Difference B/W Delivery plant and item plant in Sales Order

HI,
May i know Difference between Delivery plant and item plant in Sales order and what is the use of those fields.What is the process of raising sales order for different plants.
Thnks&Rgds
NAG
Edited by: NAGA SUDHIR on Apr 3, 2009 6:10 AM

HI G. Lakshmipathi,
Thnks for the reply.Yes i am comparing (DWERK (at header level) and WERKS (at item level)) these two fields.
Any how we can give only one plant in Customer Master, we are not maintaining Customer/mtrl regard (Not required in our company scenario) and we have extended MMR to different plants.
So as per ur answer u went me to change only WERKS (at item level) while raising sales order for different plants.Is it enough?
Thnks&Rgds
NAG
Edited by: NAGA SUDHIR on Apr 3, 2009 6:46 AM

Similar Messages

How can we revise the pricing both at header and item level of sales order?

Dear All,
Now there's one issue of the pricing to me. i want to revise the pricing both at header and item level of sales order. but after i finished the cutomize and tested it, it's more different as i thought. i found that the pricing can revise at the one side only,for example, if i revise the pricing at item level and it's grey and can't be revised at the header. on the other hand, it's the same result what's happened at item.
So, in my opinion, we can't revise the pricing both at header and item, right? if not, please give me more advices and teach me how to solve the problem. thanks a lot.

Dear Lakshmipathi,
Thanks a lot for your kindly and useful answer for me and I learn more for the pricing technology.
I didn't notice the way that you reminded ago therefore I also saw the button at the condition tab. And your suggestion makes me know more.
And I had tested the way that you said, I met with a question. Below is my opinion for my testing.
I had created one SO and the pricing was $10, then I revised the pricing from 10 to 15 by VK11. It can't be updated automatically at SO and I must update it manually by clicking the "Update" button. This is OK for my testing, but I have another question to disturb you for the use of "Active" button. When I click the button and nothing is responsed, it's quite different what you said. So, please give more detail for the Active button. Thanks a lot.

Order and item status in sales order

We had multiple items in the sales order
for one of the item, the quantity was 5, but user cretaed a delivery of 8. but she only post goods issue for 5.
the delivery and order was open
at this stage the archival of delivery took place.
we changed the status in tables vbuk and vbup to complete.
but in the display of status in sales order, it still shows being processed.
What can we do now to set the order status and item status to COMPLETE.
Thank you for your reply

Hi,
This order status will not be complete unless the delivered quantity is equal to the order quantity. You have 2 options. 1. Change the order quantity to 8 and delliver the rest 3 and the order status will be set to COMPLETE. 2. Otherwise, reverse the PGI in VL09n and delete the delivery and create the delivery again for 5 qty. This will set the order status as COMPLETE.
Regards,
Raghav

Delivery of sub-items from a sales order

Hi experts,
We have a business requirement to be able to modify the customer's transmitted order line in a sales order. However, we would like to retain the customer's original order details.
In order to do this, we wanted to capture the original request as a line item in the sales order with a item category not relevant for delivery and billing. We then create a sub-item for the original line with UEPOS populated for the sub-item. This sub-item is relevant for delivery and billing.
However, we find that with the copy routine 101, SAP does not allow only the sub-item to be delivered. With the routine 110, SAP does bring in the sub-item, but blanks out the material number ( since it expects product substitution ).
Would appreciate inputs from the forum
Regards
Rohit Zalani

Hi Rohit,
It is ideally required to have both higher item and subitem in delivery. However the moment there is a sub item, the delivery quantity for higher level item becomes 0 and hence this will not affect the quantity to be delivered. Hence the presence of higher level item will not impact the delivery or PGI in anyway. You can check this.
Similarly for billing, you can check the Billing quantity field in copy control between delivery and invoice. The value has to be either G or H based on the scenario you want.
Having said all these things, I think just adding the customer entered material either in the customer material field in sales order (I think VBAP-MATWA) or in some other Z field will relieve you of this big complexity. So unless or otherwise your customer i adamant on this, you can think of a simpler solution than the multiple levels of items.

Detecting change on header and item texts for sales order in user exit

Hi,
In the user exit of VA02, I need to identify/detect if header or item texts for sales order is changed or not.
Please advise on this.
Regards,
Shreyas

Normally system stores the old values in XTables and new values in YTables. Check if you have access to these in your user exit. If you give the user exit name, someone will be able to guide you.
hith
Sunil Achyut

User Exit for Updating Delivery Plant at Item Level in Sales Order

Hello Experts
There is a requirement to determine the delivery plant for each item level and than update the items with newly determined plant. There is a user exit MV45AFZZ routine FORM USEREXIT_MOVE_FIELD_TO_VBAP. to update the item level entries in Sales Order in VA01 or VA02. Is this the right place to do this?, if yes , do i need to perform any other standard logic (like re determine Shipping points , schedule lines ) for newly determined plant? If not , can you please suggest any other place , BADI or user exit to change the delivery plant of sales order.
Thanks a lot....
-Harkamal

Best place is MV45AFZZ-USEREXIT_SAVE_DOCUMENT_PREPARE. Populates the values just before saving the document. You can have your own deriving logic. Make sure that peice of code is trigger only for Sales Order create or change (VA01/VA02).
Are you kidding??? You do realize that this is AFTER all validations against configuration, ATP, pricing, etc. have been performed??!!! Never, ever change a critical value like plant in the SAVE user exits...

Delivery tolerance at header and item level in sales order

Dear All,
My client wants to maintain delivery tolerance at both header and item level. NOTE: The tolerance at sales order header is different than the delivery tolerance at sales order item.
eg if i maintain 3% plus and minus tolerance at item, the header level tolerance can be 2%.
Also if there are more than 1 line items, the system should give warning message, when it finds that the delivery tolerance at item level can be maintained but that of the header level cannot be maintained and vice varsa.
Awaiting an early help and thankful for the same in advance.
Regards,
Avnesh Kamdar

Hi Avnesh,
Delivery tolerance can be made in the customer master,sales org data ---delivery tab.
Delivery tolerance is always at item level.
Reward points if it helps.
Regards
Karan

Complete Delivery at Line item level in Sales Order

Hello Gurus,
While creating a sales order for some customers (the sales area tab in the customer master data has complete delivery and full delivery at item level), the complete delivery flag should be enabled and partial delivery flag at item level shoulb be C.
We have a situation where this is not working in some cases. I need to know what user exits are copying the customer master data into the sales order fields. Please give me a lead how I can proceed with this.
Regards,
Balu

Hi Balu,
Please check user exits in program MV45AFZZ.
i.e USEREXIT_MOVE_FIELD_TO_VBAK
Regards,
Gumanti

Delivery block at item level in sales order,Qty should not be confirmed

Dear all
We have a below requirment
We will have multiple line items in sales order and put delivery block at item level.If delivery block is put at item level it should not confirm the qty and pass on to MRP
But if we put at header level delivery block,schedule line qty at item level are not getting confirmed.So requirements are not passed to MRP-This is correct .Working as per SAP standard configuration.
Can you tell how to activate the same for item level delivery block.if same delivery block is put at item level,it is confirming the quantity.But we don't want confirmation of qty to happen.
Can you give us solution
Regards
Sudha

We had similar issue , there will be confirmed quantity but the requirement will not transfer to MRP , We used Item category configuration ( Copied new item category assignment and it should behave as Inquiry item category)
Check OVZ7 T code for customizing the u201CDelivery Blocku201D in your sales document to block Confirmation block
Check the customizing OVZ8: if the flag Transfer of Requirement
Transfer of requirements of the requirement class should be ON.
In the sales order the requirement type is determined by the combination sales order item + MRP type.
Refer SAP Help URL below
[Setting a Delivery Block |http://help.sap.com/saphelp_470/helpdata/en/93/744bf2546011d1a7020000e829fd11/content.htm]

Delivery address on item level in Sales Order causes delivery split

Hi all,
I have an issue where our customer is sending in EDI-orders with delivery address on item level. This generates different SAP addresses for each line in the Sales Order later causing a delivery split in VL01n. Normally a SO contains 20 items where 10 needs to go to one physical address and the other 10 to another. What I would like is to only split on the physical address and not on each SAP address. E.g. 2 deliveries created instead of 20.
Its ECC 5.0.
Anyone has experience to share on this issue?
Thanks
BR
Peter

We had similar issue , there will be confirmed quantity but the requirement will not transfer to MRP , We used Item category configuration ( Copied new item category assignment and it should behave as Inquiry item category)
Check OVZ7 T code for customizing the u201CDelivery Blocku201D in your sales document to block Confirmation block
Check the customizing OVZ8: if the flag Transfer of Requirement
Transfer of requirements of the requirement class should be ON.
In the sales order the requirement type is determined by the combination sales order item + MRP type.
Refer SAP Help URL below
[Setting a Delivery Block |http://help.sap.com/saphelp_470/helpdata/en/93/744bf2546011d1a7020000e829fd11/content.htm]

How to auto reset delivery block in item level in sales order

hi i have one scenario. After creation of sales order it needs to be approved through work flow at item level so that without approval no delivery can be made. We have blocked the items in sales order now we want after approval the blocked status should be auto reset from block to free. how to do it.

Hi,
How is the approval taking place? Is it through work flow? If yes, You can write code for BDC or BAPI for removing the block after the approval step.
If it is manual approval, then you can write a program with BDC/BAPI for removing the block with input as sales order number.
Ask the approver to run this program after the approval.
Thanks,
Vinod.

Header Text And Item Text in Sales Order

Dear ALL
First one:
I have two different problems with text in sales order, when i create sales order after giving all the information like customer and material.
If i navigate through the Go To-- > Header ---> Text then there is a dump is any idea what all i need to check?
Error Message
A RAISE statement in the program "SAPLOLEA " raised the exception
condition "CNTL_ERROR".
Since the exception was not intercepted by a superior program
in the hierarchy, processing was terminated.
Short description of exception condition:
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls.
The termination occurred in the ABAP/4 program "SAPLOLEA " in
"AC_SYSTEM_FLUSH".
The main program was "SAPMV45A ".
The termination occurred in line 27
of the source code of program "LOLEAU02 " (when calling the editor 270).
Second one:
when i am creating the sales order without enter the quantity , customer and material if i navigate through the Header Text or item Text i can able to go but there in no dump, the moment i enter the quantity for the material then it over writes all the text in item and header.
Any suggestions please?
Thanks & Regards,
Veer

Dear Veer,
          Please take the help from the technical people to fix the issue because it may related activation some Z developments which are related to the text.
Check the text determination procedure configuration settings also whether the text is calling from the Customer master and Material master.
If the text is calling from the master data maintain the text in the master data then try.
I hope it will help you
Regards,
Murali.

How to header and item data of sales order using bapi interface

hi friends,
   i am geetha, i having a problem like how to upload sales oder header and item data through va01 tcode using BAPI FUNCTION MODULES.
i need bapi function modules for header adn item data and brief explation on that , how to pass importing and tables parameters to get exact output .
regards
geetha.

Use : BAPI_SALESORDER_CREATEFROMDAT2
Sales order: Create Sales Order
Functionality
You can use this method to create sales orders.
You must enter at least sales order header data (via ORDER_HEADER_IN structure) and partner data (via the ORDER_PARTNERS table) as input parameters.
Enter the item data via the ORDER_ITEMS_IN table. You can allocate item numbers manually, by filling in the relevant fields, or the system does it, according to the settings for Customizing, by leaving the relevant fields blank.
If you have configurable items, you must enter the configuration data in the ORDER_CFGS_REF, ORDER_CFGS_INST, ORDER_CFGS_PART_OF and ORDER_CFGS_VALUE tables.
Credit cards can be transferred via the BAPICCARD structure, on the one hand, data for card identification, on the other, data for a transaction which has taken place in an external system.
Once you have created the sales order successfully, you will receive the document number (SALESDOCUMENT field). Any errors that may occur will be announced via the RETURN parameter.
If no sales area has been created in the sales order header, then the system creates the sales area from the sold-to party or ship-to party, who has been entered in the partner table. If a clear sales area cannot be created, you will receive a system message, and the sales order will not be created.
Notes
1. Mandatory entries:
ORDER_HEADER_IN : DOC_TYPE     Sales document type
                   SALES_ORG    Sales organization
                   DISTR_CHAN   Distribution channel
                   DIVISION     Division
ORDER_PARTNERS..: PARTN_ROLE   Partner role, SP sold-to party
                   PARTN_NUMB   Customer number
ORDER_ITEMS_IN..: MATERIAL     Material number
2. Ship-to party:
If no ship-to party is entered, use the following: Ship-to party =
sold-to party.
3. Commit control:
The BAPI does not have a database commit. This means that the relevant application must leave the commit, in order that can be carried out on on the database. The BAPI BAPI_TRANSACTION_COMMIT is available for this.
4. German key words:
The following key words must be entered in German, independantly of
the logon language:
DOC_TYPE     Sales document type, for example: TA for standard order
PARTN_ROLE   Partner role, for example: WE for ship-to party
Further information
You can find further information in the OSS. The note 93091 contains general information on the BAPIs in SD.
Parameters
SALESDOCUMENTIN
ORDER_HEADER_IN
ORDER_HEADER_INX
SENDER
BINARY_RELATIONSHIPTYPE
INT_NUMBER_ASSIGNMENT
BEHAVE_WHEN_ERROR
LOGIC_SWITCH
TESTRUN
CONVERT
SALESDOCUMENT
RETURN
ORDER_ITEMS_IN
ORDER_ITEMS_INX
ORDER_PARTNERS
ORDER_SCHEDULES_IN
ORDER_SCHEDULES_INX
ORDER_CONDITIONS_IN
ORDER_CONDITIONS_INX
ORDER_CFGS_REF
ORDER_CFGS_INST
ORDER_CFGS_PART_OF
ORDER_CFGS_VALUE
ORDER_CFGS_BLOB
ORDER_CFGS_VK
ORDER_CFGS_REFINST
ORDER_CCARD
ORDER_TEXT
ORDER_KEYS
EXTENSIONIN
PARTNERADDRESSES
Exceptions
Function Group
2032

Delivery quantity of items cannot exceed sales order quantity

hi,
Could you all please help me regarding how to block a transaction if the delivery qty. is more than sales order quantity used to make the delivery.
we normally have multiple SO's to one delivery and also multiple deliveries to 1 SO
regards

Hi,
Please refer to this threads
Block the Quantity in Sales Delivery
Approval Procedure for chaning quantity in Delivery Document
Regards,
Vijay kumar
SAP Business One Forums Team

Header Text and Item Text for Sales Order

Hi,
Can any one help me on Header Text and Item Text............ ASAP.
STXH & STXL
TDOBJECT :
TDID:
TDNAME :
Regards,
Raghunath.S

Hi Raghunath,
Go to the text in plain page mode, and then you do via the menu 'GoTo' -> 'Header' and you get the parameters you need ( object, name, id, ...).
Repeat this operation for each text.
Tips : If you want to handle those text, use FM : READ_TEXT, EDIT_TEXT, and SAVE_TEXT...
Hope this helps,
Erwan

Difference B/W Delivery plant and item plant in Sales Order

Similar Messages

Maybe you are looking for