Difference between 122 & 102 movement types

Hi All SAP experts,
I have done 101 movement type with incorrect rate.
So i used 122 mov type for cancellation & then again have done 101 mov type with correct rate.
But accounting entries are going wrong in GI/IR account related with frieght,issurance & octroi.
The same GI/IR entries are passing in 122 mov type.
For GR reversal 102 is standerd one. ?????
If yes what is exact difference between 102 & 122 mov types in accounting view.
Please help me out.
Thanks in advance.
Regards
Gitesh

Jürgen L. ,
Ok fine but in case of frieght how both 122 & 102 works.(gi/ir account)
In migo (122) GI/Ir account is not hitted properly.
It debiting for two times in case of fright a/c.
Where as material gi/ir a/csa are hitting properly
Thanks once again

Similar Messages

Difference between Mb1b 541 Mov type and ME2O

Hi,
I want to know difference between Mb1b 541 Mov type and ME2O.
Thanks and regards
Gitesh

Hi,
ME20 has 2 options one to directly transfer, that is without delivery. And, anotehr is with delivery.
Option 1 will create a material document in ME20 transaction.
With option 2 it will create a delivery note. you have issue the material in vl02n if delivery note is created and then material documetn will get generated.
regards
alexandro.

Difference between 122 and 161 movement type

Hi,
Can anyone explain me the difference between 122 and 161 movement type?
How will be the finance postings?
Can these movement types will be used in outbound delivery? If so,what kind of scenarios this can be used?
Thanks
Srini

Hi
Both are belongs to vendor return
1. 122 - return to vendor -total consignment - return total received gr qty
Migo - return delivery with 122- j1is - credit memo
2. 161 - here you have to crate the return po. return to vendor for partial qty.
after po- gr - j1is-credit memo
Laxman

Difference between collect and move stmts

hi
anyone plz explain...
1. Difference between collect and move stmts
2. Badi and user exit.
gowri

Hi,
1.COLLECT:COLLECT is used to create unique or compressed datsets. The key fields are the default key fields of the internal table itab .
If you use only COLLECT to fill an internal table, COLLECT makes sure that the internal table does not contain two entries with the same default key fields.
If, besides its default key fields, the internal table contains number fields,the contents of these number fields are added together if the internal table already contains an entry with the same key fields.
If the default key of an internal table processed with COLLECT is blank, all the values are added up in the first table line.
If you specify wa INTO , the entry to be processed is taken from the explicitly specified work area wa . If not, it comes from the header line of the internal table itab .
After COLLECT , the system field SY-TABIX contains the index of the - existing or new - table entry with default key fields which match those of the entry to be processed.
COLLECT can create unique or compressed datasets and should be used precisely for this purpose. If uniqueness or compression are unimportant, or two values with identical default key field values could not possibly occur in your particular task, you should use APPEND instead. However, for a unique or compressed dataset which is also efficient, COLLECT is the statement to use.
If you process a table with COLLECT , you should also use COLLECT to fill it. Only by doing this can you guarantee that the internal table will actually be unique or compressed, as described above and COLLECT will run very efficiently.
If you use COLLECT with an explicitly specified work area, it must be compatible with the line type of the internal table.
In 'move' the actually data copies into another data field
2.
Difference between BADI and USER-EXIT.
i) BADI's can be used any number of times, where as USER-EXITS can be used only one time.
Ex:- if your assigning a USER-EXIT to a project in (CMOD), then you can not assign the same to other project.
ii) BADI's are oops based.
A. BAdI Definition
1. SE18
2. Enter the name for the BAdI to be created in customer namespace and press "Create".
3. Enter a definition for your BAdI and on the interface tab enter a name for the BAdI interface. SAP proposes a name and it is pretty good. Meanwhile a BAdI class is also created which is not in our concern.
e.g for "ZTEST", SAP proposes "ZIF_EX_TEST" for the interface and "ZCL_EX_TEST" for the class.
4. Save your BAdI.
5. Double-click on the interface name. It will pass to a Class Builder session to make you implement your interface. If you are not familiar to the Class Builder; it's a bit like Function Builder and it will be easy to discover its procedure.
6. Save and activate your interface.
B. Calling your BAdI from an application program
1. Declare a reference variable with reference to the Business Add-In interface.
e.g. DATA exit_ref TYPE REF TO zif_ex_test.
2. Call the static method GET_INSTANCE of the service class CL_EXITHANDLER. This returns an instance of the required object.
e.g.
CALL METHOD CL_EXITHANDLER=>GET_INSTANCE
CHANGING instance = exit_ref .
3. After those two steps, you can now call all of the methods of the BAdI where it is required in your program. Make sure you specify the method interfaces correctly.
C. BAdI Implementations
1. SE19
2. Enter the name for the BAdI implementation to be created in customer namespace and press "Create".
3. It will request the BAdI definition name to which this implementation will be tied.
4. Enter a definition for your implementation and on the interface tab enter a name for the implementing class. Again SAP proposes a name and it is pretty good.
e.g for "ZIMPTEST", SAP proposes "ZCL_IM_IMPTEST".
5. Save your implementation.
6. To implement a method, just double-click on the method name and you will be taken to the Class Builder to write the code for it. Here you redefine the BAdI interface methods.
7. You must activate your implementation to make it executable. You can only activate or deactivate an implementation in its original system without modification. The activation or deactivation must be transported into subsequent systems
Regards

PO Commitment Reversing after 102 Mov Type

Dear All,
Please suggest a wayout for the below issue.
Issue:
   When we are reversing Goods Receipt with 102 Movement Type, system reversing the total commitment created at the time of PO
Scanario:
The illustrated Example will give the complete information about the scenario and issue which i am facing.
Step1: Assignment of Budget
          Fund Center :      12345
          Commitment Item:   CITEM
          Budget Amount:     50000
Note:   I've Used the Symbol " | " to differciate the Values as Space is not showing in the posted Message
Step2: Material PO Created with Special Procurement Type Q
   For Ex:   Material     | Qty   |     PO Value |   Commitment Created (Budget Consumed in RS)
                   ABC        |   10    |       10000    |                    10000
Step3: when i see the FMB_PT01 report after PO Creation.
        Budget |   Bud-Pay |    Invoice   |   Bud-INV    |       Open Item    |   Res Budget
        50000   |          0       |          0      |          0         |            10000    |      40000
Step3: Goods Received against the above PO is 10 Qty for which Rs.10000 which is showing as follows in FMB_PT01
       Budget |   Bud-Pay |   Invoice   |    Bud-INV     |   Open Item |   Res Budget
       50000   |         0        |      10000 |        10000    |            0      |        40000
Step4: If i reverse the above GR then system is deleting all the consumed amounts and showing as follows
       Budget |   Bud-Pay |   Invoice    |    Bud-INV    |     Open Item | Res Budget
       50000   |        0         |        0        |          0          |           0         |      50000
As far as my knowledge, if i reverse the GR, system should only reset the Values under Invoice & Bud-Inv and reassign the value under Open Item, which is not happening in our scenario.
I hope, you all understood the scenario & issue which i am trying explain.
So, please suggest me wht went wrong and how to rectify that..
Thanks in Advance to All.
Edited by: RAJA TALLURI on Nov 2, 2010 6:33 PM

Dear Alex,
Thank you so much for the information
I've checked the note given by you, 1282074 this is only relevant for Amount type 0300 or it will rectify the error w.r.t amount type 0500 (Adjusted by Followon Document)
Actually, wht happening is say for example:
When i created the PO, in the report it will show amount type as 0100 (Original)
    and when i created GR w.r.t the PO, system should show as follows.
    At the PO 2 lines should be shown,,
         1. with Amount Type 0100 &
         2. line with Amount type 0500 which is not happening
in the place of amount type 0500 system showing 0200 (Reduction) which is wrong.
will the above specified note, solve this issue also or is there any other note .
Thanks.

PRD Account hit at the GR reversal (102 movement type)

Dear Experts'
At the time of Goods reversal through 102 movement type, system automatically hit PRD account and it
set off with freight clearing a/c.
Why PRD a/c will hit at the time of reversal?
Thnaks
Suman Mukherjee
MM Consultant

Hi,
In two different scenario, we have faced the same problem.
1. Reverse GR document in same period with back date
2. Reverse GR document in previous period .

Re -Reconcillation of subcontracting challan against "102" mov type mat doc

Dear All,
While we are doing the reconcilliation of the Material document (mov type-"102" ) against the subcontracting challan (ALREADY fully reconcilled against 101 material document, but not compeleted), then system is NOT allowing us to do the reconcillation, requirement is to reduce the qty assignment in already reconcilled challan, as we have reversed the material document
1.) When we have assigned the 102 movement type to movement type group to 0001( Issue movement type group)
then system is giving an error message : 8I567-Challan not valid, Material doc. is valid for another scenario during J1IFQ.
2.) and when we are assigning the 102 movement type to movement type group 0002( Receipt movement type group) , then system gives error message : 8I574 -Material XXX is not assigned fully, short by YYY KG
Please suggest the right way of doing it.
Thanks & Regards
Nitin Chhabra

Hi
If a challan is reconciled it should not be opened again. That is illegal. You need to do subsequent adjustment if you want to alter your consumption in subcontract. If you do 102 and reverse your consumed material,You need to include 544 movement type in your movement type grouping then You need to create a new 45a challan.
Regards
Antony

Difference between F1 & F2 billing types

hi,
can any body explain the difference between
F1 & F2
Billing types
regards
balaji.t

Normally F1 is called Order related Billing type whereas F2 is called Delivery related Billing type.
You can also create both F1 nad F2 type of billing from LF.
If , F1 TYPE OF BILLING IS CREATED FROM lf, THEN PRICE IS RE-RUN, that means it considers latest price but not in F2 billing type in standard settings.
This is controlled from the copy control table.
Normally, from F2 type of Billing document DR type of Accounting document is created,
from Billing type G2, Accounting document type DG iscreated and from L2 type of Billing document, NN type of Accounting document is created in FI.
These accounting documents can be identified by their Number range also.
If the "Document Type" fIeld is blank in the Billing type (VOFA), then it may be any Billing document system will create accounting document under Document Type "RV", irrespective of the Billing type.

2LIS_02_ITM not considering 102 movement type

Hi Friends
We are facing a issue with the extraction of data from 2LIS_02_ITM. The system is not considering the 102 movement type ie the receipt returned quantity.
Cheers
Shivkumar

Hi Friends
We are facing a issue with the extraction of data from 2LIS_02_ITM. The system is not considering the 102 movement type ie the receipt returned quantity.
Has any one faced a similar problem? If yes, please let us know what correction actions were taken.
Any help will be highly appreciated
Cheers
Shivkumar

Difference between fully-specified data types. and generic types

Hi,
Can anyone tell me the difference between fully-specified data types and generic types.
Thanks in advance.
Regards,
P.S.

HI
Generic table types
INDEX TABLE
For creating a generic table type with index access.
ANY TABLE
For creating a fully-generic table type.
Data types defined using generic types can currently only be used for field symbols and for interface parameters in procedures . The generic type INDEX TABLEincludes standard tables and sorted tables. These are the two table types for which index access is allowed. You cannot pass hashed tables to field symbols or interface parameters defined in this way. The generic type ANY TABLE can represent any table. You can pass tables of all three types to field symbols and interface parameters defined in this way. However, these field symbols and parameters will then only allow operations that are possible for all tables, that is, index operations are not allowed.
Fully-Specified Table Types
STANDARD TABLE or TABLE
For creating standard tables.
SORTED TABLE
For creating sorted tables.
HASHED TABLE
For creating hashed tables.
Fully-specified table types determine how the system will access the entries in the table in key operations. It uses a linear search for standard tables, a binary search for sorted tables, and a search using a hash algorithm for hashed tables.
Fully-specified table types determine how the system will access the entries in the table in key operations. It uses a linear search for standard tables, a binary search for sorted tables, and a search using a hash algorithm for hashed tables.
see this link
http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb366d358411d1829f0000e829fbfe/content.htm
<b>Reward if usefull</b>

Difference between .qt and .mov

Hi all
Please tell me what is the difference between .qt and .mov formats and when and where they are used. Also if there are any more formats related to Quick Time please brief or any links to any reference sections...
thanks

No difference except the file extension. The .mov extension should be used as .qt is very old and may not be understood by Web servers.
http://www.apple.com/quicktime/player/specs.html

Whats the difference between RFC destination of type "HTTP" and "TCP/IP"

Hi Folks,
I want to know the difference between RFC destination of type "H" and "T".
In what instances/tasks we would use them?
Looking forward for your valuable answers...
Cheers,
Ram.

Type of RFC connection.
By entering the type of RFC connection, you specify the communication method (TCP or SNA) and the logon type in the target sys
Type T (TCP/IP) destinations are connections to external programs that use the RFC API to receive 'Remote Function Calls'. You must specify the host name and the pathname of the program to be started. The communication method depends on how you select the program location.
Type H is the HTTP connection to R/3 system
Type G is the HTTP Connection to external server

Difference between Table and Table Type

Hi
Can you please let me know the
Difference between Table and Table Type and
Difference between Structure and Table Type?
Regards,
Sree

hi,
table is a data dictionary object in sap. table is of different types
1. transparent tables
2. pool tables
3. cluster tables
table type gives option for u to select different types of internal tables. they r
1. standard table
2. sorted table
3. hash table
Structures :
-Defined like a table and can then be addressed from ABAP programs.
-Structures contain data only during the runtime of a program.
-Just like user-defined data type.
- they are not present in database server and only on application server.
if helpful reward some points.
with regards,
Suresh Aluri.

What is the difference between avi and mov

Hi FCP users,
I am actually an audio guy, but I would like an answer on something.
I work with Logic, and usually use quicktime movies when I am working to movies. But I am working with a client who is an Avid user and swears by avi files. Can someone explain to me the difference. My client explained to me that avi's are better than mov files. He claims their file sizes are bigger, so therefore there quality is better. He said there is some form of compression on quicktime movies which lessen the quality to avi, even if the mov is uncompressed apparently the quality is still less than an uncompressed avi. If this is not true, could someone give me the real big difference between the two.
I thought is was more of a preference, like windows users prefer wav, and apple users like quicktime movies. Like with audio, there isnt a huge difference between aif and wav. Windows users prefer wav and apple users aif.
Thanks in advance for any information.

gazo wrote:
The vid guy has sent me some files to work with. So I am working in Final Cut to edit some of the video, and then sending it back to him. He is working on PC with Avid. What is the best. Should I convert the avi files he has sent to me to mov files. Then pull these into FCP, and then export it out as avi for him. Or should I export out as mov, and then he converts them to avi when he pulls it into Avid on his PC? Very confusing which is the best procedure between Mac and PC.
Thanks in advance for any help.
This is a disaster in the making. You can avoid being part of the train wreck by either renting an Avid, going to live at his house, or telling him to get a Macintosh.
You must find the lowest common denominator video format that will work on both of your systems. That could be conventional DV, dunno, never used Avid and never tried to edit anything on a PC. But I can tell you this with absolute certainty, it will be easier and, in the end, much less expensive for one of you to adopt the other's platform for the duration of this project. The time you waste transcoding, arguing, formatting your drives, buying secondary products, fitting round pegs into square holes, and trying to find a workable solution (that will keep changing as the project gets more complicated) will cost you much more in terms of money out of pocket and creative frustration than simply buying/renting another station.
bogiesan

RG1 Updation for 102 mov type

Dear all,
RG1 relevance was set for movement type 101 gr against order.However 102 was not made relevant for Rg1 ,some documents were reversed using movement type 102 after that 102 was made relevant for RG1. Now when i am going to update RG1 for 102 material documents in J1I5 none of the material documents are getting selected ,Kindly suggest some way to update RG1.

hi,
Conceptually and as per rules u cannot reverse the entries of RG1.u can scrap but cannt reversed.
that is why 102 is not updating RG1.
in short it is better that u take goods to RG1 when u want to sell them.
regards,
sujit borse

Difference between 122 & 102 movement types

Similar Messages

Maybe you are looking for