Difference between a new MBP fully loaded and an IMAC top of the line

need mobility.
might just mean local moving episodically
want the faster ( better ) machine
will use my 23 inch display with the MBP.
does any one have an idea which would be faster and able to handle photoshop CS3 GB3( maxing it ) better.
specs dont always mean everything
thanks

Usually, a desktop CPU, video card and counter part will always out perform it's mobile sister and in this case there's no difference.
The question you should be asking is Mobility a requirement??

Similar Messages

Is there any difference between R/3 4.7 version and ECC 5.0????

Hi All,
Is there any difference between R/3 4.7 version and ECC 5.0 for the transaction RSA5.
Regards,
Andy

Andy
Functionality wise I didn't see any difference other than new datasources in ECC5.0
Thnaks
Sat

Hi Friends what are the actual differences between AT NEW & ON CHANGE

what are the actual differences between AT NEW & ON CHANGE ? can you list some of the differences?

Hi,
At New
1. When a new record comes at new triggers. Atnew only used inside loop and endloop.
2. At new is controlbreak statment on at new the left side field change, the event
trigers and the values become 0 and *
On Change
1. On change of works same like at-new but the diff is it can be used out side of a loop,like select and endselect,case endcase.
2.. on change of is not a control break statement and we can use onchange of out side the loop
and
The Major difference between the two is that AT NEW can be used ONLY for INTERNAL TABLES, while ON CHANGE OF can be used for any loop processing i.e do..enddo, while..endwhile and loop..endloop also.
AT NEW <field>
The block will be executed when the SY-TABIX is 1 (or) when the SY-TABIX 1 value has a change with the SY-TABIX value.
With this block the field towards the right to the field are not accessable with in the block, and are shown with '*'. They can be accessed outside the block.
ON CHANGE OF <itab>-<field>
The block also works similar to the AT First. In this block all the fields are accesseble.
ON CHANGE OF triggers whenever there is a change in that particular field.
AT NEW triggers whenever there is a change in the fields before that particular field.ie. if there is a change in that combinations from the first field.
On change off' works on variabels. The 1st time the statement isreached a memory copy is made of the value. The next time the statementis reached, the current value is compared to the stored value. If thereis a difference, the coding between ON... and ENDON. is executed. Youcan use this for a table workarea field, but if you have the table loopin a routine and the routine called several times, you can get unwantedresults. (Check the value of the last loop with the value of the firstnew loop.)
The AT NEW (and others like AT END OF...) are specially for table loopprocessing. The coding between AT new FIELD and ANDAT is triggerdwhenever a the field or any field defined to the left is changed. Yourtable should be sorted by all fields from the left up to the consideredFIELD. Btw all fields to the right contain *, so it can be usefull tohave a second workarea filled to be printed or what ever you want.
REWARD IF HELPFUL
RAAM

What is the difference between these two reports MC.1 and MB5L

Hi
what is the difference between these two reports MC.1 and MB5L?
what is the Purpose of each report?
Material ledger is activated for this plant, we found some amount difference between these two reports, my client accounting department used to compare these two reports while year end/month end closing
Thanks
Raju

MC.1 will give you the report for plant analysis as per plant .
MB5L report will give you list of stock value as per G/L account wise.

Fully loaded and rendered external SWF printing problem.

I have an application that loads external SWF files that I have not built and do not have the codebase for.
I need to know when these SWFs are fully loaded and have rendered themselves on the screen.
Even gone to the point of giving them 80 enter frame events before trying to print and they show up on the paper sporadically.
Does anyone know if there's some standard event coming from some object internal to SWFLoader that would let me know when the SWF is "running?"

There is no way to know in the general case. If it had an animation of
birds flying around on it, when would be the right time to print it?

What is the Difference between ? new Operator and Class.forName() ???

plz tel me ....
what is the Difference between ? new Operator and Class.forName() ??? ........

Class.forName(), takes the class name as parameter,
and loads that class in memory. But it doesn't create
any instance of that class.
That means static methods/variables are available for
use.
new keyword, checks if the class is loaded, if not
then loads that class, and then creates an instance
of that class.Class.forName actually returns the class object for that name (class - for -name). it might load it, if the class hasn't already been loaded, but it's misleading to say that's what that method does
your definition of 'new' is wrong, too. give the dukes back

Difference between At-new and on change of

Hi,
Can anyone send me the exact difference between At-new and On change of
Thank You
Santosh

Hi anjali,
I just entered your subject "difference between At-new and on change of" as search terms in the SEARCH FORUM input field.
Please check the results and come back after.
Difference between At new and On change of?
Posted on: 28.09.2006 19:01, by user: subhash soni -- Relevance: 100% -- Show all results within this thread
Hi What is the difference between At new and On change of? Thank You
difference between At-new and on change of
Posted on: 09.03.2007 20:16, by user: anjali nalluri -- Relevance: 89% -- Show all results within this thread
Hi, Can anyone send me the exact difference between At-new and On change of Thank You Santosh
Diff between AT new and on change of
Posted on: 30.11.2006 16:06, by user: Pavan Ravikanti -- Relevance: 53% -- Show all results within this thread
hi, can any one tell me what is the exact difference between AT new and on change of thanks pavan ...
Diff. between At New and On Change Of
Posted on: 05.10.2005 08:58, by user: surya mamtha -- Relevance: 48% -- Show all results within this thread
Hi, Could anybody exlain the difference between At New event and On Change Of event in detail? And how can we avoid the inner loops ...
Major Diff. Between On change of and At New
Posted on: 24.05.2006 12:48, by user: IFF -- Relevance: 46% -- Show all results within this thread
Hi Experts, Could you please let me know that what is the major difference between the control break statements On change of and At new. Which one is best to used ...
diff between at new and on change of
Posted on: 08.03.2007 16:27, by user: saroja ponnam -- Relevance: 44% -- Show all results within this thread
Hi all, what is the main diff between at new and on change of statements. Regards Saroja.
Differnce between AT NEW AND ON CHANGE OF
Posted on: 06.05.2006 10:55, by user: Raja Sekhar T -- Relevance: 44% -- Show all results within this thread
Hi, Differnce between AT NEW AND ON CHANGE OF Iam waiting foryour reply Thanks & Regards Raja Sekhar.T ...
Regards,
Clemens

Difference between At new and on change statement?

What is the difference between at new and on change statement? Please explain with an example.

hi
on change of differs from at new in the following respects:
It can be used in any loop construct, not just loop at. For example, it can be used within select and endselect, do and enddo, or while and endwhile, as well as inside get events.
A single on change of can be triggered by a change within one or more fields named after of and separated by or. These fields can be elementary fields or field strings. If you are within a loop, these fields do not have to belong to the loop.
When used within a loop, a change in a field to the left of the control level does not trigger a control break.
When used within a loop, fields to the right still contain their original values; they are not changed to contain zeros or asterisks.
You can use else between on change of and endon.
You can use it with loop at it where . . ..
You can use sum with on change of. It sums all numeric fields except the one(s) named after of.
Any values changed within on change of remain changed after endon. The contents of the header line are not restored as they are for at and endat.
REGARDS
PRASANTH

Difference between AT NEW and ON CHANGE

difference between AT NEW and ON CHANGE

HI,
at new is controlbreak statment and on change of is not and we can use onchange of out side the loop
and on at nnwe the left side feild change the event
trigers and the values become 0 and *
-->1.It can be used in any loop construct, not just loop at.
For example, it can be used within select and endselect, do
and enddo, or while and endwhile, as well as inside get events.
2. A single on change of can be triggered by a change within
one or more fields named after of and separated by or. These
fields can be elementary fields or field strings. If you are
within a loop, these fields do not have to belong to the loop.
3.When used within a loop, a change in a field to the left
of the control level does not trigger a control break.
4.When used within a loop, fields to the right still contain
their original values; they are not changed to contain zeros
or asterisks.
5.You can use else between on change of and endon.
6.You can use it with loop at it where . . ..
7. You can use sum with on change of. It sums all numeric
fields except the one(s) named after of.
8.Any values changed within on change of remain changed
after endon. The contents of the header line are not
restored as they are for at and endat
regards,
vineela.

Difference between AT NEW ..... and ON CHANGE events

difference between AT NEW and ON Change events..
Thanks

Hi
AT NEW
|{END OF} comp
Beginning or end of a group of lines with the same content in the component comp1 comp2 ... and in the components to the left of comp1 comp2 .... The components comp1 comp2 ... can be specified, as described in the section Specification of Components, with the limitation that access to object attributes is not possible here.
ON CHANGE OF
ON CHANGE OF dobj [OR dobj1 [OR dobj2] ... ].
statement_block
ENDON.
The statements ON CHANGE OF and ENDON, which are forbidden in classes, define a control structure that can contain a statement block statement_block. After ON CHANGE OF, any number of data objects dobj1, dobj2... of any data type can be added, linked by OR.
The first time a statement ON CHANGE OF is executed, the statement block is executed if at least one of the specified data objects is not initial. The statement block is executed for each additional execution of the same statement ON CHANGE OF, if the content of one of the specified data objects has been changed since the last time the statement ON CHANGE OF was executed.
For each time the statement ON CHANGE OF is executed, the content of all the specified data objects is saved as an auxiliary variable internally in the global system. The auxiliary variable is linked to this statement and cannot be accessed in the program. The auxiliary variables and their contents are retained longer than the lifetime of procedures. An auxiliary variable of this type can only be initialized if its statement ON CHANGE OF is executed while the associated data object is initial.
This control structure, which is forbidden in classes, is particularly prone to errors and should be replaced by branches with explicitly declared auxiliary variables.
example:-
Using AT FIRST , AT NEW, AT THE END OF , AT LAST.
DATA: BEGIN OF ITAB OCCURS 0,
 F1 TYPE I,
 F2(6) TYPE C,
 F3(10) TYPE N,
 F4(16) TYPE P DECIMALS 2,
 END OF ITAB.
DATA: SUB_TOT(10) TYPE P DECIMALS 3.
**--1
ITAB-F1 = 1.
ITAB-F2 = 'ONE'.
ITAB-F3 = 10.
ITAB-F4 = '1000.00'.
APPEND ITAB.
CLEAR ITAB.
ITAB-F1 = 1.
ITAB-F2 = 'ONE'.
ITAB-F3 = 20.
ITAB-F4 = '2000.00'.
APPEND ITAB.
CLEAR ITAB.
ITAB-F1 = 1.
ITAB-F2 = 'ONE'.
ITAB-F3 = 30.
ITAB-F4 = '3000.00'.
APPEND ITAB.
CLEAR ITAB.
*--2
ITAB-F1 = 2.
ITAB-F2 = 'TWO'.
ITAB-F3 = 10.
ITAB-F4 = '1000.00'.
APPEND ITAB.
CLEAR ITAB.
ITAB-F1 = 2.
ITAB-F2 = 'TWO'.
ITAB-F3 = 20.
ITAB-F4 = '2000.00'.
APPEND ITAB.
CLEAR ITAB.
*-- 3
ITAB-F1 = 3.
ITAB-F2 = 'THREE'.
ITAB-F3 = 10.
ITAB-F4 = '1000.00'.
APPEND ITAB.
CLEAR ITAB.
ITAB-F1 = 3.
ITAB-F2 = 'THREE'.
ITAB-F3 = 20.
ITAB-F4 = '2000.00'.
APPEND ITAB.
CLEAR ITAB.
SORT ITAB BY F1.
LOOP AT ITAB.
AT FIRST.
WRITE: /35 ' MATERIAL DETAILS:'.
ULINE.
ENDAT.
AT NEW F1.
WRITE: / 'DETAILS OF MATERIAL:' COLOR 7 , ITAB-F1.
ULINE.
ENDAT.
WRITE: / ITAB-F1, ITAB-F2, ITAB-F3, ITAB-F4.
SUB_TOT = SUB_TOT + ITAB-F4.
AT END OF F1.
ULINE.
WRITE: / 'SUB TOTAL :' COLOR 3 INVERSE ON, SUB_TOT COLOR 3 INVERSE ON.
CLEAR SUB_TOT.
ENDAT.
AT LAST.
SUM.
ULINE.
WRITE: 'SUM:', ITAB-F4.
ULINE.
ENDAT.
ENDLOOP.

DIFFERENCE BETWEEN "AT NEW " AND "AT FIRST" , "AT END OF" AND "AT LAST" ?

WHAT IS THE DIFFERENCE BETWEEN "AT NEW " AND "AT FIRST" , "AT END OF" AND "AT LAST" WITH REFERENCE TO CONTROL BREAK STATEMENTS ? PLEASE EXPLAIN IN DETAIL.
BEST REGARDS
RYAN.

Hi
i am sending you a simple program in which i had write program on that events
you can understand very easily
Using AT FIRST , AT NEW, AT THE END OF , AT LAST.
DATA: BEGIN OF ITAB OCCURS 0,
 F1 TYPE I,
 F2(6) TYPE C,
 F3(10) TYPE N,
 F4(16) TYPE P DECIMALS 2,
 END OF ITAB.
DATA: SUB_TOT(10) TYPE P DECIMALS 3.
**--1
ITAB-F1 = 1.
ITAB-F2 = 'ONE'.
ITAB-F3 = 10.
ITAB-F4 = '1000.00'.
APPEND ITAB.
CLEAR ITAB.
ITAB-F1 = 1.
ITAB-F2 = 'ONE'.
ITAB-F3 = 20.
ITAB-F4 = '2000.00'.
APPEND ITAB.
CLEAR ITAB.
ITAB-F1 = 1.
ITAB-F2 = 'ONE'.
ITAB-F3 = 30.
ITAB-F4 = '3000.00'.
APPEND ITAB.
CLEAR ITAB.
*--2
ITAB-F1 = 2.
ITAB-F2 = 'TWO'.
ITAB-F3 = 10.
ITAB-F4 = '1000.00'.
APPEND ITAB.
CLEAR ITAB.
ITAB-F1 = 2.
ITAB-F2 = 'TWO'.
ITAB-F3 = 20.
ITAB-F4 = '2000.00'.
APPEND ITAB.
CLEAR ITAB.
*-- 3
ITAB-F1 = 3.
ITAB-F2 = 'THREE'.
ITAB-F3 = 10.
ITAB-F4 = '1000.00'.
APPEND ITAB.
CLEAR ITAB.
ITAB-F1 = 3.
ITAB-F2 = 'THREE'.
ITAB-F3 = 20.
ITAB-F4 = '2000.00'.
APPEND ITAB.
CLEAR ITAB.
SORT ITAB BY F1.
LOOP AT ITAB.
AT FIRST.
WRITE: /35 ' MATERIAL DETAILS:'.
ULINE.
ENDAT.
AT NEW F1.
WRITE: / 'DETAILS OF MATERIAL:' COLOR 7 , ITAB-F1.
ULINE.
ENDAT.
WRITE: / ITAB-F1, ITAB-F2, ITAB-F3, ITAB-F4.
SUB_TOT = SUB_TOT + ITAB-F4.
AT END OF F1.
ULINE.
WRITE: / 'SUB TOTAL :' COLOR 3 INVERSE ON, SUB_TOT COLOR 3 INVERSE ON.
CLEAR SUB_TOT.
ENDAT.
AT LAST.
SUM.
ULINE.
WRITE: 'SUM:', ITAB-F4.
ULINE.
ENDAT.
ENDLOOP.
Using AT FIRST , AT NEW, AT THE END OF , AT LAST.
DATA: BEGIN OF ITAB OCCURS 0,
 F1 TYPE I,
 F2(6) TYPE C,
 F3(10) TYPE N,
 F4(16) TYPE P DECIMALS 2,
 END OF ITAB.
DATA: SUB_TOT(10) TYPE P DECIMALS 3.
**--1
ITAB-F1 = 1.
ITAB-F2 = 'ONE'.
ITAB-F3 = 10.
ITAB-F4 = '1000.00'.
APPEND ITAB.
CLEAR ITAB.
ITAB-F1 = 1.
ITAB-F2 = 'ONE'.
ITAB-F3 = 20.
ITAB-F4 = '2000.00'.
APPEND ITAB.
CLEAR ITAB.
ITAB-F1 = 1.
ITAB-F2 = 'ONE'.
ITAB-F3 = 30.
ITAB-F4 = '3000.00'.
APPEND ITAB.
CLEAR ITAB.
*--2
ITAB-F1 = 2.
ITAB-F2 = 'TWO'.
ITAB-F3 = 10.
ITAB-F4 = '1000.00'.
APPEND ITAB.
CLEAR ITAB.
ITAB-F1 = 2.
ITAB-F2 = 'TWO'.
ITAB-F3 = 20.
ITAB-F4 = '2000.00'.
APPEND ITAB.
CLEAR ITAB.
*-- 3
ITAB-F1 = 3.
ITAB-F2 = 'THREE'.
ITAB-F3 = 10.
ITAB-F4 = '1000.00'.
APPEND ITAB.
CLEAR ITAB.
ITAB-F1 = 3.
ITAB-F2 = 'THREE'.
ITAB-F3 = 20.
ITAB-F4 = '2000.00'.
APPEND ITAB.
CLEAR ITAB.
SORT ITAB BY F1.
LOOP AT ITAB.
AT FIRST.
WRITE: /35 ' MATERIAL DETAILS:'.
ULINE.
ENDAT.
AT NEW F1.
WRITE: / 'DETAILS OF MATERIAL:' COLOR 7 , ITAB-F1.
ULINE.
ENDAT.
WRITE: / ITAB-F1, ITAB-F2, ITAB-F3, ITAB-F4.
SUB_TOT = SUB_TOT + ITAB-F4.
AT END OF F1.
ULINE.
WRITE: / 'SUB TOTAL :' COLOR 3 INVERSE ON, SUB_TOT COLOR 3 INVERSE ON.
CLEAR SUB_TOT.
ENDAT.
AT LAST.
SUM.
ULINE.
WRITE: 'SUM:', ITAB-F4.
ULINE.
ENDAT.
ENDLOOP.
Reward if usefull

Difference between using new Date() and new Date(System.currentTimeMillis()

Hi All,
I have seen many open source api's where they are updating dates with the following code
new Date(System.currentTimeMillis())
when i print the new Date() it prints the same
what is the difference between using new Date() and new Date(System.currentTimeMillis()) ??
Thanks,
J.Kathir

when i print the new Date() it prints the same
It does because of backward compatability. This constructor exists in version 1.3.1 but not in newer versions.Really ? Please point me to where you read that.
API doc 1.5 : new Date() (still there, not even deprecated)
A quick look at the code for this constructor: /**
 * Allocates a <code>Date</code> object and initializes it so that
 * it represents the time at which it was allocated, measured to the
 * nearest millisecond.
 * @see java.lang.System#currentTimeMillis()
 public Date() {
 this(System.currentTimeMillis());
 }

What is the difference between on new focus and do prepare out put methods

Hi,
what is the difference between on new focus and do prepare out put methods.

Hi Divya,
DO_PREPARE_OUTPUT method is triggered each time the view is prepared after each event. Normally we redefine this method in order default the initial values based upon the parameter iv_first_time = 'X'. There can be certain other scenarios like putting data validations where this method can be helpful.
For details on ON_NEW_FOCUS, refer to this [thread|on_new_focus event;
Thanks
Vishal

What is the difference between credit memo in invoice year and in next year

Hi!
I'm new here.I'm study SAP ERP.I don't know what is the difference between credit memo in invoice year and credit memo in next year (asset accounting).Can you show and give me an example, please!
Thanks and best regards!
Edited by: dinhtuan on Jun 28, 2010 3:10 PM

Hi,
Maybe have a look at the SAP Help for further information (http://help.sap.com) : e.g. 'Posting Credit Memos Integrated with Vendor' or 'Posting a Credit Memo Offset Against a Clearing Account'
Transaction type 105 for credit memo on current acquisition made in the current year, posting key 75. Or transaction type 160 for credit memo on acquisitions from prior years. posting key 75.
Note: determine if the asset was acquired in the current fiscal year or in a closed fiscal year (Display asset values).
If the asset was acquired in a fiscal year that is now closed, correct the past depreciation using a write-up (in that case check out and refer to Posting Write-Ups).
I hope this helps.
Kind regards,
Brigitte

Difference between Oracle9i 9.2.0.3 and Oracle9i 9.2.0.4 JDBC Drivers

Hi everybody,
Can you tell me what is Difference between Oracle9i 9.2.0.3 and Oracle9i 9.2.0.4 JDBC Drivers briefly?
In my application I am using Oracle9i 9.2.0.3 JDBC Drivers. But it is not supported when I retrieved Data with junk character from CLOB.because of IO Exception it showing Bigger type length than Maximum
if i used Oracle9i 9.2.0.4 JDBC Drivers it is working properly.
I am using WAS 4.0.3 , JDK1.3 and Oracle 9.0.
Shall I use Oracle9i 9.2.0.4 in my application and I want to know it will create any new problem in my application or not ?
please Reply me ASAP.
i am waiting for your reply
thanks a lot
bye
Message was edited by:
paulusazapakcom

Can you tell me what is Difference between Oracle9i
9.2.0.3 and Oracle9i 9.2.0.4 JDBC Drivers briefly?Search the Oracle site. That should tell if there are any differences at all. I would assume that there would be some bug fixes.
please Reply me ASAP.
i am waiting for your replySuch lines are better avoided.

Difference between a new MBP fully loaded and an IMAC top of the line

Similar Messages

Maybe you are looking for