Difference between Ace Director and Ace Memeber
What is the Difference between Ace Director and Ace Member?
because recently I saw one Ace director becoming Ace Member... (John)
You have not read the link I provided, have you ?
Ace director are not more senior than Ace member, they have more things to commit to like "Ability to commit to participation in an honorary (noncompensated) capacity for 12 months"...
So, I cannot tell for John, but if one cannot commit within those things, you cannot be Ace director... and it is not "depromoted", probably have less time for this.
Nicolas.
Similar Messages
-
Please can someone tell me the price difference (in ZAR) between the ACE and ACA exams.
Why did you post this in the forum for Adobe Reader?
-
Difference between ACE module and ACE appliance
Hi All,
Can someone help to understand the difference between ACE module and ACE appliance, as i am observing ACE module is providing more throughput when compared the ACE appliance, Is the only advantage we getting with contexts ....
thanks inadvance,
Narayana MallidiHi Narayan,
Apart from providing throughput, ACE module has more to offer ,
http://docwiki.cisco.com/wiki/Cisco_Application_Control_Engine_%28ACE%29_Troubleshooting_Guide_--_ACE_Resource_Limits
The above link will provide a comparision of ACE module and Ace appliance interms of scalability. Apart from that legacy modules wont support compression, but ACE 30 module can support compression.
The major advantage of ACE 30 module is with resepct to SSL throughput, SSL TPS, L4 & L7 CPS, & Concurent Connections per second, apart from the increased contexts
ACE 4710 Data Sheet :
http://www.cisco.com/en/US/prod/collateral/contnetw/ps5719/ps7027/Data_Sheet_Cisco_ACE_4710.html
ACE20 Data Sheet
http://www.cisco.com/en/US/prod/collateral/modules/ps2706/ps6906/product_data_sheet0900aecd8045861b.html
ACE 30 Data Sheet
http://www.cisco.com/en/US/prod/collateral/modules/ps2706/ps6906/data_sheet_c78_632383.html
Regards
Abijith -
Difference between /usr/sap/ and /usr/sapmnt/ Directories
Hi all,
I want to know the difference between /usr/sap/ and /usr/sapmnt/ directiories. We are having exe,profile and global in both directories.
Thx
Ral/usr/sap is symlink to the /usr/sapmnt. You can study this link ( point 2 in procedure) to understand better
http://help.sap.com/saphelp_nw04/helpdata/en/4f/37782a21fc11d288cd0000e83539c3/content.htm
Reward points if useful -
Difference between bridge mode and routed mode on CSS
Hi,
Could some one tell me the difference between routed mode and bridge mode.
Regards
NehaHi,
routed mode:
The CSS acts as a router, it routes packets from the client to the server. The server has the ACE configured as default-gateway.
There is a client-side VLAN and a server-side VLAN. These VLANs have different subnets.
Bridged mode:
The CSS acts as a bridge, it switches frames from the client to the server. The server has the upstream router configured as default-gateway.
There is a client-side VLAN and a server-side VLAN. These VLANs have the same subnet, but different VLAN IDs. The ACE bridges the client traffic from the client-side VLAN to the server-side VLAN.
Bridged mode would be most used in case one cannot change the servers IP addresses, or if address space is an issue.
Hope this helps.
Kind regards,
Dario -
Differences between SharePoint 2007 and 2013 security options?
Hi,
We just did a test upgrade from Sharepoint 2007 to Sharepoint 2013 by copying over the content database. One thing we are noticing is that users who had permissions to upload to a document library no longer have that option in 2013. Is there a difference
between the 2007 and 2013 "contribute" permission?
What can I do to fix this issue?
thanks,
Sherazadtheir is no difference between 2007 & 2013 for Contribute premission.
Contribute having the same rights in 2007 and 2010.
Read permissions, plus:
Add Items
Edit Items
Delete Items
Delete Versions
Browse Directories
Edit Personal User Information
Manage Personal Views
Add/Remove Personal Web Parts
Update Personal Web Parts
You can further check here:
SP 2013: http://technet.microsoft.com/en-us/library/cc721640.aspx
Moss 2007: http://technet.microsoft.com/en-us/library/cc721640(v=office.12).aspx
May be you edit the Contribute permission level, make sure its on its default.
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog -
What is difference between sy-tabix and sy-index.
SAP Seniors,
Can you please let me know what is difference between sy-index and sy-tabix.
I read the SAP help, it is confusing for me. it looks like both are same from help. please help me.
Thank you
Anitha.HI,
Here is a brief description of difference between SY_TABIX and SY_INDEX and using them with several conditions.
SY-TABIX
Current line of an internal table. SY-TABIX is set by the statements below, but only for index tables. The field is either not set or is set to 0 for hashed tables.
APPEND sets SY-TABIX to the index of the last line of the table, that is, it contains the overall number of entries in the table.
COLLECT sets SY-TABIX to the index of the existing or inserted line in the table. If the table has the type HASHED TABLE, SY-TABIX is set to 0.
LOOP AT sets SY-TABIX to the index of the current line at the beginning of each loop lass. At the end of the loop, SY-TABIX is reset to the value that it had before entering the loop. It is set to 0 if the table has the type HASHED TABLE.
READ TABLE sets SY-TABIX to the index of the table line read. If you use a binary search, and the system does not find a line, SY-TABIX contains the total number of lines, or one more than the total number of lines. SY-INDEX is undefined if a linear search fails to return an entry.
SEARCH <itab> FOR sets SY-TABIX to the index of the table line in which the search string is found.
SY-INDEX
In a DO or WHILE loop, SY-INDEX contains the number of loop passes including the current pass.
Hope this helps.
Thank you,
Pavan. -
Difference between sy-tabix and sy-index?
tell me about sy-tabix and sy-index?what is the difference between sy-tabix and sy-index?
Moderator Message: Please search before posting. Read the [Forum Rules Of Engagement |https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement] for further details.
Edited by: Suhas Saha on Jun 18, 2011 5:33 PMHI,
Here is a brief description of difference between SY_TABIX and SY_INDEX and using them with several conditions.
SY-TABIX
Current line of an internal table. SY-TABIX is set by the statements below, but only for index tables. The field is either not set or is set to 0 for hashed tables.
APPEND sets SY-TABIX to the index of the last line of the table, that is, it contains the overall number of entries in the table.
COLLECT sets SY-TABIX to the index of the existing or inserted line in the table. If the table has the type HASHED TABLE, SY-TABIX is set to 0.
LOOP AT sets SY-TABIX to the index of the current line at the beginning of each loop lass. At the end of the loop, SY-TABIX is reset to the value that it had before entering the loop. It is set to 0 if the table has the type HASHED TABLE.
READ TABLE sets SY-TABIX to the index of the table line read. If you use a binary search, and the system does not find a line, SY-TABIX contains the total number of lines, or one more than the total number of lines. SY-INDEX is undefined if a linear search fails to return an entry.
SEARCH <itab> FOR sets SY-TABIX to the index of the table line in which the search string is found.
SY-INDEX
In a DO or WHILE loop, SY-INDEX contains the number of loop passes including the current pass.
Hope this helps.
Thank you,
Pavan. -
What is difference between sy-index and sy-tabix and where both are using ?
what is difference between sy-index and sy-tabix and where both are using ?
hi nagaraju
sy-tabix is in Internal table, current line index. So it can only be used while looping at the internal table.
sy-index is in Loops, number of current pass. This you can use in other loop statements also (like do-enddo loop, while-endwhile)
SY-INDEX is a counter for following loops: do...enddo, while..endwhile
SY-TABIX is a counter for LOOP...ENDLOOP, READ TABLE...
Here is an example from which you can understand the difference between sy-tabix and sy-index.
Itab is an internal table with the following data in it.
id Name
198 XYZ
475 ABC
545 PQR.
loop at itab where id > 300.
write :/ itab-id, itab-name , sy-tabix, sy-index.
endloop.
My output will be :
475 ABC 2 1
545 PQR 3 2
Sy-tabix is the index of the record in internal table.
sy-index gives the no of times of loop passes.
So, for the first record in the output (475 ABC), 2 is the index of the record in internal table and as it is first time loop pass occured, sy-index value is 1.
Regards,
navjot
award points -
The difference between chapter markers and dvd studio pro markers
Does anyone know what is the difference between chapter markers and dvd studio pro markers? I can not find anywhere on Google. Also in the tutorials I have seen, suggesting DVD Studio Pro markers, but it did not mention the chapter markers.
Thanks,"Adding Chapter and Compression Markers to Your Sequence
Once you have your edited sequence or program finished, you can add markers to the sequence for use on DVD. Markers are reference points you can place within clips or sequences that identify specific frames. There are two kinds of markers you can add that directly relate to authoring a DVD—chapter markers and compression markers.
• Chapter markers allow DVD authoring applications to create a navigable chapter list for your exported QuickTime movie. Chapter markers force MPEG keyframes (known as I-frames) at their location, since the DVD specification requires an I-frame at each chapter point.
• Compression markers identify areas of abrupt change and include two types: those that are automatically inserted by Final Cut Pro at all edit points, and those you manually place in the clip or sequence. Like chapter markers, compression markers force I-frames at their location, although in this case it is for better quality encoding, and they are not used to create a chapter list.
Note: When you export a QuickTime movie, you have an option to export various kinds of markers, including compression, chapter, or DVD Studio Pro markers. *When you choose to export DVD Studio Pro markers, Final Cut Pro actually exports chapter markers and all compression markers.* This includes compression markers you set manually, as well as ones created automatically by Final Cut Pro at edit and transition points."
From the Final Cut Pro User Manual.
So, JS was right the first time -
The difference between an iphone and an ipod touch?
i want to know if the difference between an iphone and an ipod touch is just that the iphone is like a phone that has internet and is a phone. or what else is it?
The iPhone includes the same as an iPod Touch but also includes a phone, a camera, and a GPS radio.
In addition to having internet access via wi-fi, the iPhone also has internet access via the cellular network, so as long as you have cellular reception with the iPhone, you have access to the internet in addition to having access via an available wi-fi network. -
The difference between system restore and last good known configuration
hi,
what is the difference between system restore and last good known configuration.
in which situation you use system restore ,and in which situation you use last good known configuration.
very short answer wil be enough.
thanks
johan
h.davidLast Known Good Configuration deals only with Starting Windows eg. a bad registry or incorrect driver is preventing Windows to start.It recovers the registry settings of HKEY_LOCAL_MACHINE\System\CurrentControlSet
While System Restore uses restore points to return your system files and settings to an earlier point in time without affecting personal files. Restore points are created automatically every week, and just before significant system events, such as the installation
of a program or device driver. You can also create a restore point manually.You can undone system restore but there is no such option in Last Known Good Configuration.
Last Known Good Configuration is disabled in Windows 8 or,Windows 8.1 by default.
Try using Last Known Good Configuration if you can't start Windows, but it started correctly the last time you turned on the computer.
Try using System Restore to return the system to an earlier point in time when things worked correctly.
S.Sengupta, Windows Entertainment and Connected Home MVP -
Difference between sy-datum and any given date
Dear Friends;
I have one query regarding DATE I wanna calculate the difference between
SY-DATUM and ANY GIVEN DATE . Is there any function or code available that take one parameter as sy-datum and another parameter as any given date and give result as no. of days between them
Regards;
ParagDATA: DATEDIFF TYPE P.
CALL FUNCTION 'SD_DATETIME_DIFFERENCE'
EXPORTING
date1 = '20071122'
time1 = '000001'
date2 = '20070905'
time2 = '000001'
IMPORTING
DATEDIFF = DATEDIFF
EXCEPTIONS
INVALID_DATETIME = 1
OTHERS = 2.
Greetings,
Blag. -
Difference between sy-uline and uline
Hi All,
Any one of you please update me what is the difference between sy-uline and uline. Also when i give sy-uline in top-of-page event it gives error.
Thanks
sankarwith ULINE u can specify the position from where the ULINE should start
corresponds to WRITE AT 3(10) SY-ULINE.
ULINE AT 3(10) NO-GAP will supress the spacess after the under line
ex : 1
uline at 4(10).
write : / 'My Program'.
uline at 4(10).
ex : 2
write : 'My Program' , sy-uline. -
Difference between sy-datum and sy-datlo
difference between sy-datum and sy-datlo
hi,
The GET TIME statement synchronizes the time on the application server with the time on the database server and writes it to the field SY-UZEIT. SY-DATUM and the system fields for the local timezone (SY-TIMLO, SY-DATLO, and SY-ZONLO) are also reset.
SY-DATLO
Users local date, for example 19981129, 19990628,
SY-DATUM
Current application server date, for example 19981130, 19990627,
SY-DAYST
X during summertime, otherwise space.
SY-FDAYW
Factory calendar day of the week: Monday = 1 Friday = 5.
SY-TIMLO
Users local time, for example 154353, 225312,
SY-TZONE
Time difference in seconds between local time and Greenwich Mean Time (UTC), for example,
360, 10800.
SY-UZEIT
Current application server time. for example 164353, 215312,
SY-ZONLO
Users time zone, for example, EST, UTC,
reward points if useful
Maybe you are looking for
-
How can I desactivat​e the frame of an indicator? Thanks
Hi everyone, 1) I don't know how I can desactivate the frame of the indicator in the VI I have attached. I have set the background to transparent, but it still appears. Infact I would like it to appear exactly as the label on its right. How can I do
-
Addition of new field to customer master data
Hi Is it possible to create a new field in customer master table screen and to have the same field in sales order creation screen. can we do it in Ideas version of ECC. please guide me step by step. Regards Jai
-
Hi, I want to know how I can transfer Notes in my Outlook: Mac 2011 to my iPhone 4S. Am using a Macbook Pro with OSX 10.6.8 Snow Leopard and my 4S is on iOS 6. Jesal
-
Abap proxy for 2 PI server with 1 ERP server
Hi expert, I have 2 production PI server that require abap proxy and RFC adapter communication with 1 production ERP server. In the ERP server sxmb_adm integration server configuration only 1 rfc destination that possible but i have 2 PI server. Is t
-
Plays only 20 seconds, then freezes
I have the U2 edition iPod and on Friday I added new songs (roughly 150?). After I did that my brother borrowed it and used his own headphones. Since yesterday, when I play songs, it only plays 20 seconds and then stops, moves to the next song and it