Difference between Availability and Substitution

Hi all ,
Anyone knows the difference between Availability and Substitution ?
Regards
Bella.
Edited :Feb 1, 2010 10:12 AM

Hi,
1. Availability - is when employee is having free days according with work schedule (e.g. weekend), but has to be available to be called for work. In many cases availability time is paid (e.g. 10% of hourly rate), as employee should be available and that implies limitations on spending free time.
If employee is called for work during availability either substitution or overtime can be used.
2. Substitution is used when employee works for some time not according with his normal work schedule that is saved in IT 0007. For example, employee has to work in different shift, substitute colleague, etc. Substitution, has not impact on planed working time in the period, but it does have impact on actual working time in the period.
Cheers

Similar Messages

Difference Between Avail and Ready State

Hi folks,
There are two vaiables in Formula editor's Skillgroup vailables ICM named as Avail and Ready. I want to know what is the difference between Agent Ready State and Agent Available State.
As per my understanding, Agent Available State refere Agent is either in Ready or WrapUp Mode while "Ready" refers only Agent in Ready State. Confirmation Required.
Thanks

Hi Sheeraz,
Please refer the section "Agent States" from page 42 onwards in the below link.
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/cad_enterprise/cadenterprise7_2/user/guide/cad72ug.pdf
Ready -> You are available to receive ACD calls.
Not Ready-> You are not available to receive ACD calls.
Work Not Ready-> You are completing work from a previous call, and are
                             unavailable to receive ACD calls. You change to the Not
                             Ready state when:
                             • You enter wrapup data (if enabled by the system
                                 administrator)
                              • A timer set in the ACD expires (if the ACD uses this
                                   feature)
                              • You manually change state after you enter wrapup
                                 data
Work Ready-> You are completing work from a previous call, and are
                      available to receive ACD calls. You change to the Ready
                        state when:
                       • You enter wrapup data (if enabled by the system
                              administrator)
                       • A timer set in the ACD expires (if the ACD uses this
                             feature)
                        • You manually change state after you enter wrapup
                              data
Hope it helps.
Anand
Please rate helpful posts !!

Difference between Available and Used in Info for MacIntosh HD and Space Free and Space Utilised under Activity Monitor, Disk Usage?

I have a MacBook Air 2010, upgraded to OSX Version 10.8.4. When I click the Macintosh HD and then look under Info, it says I have 120.47GB capacity, Available 60.97GB, Used 59.5GB. However when I look under Activity Monitor, Disk Usage it says Space Utilised 92.18GB, Space free: 28.29GB. Questions:
Why the difference?
Which is more important for computer speed?
How to I reduce "Space Utlised" to closer to "Used"? (I've already moved 25GB of the more bulky, less immediate data to external storage from the computer, including emptying IPhoto Trash and the main Trash. The Space Utilised dropped only from 95GB to 92GB--while the Used space dropped from 85GB to 60GB.)

Iheartapple1970
Just to let you I tried the reindexing before the Mendes advice and it had no effect. Of course, I may have done it wrong. It was the HD icon from the desktop which I dragged into the Privacy window of Spotlight (and then did the +, OK, - and close Spotlight). Should I have dragged in something else? Or opened up the HD and dragged in all the contents?
Also, there is a small section in my HD which is for my wife's account which has a separate user name and password, although it has no data in it and I set it up while under my administrator account original, so my MacAir may think I still "own" it; in any case, I did not get any sort of error message saying I did not have ownership of the entire HD.

Difference between customization and configuration

Hi Sir's
Could i know difference between customization and configuration as well as validation and substitution
Thanks
Edited by: manjusap36 on Oct 22, 2009 7:23 PM

Hi,
The difference between cutomizing and configuration is:
- CONFIGURATION: we will configure the system to meet the needs of your business by using the existing data.
- CUSTOMIZING: we will customise or adapt the system to your business requirements, which is the process of mapping SAP to your business process.
Moreover:
Configuration: Attaching to process flow to the existing one
Customization: Adding new fields/Tables as per client requirements. to customise or adapt the system to your business requirements, which is the process of mapping SAP to your business process. It involves code changes to create functionality that is not available through configuration. Customization can be costly and can complicate future upgrades to the software because the code changes/modifications may not easily migrate to the new version.
Regards
Devi

The difference between N80 and N80IE ?

What is the difference between M80 and N80ie?

02-Jan-2007
07:45 PM
korngear wrote:
The Nokia N80 Internet Edition is a new version of this handset with the same hardware as the normal N80. It is due for release in Q4 of 2006 and will be available in Patina Bronze or Pearl Black, and has the following additional software included.
Yahoo Go! for Mobile
Flickr
Some Amazon Branded Software
'Download!' App management
Internet Telephone - SIP VOIP Frontend
WLAN Wizard
Gizmo VOIP - Gizmo Project VOIP Frontend.
\\en.wikipedia.org//
@Korngear
Thanks.
Could N80 be upgraded to N80IE?

Difference between implicit and explicit enhancement points

Hi Folks,
I had learned many documents to findout the difference between explicit and implicit enhancement point.I got the theoritical knowledge on that but losing on the practical side..
Can anybody help me out with one real time scenario where the explicit enhancement points have been implemented and the step by step procedure to implement it..
Hoping for the positive response from you..
Regards,
Rohan.

Hi Rohan,
In implicit they are available at the beginning of subroutines defined in the standard reports.
Edit-> Enhancement operations->show implicit enhancement options.
This will highlight all the implicit enhancements in the report.
In Explicit enhancement we have two different types of enhancements -
Enhancement point and Enhancement section.
Enhancement point - SAP has some standard functionality defined for a report , but it may be required that you'll need to add your own code. In this case the code that you'll add will be executed along with the standard code.
Enhancement section - SAP has its standard functionality defines but it may not suit your requirement, in that case you may need to add your code and you'll need that code to be executed only. By this method the existing code is automatically commented and a copy of the same code is available to edit.
After executing the report only your code will be executed and the standard code will be bypassed.
For Practicle implementation, follow this link.
Link : [http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/bb54c452-0801-0010-0e84-a653307fc6fc]
i hope it will give you some clear picture....
Thanks.
Anurag

Difference between AR and RA

difference between AR and RA tables in Account Receivables???

Hi,
each table in RA_ /AR_ stores different info.
lets suppose Customer profile RA_ contains interface table. and those details
are available in AR_ tables.
So it depends on each table in AR & RA.
--Basava.S

Difference between scalable and failover cluster

Difference between scalable and fail over cluster

A scalable cluster is usually associated with HPC clusters but some might argue that Oracle RAC is this type of cluster. Where the workload can be divided up and sent to many compute nodes. Usually used for a vectored workload.
A failover cluster is where a standby system or systems are available to take the workload when needed. Usually used for scalar workloads.

T-Code for reporting stock quantity difference between IM and WM

Hi All
I'm probably going to kick myself for asking this quastion but is there a report to show the stock quantity differences between IM and WM?
I have searched the forum first but cannot find info.
We have various differences in IM and WM shown in MD04 and LS26. This is usually the result of an unplanned plant to plant transfer not being recipted in at the destination plant.
If no standard T-code is available, which tables can I join to create my own query?
Thanks in advance
Darren

compare MMBE with LS26
Make sure you dont enter a storage location and storage type in selection screen of LS26.
if you post a difference with LI20, then you have just posted a difference within WM, means you moved a quantity from a bin into the difference storate type 998. The balance of both is still equal to your stock shown in MMBE. You have to clear the difference with IM by executing LI21 transaction. Only then the quantity will disappear from difference storage type and will be adjusted in MM and FI.
LX23 will only report real inconstencies and will adjust them.
If you do a MM movement like 303, then this creates a transfer request in WM, this TR needs to be converted into a TO. to move the stock from the bin to the interim storage type for goods issue.
In your case you created just a negative quant in the interim storage type for goods issue and still have a positive quant in the bin, the balance is equal to the stock shown in MMBE.

What is the difference between upgradation and migration.

Hi Guru's
what is the difference between upgradation and migration.
actuallly i involved in upgradation project, here my role is
1. first i check the query's in 3.5 save the query and transport the query. and check the query in bex analyzer also.
2. go to BI .7 find the query;s ,give the query name and save the query ,
3. once save the query, again will come to 3.5 open the query , it will not open. this is my job here,
come to 7.0 check the query in analyzer also.
i am having littile bit confusion, how it will comes query in 7.0, why are u saving the query's in 3.5 and 7.0
query's already available in 7.0 why are u doing this work?
can i know the upgrades those objects, is it neccessary, if necessary how can i upgrade.
infoobje , transferrules, transferstructure ,infosoure, datasoure,updaterules, ods, cubes.
Points will be Assingned ,
Thanks & Regards
prabhavathi

Hi,
I was talking in a general sense not on a query level.
If your taling about migration in that level meaning as a part of larger upgradation (in your case 3.x to 7) there may be many places where you need to do this kind of activities.
Fr eg migration into new data flow, Migration of Web templates from BW 3.x to Netweaver 2004s, etc
Hope this helps.
Thanks,
JituK

What is the difference between ws_upload and gui_upload

what is the difference between ws_upload and gui_upload
what is the difference between ws_download and gui_down load
pls tell briefly

Hi Kuamr,
UPLOAD and DOWNLOAD, the function modules used until now are not part of the standard set of ABAP commands. They are used to display the file interface on the presentation server. UPLOAD and DOWNLOAD are not compatible with USs and have been replaced by GUI_UPLOAD and GUI_DOWNLOAD.
The new function modules, GUI_UPLOAD and GUI_DOWNLOAD, have an interface that also allows you to write Unicode format to the local hard drive. For a description of these interfaces, refer to the documentation for each function module, available under SAP Easy Access " Development " Function Builder " Goto " Documentation.
Instead of using the function modules, you can use the static methods GUI_UPLOAD and GUI_DOWNLOAD of the global class CL_GUI_FRONTEND_SERVICES.
Hope this resolves your query.
Reward all the helpful answers.
Regards

What is the Difference Between Adapter and Proxy

Hi Master,
I want to know the Difference Between Adapters and Proxies.
And when we are using proxies and Adapters....
Regards,
SReddy

Adapters are part of the Adapter Framework. Adapters provide the technical connectivity to enable the integration of SAP and non-SAP applications through XIs Integration Engine.Again, Adapters are used for connectivity from and to external systems with XI that cannot communicate via proxies.Adapters are only required in SAP systems older than 6.20 and external systems.
Systems based on 6.20or higher can communicate directly with proxies.
The literal definition of a proxy is an object / process authorized to act for another; an agent or a substitute. In simpler terms, proxies in the XI context are objects used to encapsulate the creation (from a sender system) or parsing of XML (at a receiver system) as well as the communication with the relevant runtime components required to send or receive those messages.
Proxies are generated from Message Interface in IR.
The Proxy Runtime controls these objects / processes, and can itself be controlled by the applications it communicates with. The Proxy Runtime currently has the following components available: 1. ABAP Proxy Runtime Communication using XI or Web Services a. Web Service Runtime 2. Java Proxy Runtime Communication using XI (J2EE) The objects that the Proxy Runtime then controls are created via Proxy Generation, for both ABAP and Java. In the following sections a client proxy is used by an application to send messages outside of the system it resides in (normally to the IS in this context). Conversely, a server proxy is used by an application to receive messages from sources outside itself (again, normally the IS in this context).

What's the difference between jsp and jsf?

who can tell me what's the difference between jsp and jsf?
I'm puzzled when I found some of the technology in jsp is so similar to the ones in jsp( javaserver page)

Hi,
Find the difference between JSP and JSF
1. A developer has more control with JSP, but (should) get easier development with JSF
2. Event handling is done differently in JSP (HTTP) and JSF (Java)
3. The UI is designed differently (or should be at least) with JSP (markup) and JSF (components).
4. The end product should also be defined differently - JSP page versus a JSF application.
Is this the only thing that is need to make a decision for either or? Probably not. There are other pieces that need to be taken in account when deciding which technology to use - tools support, enough components, type of application etc.... At this point there are not enough JSF components (although there are some interesting projects underway - Ajaxfaces, Myfaces, ADF Faces, and WebChart 3d) and enterprise tools support is still limited to a few tools vendor. Looking at our ADF Faces components they are currently available as early access (not production) and demands for these components are stacking up, literally, outside my office doorstep. Although I would love to make them production - now! - it is not a viable solution since we are still checking features and fixing critical bugs.
All this combined - not enough enterprise level components in production, lacking tools support etc... - leave customers in a vacuum where the decision is either to continue with JSP, since it is mature and has a wide developer base, or move forward with JSF not sure if the support, or the developers will be there. This is particularly sensitive to customers that need to get started now and be production by summer.
If you are in this vacuum here are some key points promoting JSF:
1. Fundamental unit is the Component
2. Built in event and state management
3. Component sets can be provided by any vendor
4. Closer to ASP.Net or Swing development
5. Choice of UI technology
6. Scale up (rich clients)
7. Scale down (mobile devices)
8. Built into J2EE containers in J2EE 5.0 (tentative)

Differences between standard and pro versions

I was reading the comparision of these two Acrobat versions and for Pro it says:
Edit and enhance photos to add to your PDF communications with Adobe Photoshop® CS5.
Quickly transform static PowerPoint slides into compelling, interactive PDF presentations with Adobe Presenter
Rapidly combine screen recordings, narration, video, slides, and more into a rich media experience with Adobe Captivate® 5
Does that mean that the Pro version includes Photoshop, Presenter and Captivate programs as well? Or, what are the differences? As an aside, the new look and feel of the Adobe website is confusing at best. Seems geared to being flashy, not useful.
Regards, David

Acrobat does not included those other packages. One of the pages that always struck me funny (maybe I have a twisted mind) but has this artistic background is the updates page. The background looks like a lacy bra to me. It is the first thing that comes to mind every time I see it. That is a problem with abstract images (that are typically unnecessary and waste bandwidth), that a lot is in the eye of the beholder. Actually, I have heard from many others that also see the bra.
OK, back to Acrobat. There are several aspects of Acrobat that allow you to have links to the other products built in, but they are not included. The page at http://www.adobe.com/products/acrobatpro/buying-guide.html?promoid=JIJYS provides some info, but a lot is missing. For instance there are differences with PDF Optimize and Reduce File Size I think (sorry, I do not have Std to check). One important one that is part of pro is the preflight option. Apparently Std does not include portfolios or allow PDF comparison according to the chart.
If you are into forms, then Std apparently will do them as AcroForms (my preference, partially because of familiarity), but does not include Designer if that was your preference. Some of the enabling for Reader is not available in Std. Also, Std does not allow embedding Flash. Std is limited for some of the products that include PDF Maker (not a big one for me, but might be important to you).
That is a quick summary based on the chart. However, be aware there are some other features that the chart does not seem to cover. For the difference between Std and Pro, I would suggest getting Pro. The big hit is the initial cost of the product, not the step up to Pro. In a business plan consider the time that might be wasted trying to do some of the things in Pro that are not in Std. Those are the types of issues to consider. Many folks consider the cost to be large, and for a small business it is. However, in the long term it may be worth the cost.
Keep in mind that many large CAD packages in engineering run about $30,000 for a single license, half the cost of the engineer that would use it. Some other tools are about $15,000. In that view, Acrobat is cheap (except for cheapskates like me).

Difference Between BAPI and RFM

Dear Friends,
I have seen a few thread explaining the difference between BAPI and RFM(Remote-enabled function Modules) from functional point of view. I know that there are cases when both are available in BOR. Both can be implement using Object Oriented Technology.
Can any tell me how they differ from techincal point of view ? OR Are they same techinically ?
Thanks in advance,
Rajesh

hi,
Remote Function Call:
RFC is an SAP interface protocol.
Based on CPI-C, it considerably simplifies the programming of communication processes between systems.
RFCs enable you to call and execute predefined functions in a remote system - or even in the same system.
RFCs manage the communication process, parameter transfer and error handling.
http://help.sap.com/saphelp_47x200/helpdata/en/22/042860488911d189490000e829fbbd/frameset.htm.
BAPI
BAPI stands for Business API(Application Program Interface).
A BAPI is remotely enabled function module
ie it can be invoked from remote programs like standalone JAVA programs, web interface etc..
You can make your function module remotely enabled in attributes of Function module but
A BAPI are standard SAP function modules provided by SAP for remote access.
Also they are part of Businees Objest Repository(BOR).
BAPI are RFC enabled function modules. the difference between RFc and BAPI are business objects.
You create business objects and those are then registered in your BOR (Business Object Repository)
which can be accessed outside the SAP system by using some other applications (Non-SAP) such as VB or JAVA.
In this case u only specify the business object and its method from external system
in BAPI there is no direct system call. while RFC are direct system call.
Some BAPIs provide basic functions and can be used for most SAP business object types.
These BAPIs should be implemented the same for all business object types.
Standardized BAPIs are easier to use and prevent users having to deal with a number of different BAPIs.
Whenever possible, a standardized BAPI must be used in preference to an individual BAPI.
Regards
Reshma

Difference between Availability and Substitution

Similar Messages

Maybe you are looking for