Difference between base methods
What is the difference between base methods 07: Percentage from life (after end of life) and 011 ( % from useful life).
Thank you in advance.
Hi
011 (% from useful life) - Here we derive the depreciation from the total useful life of the Asset. The rate of depreciation remains same for each year.
07 - In this case the system calculates the depreciation even after the Useful life of the Asset. We depreciate an Asset until the Net Book value is reached Zero. If the Net Book value of the Asset doesn't reach zero then we can depreciate the Asset beyond the Planned Useful life. We use this in such circumstances.
Regards,
Giridhar
Assign points if useful.
Similar Messages
-
What is the difference between base method 0002 and 0011
Hi,
could you please explain what is the difference between base method 0002 and 0011?
0002: Ordinary: no automatic depreciation
0011: Ordinary: percentage from useful life
if we assing base method: 0002 in dep. key? what will happen in future?
if we assing base method: 0011 in dep. key? what will happen in future?
please clarify my doubt.?
Thanks
InduLet me clear, I have bought WinSL 8.1 SNGL OLP NL Acdmc Legalization GetGenuine (part
No - 4HR-00400). It means my machine has legal OS and I can use it and I dont need to buy WinPro
8.1 SNGL Upgrd OLP NL Acdmc (Part no. - FQC-08173).
is it?
I believe that is correct. There should be no reason to buy both licenses for one machine. You should verify this with your reseller or MS.
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!) -
Difference between Session method and call transaction
Hi,
please give me the differences between session method and call transaction,
briefly explaining synchronus , asynchronus, process, update.
Thanks in advanceHi Vijay Kumar
CLASSICAL BATCH INPUT (Session Method)
CALL TRANSACTION
BATCH INPUT METHOD:
This method is also called as CLASSICAL METHOD.
Features:
Asynchronous processing.
Synchronous Processing in database update.
Transfer data for more than one transaction.
Batch input processing log will be generated.
During processing, no transaction is started until the previous transaction has been written to the database.
CALL TRANSACTION METHOD :
This is another method to transfer data from the legacy system.
Features:
Synchronous processing. The system performs a database commit immediately before and after the CALL TRANSACTION USING statement.
Updating the database can be either synchronous or asynchronous. The program specifies the update type.
Transfer data for a single transaction.
Transfers data for a sequence of dialog screens.
No batch input processing log is generated.
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
Among the two methods call transaction is better compared to session bcoz data transfer is faster in it.
Differences between call transaction and session.
Session Method:
1) Data is not updated in the database table until the session is processed.
2) No sy-subrc is returned.
3) Error log is created for error records.
4) Updation is always synchronous.
Call Transaction Method:
1) Immediate updation in the database table.
2) sy-subrc is returned.
3)Error need to be handled explicitly.
4) updation can be synchronous as well as asynchronous.
2) ya u can use using the N mode no screen.
3)u can't handle multiple transaction in call transaction.
4) u can handle multiple transaction in session using the BDC_INSERT fm.
5)When u go to SM35 u can able to see the error records.
Which is best?
That depends on your requirement. Both of them have there advantages.
According to the situation u can choose any one of these.
difference between batch input and call transaction in BDC Session method.
1) synchronous processing.
2) can tranfer large amount of data.
3) processing is slower.
4) error log is created
5) data is not updated until session is processed.
Call transaction.
1) asynchronous processing
2) can transfer small amount of data
3) processing is faster.
4) errors need to be handled explicitly
5) data is updated automatically
For session method,these are the function modules to b used.
BDC_OPEN_GROUP
BDC_INSERT
BDC_CLOSE_GROUP
For call transaction,this is the syntax.
CALL TRANSACTION TCODE USING BDCDATA
MODE A or E or N
UPDATE A or S
MESSAGES INTO MESSTAB.
Take a scenario where we need to post documents in FB01 and the input file has say 2000 records (2000 documents, not line items in FB01 but 2000 records)
In the BDC call transaction method
We call the transaction FB01 2000 times (once for each record posting) and if the processing fails in record no 3 it can be captured and start with reocord 4.
Eg: Loop at itab.
call transaction FB01
capture errors
endloop.
In the session method.
We do not explicity call the transaction 2000 times, but all the records are appeneded into a session and this session is stored. The processinf of the session is done wwhenever the user wants it to be done. Hence the errors cannot be captured in the program itself
Check these link:
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
http://www.sap-img.com/abap/question-about-bdc-program.htm
http://www.itcserver.com/blog/2006/06/30/batch-input-vs-call-transaction/
http://www.planetsap.com/bdc_main_page.htm
Batch Input Session method is asynchronous as told by others here. But the advantage of this is that you have all the error messages and the data for each transaction held persistantly. You don't have to code anything for processing them or writing the logs.
But at the same time, the same feature can be disadvantageous if you need to react to an error or if there are too many errors to manually correct in a session. Since the session are created in the program and its execution is done seperately, you loose the trackability of such transactions.
With a call transaction, what was a disadvantage above will become an advantage. Call transaction immediately gives you messages back and you can react to it in your program. But the disadvantage is that, if you have several hundreds of transactions to run, running them from within the program can be resource crunching affair. It will hamper the system performance and you cannot really distribute the load. Of course, you have some mechanisms with which you can overcome this, but you will have to code for it. Also, storing the messages and storing the errored transaction data etc will have to be handled by you in the program. Whereas, in batch input session, your program's job is to just create the session, after that everything is standard SAP system's responsibility.
Ideally, you should do a call transaction if the resources are not a problem and if it fails, put the errored transaction into a session.
You can decide based on the data volume that your BDC is processing. If data volume is high go for session else call transaction will do.The call transaction updates will be instantaneous where as session needs to be processed explictly after creation.
Session Method
1) Session method supports both small amount of data aswell as large amount of data
2) data processing is asynchronus and data updation is synchronus.
3) it process multiple apllication while perfomaning validations.
4) in session method data will be updated in data base only after processing session only.
5) system provide by default logfile for handling error records.
6) it supports both foreground aswell as background process
in bdc we use FM ...
bdc_open_group " for creating Session
bdc_insert " adding transaction and bdcdata table for updating database
bdc_close_group " for closing Session
Call Transaction
1) Call transaction exclusively for small amout of data
2) it supports only one apllication while perfoming validations
3) there is no default logfile, We can explicitly provide logic for creating logfile for handling error records.
we can create logfile by using structure....BDCMSGCOLL
4) it doesn't support background processing.
5) data processing is synchronous and Data updation is Synchronous( default), in
this method also supports daya updation in asynchronus process also.
syntax:
Call transaction <transaction-name> using BDCDATA
mode <A/N/E>
update <L/A/S>
messages into BDCMSGCOLL.
BDC:
Batch Data Communication (BDC) is the process of transferring data from one SAP System to another SAP system or from a non-SAP system to SAP System.
Features :
BDC is an automatic procedure.
This method is used to transfer large amount of data that is available in electronic medium.
BDC can be used primarily when installing the SAP system and when transferring data from a legacy system (external system).
BDC uses normal transaction codes to transfer data.
Types of BDC :
CLASSICAL BATCH INPUT (Session Method)
CALL TRANSACTION
BATCH INPUT METHOD:
This method is also called as CLASSICAL METHOD.
Features:
Asynchronous processing.
Synchronous Processing in database update.
Transfer data for more than one transaction.
Batch input processing log will be generated.
During processing, no transaction is started until the previous transaction has been written to the database.
CALL TRANSACTION METHOD :
This is another method to transfer data from the legacy system.
Features:
Synchronous processing. The system performs a database commit immediately before and after the CALL TRANSACTION USING statement.
Updating the database can be either synchronous or asynchronous. The program specifies the update type.
Transfer data for a single transaction.
Transfers data for a sequence of dialog screens.
No batch input processing log is generated.
For BDC:
http://myweb.dal.ca/hchinni/sap/bdc_home.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/bdc&
http://www.sap-img.com/abap/learning-bdc-programming.htm
http://www.sapdevelopment.co.uk/bdc/bdchome.htm
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
http://help.sap.com/saphelp_47x200/helpdata/en/69/c250684ba111d189750000e8322d00/frameset.htm
http://www.sapbrain.com/TUTORIALS/TECHNICAL/BDC_tutorial.html
Check these link:
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
http://www.sap-img.com/abap/question-about-bdc-program.htm
http://www.itcserver.com/blog/2006/06/30/batch-input-vs-call-transaction/
http://www.planetsap.com/bdc_main_page.htm
call Transaction or session method ?
Check the following links:
http://www.sap-img.com/bdc.htm
See below example code :
Call three FM : BDC_OPEN_GROUP,BDC_INSERT and BDC_CLOSE_GROUP.
Once you execute the program and it creates the session at SM35 Transaction.
Report : ZMPPC011
Type : Data upload
Author : Chetan Shah
Date : 05/05/2005
Transport : DV3K919557
Transaction: ??
Description: This ABAP/4 Program creates new Production Versions
(C223). It accepts tab-delimited spreadsheet input and
creates BDC sessions.
Modification Log
Date Programmer Request # Description
06/10/2005 Chetan Shah DV3K919557 Initial coding
report zmppc011 no standard page heading line-size 120 line-count 55
message-id zz.
pool of form routines
include zmppn001.
Define BDC Table Structure
data: begin of itab_bdc_tab occurs 0.
include structure bdcdata.
data: end of itab_bdc_tab.
Input record layout of Leagcy File
data: begin of itab_xcel occurs 0,
matnr(18) type c,
werks(4) type c,
alnag(2) type c,
verid(4) type c,
text1(40) type c,
bstmi like mkal-bstmi,
bstma like mkal-bstma,
adatu(10) type c,
bdatu(10) type c,
stlal(2) type c,
stlan(1) type c,
serkz(1) type c,
mdv01(8) type c,
elpro(4) type c,
alort(4) type c,
end of itab_xcel.
data: begin of lt_pp04_cache occurs 0,
matnr like itab_xcel-matnr,
werks like itab_xcel-werks,
alnag like itab_xcel-alnag,
plnnr like mapl-plnnr,
arbpl like crhd-arbpl,
ktext like crtx-ktext,
end of lt_pp04_cache.
data: v_ssnnr(4) type n,
v_lines_in_xcel like sy-tabix,
v_ssnname like apqi-groupid,
v_trans_in_ssn type i,
wa_xcel LIKE itab_xcel,
l_tabix like sy-tabix,
v_matnr like rc27m-matnr,
v_plnnr like mapl-plnnr,
v_plnal like mapl-plnal,
v_tcode like sy-tcode value 'C223',
v_plnty like plas-plnty value 'R',
v_objty like crhd-objty value 'A',
v_plpo_steus like plpo-steus value 'PP04',
v_verwe like crhd-verwe value '0007'.
Parameters
selection-screen: skip 3.
selection-screen: begin of block 1 with frame.
parameters: p_name like rlgrap-filename
default 'C:\My Documents\InputFile.txt'
obligatory,
bdc session name prefix
p_bdcpfx(6) default 'ZPVCRT'
obligatory,
number for transction per BDC session
p_trnssn type i
default 2000 obligatory,
retain the BDC session after successfull execution
p_keep like apqi-qerase
default 'X',
user who will be executing BDC session
p_uname like apqi-userid
default sy-uname
obligatory.
selection-screen: end of block 1.
possible entry list (F4 dropdown) for input file name
at selection-screen on value-request for p_name.
*-SELECT FILE FROM USERS LOCAL PC
call function 'WS_FILENAME_GET'
exporting
DEF_FILENAME = ' '
def_path = 'C:\Temp\'
mask = ',.,..'
mode = 'O'
title = 'Select File '(007)
importing
filename = p_name
RC =
exceptions
inv_winsys = 1
no_batch = 2
selection_cancel = 3
selection_error = 4
others = 5.
if sy-subrc 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
begin the show
start-of-selection.
read data from input file
perform transfer_xcel_to_itab.
loop at itab_xcel.
hang on to xcel line num
l_tabix = sy-tabix.
each line in the xcel file marks begining of new prod.version defn
if num-of-trnas-in-session = 0, create new BDC session
if v_trans_in_ssn is initial.
perform bdc_session_open.
endif.
begin new bdc script for rtg create trans
fill in bdc-data for prod.version maintenance screens
perform bdc_build_script.
insert the bdc script as a BDC transaction
perform bdc_submit_transaction.
keep track of how many BDC transactions were inserted in the BDC
session
add 1 to v_trans_in_ssn.
if the user-specified num of trans in BDC session is reached OR
if end of input file is reached, close the BDC session
if v_trans_in_ssn = p_trnssn or
l_tabix = v_lines_in_xcel.
perform bdc_session_close.
clear v_trans_in_ssn.
endif.
endloop.
top-of-page.
call function 'Z_HEADER'
EXPORTING
FLEX_TEXT1 =
FLEX_TEXT2 =
FLEX_TEXT3 =
FORM TRANSFER_XCEL_TO_ITAB *
Transfer Xcel Spreadsheet to SAP Internal Table *
form transfer_xcel_to_itab.
Read the tab-delimited file into itab
call function 'WS_UPLOAD'
exporting
filename = p_name
filetype = 'DAT'
IMPORTING
filelength = flength
tables
data_tab = itab_xcel
exceptions
conversion_error = 1
file_open_error = 2
file_read_error = 3
invalid_table_width = 4
invalid_type = 5
no_batch = 6
unknown_error = 7
others = 8.
if sy-subrc = 0.
sort the data
sort itab_xcel by matnr werks.
clear v_lines_in_xcel.
if no data in the file - error out
describe table itab_xcel lines v_lines_in_xcel.
if v_lines_in_xcel is initial.
write: / 'No data in input file'.
stop.
endif.
else.
if file upload failed - error out
write: / 'Error reading input file'.
stop.
endif.
endform.
FORM BDC_SESSION_OPEN *
Open BDC Session *
form bdc_session_open.
create bdc session name = prefix-from-selectn-screen + nnnn
add 1 to v_ssnnr.
concatenate p_bdcpfx v_ssnnr into v_ssnname.
open new bdc session
call function 'BDC_OPEN_GROUP'
exporting
client = sy-mandt
group = v_ssnname
keep = p_keep
user = p_uname
exceptions
client_invalid = 1
destination_invalid = 2
group_invalid = 3
group_is_locked = 4
holddate_invalid = 5
internal_error = 6
queue_error = 7
running = 8
system_lock_error = 9
user_invalid = 10
others = 11.
endform.
FORM BDC_BUILD_SCRIPT *
Build BDC *
form bdc_build_script.
data: l_arbpl like crhd-arbpl,
l_text1 like mkal-text1,
l_mdv01 like mkal-mdv01,
l_mapl like mapl.
clear bdc-data itab - begin of new bdc transaction
clear itab_bdc_tab.
refresh itab_bdc_tab.
read material cross reference tables to determine sap part#
clear : v_matnr, v_plnnr, v_plnal.
perform read_matnr_cross_ref using itab_xcel-matnr
itab_xcel-werks
changing v_matnr.
determine the version description to use
if itab_xcel-text1 is initial.
l_text1 = itab_xcel-verid.
else.
l_text1 = itab_xcel-text1.
endif.
determine the routing group# and group ctr# to use
perform read_routing .
determine the production line to use
if itab_xcel-mdv01 is initial.
if not provided in the file then:
prod line = work ctr on the last PP04 op of the rtg determined above
perform read_wc_on_last_pp04 using v_plnnr v_plnal
changing l_mdv01.
NOTE: when executing the above form\routine, if v_plnnr is initial
or v_plnal is initial, THEN l_mdv01 will automatically be
returned blank (ie initial)
else.
l_mdv01 = itab_xcel-mdv01.
endif.
build bdc script
perform bdc_build_script_record
fill in initial screen
using: 'X' 'SAPLCMFV' '1000',
' ' 'BDC_OKCODE' '=ENTE',
' ' 'MKAL-WERKS' itab_xcel-werks,
' ' 'MKAL-MATNR' v_matnr,
' ' 'MKAL_ADMIN-DISPO' space,
' ' 'MKAL-PLNNR' space,
' ' 'MKAL_ADMIN-STTAG' space,
' ' 'MKAL-PLNNG' space,
' ' 'MKAL-MDV01' space,
' ' 'MKAL-PLNNM' space,
click create button on initial screen and go to detail screen
'X' 'SAPLCMFV' '1000',
' ' 'BDC_OKCODE' '=CREA',
fill in the detail screen and go back to initial screen
'X' 'SAPLCMFV' '2000',
' ' 'BDC_OKCODE' '=CLOS',
' ' 'MKAL_EXPAND-MATNR' v_matnr,
' ' 'MKAL_EXPAND-VERID' itab_xcel-verid,
' ' 'MKAL_EXPAND-TEXT1' l_text1,
' ' 'MKAL_EXPAND-BSTMI' itab_xcel-bstmi,
' ' 'MKAL_EXPAND-BSTMA' itab_xcel-bstma,
' ' 'MKAL_EXPAND-ADATU' itab_xcel-adatu,
' ' 'MKAL_EXPAND-BDATU' itab_xcel-bdatu,
' ' 'MKAL_EXPAND-PLTYG' v_plnty,
' ' 'MKAL_EXPAND-PLNNG' v_plnnr,
' ' 'MKAL_EXPAND-ALNAG' v_plnal,
' ' 'MKAL_EXPAND-STLAL' itab_xcel-stlal,
' ' 'MKAL_EXPAND-STLAN' itab_xcel-stlan,
' ' 'MKAL_EXPAND-SERKZ' itab_xcel-serkz,
' ' 'MKAL_EXPAND-MDV01' l_mdv01,
' ' 'MKAL_EXPAND-ELPRO' itab_xcel-elpro,
' ' 'MKAL_EXPAND-ALORT' itab_xcel-alort,
save the production version from initial screen
'X' 'SAPLCMFV' '1000',
' ' 'BDC_OKCODE' '=SAVE'.
endform.
FORM BDC_SUBMIT_TRANSACTION *
Submit BDC Session *
form bdc_submit_transaction.
Load BDC script as a trqansction in BDC session
call function 'BDC_INSERT'
exporting
tcode = v_tcode
tables
dynprotab = itab_bdc_tab
exceptions
internal_error = 01
not_open = 02
queue_error = 03
tcode_invalid = 04.
endform.
FORM BDC_BUILD_SCRIPT_RECORD *
form bdc_build_script_record using dynbegin name value.
clear itab_bdc_tab.
if dynbegin = 'X'.
move: name to itab_bdc_tab-program,
value to itab_bdc_tab-dynpro,
'X' to itab_bdc_tab-dynbegin.
else.
move: name to itab_bdc_tab-fnam,
value to itab_bdc_tab-fval.
shift itab_bdc_tab-fval left deleting leading space.
endif.
append itab_bdc_tab.
endform.
FORM BDC_SESSION_CLOSE *
Close BDC Session *
form bdc_session_close.
close the session
call function 'BDC_CLOSE_GROUP'
exceptions
not_open = 1
queue_error = 2
others = 3.
skip 2.
if sy-subrc ne 0.
write: / 'Error Closing BDC Session ' , 'RETURN CODE: ', sy-subrc.
else.
write : / 'Session created:', v_ssnname,
50 '# of transactions:', v_trans_in_ssn.
endif.
endform.
*& Form read_routing_cache
*FORM read_routing_cache USING pi_matnr
pi_werks
pi_alnag
pi_verid
pi_mdv01.
DATA: BEGIN OF lt_plpo OCCURS 0,
vornr LIKE plpo-vornr,
objty LIKE crhd-objty,
objid LIKE crhd-objid,
arbpl LIKE crhd-arbpl,
END OF lt_plpo,
l_mapl_plnnr LIKE mapl-plnnr.
determine the routing group#
CLEAR lt_pp04_cache.
chk if its in the cache first, if not then get it from MAPL table
and put it in the cache
READ TABLE lt_pp04_cache WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
IF sy-subrc = 0.
do nothing - lt_pp04_cache header line has rtg#
ELSE.
get the routing group # from MAPL
SELECT plnnr INTO l_mapl_plnnr
FROM mapl UP TO 1 ROWS
WHERE matnr = pi_matnr AND
werks = pi_werks AND
plnty = 'R' AND
plnal = pi_alnag AND
loekz = space.
ENDSELECT.
put it in the cache internal table
IF NOT l_mapl_plnnr IS INITIAL.
lt_pp04_cache-matnr = pi_matnr.
lt_pp04_cache-werks = pi_werks.
lt_pp04_cache-alnag = pi_alnag.
lt_pp04_cache-plnnr = l_mapl_plnnr.
APPEND lt_pp04_cache.
ENDIF.
ENDIF.
if the rtg# was determined AND
-- the work center was not determined yet AND
-- work center was really needed for this line in the input file
then
-- read the work center from last PP04 operation on the routing
-- update the cache accordingly
IF NOT lt_pp04_cache-plnnr IS INITIAL AND
lt_pp04_cache-arbpl IS INITIAL AND
( pi_verid IS INITIAL OR
pi_mdv01 IS INITIAL ).
read the last PP04 operation
CLEAR lt_plpo.
REFRESH lt_plpo.
SELECT vornr eobjty eobjid e~arbpl
INTO CORRESPONDING FIELDS OF TABLE lt_plpo
FROM plas AS b
INNER JOIN plpo AS c
ON bplnty = cplnty AND
bplnnr = cplnnr AND
bzaehl = czaehl
INNER JOIN crhd AS e
ON carbid = eobjid
WHERE b~plnty = v_plnty AND
b~plnnr = lt_pp04_cache-plnnr AND
b~plnal = lt_pp04_cache-alnag AND
c~loekz = space AND
c~steus = v_plpo_steus AND
e~objty = v_objty AND
e~werks = lt_pp04_cache-werks AND
e~verwe = v_verwe.
SORT lt_plpo BY vornr DESCENDING.
READ TABLE lt_plpo INDEX 1.
IF NOT lt_plpo-arbpl IS INITIAL.
lt_pp04_cache-arbpl = lt_plpo-arbpl.
read work center description
SELECT SINGLE ktext INTO lt_pp04_cache-ktext
FROM crtx WHERE objty = lt_plpo-objty AND
objid = lt_plpo-objid AND
spras = sy-langu.
the following read will get the index of the correct record to be
updated in the cache
READ TABLE lt_pp04_cache
WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
MODIFY lt_pp04_cache
INDEX sy-tabix
TRANSPORTING arbpl ktext.
ENDIF.
ENDIF.
*ENDFORM. " read_last_pp04_operation_cache
*& Form read_routing
form read_routing.
data: begin of lt_mapl occurs 0,
plnnr like mapl-plnnr,
plnal like mapl-plnal,
end of lt_mapl,
l_arbpl like crhd-arbpl.
get all the rtg# and grp ctr# from MAPL
select plnnr plnal
into corresponding fields of table lt_mapl
from mapl
where matnr = v_matnr and
werks = itab_xcel-werks and
plnty = v_plnty and "Rate Routing
loekz = space. "with del flag = OFF
sort lt_mapl by plnal.
if not itab_xcel-verid is initial.
if the verid=0001 then use the 1st good rtg-grp# and grp-ctr#
if itab_xcel-verid = '0001'.
read table lt_mapl index 1.
v_plnnr = lt_mapl-plnnr.
v_plnal = lt_mapl-plnal.
else.
if the verid0001 then use the rtg-grp# and grp-ctr# of the routing
whose work center on the last PP04 operation matches the given verid
loop at lt_mapl.
clear l_arbpl.
get the work center from the last PP04 operation
perform read_wc_on_last_pp04 using lt_mapl-plnnr
lt_mapl-plnal
changing l_arbpl.
if itab_xcel-verid = l_arbpl.
v_plnnr = lt_mapl-plnnr.
v_plnal = lt_mapl-plnal.
exit.
endif.
endloop.
endif.
else.
do nothing
endif.
For version IDs that are other then '0000' or 'ZWIP' :--
if itab_xcel-verid NE '0000' and
itab_xcel-verid NE 'ZWIP'.
if routing group# or group counter was not determined, make the
valid-to date 99/99/9999 so that the BDC, on execution, errors out.
if v_plnnr is initial or
v_plnal is initial.
itab_xcel-bdatu = '99/99/9999'.
endif.
endif.
determine the routing group#
CLEAR lt_pp04_cache.
chk if its in the cache first, if not then get it from MAPL table
and put it in the cache
READ TABLE lt_pp04_cache WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
IF sy-subrc = 0.
do nothing - lt_pp04_cache header line has rtg#
ELSE.
get the routing group # from MAPL
put it in the cache internal table
IF NOT l_mapl_plnnr IS INITIAL.
lt_pp04_cache-matnr = pi_matnr.
lt_pp04_cache-werks = pi_werks.
lt_pp04_cache-alnag = pi_alnag.
lt_pp04_cache-plnnr = l_mapl_plnnr.
APPEND lt_pp04_cache.
ENDIF.
ENDIF.
if the rtg# was determined AND
-- the work center was not determined yet AND
-- work center was really needed for this line in the input file
then
-- read the work center from last PP04 operation on the routing
-- update the cache accordingly
IF NOT lt_pp04_cache-plnnr IS INITIAL AND
lt_pp04_cache-arbpl IS INITIAL AND
( pi_verid IS INITIAL OR
pi_mdv01 IS INITIAL ).
read the last PP04 operation
CLEAR lt_plpo.
REFRESH lt_plpo.
SELECT vornr eobjty eobjid e~arbpl
INTO CORRESPONDING FIELDS OF TABLE lt_plpo
FROM plas AS b
INNER JOIN plpo AS c
ON bplnty = cplnty AND
bplnnr = cplnnr AND
bzaehl = czaehl
INNER JOIN crhd AS e
ON carbid = eobjid
WHERE b~plnty = v_plnty AND
b~plnnr = lt_pp04_cache-plnnr AND
b~plnal = lt_pp04_cache-alnag AND
c~loekz = space AND
c~steus = v_plpo_steus AND
e~objty = v_objty AND
e~werks = lt_pp04_cache-werks AND
e~verwe = v_verwe.
SORT lt_plpo BY vornr DESCENDING.
READ TABLE lt_plpo INDEX 1.
IF NOT lt_plpo-arbpl IS INITIAL.
lt_pp04_cache-arbpl = lt_plpo-arbpl.
read work center description
SELECT SINGLE ktext INTO lt_pp04_cache-ktext
FROM crtx WHERE objty = lt_plpo-objty AND
objid = lt_plpo-objid AND
spras = sy-langu.
the following read will get the index of the correct record to be
updated in the cache
READ TABLE lt_pp04_cache
WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
MODIFY lt_pp04_cache
INDEX sy-tabix
TRANSPORTING arbpl ktext.
ENDIF.
ENDIF.
endform. " read_last_pp04_operation_cache
*& Form read_wc_on_last_pp04
form read_wc_on_last_pp04 using pi_plnnr
pi_plnal
changing pe_arbpl.
data: begin of lt_plpo occurs 0,
vornr like plpo-vornr,
objty like crhd-objty,
objid like crhd-objid,
arbpl like crhd-arbpl,
end of lt_plpo.
get all the PP04 operations for the given rtg# & grp-ctr#
select vornr eobjty eobjid e~arbpl
into corresponding fields of table lt_plpo
from plas as b
inner join plpo as c
on bplnty = cplnty and
bplnnr = cplnnr and
bzaehl = czaehl
inner join crhd as e
on carbid = eobjid
where b~plnty = v_plnty and "Rate Routing
b~plnnr = pi_plnnr and
b~plnal = pi_plnal and
c~loekz = space and "Oper Del Flag = OFF
c~steus = v_plpo_steus and "PP04
e~objty = v_objty. "WC Obj Type = 'A'
read the last operation
sort lt_plpo by vornr descending.
read table lt_plpo index 1.
pe_arbpl = lt_plpo-arbpl.
endform. " read_wc_on_last_pp04
Goto LSMW-> Select Direct Input method in 1st step. These are the standard programs for data transfer.
Otherwise goto SPRO->SAP Reference IMG-> Under this you'll find standard data transfer programs module wise.
Reward points,
Shakir -
Differences between Synchronized methods and blocks
Hi all,
I would like to differences between Synchronized methods and blocks.
- MuniWell, you'll get so many of right answers in next ten to thirty minutes.
I like to yield :)
Oooo... Ten minutes has passed.
Synchronized block is a toilet room with a lock in a public lavatory.
Only one person(running thread) can have the lock at a time.
And, she/he have to receive the lock from a particular object obj like:
synchronized(obj){.....} // one object has only one lock for this {} toilet and for any other toilets how many there are... *
(*: In other words, while a thread is executing a synchronized(obj){} block, other threads can't enter other synchronized(obj){} blocks.)
Synchronized method is a kind of synchronized block.
This special block is defaulted to have lock from the object on which the method is defined.
public class Foo{public synchronized Method(){}}
use the lock of a Foo object.
Message was edited by:
hiwa
Message was edited by:
hiwa -
Difference between Base Hierachy and Alternate Hierachy
Hi da,
Can you please tell me what is the difference between base hierachy and alternate hierachy ?
and is there some other types of hierachies ?
Thanks and Regards,
Sri.Let's say you have a Time dimension and it has a Hierarchy called "Total Year".
It might look like the following:
Total Year
--Q1 +
----Jan +
----Feb +
----Mar +
--Q2 +
----Apr +
----May +
----Jun +
--Q3 +
----Jul +
----Aug +
----Sep +
--Q4 +
----Oct +
----Nov +
----Dec +
'Total Year' is your base hierarchy.
Now suppose you work for a CFO who is very superstitious and believes all months that begin with the letter 'J' are bad luck because he had a traumatic experience when he was a kid in the month of July. Anyway, he wants to track activity for months that begin with 'J' and asks you to create an alternate hierarchy.
It would like this
'Bad Luck Months'
--Jan + (Shared Member)
--Jun + (Shared Member)
--Jul + (Shared Member)
So your alternate hierarchy consists of "Shared Members" from your base hierarchy. It allows you to group the members in a different ("alternate") way.
HTH -
Difference between Java Method and a java function
what is the difference between a method in java and a function
in java ?
( i have seen that main() is called a function but the others
are method )
is it for main can only be called by JVM ?
please help if u can...
suman
( [email protected] )Though Ceci isn't a programmer, his answer is closer: strictly speaking, Java has no functions.
The Java Language Specification, 2nd Ed, mentions the word "function" thrice: in the sense "to function as something", when talking about a C function, and in the index as "mathematical function". (Get the spec under "documentation" on the left hand side of your screen.)
So, officially, no functions.
Informally, many people use "function" and "method" as synonyms. You may even find some that calls a void-returning method "procedure" and value methods "function" (perhaps Pascal background?). And a Lisp programmer might call Runnable.run() a "thunk", but he'd just be pulling your leg. -
Difference between Session method and Call transaction method
Hi,
Difference between Session method and Call transaction method in BDCHi,
SESSION method:
Is a standard procedure for transferring large amount of data into the R/3 system.
Data consistency is ensured because batch input uses all thje checks conducted on the normal screen.
It is a two step procedure:
1. Progarm: creates batch input session. This session is the data file that includes everything to begin the transaction.
2. Process session: Which then actually transfers the data to database table.
In this method an ABAP/4 program reads the external data that is to be entered in the SAP system and stores the data in a session.
A session stores the actions that are required to enter your data using normal SAP transactions i.e. data is transferred to session which inturn transfers data to database table. Session is an intermediate step between internal table and database table.
Data along with it's actions are stored in session. i.e. data for screen fields, to which screen it is passed, the program name behind it and how next screen is processed.
When the program has finished generating the session, u can run the session to execute the SAP transactions in it.
BDC_OPEN_GROUP
You create the session through program by BDC_OPEN_GROUP function.
1) User Name: User Name.
2) Group : Name of the session
3) Lock Date : The date when you want to process the session.
4) Keep : This parameter is passed as 'X' when you want to retain session even after processing it.
BDC_INSERT
Data is transferred to session by BDC_INSERT.
BDC_CLOSE_GROUP.
With this function the session will be closed.
CALL TRANSACTION method.
Syntax: call transaction <tr code> using <bdctab>
mode <A/N/E>
update <S/A>
messages into <internal table>.
<tr code> : transaction code
<bdctab> : Name of the BDC table
mode: mode in which you execute the transaction.
A : all screen mode ( all the screens of the transaction are displayed )
N : no screen mode ( no screen will be displayed when you execute the transaction )
E : error screen ( only those screens are displayed where in you have error record )
Update type:
S: synchronous update in which if you change data of one table then all the related tables gets updated and SY_SUBRC is returned for once and all.
A: asynchronous update in which if you change data of one table, the sy-subrc is returned and then updation of other affected tables takes place. So if system fails to update other tables still sy-subrc returned is zero.(that is when first table gets updated ).
messages: if you update database table, operation is either successful or unsuccessful. These messages are stored in internal table. This internal table structure is like BDCMSGCOLL.
TCODE: transaction code.
DYNAME: batch input module name.
DYNNUMB: batch input dyn no.
MSGTYP: batch input message type.
MSGSPRA: batch input language id of message.
MSGID: message id.
MSGV1 .MSGV5: message variables
For each entry which is updated in the database table message is available in BDCMSGCOLL.
Reward if useful
Regards
Srinu -
Difference between "base quantity" and "operation quantity" in an operation
Hello
what is the difference between "base quantity" and "operation quantity" in a production order ?
thank you for your answersBase Quantity - Quantity of the material to be produced to which the standard values of the operation refer.
Operation Quantity - Quantity planned for this operation.
Base quantity and operation quantity may not always be the same, if we have partial lots delivered during the sequence of operations, the operation quantity will be equal to the lot delivered during the operation.
Base quantity is dependent on the BOM, where it signifies the total quantity of output after using the components of certain quantity.
Hope this may help you. -
Difference between constructor & Methods if any ?
In the below code I use the constructor ConstructorShirt1('M') to pass the value of M to the class ConstructorShirt1, but why do we have to do this, instead can we not just use a method and write the same thing in a method.
class ConstructorShirt1Test {
public static void main (String args[]) {
ConstructorShirt1 constShirt = new ConstructorShirt1('M');
char colorCode;
colorCode = constShirt.getColorCode();
System.out.println("Color Code: " + colorCode);
class ConstructorShirt1 {
private int shirtID = 0; // Default ID for the shirt
private String description = "-description required-"; // default
// The color codes are R=Red, B=Blue, G=Green, U=Unset
private char colorCode = 'U';
private double price = 0.0; // Default price for all items
private int quantityInStock = 0; // Default quantity for all items
public ConstructorShirt1(char startingCode) {
switch (startingCode) {
case 'R':
case 'G':
case 'B':
colorCode = startingCode;
break;
default:
System.out.println("Invalid colorCode. Use R, G, or B");
public char getColorCode() {
return colorCode;
} // end of class
So I am not clear what is the difference between constructor and methods if any ? or if not when to use a constructor and when to use a method.
I would be glad if somebody throws light on this topic.
PKThere shouldn't be any confusion on this one... a constructor is meant to create an instance of the class. It can also set the state of its member variables in the process, like the constructor you are using. The same can also be done by a method.
Wouldn't make much of a difference for simple programs, but this is more pertinent when it comes to designing classes. Like if the developer using the class needs to know what all states he has to set before he needs to do anything useful, then it is better to provide a constructor with some arguments for doing that. -
Difference between narrow() method usage and simple class cast for EJB
Hi,
I have a very simple question:
what is the difference between PortableRemoteObject.narrow(fromObj,
toClass) method usage and simple class cast for EJB.
For example,
1)
EJBObject ejbObj;
// somewhere in the code the home.create() called for bean ...
ABean a = (ABean)PortableRemoteObject.narrow(ejbObj,ABean.class);
OR
2)
EJBObject bean;
// somewhere in the code the home.create() called for bean ...
ABean a = (ABean)ejbObj;
Which one is better?
P.S. I'm working with WL 6.1 sp2
Any help would be appreciated.
Thanks in advance,
Orly[email protected] (Orly) writes:
Hi,
I have a very simple question:
what is the difference between PortableRemoteObject.narrow(fromObj,
toClass) method usage and simple class cast for EJB.
For example,
1)
EJBObject ejbObj;
// somewhere in the code the home.create() called for bean ...
ABean a = (ABean)PortableRemoteObject.narrow(ejbObj,ABean.class);
OR
2)
EJBObject bean;
// somewhere in the code the home.create() called for bean ...
ABean a = (ABean)ejbObj;
Which one is better?(1) is mandated by the spec. It is required because CORBA systems may
not have sufficient type information available to do a simple case.
P.S. I'm working with WL 6.1 sp2 You should always use PRO.narrow()
andy -
What is the difference between Base licence and upgrade licence?
What is the difference between WinSL 8.1 SNGL OLP NL Acdmc Legalization GetGenuine (part No - 4HR-00400)
Base licence and WinPro 8.1 SNGL Upgrd OLP NL Acdmc (Part no. - FQC-08173).
Are they both necessary??Let me clear, I have bought WinSL 8.1 SNGL OLP NL Acdmc Legalization GetGenuine (part
No - 4HR-00400). It means my machine has legal OS and I can use it and I dont need to buy WinPro
8.1 SNGL Upgrd OLP NL Acdmc (Part no. - FQC-08173).
is it?
I believe that is correct. There should be no reason to buy both licenses for one machine. You should verify this with your reseller or MS.
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!) -
I want to clarify the following, please help!!!
class A
{ public void f()
{ System.out.println("A->f");
class B extends A
{ public void g()
{ System.out.println("B->g");
public class Test
{ public static void main(String[] args)
{ A a = new A();
A a = new B();
a.f();
//a.g();
A a = new A(); //(1)
means create an instance of class A of type A. Correct??
A b = new B(); //(2)
means create an instance of class B of type A
In both (1) and (2), instance "a" can access any methods of class A, but
cannot access any methods of class B
What's the difference then???I want to clarify the following, please help!!!
class A
{ public void f()
{ System.out.println("A->f");
class B extends A
{ public void g()
{ System.out.println("B->g");
public class Test
{ public static void main(String[] args)
{ A a = new A();
A a = new B();
a.f();
//a.g();
A a = new A(); //(1)
means create an instance of class A of type A.
Correct??Not quite. It means "define a variable 'a' of type 'class A', create an instance of 'class A' and assign the reference to that instance to variable 'a'.
A b = new B(); //(2)
means create an instance of class B of type ANot quite. It means "define a variable 'b' of type 'class A', create an instance of 'class B' and assign the reference to that instance to variable 'b'.
In both (1) and (2), instance "a" can access any
methods of class A, but
cannot access any methods of class BWell, the object actually referenced by the variable of type 'class A' is really an instance of class B and so if class B implemented a different behavior for any method defined in class A, then calling that method through a variable of class A would still get the behavior of class B - i.e. you get polymorphism.
Chuck -
Difference between base type 362 & 363 in taxinj procedure
Currently, we are using base type 362 for base amount BASB in TAXINJ procedure, but in frieght condition type FRB1 tax is not properly getting calculated. If we change the base type to 363, then tax is getting calculated correctly. Can anyone suggest what will be the other impact if we change base type from 362 to 363 for base amount BASB in TAXINJ procedure.
Hi,
363 is used for all sales tax {VAT (Inv or set -off) & CST} and 362 is used for to pick base value to BASB condition type from MM pricing procedure.
Check frieght condition type FRB1 and the frieght value related not added to NET value in PO.
Regards,
Biju K -
Dear forum,
I would like to seek advice on the above.
I do not sure what is the difference between base method and base value in multilevel method.
What is the difference between these 2 base?
ThanksHi,
If you go ti AFAMA nd chosse a depr, key you can see the base Method as one component of the key.
Here is defined:
- Type of depreciation
- Dep. method and
- Treatment of end of depreciaion
If you take a look at the "multilevel method (also in AFAMA) you can see the base value.
The value used as the basis for the calculation of depreciation.
Regards Bernhard -
Difference between Object equals() method and ==
Hi,
Any one help me to clarify my confusion.
stud s=new stud();
stud s1=new stud();
System.out.println("Equals======>"+s.equals(s1));
System.out.println("== --------->"+(s==s1));
Result:
Equals ======> false
== ------------> false
Can you please explain what is the difference between equals method in Object class and == operator.
In which situation we use Object equals() method and == operator.
Regards,
Saravanan.Kcorlettk wrote:
I'm not sure, but I suspect that the later Java compilers might actually generate the same byte code for both versions, i.e. I suspect the compiler has gotten smart enough to devine that && other!=null is a no-op and ignore it... Please could could someone who understands bytecode confirm or repudiate my guess?Don't need deep understanding of bytecode
Without !=null
C:>javap -v SomeClass
Compiled from "SomeClass.java"
class SomeClass extends java.lang.Object
SourceFile: "SomeClass.java"
minor version: 0
major version: 49
Constant pool:
const #1 = Method #4.#15; // java/lang/Object."<init>":()V
const #2 = class #16; // SomeClass
const #3 = Field #2.#17; // SomeClass.field:Ljava/lang/Object;
const #4 = class #18; // java/lang/Object
const #5 = Asciz field;
const #6 = Asciz Ljava/lang/Object;;
const #7 = Asciz <init>;
const #8 = Asciz ()V;
const #9 = Asciz Code;
const #10 = Asciz LineNumberTable;
const #11 = Asciz equals;
const #12 = Asciz (Ljava/lang/Object;)Z;
const #13 = Asciz SourceFile;
const #14 = Asciz SomeClass.java;
const #15 = NameAndType #7:#8;// "<init>":()V
const #16 = Asciz SomeClass;
const #17 = NameAndType #5:#6;// field:Ljava/lang/Object;
const #18 = Asciz java/lang/Object;
SomeClass();
Code:
Stack=1, Locals=1, Args_size=1
0: aload_0
1: invokespecial #1; //Method java/lang/Object."<init>":()V
4: return
LineNumberTable:
line 1: 0
public boolean equals(java.lang.Object);
Code:
Stack=2, Locals=2, Args_size=2
0: aload_1
1: instanceof #2; //class SomeClass
4: ifeq 25
7: aload_1
8: checkcast #2; //class SomeClass
11: getfield #3; //Field field:Ljava/lang/Object;
14: aload_0
15: getfield #3; //Field field:Ljava/lang/Object;
18: if_acmpne 25
21: iconst_1
22: goto 26
25: iconst_0
26: ireturn
LineNumberTable:
line 6: 0
}With !=null
C:>javap -v SomeClass
Compiled from "SomeClass.java"
class SomeClass extends java.lang.Object
SourceFile: "SomeClass.java"
minor version: 0
major version: 49
Constant pool:
const #1 = Method #4.#15; // java/lang/Object."<init>":()V
const #2 = class #16; // SomeClass
const #3 = Field #2.#17; // SomeClass.field:Ljava/lang/Object;
const #4 = class #18; // java/lang/Object
const #5 = Asciz field;
const #6 = Asciz Ljava/lang/Object;;
const #7 = Asciz <init>;
const #8 = Asciz ()V;
const #9 = Asciz Code;
const #10 = Asciz LineNumberTable;
const #11 = Asciz equals;
const #12 = Asciz (Ljava/lang/Object;)Z;
const #13 = Asciz SourceFile;
const #14 = Asciz SomeClass.java;
const #15 = NameAndType #7:#8;// "<init>":()V
const #16 = Asciz SomeClass;
const #17 = NameAndType #5:#6;// field:Ljava/lang/Object;
const #18 = Asciz java/lang/Object;
SomeClass();
Code:
Stack=1, Locals=1, Args_size=1
0: aload_0
1: invokespecial #1; //Method java/lang/Object."<init>":()V
4: return
LineNumberTable:
line 1: 0
public boolean equals(java.lang.Object);
Code:
Stack=2, Locals=2, Args_size=2
0: aload_1
1: instanceof #2; //class SomeClass
4: ifeq 29
7: aload_1
8: ifnull 29
11: aload_1
12: checkcast #2; //class SomeClass
15: getfield #3; //Field field:Ljava/lang/Object;
18: aload_0
19: getfield #3; //Field field:Ljava/lang/Object;
22: if_acmpne 29
25: iconst_1
26: goto 30
29: iconst_0
30: ireturn
LineNumberTable:
line 6: 0
}
Maybe you are looking for
-
Creative Cloud Desktop no longer works after update
Ever since the last Creative Cloud Desktop update I can no longer use it - tyo check for updates etc I have to go to individual programs. All I get when I open CC Desktop is a blank rectangle. One can't avoid CC Desktop updates as the only option oth
-
File Copy to local attached Firewire "LaCie" not working any longer
Dear all, have Updated my Mac Book to the latest 10.6.3 Release and since following is not longer working: Copying from FinalCutPro created Quicktime *.mov Files from the internal HD via Finder to the Firewire Drive - Error Message "Der Vorgang konnt
-
Can I turn my old router into a Wireless Acess Point?
I have recently found my old BEFW11S4 V4 Wireless Router. It has the latest firmware. What I was wondering is it possible to turn it into an Access Point, so that I can increase the range of my Wireless Network. I currently have A wireless router on
-
Download entire dashbord page at once.
Hi Experts, I have several small reports on dashborad page... Is it possible to download all the reports from dashboard page at once? Thanks, Mani.
-
moments ago my imac froze up and i had to restart. when i came back the icons in my finder window were missing. i ran disk utility and corrected a bunch of permissions for lack of knowing what else to do. are there other utilities i can run or anythi