Difference Between Amount in Doc Curr. and Amount in Second Local Curr.

Dear Moderators:
When we did GR, system will generate one FI document authomatically, I got a question about the amount in FI document, the background is:
Document currency is EUR
Local currency is CNY
The maintained exchange rate in system is 1 EUR = 10.052 CNY;
After done GR, got the PPV item line of FI document as follows: e.g.
PPV G/L account Amount in doc. curr. Amount in local. curr. Amount in second curr.
PPV 840 8,378.55 833.50
The quotient of dividing 8,378.55 by 833.50 is the maintained exchange rate in SAP system.
My question is why the amound in doc. curr. is not equal to the amount in second curr.? What exchange rate does the system use to calculate the amount in doc. curr.?
I'm highly appreciated that you can help me to solve my confused question! Thanks in advance.
Best regards
Z.T

An exchange rate can be entered while entering your document.
Another option is you can define an exchange rate in the document type. Go to OBA7 and know whether any exchange rate type is already defined in the document type.
By default, the system would pick up exchange rate type 'M' from the tables for conversion if no other specific type is mentioned.
Regards

Similar Messages

How2specify Amount in Doc Currency and Amnt in LOCL Curr4same item in FBB1?

Hi Experts,
I need to specify some amount (say, 100) in doc currency and some amount(say, 70) in Local currency for the same line item(say, 0001) of a acct doc in FBB1 transaction........so, let me know that, How proceed in FBB1 tx to meet above requirement? I mean, navigation......because, I hv FBB1 tx input screen, MENU, push buttons, but i did not find any such input fields!! if this is not supports, then Wht is the other tx to meet my requirememt?
thanq

ur correct......thats why am struggling from yesterday that, I hv requiremet that, in the input file, both AMOUNTS are providing, i mean, amount in doc curency and amount in local currency for the same line item.......so, i need to upload this input file to SAP, inturn both amounts to the same line item.....they dont want calculate by the system, they want to hv it explicitly, i was used couple of FMs, no use!! u might hv seen my posts, INTERFACE_DOCUMENT also not meeting my requirement!!
any clue? appreciated.

Difference between SDL Amount posted to finance and amount paid to CPFBorad

Hi ,
Singapore Payroll -help required:-
My issue is: - -> Every month there is a difference between SDL Amount posted to finance and amount paid to CPF board.
Please find following SDL break down from Jan u2013 May 2011.
SDL FI Posting :-/376
Jan 11     Feb 11     Mar 11     Apr 11     May 11
(1,313.05)     (1,220.27)     (1,119.66)     (1,087.04)      (1,339.28)
SDL in CPF Report- pc00_m25_ccpf
Jan 11     Feb 11     Mar 11     Apr 11     May 11
(1,350.00)     (1,574.00)     (1,389.00)     (1,392.00)     (1,373.00)
Diff
Jan 11     Feb 11     Mar 11     Apr 11     May 11
(-36.95)     (-353.73)     (-269.34)     (-304.96)     (-33.72)
What could be the possibility for the errors?
Regards
Thomas
Edited by: Thomas Padiyara on Jun 14, 2011 4:34 AM

Thx Srini..
I have taken a list of wage types marked for SDF through report-PC00_M99_DLGA20
Then have checked that does GLu2019s are mapped o all wage types through report RPDKON00.
It seems to be fine.
For evaluation calss -6 is used for monthly printing. Anyway that is not marked for any of the wage types.
I have analyzed the details in QAS system for March month.
The details are as follows:-
1.     Wage type report - (S_PH9_46000172) = 1119.66
2.     CPF report (PC00_ M25_CCPF) -1389.00.
3.     Posting amount (credit amount 1389.85 sgd - debit amount 270.19 sgd) = 1119.66
It seems to be the debit amount is also getting displayed in the CPF report.
How the debit and credit amt is displaying same as for few employees.
One example is given as follows:-
WT     WT description
/305     E'yee,CPF-curr     2,539.00-Debit           SGD
/305     E'yee,CPF-curr           2,539.00-Credit     SGD
/305     E'yee,CPF-curr           1,152.00-Credit     SGD
/307     E'yer,CPF port     2,031.00-Debit           SGD
/307     E'yer,CPF port           2,031.00-Credit     SGD
/307     E'yer,CPF port           923-Credit     SGD
/370     E'yee, CDAC, a     1-Debit           SGD
/370     E'yee, CDAC, a           1-Credit     SGD
/370     E'yee, CDAC, a           1-Credit     SGD
/376     E'yer, SDF                          11.25-Debit           SGD
/376     E'yer, SDF                              11.25-Credit     SGD
/37I     Total Medisave     45-Debit           SGD
/37I     Total Medisave           45Credit     SGD
/307 three entries (2 credit, one debit)
/376 two entries (one credit, one debit)
Why?
Edited by: Thomas Padiyara on Jun 14, 2011 10:34 AM

Difference between cleared items,open items and all postings (FI).

Hi experts,
Can anybody tell me the difference between cleared items,open items and all postings for an account.
While running corresponding bapis and transaction FAGLL03 (for GL) or FBL1N (for accounts payable) i found that in some cases all postings is less than cleared items or open items for a time period. How could it happen.According to my knowledge all postings should contain cleared items and open items.
Please correct me..
Thanks and Regards
Arjun

Hi Arjun,
For every Billing Documnet created(VBRK/VBRP-VBELN) there will be an accounting document created in BSID/BSAD tables.
OPEN ITEMS means the Billed/Invoice Amounts that are pending from Customers, i.e which we have to receive from Customers.
CLOSED ITEMS means the AMOUNTS received from that customer.
OPEN ITEMS : fetch data from BSID table Only
CLOSED ITEMS : fetch data from BSAD only.
ALL POSTINGS : fetch data from both BSID and BSAD.
Hope this will help.
Regards,
Nitin.

Differences between operational systems data modeling and data warehouse da

Hello Everyone,
Can anybody help me understand the differences between operational systems data modeling and data warehouse data modeling>
Thanks

Hello A S!
What you mean is the difference between modelling after normal form like in operational systems (OLTP) e. g. 3NF and modelling a InfoCube in a data warehouse (OLAP)?
While in a OLTP you want to have data tables free of redundance and ready for transactions meaning writing and reading few records often, in an OLAP-system you need to read a lot of data for every query you do on a database. Often in an OLAP-system you aggregate these amounts of data.
Therefore you use another principle for these database scheme. This is called star schema. This means that you have one central table (called fact table) which holds the key figures and have keys to another tables with characteristics. These other tables are called dimension tables. They hold combinations of the characteristics. Normally you design it that your dimensions are small, so the access on the data is more efficent.
the star scheme in SAP BI is a little more complex than explained here but it follows the same concept.
Best regards,
Peter

Difference between Release DP to SNP and Release profile

Hi Experts,
What is the difference between Release DP to SNP
And maintain Release profile. Can u suggest am lot of confusion about these?
Explain in brief.
prasad

Hi Prasad,
Aparna point is absolutely correct. From usage point of view, date is the only difference.
There are 2 options to release forecast from DP to SNP.
1. Demand Planning -> Planning -> Release -> Release to Supply Network Planning.
2. By creating Rlease profile, activity , planning job, etc
1 is used for online purpose & for few product/location combinations. However 2 is used for the mass processing.
Use 1 to release a limited amount of data (a few product / location combinations only) from Demand Planning to Supply Network Planning. Do not use it for mass releases, for example large planning books.
If you try to release too much data with this transaction, memory problems are likely, since the system tries to read all the data
simultaneously. For mass processing, use 2 - Releasing the Demand Plan with Mass Processing.
Decision is based on data volume & performance.
Hope this helps.
Regards,
Nawanit

Difference between Java EE 5 Platform and J2EE 1.4 Platform

What are differences between Java EE 5 Platform and J2EE 1.4 Platform. How we can choose one for a specific environment.
regards

dont be phsyco. MAy be i m good in other topic than
u. Its time restriction i am facing. OK leave it,
dont reply any help. its ok.
ake careEvery culture has rules under which it operates. This one is no exception. It is the unspoken policy of the forum regulars to heap scorn on people who demonstrate an unwillingness to do things for themselves, or to at least put forth an effort. Therefore you have been the target of a certain amount of vitribution. Perhaps you are the lazy worthless git your posting implies perhaps not. None of my business and I don't really care.
You were pointed to a source of the information you asked for and rather than saying thank you, you demand that the rest of us sacrifice our time to synthesize the information and provide you with an answer about which we actually have very little information, namely what in the bloody <expletive deleted> you're interested in? Oh wait you did say you wanted us to tell you how to pick one or the other.
And you still can't see why you would become the target of a certain amount of ire on the part of the forum regulars. Might want to give that one some thought.
But now to your question, well sort of, I can give you a synopsis of what's changed between 1.4. and EE 5, but if I do that what you will know is that one person told you something. If you use the resources that you've already been given and arrive at your own conclusions and questions you will both know what you found and have a frame of reference with which to address specific questions relating to specific change topics. If you do that, most of us here will be more than happy to discuss adnauseum the ramifications of any and all of the changes.
These are the kinds of topics that we will happily get wrapped up in, but after we've spent our effort and time learning the differences and how they relate to what we're doing why should we concern ourselves with someone who wants a spoon fed answer? Consider this, if you never move beyond bottle fed pablum (formula) you wouldn't be able to tolerate more robust food like say a steak. If you never learn to derive your own answers to questions like this, you will never move forward as a developer.
Now that I've ranted for a while. Read the material you've already been pointed to, come back with comments and questions of your own and we'll be happy to help and comment.
Cheers,
PS.

Difference between the two modes ws_policy and sap_wsdl

Dear All,
what is the difference between the two modes ws_policy and sap_wsdl and how do we set them and where do we set them.
do let me know the steps to be followed.
Thanks & Regards
Venugopal

Venu,
Please check this document from Bill where he has explained clearly:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c00ca32e-f991-2b10-f5be-97114bd2b08f?overridelayout=true
Regards,
---Satish

What is the difference between 11.1.0.1 And 11.1.0.1.1

What is the difference between 11.1.0.1 And 11.1.0.1.1

11.1.0.1 is the base version of Oracle installed on the system.
11.1.0.1.1 is the version of PSU (patch set update) applied to the base release version.
Take a look at this http://docs.oracle.com/cd/B28359_01/server.111/b28310/dba004.htm

What are the differences between SAPR/3 4,7EE and SAP ECC 6.0

Hi All,
Can you provide me any doc/info, which provides the differences between SAPR/3 4,7EE and SAP ECC 6.0
Regds
Raj

hi Rajesh,
Difference between sapr/3 4.7 and sapr/3 ecc 5.0:
See https://sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/a7455fd8-0301-001
All details can be found at http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000497320&_SCENARIO=01100035870000000112&_O
Regards,
santosh

Differences between Hyperion 9.3.1 and 11

Hi All,
Can any one let me know the full differences between Hyperion 9.3.1 and 11 version.
Kindly let me know immedietly ......
Thanks in advance,
Ramachandran J

Hi,
For all the products have a look at the new features documentation at :- http://download.oracle.com/docs/cd/E12825_01/index.htm
If it is just planning then have a read of :- http://download.oracle.com/docs/cd/E12825_01/epm.111/hp_new_features/new_features.html
Ok?
Cheers
John
http://john-goodwin.blogspot.com/

Difference between use of decision table and if/then in business rules

Hello ,
Could some one please explain me difference between use of decision table and if/then in business rules in short.
- Shirish

Hi,
They are equivalent, pretty much what you can do with a decision table you can also do with if/then...
However, decision tables provide automated features that can reduce the number of required rules, as compared to the if/then rules (this is called rule coalescing).
Have a look on this document... Search for 5.1.1 What is a Decision Table?
http://docs.oracle.com/cd/E23943_01/user.1111/e10228/decision.htm#CJHFIAHG
Cheers,
Vlad

Difference between SYNC/ASYNC, LGWR/ARCH, and AFFIRM/NOAFFIRM?

Hi all ;
I need some basic information about following things in data guard.(oracle 10g).
difference between SYNC/ASYNC, LGWR/ARCH, and AFFIRM/NOAFFIRM?

955912 wrote:
Hi all ;
I need some basic information about following things in data guard.(oracle 10g).
difference between SYNC/ASYNC, LGWR/ARCH, and AFFIRM/NOAFFIRM?
I believe information about the terms mentioned are well explained in the document link shared by Suntrupth so I won't explain all of them. But one thing that I believe is requiring a little clarity and that's the use of the term LGWR with the SYNCH and ASYNCH. The usual understanding is it's the LGWR that sends the message to the LNS which further would forward the change vectors to the standby site. But actually its always the LNS that reads the change vectors directly from the log buffer.That's the reason that 11g docs no longer mentions the keyword LGWR along with the SYNC and ASYNC.
HTH
Aman....

Difference between General Ledger Accounting (New) and Old

Hello All,
Please help me with the below:
1)Could any one please explain the difference between General Ledger Accounting (New) and General Ledger Accounting (Old).
After going through the help document I understood that the BI 7 version came up with General Ledger Accounting (New), If this is true then can we still use 0FI_GL_04 in Ecc and BI7.0?
2)what is the difference between 0FI_GL_04 and 0FI_GL_14?
3) Is there any material or link or pdf that explains more clearly about FI - GL implementation in BI.
Thanks in advance.Your help will be much appreciated.

Hi Kiran,
Pl check SDN before Posting
Diff. Between old and New GL :
Using new oEhP3 FI or old FI datasources
Extraction and Reporting of FI-CA: Open Items Data In SAP-BI:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a9996115-0b01-0010-b2b2-d9de0170a425?QuickLink=index&overridelayout=true
Financial Accounting: Procedure for Delta Extraction of Transaction Figures:
http://help.sap.com/saphelp_sm32/helpdata/en/41/4b73415fb9157de10000000a155106/content.htm
Complete FI-GL Information :
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/FigL/FigL.pdf
Regards
Ram
Edited by: Ramakanth Deepak Gandepalli on Jan 29, 2010 5:14 AM

Difference between debugging BI 7.0 and BW 3.5

Hi,
What is difference between debugging BI 7.0 and BW 3.5?How you will debug in 3.5 and Bi 7.0?
Sridhar

Hi,
You need to put breakpoint in order debug.Please check the links below for details.
http://help.sap.com/saphelp_nw70/helpdata/en/c6/617cbee68c11d2b2ab080009b43351/content.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b05aff76-dc5e-2a10-8da3-8a6726492a90
Regards.

Difference between group by roll up and group by cube

Please let me know with an example for the difference between group by roll up and group by cube.
thanks,
Vinodh

http://download.oracle.com/docs/cd/B19306_01/server.102/b14223/aggreg.htm#sthref1601

Difference Between Amount in Doc Curr. and Amount in Second Local Curr.

Similar Messages

Maybe you are looking for