Master
Hi experts,
Could you please let me know if the ABC indicator field used in MRP1 view is Plant dependant or Plant independant?
We have 2 plants. So should we set this ABC indicator seperately for Plant 1 & Plant 2?
Thanks,
PriABC INDICATOR:
Indicator that classifies a material as an A, B, or C part according to
its consumption value. This classification process is known as the ABC
analysis.
The three indicators have the following meanings:
o A - important part, high consumption value
o B - less important part, medium consumption value
o C - relatively unimportant part, low consumption value
So we can say that this information in Material master is plant specific (Plant dependent)
Logically if we think the material which is of high importance and have high consumption in one plant need not have to be important with same level of consumption in another plant.
Rerward if it is helpful
Regards
Pavan
So when doing the bifercation of the materials based on their importance it is plant which is of utmost importance -
Where a system saved a old ABC indicator
Dear expert Hi
We are working in our company with ABC indicator for cycle counting , Trans: MIBC
I will need to create a new Query when we can see what is the old ABC indicator and what is the new ABC indicator after we update a indicator with MIBC
Please you can explain where a system saved old ABC indicator (TABLE)?
Regards
DianaHi,
For a material master the ABC indicator is mentioned in the MM01 -MRP1 view screen
The table name is : MARC
where as in MBIC t.code if you change the CC indicator the CCindicator changes is indicated inthe same t.code in X. it is not stored in Table. It is stored in a structure.
actually the ABC indicator is stored in table MARC only
Regards
G.Ganesh Kumar -
ABC Indicator Update Using MIBC (RMCBIN00)
Hi,
I need a help investigating what's going on with MIBC update.
Here is what happened.
We run MIBC yearly to reset the ABC indicator based on consumption in material master (MARC-ABCIN).
I ran MIBC with 'Display' option first and download the result and then ran it with the 'Update' option to make actual change.
However when I checked the actual ABC indicator updates (in material master change log) it is updated differently than the downloaded result I've got from the 'Display' option run.
For example, for material X the new ABC indicator says 'C' (checked a change log in the master) but when I checked the same material from the download
it says the new indicator is 'B'.
I don't know why this happened.
Any input on this matter is appreciated.
Regards,
EddieHow long was the time difference between the first (display) and the second (update) run?
If you had implemented OSS note 1676031 - MIBC: No option for processing with update and list
then you could have a list from the update run and could directly compare the values of both lists.
Are you certain the execution was made with the same selection parameter?
If yes, then the underlying values must have been changed in the meantime, eventually a backposting done. Or correction made to the consumption values (material master table MVER).
Even a change on a material B can cause a change in the CC indicator for material A, the logic how the indicator is calculated can be found with an example behind the blue info button in MICN. -
Customize ABC Indicator (MAABC)?
Hello,
Is it possible to change the existing values in the field MAABC (ABC Indicator) in Material Master (screen MRP1). Or enter additional entries?
Thanks in advanceHi Kristin,
I'd tested in ECC 6.0, now I have verified this issue in 46C, and unfortunately, after more checks on this issue I have to say, that there is no way in SAP standard system to include additional values (e.g.:D) for MARC-MAABC in your release (there is no "check table" for the field MARC-MAABC in SE11 and hence it's not configurable).
Kindly note that as this is a standard R/3 Domain, it does not allow any changes to be made to it. As a workaround You could consider creating a copy of this domain and may be add additional values to the value range. However this would
clearly be a modification to the standard SAP system and will not be supported by SAP. (check carefully it)
Regards,
Mauro -
MI31 - Phy Inv. - how to exclude Variant Config Materials
For our Variant Cofiguration Materials (parent materials) we don't have stock to count for the physical inventory (MI31). The company would like to exclude these items from the material selection automatically.
I've looked around in the IMG for material master and in physical inventory but I didn't find anything that looked like a "exclude from Phys Inv." indicator or anything that could be used on one of these materials.
The site could "exclude" the individual material #'s in the selection screen of the MI31 transaction and save a variant or something...but it would have to always be monitored when new materials were created, etc. Company would like to know if there is a configuration setting of some kind that can exclude a Variant Material from the phys inventory run.
Any ideas would be appreciated.
Thanks,
Jasonwhat is wrong with ACC TO STOCK settings?
Does it exclude to much? more than you expect?
Unfortunatly you have not done anything in your design to distinguish Variant Config Materials from standard materials.
Same material type mean probably the same number range as well.
I have other ways to select, but it depends on the number of materials that are in this material type.
How many do you have in that material type, how many do you want to exclude.
How often will you count? -
System must show msg - Due to phys. inv., material is blocked for movement
Hi,
We want that when do anything (create PO, create BOM, material movements etc) on XXXXX material, system must show the message - Due to phys. inv., material is blocked for movements.
If we mark X in Phys. Inv. Block indicator in material master under Store location stock, then this msg must be shown, but not happening this.
How can we do it.
Regards.Hi,
Maintain the blocking indicator in the purchasing view of material master - Plant-sp.matl status.
Based on the block configuration you will get warning/error message.
The Physical inventory block indicator in Storage location stock view is set automatically when you create a physical inventory document with posting block.
But this block will only restrict material movements for this material. PO/BOM creation will be allowed.
Hope its clear.
Thanks & Regards, -
Vendor report for ABC indicator field
Hi All,
My client uses field ABC indicator in the purchasing data view of the vendor master. They want to have reports based on this field.
Are there any standard reports in SAP which can give total purchased value and quantity for a vendor with specific value of ABC indicator?
Regards,
VishalHi Vishal
you can try with T code ME81N
link:[http://help.sap.com/saphelp_45b/helpdata/en/75/ee128c55c811d189900000e8322d00/frameset.htm]
Hope this helps
Regards
Vikrant -
Hi
Having some clarification cycle count indicator...
1) How to mass remove the ABC indicator set for the material master ?
ie, mass change from a indicator specified to blank field.
I believe this is kind of basic qsnts, really appreciated your support.
Thanks
MMHi,
Just tested this out in my system and it works. Here's what I did.
1) Execute MM17
2) Choose Fields Tab --> Search for MARC-ABCIN and then highlight and execute
3) Enter Material and Plant then execute
4) At the new values line, leave it blank then, click on carry out mass change button
5) Save
Even with CC Fixed indicator checked, I am still able to change the value to blank.
Hope this helps
Regards,
Nazrin -
Hi PM gurus
I have a problem. I change a ABC Indicator value of Functional Locations to A via transaction IL02. However, when i get a report with transaction IW38, I dont see A value in ABC Indicator field in some of the Functional Locations. I am sure I have changed and saved the value of that field. What may be the reason? Do you have any idea? Thanks in advancecheck the change history, maybe someone else has changed it again.
Maybe you are looking for
-
How to Install 9i real application clusters on a PC!
How to install and deploy Oracle Real Application Clusters on a single Linux server with a minimal configuration (less than $1000 worth of harware): First of all to install Oracle cluster database you DON'T HAVE to have a cluster, but a single PC may
-
Flash Builder 4.5 crash on load OS X 10.7
It was working, the app crashed during a build then would not reload. After a short bit of time it returns an error alert with instructions to look at the log file. Looking at the .log file and the console there are several Java errors (see bellow) T
-
Multi-language support for Contacts
I live in Beijing and store addresses for my Contacts in English and Chinese. Prior to IOS 7, I was able to display these address on my iPhone in both languages. The addresses still appear in English and Chinese on my MBP and in iCloud. However, I on
-
Hi Experts, I have a requirement where I have to build a query for some BW querys i.e. I have to generate a Report Access History Log for define BW PP Reports. Following information required in the Log Report: 1) How often are these reports accessed
-
.xml get disformatted after adding a new Element
Dear friends! I have a xml file when i add a new element to this its formatting get destroyrd. Plz help me to keep them in proper shape. before adding: <person> <name>xyz</name> </person> after adding a new name element: <person><name>xyz</name> <nam