Difference between a Character mode and Bitmap mode reports
What are the differences between a character mode and bitmap mode reports
hi saikumar
In Oracle Reports Designer, character mode, the
APPLICATIONS STANDARDS REQUIRE the report to be designed in
ONE FONT/ ONE CHARACTER SIZE. Character mode reports
generate ASCII output. In ASCII you cannot dynamically
change the font and character size. The standard is in
effect so a report prints as identically as possible from
both conventional and postscript printers....
by
stanma
Similar Messages
-
Difference between "change auth data " and "expert mode" in pfcg
Gurus ,
i need to know , what is the difference between
"change authorization data "
and
"expert mode for profile generation" in PFCG .
and what is the significance of the three options that we get when we choose expert mode ?Hi Susin,
To change the authorization data for the transactions assigned to the role, choose Change Authorization Data or Expert Mode for Profile Generation.
If you are generating the profile for the first time, there is no difference between the two modes.
When you change a role, you must regenerate the authorization profile. In this case, the status of the profile generation is displayed red or yellow at the top of the Authorizations tab page.
If the status display is red, you must perform an authorization data comparison, since the menu was changed since the last profile generation or no authorization data exists.
If the display is yellow, the authorization data for the role was changed and saved after the last generation. The generated profile is no longer current. You need to regenerate it.
The significance of the three options that we get when we choose expert mode is as follows:
Choose one of the options to maintain the authorization values (in normal mode, the correct option is automatically set):
1> Delete and recreate profile and authorizations
All authorizations are recreated. Values which had previously been maintained, changed or entered manually are lost. Only the maintained values for organizational levels remain.
2> Edit old status
The last saved authorization data for the role is displayed. This is not useful, if transactions in the role menu have been changed.
3> Read old status and compare with new data
If you change transactions in the role menu, this option is the preconfigured. The profile generator compares the existing authorization data with the authorization default values for the menu transactions. If new authorizations are added during this process, they receive the status New. Authorizations that already existed receive the status Old.
Note the following during the comparison:
Values for organizational levels that are no longer required are deleted, all others are retained. If new organizational levels are added, you need to maintain them.
The standard authorization for the object S_TCODE is always automatically filled with the current transactions from the role menu. It cannot be copied or manually changed, only deactivated.
Thanks,
Saby.. -
Difference between G/L Balance and Inventory Audit Report
Hi All,
while checking the G/L ledger for Inventory account and the Inventory Audit report, there is a difference between the amounts posted. The closing balance till 31/03/09 is fine but afterwards the balance is not matchin at all. I hav tried to check between various posting dates but still there are differences. Any suggestions why there are differences and how should i check them??
Thanks in advance,
JosephThe GL account and the Inventory audit report will not tie for a couple of reasons:
- You have posted directly (JE) to your Inventory account. These amount since they are NOT tied to a Item in a transaction will not appear in the Inventory audit report. The Inventory account(s) should be treated like a control account (enthough they
cannot be set as one in SAP B1) and should not be posted to directly outside of the Item Inventory Transaction (GRPO, AP Inv, AR INV, DN, AR CM, AP CM, etc...) I have alos seen these posting when GL determinations are setup incorretly or when users use the inventory account in Stock Posting (staock taking) transactions
- you have legacy issues resulting in audit report entries relating back to pre SP01 2005 days.
To get these details analyzed by SAP for free along with the recomended corrections please contact your partner for a free Inventory Verification analysis Your partner can take a copy of your DB backup and create a support message under SBO-MM-IVC and SAP support will analyse these differenes and show you the recommended changes.
hope this helps -
Difference between Oracle Application Express and Oracle Forms/Reports
hi guys,
i have just use oracle apex to create some report generation tools through the web. know that this is what is known as html db in the past.
however, i have not really touch oracle forms and reports before, neither have i really seen how they work.. but soemhow i feel oracle report/forms seems to be more.. then this oracle apex.
it includes integration with web services, java and pl/sql .
but i still cant really figure out what is the actual general main difference ?
is it that for oracle forms there can be some programming logic inside , whereas for apex , it is just using what is available from what oracle provides ..
i am read oracle form white paper, but seriously, i am not a very web guy. it has alot of components that i am not familiar with.
so i hope you guys can just give me a more general rough idea.
regards,
Noob.Hi, my .05$
... most Forms & Reports users will tend to be old installed base customers using applications developed many years ago in F&R such as insurance company cores and even banking cores. Going from client/server F&R6 to "web" F&R10g is costly as you have to license an application server and most likely need to migrate to recent versions of the DB in case the customer is still on oracle 8 (common occurrence). So many customers opt. to not migrate or to simply invest in new web enabled solutions.
Using the migration tool f&r installed base will have an easier job of migrating and at a price of whatever DB edition they are using and probably be able to do it with the same people who maintain their f&r systems provided they learn a bit about web technologies.
what might be interesting to see is performance perception of users on f&r vs. apex...
regards,
luis aranguren -
What is difference between TEXT mode and BINARY mode?
Hi,
What is difference between TEXT mode and BINARY mode? In TEXT mode what is "ENCODING DEFAULT".
OPEN DATASET wl_filename FOR INPUT
IN TEXT MODE ENCODING DEFAULT.
OPEN DATASET wl_filename FOR INPUT
IN BINARY MODE .Hi vishnu,
1. files like .TXT files are considered to be text,
and other files like .EXE . DOC etc are binary files.
2. In text files, after each line, there are two
internal binary characters
one for line feed and another one for newline.
3. But, we don't have any meaning for it,
when we view such files in notepad, for eg.
Hence, to only get the understandable content,
we should open such TXT files, in text mode.
(we can also open them in binary mode,
but we will get two extra characters after each line,
and such two extra characters are meaningless
for interpreting the text)
4. In binary mode, each byte by byte is considered,
without any meaning.
regards,
amit m. -
What is the difference between LTE mode, CDMA mode, LTE/legacy 3GGPP mode, and Global mode in Preferred Network?
Great question alczervik!
LTE- is our 4G network.
All CDMA/LTE Legacy are going to be related to our 1X, 3G/ EVDO network.
Global is GSM. Meaning you can use Internationally.
I hope this helps.
VanessaS_VZW
Follow us on Twitter @VZWSupport -
Difference between bridge mode and routed mode on CSS
Hi,
Could some one tell me the difference between routed mode and bridge mode.
Regards
NehaHi,
routed mode:
The CSS acts as a router, it routes packets from the client to the server. The server has the ACE configured as default-gateway.
There is a client-side VLAN and a server-side VLAN. These VLANs have different subnets.
Bridged mode:
The CSS acts as a bridge, it switches frames from the client to the server. The server has the upstream router configured as default-gateway.
There is a client-side VLAN and a server-side VLAN. These VLANs have the same subnet, but different VLAN IDs. The ACE bridges the client traffic from the client-side VLAN to the server-side VLAN.
Bridged mode would be most used in case one cannot change the servers IP addresses, or if address space is an issue.
Hope this helps.
Kind regards,
Dario -
What is the difference when bouncing a Logic Pro X project to Stereo Mode and Normal Mode?
I was was working on a Logic Pro X Project which I am using as a Sequence for a band. When I completed my project, I mixed for left side to hear the Click track and I panned everything else to the right side. After I completed my project, I bounced to Mp3 in Normal Stereo Mode and after opening in iTunes I discovered that I am hearing the click on the right track. I again bounced and tried the Joint Stereo Mode thinking that would fix it but I still get the click track on both left and right. What is the difference between bouncing to Normal and Joint Stereo.
My goal is to produce a 2 track Mp3 Sequence so that all my click track is only heard on the left side and the produced audio is heard only on the right side.
Any suggestions?FIrst, try to bounce to uncompressed aiff or wave and see if you get perfectL-R separation.
The compression algorithm does its voodoo and maybe some of the left right separation gets messed up with it.
About Joint Stereo.
The idea behind is to save data. The algorithm analyzes the stereo signal, when it sees signals/frequencies that are in the left and right channel, then it says, "having the same signal on the left and right channel is the same as storing only one channel (mono ), and when played back send that one channel to the left and right speaker. it saves you half the storage/transmission". However, you have to trust the voodoo again to think that if what comes out is the same as what went in.
If size and transmission speed isn't an issues, don't use Joint Stereo.
Hope that helps
Edgar Rothermich
http://DingDingMusic.com/Manuals/
'I may receive some form of compensation, financial or otherwise, from my recommendation or link.' -
Flipping between AT&T LTE and Emergency mode
Greetings,
I am the proud new owner of a BlackBerry Z10. Within a few days of getting the phone, I noticed it was flip-flopping constantly between AT&T LTE and emergency mode. I could not make or receive calls, and text messages I sent were often received multiple times. Here are some of the steps I took to try and resolve the problem:
1. Went to the AT&T store and had a new SIM card installed
2. Several days later, I went back since the problem persisted. They provided a replacement phone.
3. Performed a security wipe, interrupted it part way through, and performed a fresh install from a PC using BB Link.
4. Called AT&T support, who suggested replacing it with yet another phone. However, this didn't seem helpful since I purchased the original phone in Pennsylvania and swapped it out the first time in Texas - I wouldn't think they'd have phones from the same "batch" in such geographically disparate locations.
I'm out of ideas on what else could be causing this and would greatly appreciate any insight the community here could provide!
Thanks in advance!
Solved!
Go to Solution.Thank you for the help and suggestions! I worked with AT&T support and they "did something" ...the phone has been stable and working flawlessly for a few weeks now. Unfortunately I'm not sure exactly what they did to correct the problem; all I know is that it went to their "L3 support" who in turn worked with Blackberry. It took them about a day to fully fix the issue but since then, it's been all blue skies.
Thanks again! -
Timeline window missing button to switch between frame mode and timeline mode
I'm using Photoshop CS6 Extended.
This is what my timeline looks like now.
In tutorials they refer to a button that should be to the left of the drop menu that says "forever". The button is supposed to allow you to switch between frame mode and timeline mode.
this is what the timeline window looks like in timeline mode and with the button that allows you to switch.
I've already tried reinstalling and upgrading to CS6 extended, as some forums suggested.
Please help. Animation is the core reason that I need photoshop and without this button I'm extremely limited. Thanks.OK. This should work. Copy and past the below script into Script Editor, save it as an AppleScript application to the Desktop. Double-click it and it should change to grayscale. Double-click it again and it'll toggle back.
tell application "System Preferences" to activate
delay 1
tell application "System Events"
tell process "System Preferences"
click the menu item "Universal Access" of the menu "View" of menu bar 1
click the radio button "Seeing" of the first tab group of window "Universal Access"
click the checkbox "Use grayscale" of tab group 1 of window "Universal Access"
end tell
end tell
tell application "System Preferences" to activate
delay 1
tell application "System Events"
tell process "System Preferences"
click the menu item "Universal Access" of the menu "View" of menu bar 1
click the radio button "Seeing" of the first tab group of window "Universal Access"
click the checkbox "Use grayscale" of tab group 1 of window "Universal Access"
end tell
end tell
tell application "System Preferences" to quit -
Hook to run script between Consumption mode and Contribution mode
Hi,
I am developing a Web Portal page with a Region Template. My page will need to have an accordion. My Region Template will push out raw HTML, and I will use jQuery to put accordion behavior on top. However, the jQuery will run at "onload", $(document).ready(function()), to initialize my raw HTML to be an accordion. It works fine in view mode, however when I switch to Contribution mode, the page shows a raw HTML.
I am looking for a hook that I can run JavaScript when switching between Consumption mode and Contribution mode. This way, I can put my initialization script in that hook. I have looked in the iDoc documentation but couldn't find any.
I would be grateful if you can help me out. Thank you very much for your time.
Linh
Edited by: 942214 on 22-Jun-2012 00:20Are you sure your jquery isn't getting called? Switching between contribution mode should cause a full page refresh by triggering the WCM.ReloadURL js function.
Have you put in debug statements to ensure that the $(document).ready(function(){}); really isn't being called?
-ryan -
Difference between ECC 6.0 and earlier versions
Hi,
one of the difference between ECC 6.0 and earlier versions is that instead 'WS_UPLOAD' and 'WS_DOWNLOAD' in ECC we should use 'GUI_UPLOAD' and 'GUI_DOWNLOAD' respectively.
(of course SPDD and SPRO tcodes is known by everone i suppose)
Similarly can u all put down some differences here, atleast one entry by each, I think we can make a good docu. I have searched the net for the differences but could not get much, so by each of us contributing one each, it would become good docu..for all of us.
Thanx in advanceUnicode Errors Encountered and their Solutions
E1. In u201CTEXT MODEu201D the u201CENCODINGu201D addition must be specified.
Error:
OPEN DATASET FILE FOR OUTPUT IN TEXT MODE.
Solution:
OPEN DATASET FILE FOR OUTPUT IN LEGACY TEXT MODE.
E2. In Unicode, DESCRIBE DISTANCE can only be used with the IN BYTE MODE or IN
CHARACTER MODE addition.
Error:
DESCRIBE DISTANCE BETWEEN T_KOMK AND T_KOMK-HIEBO01 INTO BPOS.
Solution:
DESCRIBE DISTANCE BETWEEN T_KOMK AND T_KOMK-HIENR01 INTO BPOS
IN CHARACTER MODE.
E3. u201CUSR02-UFLAGu201D must be a byte-type field (Typ X or XSTRING )
Error:
IF USR02-UFLAG O YULOCK.
Solution: Since the data type of USR02-UFLAG is type INT and is compared with data type
X u2013 Hence the error. So we define a new variable ZULOCK and assign the
value of USR02-UFLAG to ZULOCK.
New variable
DATA: ZULOCK(1) TYPE X. "APBRP00
Assign value
ZULOCK = USR02-UFLAG.
Compare -
IF ZULOCK = YULOCK. u201Creplace IF USR02-UFLAG O YULOCK.
E4. HT cannot be converted to a Character type field
Error :
WRITE ht TO t_data+10(2).
Solution : Since the data type of ht is a type u2018Xu2019 and the data is been transfer to
t_data which has a data type u2018Cu2019. value of one data type cannot be copy to
another data type where one of them is type string .Hence the error occur,
so the data type of ht is been change to Type u2018Cu2019
OR
A Tab ( value 09 ) is introduced as part of the row. The value 09 is not converted in Unicode environment. Instead we need to use class
Error:
DATA: BEGIN OF ht,
x(1) TYPE x VALUE '09',
END OF ht.
Solution:
Define Class after the Tables definition.
CLASS cl_abap_char_utilities DEFINITION LOAD.
Data Defination : Comment internal table HT and define a variable HT type C.
* Insert + APRIA00 05/02/2007 Unicode project
* DATA: BEGIN OF ht,
* x(1) TYPE x VALUE '09'
* END OF ht.
* Insert - APRIA00 05/02/2007 Unicode project
DATA HT type C.
Before using HT assign Horizontal tab.
Ht = CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB.
E5. In Unicode programs the u201C#u201D cannot appear in names, as it is does here in the name u201C#LINESu201D
Error :
#LINES TYPE I,
Solution : Since the # is used in the start of name, it is not allowed. We need to
remove it.
Solution for the above
V_LINES TYPE I,
E6. In u201CTEXT MODEu201D the u201CENCODINGu201D addition must be specified as well as the addition was required FOR OUTPUT,FOR INPUT, FOR APPENDING OR FOR UPDATE was expected.
Error:
OPEN DATASET PATH_NAME IN TEXT MODE.
Solution:
Download = OPEN DATASET PATH_NAME FOR OUTPUT IN LEGACY TEXT MODE.
Upload = OPEN DATASET AUSZUG-FILE IN TEXT MODE FOR INPUT ENCODING DEFAULT.
E7. u201CTABu201D must be a character-type data object( data type C,N, D, T or String). Field string)
Error:
data: begin of tab, "Excel Parameter Split at TAB
t type x value '09', "Tabulator
end of tab.
concatenate 'Material' 'Package Status'
into z_download-line separated by tab.
( In the above command the two field are to be separated with a horizontal Tab. The earlier way of assigning the tab value u201809u2019 will not work in Unicode environment.
Solution:
Define a class just after the Table defination.
CLASS cl_abap_char_utilities DEFINITION LOAD.
Define variable Tab as shown below :
Data : TAB TYPE C.
Before the concatenate statement assign the value of Tab using pre-defined attributes.
TAB = CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB.
E8. Upload/Ws_Upload and Download/Ws_Download are obsolete, since they are not Unicode-
enabled; use the class cl_gui_frontend_services
Error-1: Function WS_DOWNLOAD is obsolete in Unicode environment.
call function 'WS_DOWNLOAD'
exporting
filename = zfilename
tables
data_tab = z_download.
Solutions-1: Instead of WS_DOWNLOAD use GUI_DOWNLOAD.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
* BIN_FILESIZE =
FILENAME = zfilename
TABLES
DATA_TAB = z_download.
E9. The "/" character is reserved for identification of namespaces. It must be entered twice.
The name of a namespace must be at least 3 characters long.
Error :
U/N(3) TYPE C, "U/N --> ERSETZT DURCH SPACE
Solution :
* Special character can not be used to define a data variable
* U/N(3) TYPE C, "U/N --> ERSETZT DURCH SPACE
U_N(3) TYPE C, "U/N --> ERSETZT DURCH SPACE
* Insert - APSUS02 07/02/2007 Unicode Project
E10. "LP_TAB" and "CS_TAB" are not mutually convertible. In Unicode programs,
"LP_TAB" must have the same structure layout as "CS_TAB", independent of the length
of a Unicode character.
Error : This error is encountered when data from one internal table is copied to another
internal table which different structure. In this case its LP_TAB & CS_TAB.
LP_TAB[] = CS_TAB[].
Solution :
* Replace + APSUS02 07/02/2007 Unicode Project
* LP_TAB[] = CS_TAB[].
move-corresponding CS_TAB to LP_TAB.
* Replace + APSUS02 07/02/2007 Unicode Project
E11. Could not specify the access range automatically. This means that you need a RANGE
addition.
Error : Range need to be specified as an addition to the command.
DO 4 TIMES VARYING HELP_CHAR FROM ABCD(1) NEXT ABCD+1(1).
Solution :
DO 4 TIMES VARYING HELP_CHAR FROM ABCD(1) NEXT ABCD+1(1)
* Insert + APSUS02 07/02/2007 Unicode Project.
RANGE ABCD+0(4).
* Insert - APSUS02 07/02/2007 Unicode Project.
E12 . Processing Terminated Error code: Error in opening /
Path not found when downloading to Unix directory.
Error : PARAMETER: outfile(92) DEFAULT
'/CP/interface/NPP/data/MX/cbslaprcpts'
LOWER CASE,
kmxmstrd AS CHECKBOX.
This error is encountered when the path is missing. The above path is related to CCP.
Solution: For testing purpose comment the original path and replace it with
/CP/interface/CCD/Unicode_test/
E13. Upload/Ws_Upload and Download/Ws_Download are obsolete, since they are not Unicode- enabled; use the class cl_gui_frontend_services
Error: Function WS_UPLOAD is obsolete in Unicode environment. (During UCCHECK)
Call function 'WS_UPLOAD'
Exporting
Filename = zfilename
Filetype = u2018DATu2019
Tables
data_tab = z_upload
Exceptions
Conversion_error = 1
file_open_error = 2
file_read_error = 3
invalid_table_width = 4
invalid_type = 5
no_batch = 6
unknown_error = 7
gui_refuse_filetransfer = 8
others = 9.
Solution: Instead of WS_UPLOAD use TEXT_CONVERT_XLS_TO_SAP. Do not use temporary file put the file name as it is.
1) First define a type pool and a variable of type truxs_t_text_data.
TYPE-POOLS: truxs.
DATA: it_raw TYPE truxs_t_text_data.
2) Use this it_raw in the function module in parameter i_tab_raw_data. Put file name and the internal table in the function module.
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
EXPORTING
* I_FIELD_SEPERATOR =
* i_line_header = ' '
i_tab_raw_data = it_raw " WORK TABLE
i_filename = zfilename
TABLES
i_tab_converted_data = z_upload[] "ACTUAL DATA
EXCEPTIONS
conversion_failed = 1
OTHERS = 2.
Comment u201Ci_line headeru201D. It takes the first/ header line of the file which is to be uploaded.
Put square brackets after internal table as shown above.
E14. CURSORHOLD may not be converted into a number.
Error: GET CURSOR LINE CURSORHOLD VALUE CURSOR_HOLD.
Solution: In the declaration part of CURSORHOLD, one field is of u2018Pu2019 type and one field is of u2018Iu2019 type, which is not allowed in Unicode environment.So change the the type of it to NUMC. -
What is difference between 4.6c version and 4.7ee version
Hello to all,
Pls, help me.
what is difference between 4.6c version and 4.7ee version?
It is urgent tommorow I have an interview.
thanks & regards,
raju.Hi
Check these links
You can find the difference in release notes of each SAP version.
Here are the links.
http://help.sap.com/saphelp_47x200/helpdata/en/fc/e3003deddfae4de10000000a114084/frameset.htm
http://help.sap.com/saphelp_scm50/helpdata/en/28/b34c40cc538437e10000000a155106/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/43/68805bb88f297ee10000000a422035/frameset.htm
Please visit the following links:
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prespective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
One major difference is that 4.6 runs on what they call the basis layer, in 4.7 the basis layer was majorly modified to include new web technologies, hence the renaming of Basis to Web Application Server. 4.7 runs on the Web Application Server 6.20. With this, was the introduction to BSPs or Business Server Pages.
Also have a look at the link:
http://www.thespot4sap.com/Articles/SAP_Enterprise_4point7.pdf
Here is a quick short list though:- Statements for character processing have additions IN BYTE MODE and IN CHARACTER MODE, this affects statements like DESCRIBE LENGTH, OPEN DATASET
Header lines should not longer be used for tables (in OO context this is not even possible)
TABLES statement in reports should no longer be used
PNPCE for concurrent employement (new logical DB for HR)
For OO abap there a plenty of short forms for method calls that were not previously available.
One very cool feature is that data reference's can have actual data types and van be referenced directly without field symbols.
Additions to many abap statements, for example there is now a ALL OCCURENCES addition to the replace statement.
Class based exceptions are now available (although it is debatable how usefull these are seeing as there is no FINALLY part to the try catch statement, very disappointing but maybe that is just me).
Friends have been introduced for OO abap.
Dynamic program has plenty of improvements, for example there is now a TYPE TABLE OF variant for create data which lets you dynamically create an internal table with a structure type, your can also now call a class constructor with different importing parameters dynamically.
Regards
Kiran -
Can someone explain what recovery mode and dfu mode are?
title says it all.
The main difference between DFU mode and Recovery mode is the iBoot bootloader. iBoot tells the iPhone/iPod touch/iPad what to do when it turns on, eg. load up iOS version whatever (for me, still 4.2.6 on my Verizon iPhone). When you upgrade your device's firmware, it goes into recovery mode.That way, iBoot can make sure you're flashing into a firmware that's equal to or greater than the current version of firmware you have installed. When you enter DFU mode, there isn't this limitation, so you can flash any version of iPhone OS/iOS that you want, provided the device is compatible with it and Apple is still signing for it.
If this answered your question, tell me. If it didn't, well, tell me and I'll add more!
Hope I helped!
--CS -
Difference between Invoice created date and billing date.
Hi Gurus,
I opened the Billing Document in display mode(T.Code:VF03).In header data I found two tabs one is Created On and another one is Billing Date. Here in the billing document the both dates were different.
Please let me know the difference between Created On date and Billing Date.
your afforts are highly appriciated.
JYothi.Dear Jyothisd,
Invoice created date : Invoice created date is nothing but the date on which you have created the invoice.
Billingdate:Billing date is the date on which you suppose to do the billing for respective customer. Tease billing dates will be proposed to invoice from sales order if it is order related or else actual goods issue date is proposed to billing document as a Billing date if particular billing document is delivery related.
If you want you can change the Actual billing date the result is invoice created date.
Please revert if you want any further clarifications
Thanks&Regards
Maybe you are looking for
-
AP Invoice and AP Credit Memo Reconciliation
HI Expert, I just want to ask if there's a way to automate reconciliation of AP Invoice and AP Credit Memo related to each other? What I did was just open the AP invoice and i copied to AP Credit Memo. I assumed that this was automatically reconciled
-
I have multiple devices among several different family members. I have one iCloud account, I guess that seems to send messages, notifications, game requests meant to me but each device receives it. How can I fix this? jimmie57
-
How can I extend an Airport Express in WLAN mode with an additional Airport Express box
I'm trying to extend the existing WLAN with an additonal Airport Express box. I read through a bunch of comment throughout the communities here but didn't find what I'm looking for. My actual Installation consists: A Time Capsule attached to the Inte
-
Hi, I want to know the Ramdom Access Memory of my computer in a java program.
-
HR-abap friends--reg:SO10 Objects
Hello Friends, i am preparing SO10 objects like appointment letters and promotion letters, here some fields like basic salary means &basic& if coded like its coming i am just confusing how its coming, same way i need syntax for some other fileds hous