Difference between a partition and index

In BW how does an index differ from a partition? Thanks

Hi,
Partitioning works on the Binary Search functionality.The data is divided into parts and stored logically.Depending on the variable input the data is fetched intelligently through Data Mining concept.
For eg: if you have 120 records of Customer say 10 records per month and you have done a partition on 0CALMONTH.
So now the data will be stored in 12 sets of 10 each for a year data.Now depending upon your input say you put June month along with other selection then it will hit only the set for June month.So instead of searching for all over 120 records it will search only in that 1 set of 10 records.This improves query performance.
However, the restriction is that partitioning can be done only on time variable.
Whereas, Indexing works like the Primary Index or Key field of an R/3 table.
More the Index better the search and query performance.But again the flip side is it will complicate the design to provide Index on many fields and data loading time would be increased.Any changes and you would require to drop the index then reload and then again rebuild the Index.The number of Indexes to be used to improve query performance is a compromise between designs.
Hope this helps.

Similar Messages

What is the difference between Topic Keywords and Index File Keywords?

What is the difference between Topic Keywords and Index File Keywords? Any advantages to using one over the other? Do they appear differently in the generated index?
RH9.0.2.271
I'm using Webhelp

Hi there
When you create a RoboHelp project you end up with many different ancillary files that are used to store different bits of information. Many of these files bear the name you assigned to the project at the time you created it. The index file has the project name and it ends with a .HHK file extension. (HHK meaning HTML Help Keywords)
Generally, unless you change RoboHelp's settings, you add keywords to this file and associate topics to the keywords via the Index pod. At the time you compile a CHM or generate other types of output, the file is consulted and the index is built.
As I said earlier, the default is to add keywords to the Index file until you configure RoboHelp to add the keywords to the topics themselves. Once you change this, any keyword added will become a META tag in the topic code. If your keyword is BOFFO, the META tag would look like this:
<meta name="MS-HKWD" content="BOFFO" />
When the help is compiled or generated, the Index (.HHK) file is consulted as normal, but any topics containing keywords added in this manner are also added to the Index you end up with. From the appearance perspective, the end user woudn't know the difference or be able to tell. Heck, if all you ever did was interact with the Index pod, you, as an author wouldn't know either. Well, other than the fact that the icons appear differently.
Operationally, keywords added to the topics themselves may hold an advantage in that if you were to import these topics into other projects, the Index keywords would already be present.
Hopefully this helps... Rick

Difference between sy-tabix and sy-index?

tell me about sy-tabix and sy-index?what is the difference between sy-tabix and sy-index?
Moderator Message: Please search before posting. Read the [Forum Rules Of Engagement |https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement] for further details.
Edited by: Suhas Saha on Jun 18, 2011 5:33 PM

HI,
Here is a brief description of difference between SY_TABIX and SY_INDEX and using them with several conditions.
SY-TABIX
Current line of an internal table. SY-TABIX is set by the statements below, but only for index tables. The field is either not set or is set to 0 for hashed tables.
APPEND sets SY-TABIX to the index of the last line of the table, that is, it contains the overall number of entries in the table.
COLLECT sets SY-TABIX to the index of the existing or inserted line in the table. If the table has the type HASHED TABLE, SY-TABIX is set to 0.
LOOP AT sets SY-TABIX to the index of the current line at the beginning of each loop lass. At the end of the loop, SY-TABIX is reset to the value that it had before entering the loop. It is set to 0 if the table has the type HASHED TABLE.
READ TABLE sets SY-TABIX to the index of the table line read. If you use a binary search, and the system does not find a line, SY-TABIX contains the total number of lines, or one more than the total number of lines. SY-INDEX is undefined if a linear search fails to return an entry.
SEARCH <itab> FOR sets SY-TABIX to the index of the table line in which the search string is found.
SY-INDEX
In a DO or WHILE loop, SY-INDEX contains the number of loop passes including the current pass.
Hope this helps.
Thank you,
Pavan.

Disk Utilty - what is difference between single volume and single partition

In Disk Utility I can, should I wish, format a drive by using Erase to create a single volume. Also in Disk Utility, I have the option to use Partition to create one (or more) partition.
What is the difference between a volume and a single partition?
What are their relative merits?
In what circumstances would I want to create a single partition instead of a volume?
Disk Utility also prompts me to name the volume or partition. From experience, what would you suggest as a suitable name and where is this information subsequently used?

A "volume" or "partition" are the same thing. The subject of using partitions has been covered many times on the forums. Do some searching and you'll find quite a lot of information. Also try doing some Google searching.

Difference between open loop and closed loop mode when finding the index on a stepper motor axis.

I have a test system which uses a PXI-7352 motion controller with a MID-7602 stepper motor drive to position a 200 step/revolution stepper motor with an attached 1000 line encoder. The MID-7602 is configured for 64 microsteps per step, giving 12,800 microsteps and 4000 encoder counts per revolution. The system is controlled using LabView 7.1 and NI-Motion 6.13. To home the motor, I've defined a sequence in MAX which first finds the reverse limit switch and then moves forward to the encoder index pulse.
When finding its reference in open loop mode, the system its reference at the same microstep each time. When findings its reference in closed loop mode, the system finds its reference somewhere within about a 20 microstep wide range.
I hope somebody out there with more experience with this controller can describe the difference between finding the encoder index in open loop mode and finding the encoder index in closed loop mode.
Thanks,
Mark Moss

Hello Mark,
I suspect that the behavior you are experiencing has today
with the resolution difference between your encoder and your
microstepping. Let me illustrate with an
example:
Example Setup
Stepper
Motor
NI
Motion Controller
10
steps per encoder pulse (Every 10 steps the controller gets an encoder
pulse, therefore positions 0-9 all appear to be 0 to the controller)
The
system has a maximum of 3 pull in moves set
Open Loop Scenario
The
system is commanded to go to position 9.
The
controller sends out 9 pulses.
The
motor moves to position 9.
Closed Loop Scenario
The
system is commanded to go to position 9.
The
controller sends out 9 pulses.
The
motor moves to position 9.
The
controller checks its position and sees that it is still at position 0
because it has not received an encoder pulse.
Because
the controller thinks it is still at position 0, it sends another 9 pulses
as its first pull in move.
The
motor moves to position 18.
The
controller checks its position and sees that it is at position 10 because
it has only received one encoder pulse.
Because
the controller thinks it is still at position 10, it sends1 reverse pulse
as its second pull in move.
The
motor moves to position 17.
The
controller checks its position and sees that it is at position 10 because
it has only received one encoder pulse.
Because
the controller thinks it is still at position 10, it sends and additional
single reverse pulse as its third pull in move.
The
motor moves to its final position of 16.
I believe something similar is happening with your
application as it looks for the index pulse.
Because the controller does not compensate for what it perceives as
position error in open loop mode, the motor always goes to the same commanded
position. In closed loop mode, the motor
is bouncing around inside the single index encoder pulse trying to find a
certain position.
There are several recommendations I can make towards
correcting this behavior. These
recommendations are in order of effectiveness:
Setup
your system so that there are more encoder counts per revolution than
steps per revolution.
Turn
off pull-in moves by setting them to 0 in MAX.
Use an
open loop configuration.
Play
around with the pull in window in MAX.
Regards,
Luke H

Difference between primary key and primary index

Dear All,
Hi... .Could you pls tell me the difference between primary key and primary index.
Thanks...

Hi,
Primary Key : It is one which makes an entry of the field unique.No two distinct rows in a table can have the same value (or combination of values) in those columns.
Eg: first entry is 111, if you again enter value 111 , it doesnot allow 111 again. similarly for the strings or characters or numc etc. Remember that for char or numc or string 'NAME' is not equal to 'name'.
Primary Index: this is related to the performance .A database index is a data structure that improves the speed of operations in a table. Indices can be created using one or more columns, providing the basis for both rapid random lookups and efficient ordering of access to records. The disk space required to store the index is typically less than the storage of the table (since indices usually contain only the key-fields according to which the table is to be arranged, and excludes all the other details in the table), yielding the possibility to store indices into memory from tables that would not fit into it. In a relational database an index is a copy of part of a table. Some databases extend the power of indexing by allowing indices to be created on functions or expressions. For example, an index could be created on upper(last_name), which would only store the uppercase versions of the last_name field in the index.
In a database , we may have a large number of records. At the time of retrieving data from the database based on a condition , it is a burden to the db server. so whenever we create a primary key , a primary index is automatically created by the system.
If you want to maintain indices on other fields which are frequently used in where condition then you can create secondary indices.
Reward points if helpful.
Thanks,
Sirisha..

Difference between primary eindex and secondary index?

hi experts
pls answer me
difference between primary eindex and secondary index?
rewads apply.
thanks.
naresh.

hi,
check this link.
http://help.sap.com/saphelp_47x200/helpdata/en/cf/21eb2d446011d189700000e8322d00/frameset.htm
A difference is made between Primary & Secondary indexes to a table. the primary index consists of the key fields of the table and a pointer to the non-keys-fields of the table. The Primary index is generated automatically when a table is created and is created in the datebase as the same times as the table. It is also possible to define further indexes to a table in the ABAP/4 dictionary, which are then referred to as Secondary indexes.
Always it is not mandatory that an index should have all the key fields of a table. To see the index of a table
goto SE11->specify table name->click on the indexes... button on the application toolbar.
Based on your requirement you can you any of those index fields in the where clause of your query. Always its a better practice to use the index fields in the order specified. While selecting the records from a table it is always better to select the fields in the same order as specified in the table.

Difference between unique constraint and unique index

1. What is the difference between unique constraint and unique index when unique constraint is always indexed ? Which one is better in this case for better performance ?
2. Is Composite index of 3 columns x,y,z better
or having independent/ seperate indexes on 3 columns x,y,z is better for better performance ?
3. It has been very confusing for me to decide which columns to index, I have indexed most foreignkey columns, is it a good idea ? We do lot of selects and DMLS on most of our tables. Is there any query that I can run and find out if indexes are really being used and if they are improving any performance. I have analyzed and computed my indexes using ANALYZE index index_name validate structure and COMPUTE STATISTICS;
null

1. Unique index is part of unique constraint. Of course you can create standalone unique index. But is is no point to skip the logical view of business if you spend same effort to achive.
You create unique const. Oracle create the unique index for you. You may specify index characteristic in unique constraint.
2. Depends. You can't utilize the composite index if the searching condition is not whole or front part of the indexing key. You can't utilize your index if you query the table for y=2. That is.
3. As old words in database arena, Index may be good or bad for a table depending on the size of table, number of columns in the table... etc. It is very environmental dependent. In fact, It is part of database nomalization. Statistic is a way oracle use to determine the execution plan.
Steve
null

What is the difference between logical ROWID and physical ROWID

hello
can u please explain the difference between logical ROWID and physical ROWID
regards,

from the docs (a 30 sec search)
Physical rowids store the addresses of rows in ordinary tables (excluding index-organized tables), clustered tables, table partitions and subpartitions, indexes, and index partitions and subpartitions.
Logical rowids store the addresses of rows in index-organized tables.

Difference between v$option and dba_registry views ??

Hello all,
Whats the difference between v$option and dba_registry views.
SQL> select * from v$option ;
PARAMETER VALUE
Partitioning TRUE
Objects TRUE
Real Application Clusters FALSE
Advanced replication TRUE
Bit-mapped indexes TRUE
Parallel backup and recovery TRUE
Parallel execution TRUE
Parallel load TRUE
Point-in-time tablespace recovery TRUE
Fine-grained access control TRUE
Proxy authentication/authorization TRUE
...etc
47 rows selected
and
SQL> select comp_name from dba_registry;
Oracle9i Catalog Views
Oracle9i Packages and Types
2 rows selected.
Why the difference ??
TIA,
Jj
Message was edited by:
user566698
the DB is 9.2.0.7

DBA_REGISTRY displays information about the components loaded into the database
V$OPTION lists options that are installed with the Oracle server.
http://download-uk.oracle.com/docs/cd/B10501_01/server.920/a96536/toc.htm
Regards
Acr

What is difference between report programming and dialog programming?

hi,
what is difference between report programming and dialog programming? plz provide some example code
bye

ABAP programming
Basically reports are used to read database and represent the results in lists.
Reports are collections of processing blocks that the system calls depending on events.
We can use reports to evaluate data from database tables.
Reports are stand alone programs and controlled by events.
A report itself never creates events
steps in report:
Processing the selection screen
Reading the database
Evaluating the data and creating lists
Outputting a list.
1st u write simple logics, after that u can enhance the code as step by step.
http://venus.imp.mx/hilario/Libros/TeachYrslfAbap4/index.htm
http://help.sap.com/saphelp_47x200/helpdata/en/d1/802cfc454211d189710000e8322d00/frameset.htm
http://www.sapdev.co.uk/reporting/reportinghome.htm
Dialog Programming
Structure of a Dialog Program
A dialog program consists of the following basic components:
Screens (dynpros)
Each dialog in an SAP system is controlled by dynpros. A dynpro (DYnamic PROgram) consists of a screen and its flow logic and controls exactly one dialog step. The flow logic determines which processing takes place before displaying the screen (PBO-Process Before Output) and after receiving the entries the user made on the screen (PAI-Process After Input).
The screen layout fixed in the Screen Painter determines the positions of input/output fields, text fields, and graphical elements such as radio buttons and checkboxes. In addition, the Menu Painter allows to store menus, icons, pushbuttons, and function keys in one or more GUI statuses. Dynpros and GUI statuses refer to the ABAP/4 program that control the sequence of the dynpros and GUI statuses at runtime.
ABAP/4 module pool
Each dynpro refers to exactly one ABAP/4 dialog program. Such a dialog program is also called a module pool, since it consists of interactive modules. The flow logic of a dynpro contains calls of modules from the corresponding module pool. Interactive modules called at the PBO event are used to prepare the screen template in accordance to the context, for example by setting field contents or by suppressing fields from the display that are not needed. Interactive modules called at the PAI event are used to check the user input and to trigger appropriate dialog steps, such as the update task.
All dynpros to be called from within one transaction refer to a common module pool. The dynpros of a module pool are numbered. By default, the system stores for each dynpro the dynpro to be displayed next. This dynpro sequence or chain can be linear as well as cyclic. From within a dynpro chain, you can even call another dynpro chain and, after processing it, return to the original chain.
Check this link for basics.
http://sap.mis.cmich.edu/sap-abap/abap09/index.htm
Check this link for Dialog Programming/Table Control
http://www.planetsap.com/Tips_and_Tricks.htm#dialog
Check this SAP Help for Dialog Program doc.
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9cdc35c111d1829f0000e829fbfe/content.htm
Check this SAP Help link for Subscreens.
http://help.sap.com/saphelp_nw70/helpdata/en/9f/dbabfe35c111d1829f0000e829fbfe/content.htm
Check this link for subscreen demo program.
http://abapcode.blogspot.com/2007/05/demo-program-to-create-subscreen-in.html
Also check this link too.
http://abapcode.blogspot.com/2007/06/dialog-programming-faq.html
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9cdc35c111d1829f0000e829fbfe/frameset.htm
http://sap.mis.cmich.edu/sap-abap/abap09/sld004.htm
http://help.sap.com/saphelp_nw04/helpdata/en/52/670ba2439b11d1896f0000e8322d00/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/52/670c17439b11d1896f0000e8322d00/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/52/670c17439b11d1896f0000e8322d00/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9ccf35c111d1829f0000e829fbfe/frameset.htm
http://abapprogramming.blogspot.com/

Difference between Temp table and Variable table and which one is better performance wise?

Hello,
Anyone could you explain What is difference between Temp Table (#, ##) and Variable table (DECLARE @V TABLE (EMP_ID INT)) ?
Which one is recommended to use for better performance?
also Is it possible to create CLUSTER and NONCLUSTER Index on Variable table?
In my case: 1-2 days transactional data are more than 3-4 Millions. I tried using both # and table variable and found table variable is faster.
Is that Table variable using Memory or Disk space?
Thanks Shiven:) If Answer is Helpful, Please Vote

Check following link to see differences b/w TempTable & TableVariable: http://sqlwithmanoj.com/2010/05/15/temporary-tables-vs-table-variables/
TempTables & TableVariables both use memory & tempDB in similar manner, check this blog post: http://sqlwithmanoj.com/2010/07/20/table-variables-are-not-stored-in-memory-but-in-tempdb/
Performance wise if you are dealing with millions of records then TempTable is ideal, as you can create explicit indexes on top of them. But if there are less records then TableVariables are good suited.
On Tables Variable explicit index are not allowed, if you define a PK column, then a Clustered Index will be created automatically.
But it also depends upon specific scenarios you are dealing with , can you share it?
~manoj | email: http://scr.im/m22g
http://sqlwithmanoj.wordpress.com
MCCA 2011 | My FB Page

Difference between SQL Explain and SP Explain

What is the difference between SQL Explain and SP Explain? And why would they suggest a different index is being used for the same statement in the same trace?

Hi,
Go through the link,
http://www.redbooks.ibm.com/redbooks/pdfs/sg247094.pdf#search=%22SQL%20Explain%20and%20SP%20Explain%20in%20SAP%22
Regards,
Azaz.

Difference between abap object and function

hi all,
i read the book on abap object of the difference between abap object and classical abap.
i know that there is only 1 instance of a specific function group but somehow i still not so clear why subsequent vehicle cannot use the same function. i also can use the do and loop to call the function? if cannot then why?
hope can get the advice.
thanks
using function *********
function-pool vehicle.
data speed type i value 0.
function accelerate.
speed = speed + 1.
endfunction.
function show_speed.
write speed.
endfunction.
report xx.
start-of-selection.
*vehicle 1
call function 'accelerate'.
call function 'accelerate'.
call function 'show_speed'.
*vehicle 2
*vehicle 3
*****abap object*******
report xx.
data: ov type ref to vehicle,
         ov_tab type table of ref to vehicle.
start-of-selection.
do 5 times.
create object ov.
append ov to ov_tab.
enddo.
loop at ov_tab into ov.
do sy-tabix times.
call method ov->accelerate.
enddo.
call method ov->show_speed.
endloop.

Hi
Now try this:
REPORT ZTEST_VEHICLEOO .
PARAMETERS: P_CAR   TYPE I,
            P_READ TYPE I.
*       CLASS vehicle DEFINITION
CLASS VEHICLE DEFINITION.
PUBLIC SECTION.
    CLASS-DATA: MAX_SPEED   TYPE I,
                MAX_VEHICLE TYPE I,
                NR_VEHICLES TYPE I.
    CLASS-METHODS CLASS_CONSTRUCTOR.
    METHODS CONSTRUCTOR.
    METHODS ACCELERATE.
    METHODS SHOW_SPEED.
    METHODS GET_SPEED EXPORTING E_SPEED TYPE I.
PRIVATE SECTION.
    DATA: SPEED      TYPE I,
          NR_VEHICLE TYPE I..
ENDCLASS.
*       CLASS vehicle IMPLEMENTATION
CLASS VEHICLE IMPLEMENTATION.
METHOD CLASS_CONSTRUCTOR.
    NR_VEHICLES = 0.
ENDMETHOD.
METHOD CONSTRUCTOR.
    NR_VEHICLES = NR_VEHICLES + 1.
    NR_VEHICLE = NR_VEHICLES.
ENDMETHOD.
METHOD ACCELERATE.
    SPEED = SPEED + 1.
    IF MAX_SPEED < SPEED.
      MAX_SPEED   = SPEED.
      MAX_VEHICLE = NR_VEHICLE.
    ENDIF.
ENDMETHOD.
METHOD SHOW_SPEED.
    WRITE: / 'Speed of vehicle nr.', NR_VEHICLE, ':', SPEED.
ENDMETHOD.
METHOD GET_SPEED.
    E_SPEED = SPEED.
ENDMETHOD.
ENDCLASS.
DATA: OV     TYPE REF TO VEHICLE,
      OV_TAB TYPE TABLE OF REF TO VEHICLE.
DATA: V_TIMES TYPE I,
      FL_ACTION.
DATA: V_SPEED TYPE I.
START-OF-SELECTION.
DO P_CAR TIMES.
    CREATE OBJECT OV.
    APPEND OV TO OV_TAB.
ENDDO.
LOOP AT OV_TAB INTO OV.
    IF FL_ACTION = SPACE.
      FL_ACTION = 'X'.
      V_TIMES = SY-TABIX * 2.
    ELSE.
      FL_ACTION = SPACE.
      V_TIMES = SY-TABIX - 2.
    ENDIF.
    DO V_TIMES TIMES.
      CALL METHOD OV->ACCELERATE.
    ENDDO.
    CALL METHOD OV->SHOW_SPEED.
ENDLOOP.
SKIP.
WRITE: / 'Higher speed', VEHICLE=>MAX_SPEED, 'for vehicle nr.',
            VEHICLE=>MAX_VEHICLE.
SKIP.
READ TABLE OV_TAB INTO OV INDEX P_READ.
IF SY-SUBRC <> 0.
    WRITE: 'No vehicle', P_READ.
ELSE.
    CALL METHOD OV->GET_SPEED IMPORTING E_SPEED = V_SPEED.
    WRITE: 'Speed of vehicle', P_READ, V_SPEED.
ENDIF.
Try to repeat this using a function group and I think you'll undestand because it'll be very hard to do it.
By only one function group how can u read the data of a certain vehicle?
Yes you can create in the function group an internal table where u store the data of every car: in this way u use the internal table like it was an instance, but you should consider here the example is very simple. Here we have only the speed as characteristic, but really we can have many complex characteristics.
Max

Whats the difference between an INTERFACE and a CLASS?

Whats the difference between an INTERFACE and a CLASS?
Please help.
Thanx.

http://search.java.sun.com/search/java/index.jsp?col=javaforums&qp=%2Bforum%3A31&qt=Difference+between+interface+and+class

Difference between a partition and index

Similar Messages

Maybe you are looking for