Difference bet. ECC 6.0 & 5.0

Can you please tell me the difference bet. ECC 6.0 & ECC 5.0

check this [link|http://solutionbrowser.erp.sap.fmpmedia.com/]
Regards,
Nikunj Thaker.

Similar Messages

Key Differences in ECC 6.0 and 4.6C with respect to SAP SD Module

Dear All,
I would like to know the know the Key Differences in ECC 6.0 and 4.6C with respect to SAP SD Module. I have already gone throught the release notes and
upgrade erp in service.sap.com. I have also checked solution browser.
Its Urgent.
Regards,
Rakesh

Hi Rakesh,
Some of the differences are:
1. Document Flow
In ECC 6.0, The flow of sales documents is seen much better and improved as compared to 4.6C. Once You look at the screen, You will clearly figure out the difference.
2. Sales Order Look and Feel
There are more tabs in ECC 6.0 for Item Level Details.
The Sales Doc. appears as supremely perfect.
3. ECC 6.0 is built on NetWeaver Technology (that possess SOA i.e. service oriented architecture) , Hence more reliable and Improved as compared to previous one.
Hope this will help you. Reward if found useful
Regards,
Gaurav Raghav

Difference between ECC 6.0 and earlier versions

Hi,
one of the difference between ECC 6.0 and earlier versions is that instead 'WS_UPLOAD' and 'WS_DOWNLOAD' in ECC we should use 'GUI_UPLOAD' and 'GUI_DOWNLOAD' respectively.
(of course SPDD and SPRO tcodes is known by everone i suppose)
Similarly can u all put down some differences here, atleast one entry by each, I think we can make a good docu. I have searched the net for the differences but could not get much, so by each of us contributing one each, it would become good docu..for all of us.
Thanx in advance

Unicode Errors Encountered and their Solutions
E1. In u201CTEXT MODEu201D the u201CENCODINGu201D addition must be specified.
     Error:
     OPEN DATASET FILE FOR OUTPUT IN TEXT MODE.
     Solution:
     OPEN DATASET FILE FOR OUTPUT IN LEGACY TEXT MODE.
E2. In Unicode, DESCRIBE DISTANCE can only be used with the IN BYTE MODE or IN
      CHARACTER MODE addition.
     Error:
     DESCRIBE DISTANCE BETWEEN T_KOMK AND T_KOMK-HIEBO01 INTO BPOS.
     Solution:
DESCRIBE DISTANCE BETWEEN T_KOMK AND T_KOMK-HIENR01 INTO BPOS
IN CHARACTER MODE.
E3. u201CUSR02-UFLAGu201D must be a byte-type field (Typ X or XSTRING )
     Error:
     IF USR02-UFLAG O YULOCK.
     Solution: Since the data type of USR02-UFLAG is type INT and is compared with data type
                X u2013 Hence the error. So we define a new variable ZULOCK and assign the
                value of USR02-UFLAG to ZULOCK.
              New variable
              DATA: ZULOCK(1) TYPE X.   "APBRP00
              Assign value
                            ZULOCK = USR02-UFLAG.
        Compare -
               IF ZULOCK = YULOCK.   u201Creplace IF USR02-UFLAG O YULOCK.
E4. HT cannot be converted to a Character type field
Error :
WRITE ht TO t_data+10(2).
Solution : Since the data type of ht is a type u2018Xu2019 and the data is been transfer to
         t_data which has a data type u2018Cu2019. value of one data type cannot be copy to
         another data type where one of them is type string .Hence the error occur,
         so the data type of ht is been change to Type u2018Cu2019
     OR
           A Tab ( value 09 ) is introduced as part of the row. The value 09 is not converted in Unicode environment. Instead we need to use class
     Error:
          DATA: BEGIN OF ht,
               x(1) TYPE x VALUE '09',
          END OF ht.
     Solution:
              Define Class after the Tables definition.
                   CLASS cl_abap_char_utilities DEFINITION LOAD.
              Data Defination : Comment internal table HT and define a variable HT type C.
       *   Insert + APRIA00 05/02/2007 Unicode project
       *   DATA: BEGIN OF ht,
     *         x(1) TYPE x VALUE '09'
       *   END OF ht.
     *   Insert - APRIA00 05/02/2007 Unicode project
       DATA HT type C.
       Before using HT assign Horizontal tab.
                 Ht = CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB.
E5. In Unicode programs the u201C#u201D cannot appear in names, as it is does here in the name    u201C#LINESu201D
     Error :
     #LINES                 TYPE I,
     Solution : Since the # is used in the start of name, it is not allowed. We need to
              remove it.
     Solution for the above
     V_LINES                 TYPE I,
E6. In u201CTEXT MODEu201D the u201CENCODINGu201D addition must be specified as well as the addition was required FOR OUTPUT,FOR INPUT, FOR APPENDING OR FOR UPDATE was expected.
     Error:
     OPEN DATASET PATH_NAME IN TEXT MODE.
     Solution:
     Download =     OPEN DATASET PATH_NAME FOR OUTPUT IN LEGACY TEXT MODE.
     Upload        = OPEN DATASET AUSZUG-FILE IN TEXT MODE FOR INPUT ENCODING DEFAULT.
E7. u201CTABu201D must be a character-type data object( data type C,N, D, T or String). Field string)
     Error:
            data: begin of tab,                   "Excel Parameter Split at TAB
        t type x value '09',          "Tabulator
       end of tab.
            concatenate 'Material' 'Package Status'
                into z_download-line separated by tab.
            ( In the above command the two field are to be separated with a horizontal Tab. The earlier      way of assigning the tab value u201809u2019 will not work in Unicode environment.
     Solution:
     Define a class just after the Table defination.
          CLASS cl_abap_char_utilities DEFINITION LOAD.
            Define variable Tab as shown below :
          Data : TAB           TYPE C.
     Before the concatenate statement assign the value of Tab using pre-defined attributes.
          TAB = CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB.
E8. Upload/Ws_Upload and Download/Ws_Download are obsolete, since they are not Unicode-
      enabled; use the class cl_gui_frontend_services
     Error-1: Function WS_DOWNLOAD is obsolete in Unicode environment.
            call function 'WS_DOWNLOAD'
                 exporting
                      filename = zfilename
                 tables
                      data_tab = z_download.
     Solutions-1: Instead of WS_DOWNLOAD use GUI_DOWNLOAD.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
*   BIN_FILESIZE                  =
    FILENAME                      = zfilename
TABLES
    DATA_TAB                      = z_download.
E9. The "/" character is reserved for identification of namespaces. It must be entered twice.
        The name of a namespace must be at least 3 characters long.
     Error :
                 U/N(3)        TYPE C, "U/N    --> ERSETZT DURCH SPACE
     Solution :
     * Special character can not be used to define a data variable
     *      U/N(3)        TYPE C, "U/N    --> ERSETZT DURCH SPACE
              U_N(3)        TYPE C, "U/N    --> ERSETZT DURCH SPACE
     * Insert - APSUS02 07/02/2007 Unicode Project
E10. "LP_TAB" and "CS_TAB" are not mutually convertible. In Unicode programs,
         "LP_TAB" must have the same structure layout as "CS_TAB", independent of the length
         of a Unicode character.
     Error : This error is encountered when data from one internal table is copied to another
                         internal table which different structure. In this case its LP_TAB & CS_TAB.
                 LP_TAB[] = CS_TAB[].
     Solution :
          * Replace + APSUS02 07/02/2007 Unicode Project
*   LP_TAB[] = CS_TAB[].
              move-corresponding CS_TAB to LP_TAB.
          * Replace + APSUS02 07/02/2007 Unicode Project
E11. Could not specify the access range automatically. This means that you need a RANGE
          addition.
     Error : Range need to be specified as an addition to the command.
            DO 4 TIMES VARYING HELP_CHAR FROM ABCD(1) NEXT ABCD+1(1).
           Solution :
            DO 4 TIMES VARYING HELP_CHAR FROM ABCD(1) NEXT ABCD+1(1)
          * Insert + APSUS02 07/02/2007 Unicode Project.
                                                      RANGE ABCD+0(4).
* Insert - APSUS02 07/02/2007 Unicode Project.
E12 . Processing Terminated Error code: Error in opening /
                                          Path not found when downloading to Unix directory.
     Error : PARAMETER: outfile(92) DEFAULT
              '/CP/interface/NPP/data/MX/cbslaprcpts'
                    LOWER CASE,
               kmxmstrd AS CHECKBOX.
            This error is encountered when the path is missing. The above path is related to CCP.
     Solution: For testing purpose comment the original path and replace it with
                                 /CP/interface/CCD/Unicode_test/
E13.    Upload/Ws_Upload and Download/Ws_Download are obsolete, since they are not                                                                       Unicode- enabled; use the class cl_gui_frontend_services
     Error: Function WS_UPLOAD is obsolete in Unicode environment. (During UCCHECK)
               Call function 'WS_UPLOAD'
       Exporting
            Filename                = zfilename
            Filetype                = u2018DATu2019
       Tables
            data_tab                = z_upload
       Exceptions
            Conversion_error        = 1
            file_open_error         = 2
            file_read_error         = 3
            invalid_table_width     = 4
            invalid_type            = 5
            no_batch                = 6
            unknown_error           = 7
            gui_refuse_filetransfer = 8
            others                  = 9.
     Solution: Instead of WS_UPLOAD use TEXT_CONVERT_XLS_TO_SAP. Do not use temporary file put the file name as it is.
1) First define a type pool and a variable of type truxs_t_text_data.
TYPE-POOLS: truxs.
DATA: it_raw TYPE truxs_t_text_data.
     2) Use this it_raw in the function module in parameter i_tab_raw_data. Put file name and the internal table in the function module.
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
    EXPORTING
*     I_FIELD_SEPERATOR        =
*      i_line_header            = ' '
      i_tab_raw_data           = it_raw       " WORK TABLE
      i_filename               = zfilename
    TABLES
      i_tab_converted_data     = z_upload[]    "ACTUAL DATA
   EXCEPTIONS
      conversion_failed        = 1
      OTHERS                   = 2.
     Comment u201Ci_line headeru201D. It takes the first/ header line of the file which is to be uploaded.
Put square brackets after internal table as shown above.
E14.    CURSORHOLD may not be converted into a number.
     Error: GET CURSOR LINE CURSORHOLD VALUE CURSOR_HOLD.
     Solution: In the declaration part of CURSORHOLD, one field is of u2018Pu2019 type and one field is of u2018Iu2019 type, which is not allowed in Unicode environment.So change the the type of it to NUMC.

Difference between ECC 6.0 & SAP 4.7

Hi
Can anybody help in explaining the difference between ECC 6.0 and SAP 4.7. I wanted the detailed difference between these two.
You can reach me at [email protected]
Thanks & Regards
Nisad

Hi,
Did you search using Solution Browser. This will display the delta functionality. Access is at -
http://solutionbrowser.erp.sap.fmpmedia.com/
Cheers !

Difference in ECC & SWI1 ?

hi
Whats the main Difference between ECC 6.0 and SWI1 in SAP 4.6C ?

Hi Sumit
Take a Look On this Wiki Link
this Link Will help in Solving difference between ECC & SWI1
https://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=60575
Regards
Saurabh Goel

What is interactive report , difference bet interactive and classic report

what is interactive report , difference bet interactive and classic report

Hi
Check this thread to get more idea about ALVs.
Interactive ALV
DIRLL DOWN AND INTERACTIVE REPORT
http://www.sap-img.com/abap/difference-between-drilldown-report-and-interactive-report.htm
As the name suggests, the user can Interact with the report. We can have a drill down into the report data. For example, Column one of the report displays the material numbers, and the user feels that he needs some more specific data about the vendor for that material, he can HIDE that data under those material numbers.
And when the user clicks the material number, another report (actually sub report/secondary list) which displays the vendor details will be displayed.
We can have a basic list (number starts from 0) and 20 secondary lists (1 to 21).
Events associated with Interactive Reports are:
AT LINE-SELECTION
AT USER-COMMAND
AT PF<key>
TOP-OF-PAGE DURING LINE-SELECTION.
HIDE statement holds the data to be displayed in the secondary list.
sy-lisel : contains data of the selected line.
sy-lsind : contains the level of report (from 0 to 21)
Interactive Report Events:
AT LINE-SELECTION : This Event triggers when we double click a line on the list, when the event is triggered a new sublist is going to be generated. Under this event what ever the statements that are been return will be displayed on newly generated sublist.
AT PFn: For predefined function keys...
AT USER-COMMAND : It provides user functions keys.
TOP-OF-PAGE DURING LINE-SELECTION :top of page event for secondary list.
http://abapprogramming.blogspot.com/search/label/INTERACTIVE%20REPORT%20BASICS

What is difference bet call transaction and session method in BDC

hi
what is difference bet call transaction and session method in BDC
thanks.

Hi,
Session method.
1) synchronous processing.
2) can tranfer large amount of data.
3) processing is slower.
4) error log is created
5) data is not updated until session is processed.
Call transaction.
1) asynchronous processing
2) can transfer small amount of data
3) processing is faster.
4) errors need to be handled explicitly
5) data is updated automatically
Check these link:
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
http://www.sap-img.com/abap/question-about-bdc-program.htm
http://www.itcserver.com/blog/2006/06/30/batch-input-vs-call-transaction/
http://www.planetsap.com/bdc_main_page.htm
call Transaction or session method ?
Thanks,
Reward If Helpful.

Difference bet'n item cat group & gen item cat group .

can anyone know about difference bet'n item cat group & gen item cat group in material sales view?

Dear,
Considerting the remaining answers above, Please have a look:
General item category grp is used in the sales processes like BOM, where we have higher item category and the default item
categories.
General item category grp would refer to the higher level item category and item category grp would refer to the default item category
General Item category Group is an extension item category group. Example: if one select item catagory group as NORM, but under item category group, NORM can further be classified as Service item, packagaing item or Normal
item using "general item category group".
Also, General item category group is maintained at client level, this field can be maintain from Basic Data View of Material Master. Thus in case item category group is missing, then general item category group is used for item category determination.
Item category group determines how a material is processed in the sales order. When processing sales and distribution
documents, the system uses the item category group to determine the item category and proposes it in the respective document. Item category group is defined in the Sales Org View 2 of Material Master Record.
Example, in the standard SAP System, the item category group NORM is defined for materials kept in stock and the group DIEN for services and non-stock material
In Simple:
Item Category determines the processing of any Item/material that we enter in a sales order and in this way it also effects the procesing of any sales doc in which it is used.
Item Category Group is one of the component which along with the Sales Doc Type, The Item Usage and Higher Level Item Category decide about the Item Category in a sales doc.
As per definition General Item Category Group & Item Category Group both are to detrmine Item Category in Sales Document.
the Item Category Group is used to determine Item Category.
General item category is a broader term and used other than SD processes
Regards,
Syed Hussain.

Difference bet se09 and se10

Hi all
pls tell the difference bet se09 and se10
Regards.
Nagendra.

hi nagendra,
chk this thread:
https://www.sdn.sap.com/irj/sdn/profile?userid=3498743
SE09 transaction is for workbench transport request wherein the developers can track their changes or modifications to the workbench objects .
Whereas SE10 is a customising transport request transaction.this is used for displaying customising requests. Sometimes this may be restricted to business analysts.
regards,
keerthi

Difference bet Authorized and unauthorized FC revaluation

<Deleted original post contents and retypes in capitalized alphabet - moderator >
What is the difference bet Authorized and unauthorized FC revaluation
Edited by: Arun Varadarajan on Sep 1, 2008 10:58 PM

solve

Difference Bet. rz01 and sm37

Dear All,
What is the use for RZ01 and what is the difference bet.. RZ01 and SM37.
Regards
Shankar.

Thanks resolving the Query.
few question i have doubt.
1)           what is listener
2)           Can i shift the control file to different folder / location in Oracle.
3)           Can anyone please guide the Homogeneous copy process steps.
              in SAP Note little bit confused like
Regards
SNB

Difference bet Thread and Runnable Inteface

what is the main difference bet Thread and Runnable interface. Where it is used Thread and Where it is used Runnable interface

http://www.javaworld.com/javaworld/jw-04-1996/jw-04-threads.htmlThere are a lot of differences, see the article above for details.
Generally, I would only extend Thread if I want to enhance/extend the functionality of how Threads work (like providing a Timer or a Clock, or something). If all I am doing is providing some work to be done in a separate thread, then I will create a class that implements Runnable and run it using new Thread(myRunnable).start(). Most of the time, I use Runnable, since rarely would I need to change how threads act.

Difference Bet Transformation and InfoSource

Difference Bet Transformation and InfoSource
Please search the forum before posting a thread
Edited by: Pravender on Sep 7, 2010 12:16 PM

Hi,
Infosource connects data source with Transformation (with transfer structure and communiocation structure).
Transforation is same as Update rule in 3.x. It connects one object to another and do the conversion/look up data load (if needed).
You may look for various documenat available at forums for the same.
I hope it will help.
Thanks,
S

Difference bet. SAP R/3 & SAP BUSINESS ONE

Hi,
Can u tell me Difference bet. SAP R/3 & SAP BUSINESS ONE ? It will be better if i get some screenshots of B1.
CAN U TELL ME STEPS OF OUTPUT DETERMINATION ?
RAJARSHI

HI
SAP Business One works well with companies who have been using
QuickBooks and Peachtree with few users and would like to take the next
step. There are add-ons that could take SAP B1 to a higher level but the
problem then is the financials in SAP B1 since they are extremely light.
Pls go through link which may hlp u out
http://blogs.ittoolbox.com/sap/kehinde/archives/sap-business-one-vs-sap-r3-system-architecture-13952
http://en.wikipedia.org/wiki/SAP_Business_One
http://www.datainfocom.in/services/SAP_Business_One-Brochure.pdf
SAP Business One is an integrated enterprise resource planning (ERP) software owned by SAP AG that targets business software requirements of small and medium sized enterprises (SMEs).
<b><b>OUTPUT DETERMINATION</b></b>
http://help.sap.com/saphelp_46c/helpdata/en/30/c6853488601e33e10000009b38f83b/frameset.htm
http://help.sap.com/saphelp_crm40/helpdata/en/b3/58bf39f7568648e10000000a11402f/content.htm
help.sap.com/bp_dbmv1500/DBM_DE/documentation/DBM_SF_CUSTOMIZING_GUIDE.doc -

Difference Between ECCS and BCS

Hello Everyone
Can any one explain briefly the difference between ECCS and BCS.
Your response will be highly appreciated.
Regards.
DC

Quick answer: EC-CS is on the R/3 platform, while BCS is on the BI platform.
This topic has been discused numerous times - please search the forum for more details if required.

Difference bet. ECC 6.0 & 5.0

Similar Messages

Maybe you are looking for