Difference between BIOS 14CN67WW & 14CN94WW for S10e

What´s the difference between this two BIOS updates for the S10e?
And why is it the same BIOS (14CN94WW) for the two models: S10 and S10e? Before this version every bios update was an independent version for this two models.
I see that they have different summary changes but they have the same info:
  If you update to the BIOS version 14CN47ww or later, you are not able to get back to the older BIOS versions.
LCD LID open resumes system only when system entering suspend(sleep) mode in the LID close state.
When Password on boot enabled in BIOS Setup, system would ask for password input on every booting, including Cold boot(power on), Warm boot(reboot) and resuming from Hibernate. The password prompt would always request for Supervisor password, however either Supervisor password or user password accepted.
When an HDD password is set, a system would ask for a password input on every booting, inlcuding Cold boot, Warm boot and resume from Hibernate.

I used 14cn67ww for the longest time because I liked how quiet the fan was during normal use.  However I began to be frustrated with how sluggish the machine felt, so I tried upgrading to the most recent version, i.e. 14cn94ww.  My netbook is noticeably faster, while the fan is now running continuously.  From these observations, it would seem that 14cn67ww restricted the motherboard in such a way to prevent overheating the processor, thus requiring less fan use to appease complaining forum members.  I think I will stick with 14cn94ww despite the loud fan noise because I prefer to use the machine to the best of it's capabilities.
The above might be specific to my case, but I can say I have been following these bios updates since the beginning of the year, so I've been able to notice the little changes that occur with each iteration.  I don't have a bios editor to examine exactly what is different between the two versions, though, so you'll have to try them out yourself to see if my empirical judgments apply to your case.

Similar Messages

  • What's the difference between PNG and JPG for exporting .idea files from the Adobe Ideas app?

    What's the difference between PNG and JPG for exporting .idea files from the Adobe Ideas app?
    What situations are better to export to to .PNG or .JPG?
    J

    iPad apps are designed specifically for the iPad and will not run on the iPhone or iPod Touch. iPhone/iPod apps will run on the iPad, but will only take up an iPhone sized portion of the iPad screen (though you get a 2x button which effectively doubles each pixel in both directions so may appear pixelated). There are also 'universal' apps (which have a '+' symbol against them in the store) which have processing in them to recognise the device that they are on and will tailor the display accordingly (so will make use of the iPad's larger screen).

  • Difference between OC4J Standalone & IIS for BI Presentation services

    Hi experts,
    i had this question in my mind for last couple of weeks and did not get good answer by self study.
    my understanding with IIS & OC4J server is,
    1.if BI Presentation services is setup to IIS Webserver, It is also using OC4J as application server, because IIS is just an HTTP Server where the presentation services also need an Application server which is OC4J for OBIEE. Is this true.
    2.if the IIS Server is only HTTP Server, what is OC4J and standlone OC4J for OBIEE.
    i think the difference between IIS and OC4J is ( true or false)
    1. oc4j or oc4j Standalone is application server( contains OC4J Instance(J2EE) and HTTP Server)
    2. oc4j itself has a an HTTP server which is used if we dont plan to deploy IIS Webserver.
    3. IIS server is only HTTP which can be used in Production environments and will still use OC4j as application server.
    MY question is how to configure IIS server and configuration files and oc4j if we plan to deploy a environment like this.
    i followed OBIEE installtion documents and did not get a clear picture.
    there is something called PLUG-IN's (iis plugin and j2ee plugin ) which is used if we deploying on IIS and OAS(WEBLOGIC)
    this is is my understanding and Please Correct me if i am wrong
    thanks
    kumar

    Please follow this up on your copy of the thread difference between OC4J Standalone & IIS for BI Presentation services

  • Difference between Oracle Enterprise Pack for Eclipse 11gR1 & Eclipse IDE

    Dear ,
    what is the difference between Oracle Enterprise Pack for Eclipse 11gR1 (link http://blogs.oracle.com/devtools/2009/08/oracle_enterprise_pack_for_ecl_2.html)
    and Eclipse IDE for Java EE Develpr (link http://www.eclipse.org/downloads/ )

    Hello,
    Thanks for your question.
    The Web Service Design View was part of the Workshop product.
    For OEPE, which was a new product starting in the summer of 2008, we don't have a Web Service Design view.
    The Web Service Design View and Properties view for Workshop supported a lot of JAX-RPC features.
    Given enough interest we will certainly consider a Design View for OEPE that would support the JAX-WS web service platform.
    Regards,
    Andrew

  • Difference between Service Pack 5 for CR-XI (R2) and BOE-XI (R2)

    Difference between "Service Pack 5" for CR-XI (R2) and BOE-XI (R2)
    ========
    There are two different "Service Pack 5" files available for download...
    CRYSTAL REPORTS XI (R2) = crxir2win_sp5.exe
    BUSINESS OBJECTS ENTERPRISE XI (R2) = boxir2win_sp5.exe
    If we have workstations that have both CRYSTAL REPORTS XI and the BUSINESS OBJECTS ENTERPRISE "Client Tools" installed locally on them do I need to run both versions of the "Service Pack 5" - or will running just one (1) of them update all the installed desktop tools...?
    Thanks in advance!

    I think the CR patch has client issues only.
    The enterrpsie one is sufficient in most cases. Is that CR XIR1 or CR XIR2 client you have installed? Make sure it's CR XIR2 or you could run into issues
    Regards,
    Tim

  • What is a difference between MB01 and MBST  for GR Cancellation

    Hi,
    What is a difference between MB01 and MBST  for GR Cancellation.
    Regards,
    Aditya

    Hi,
    MB01 is used for doing the GR for collective PO at a single instance.
    This transaction will be utilize when an individual needs to create a material document.  A material document can only be displayed or changed after it has been generated in the SAP system.  In a computer based inventory management system, the principal of "no posting without a document" applies.  A material document is generated and stored in the SAP system for every transaction that causes a change in stock.
    As mentioned, when a goods movement is posted a material document is created.  It serves as proof of the movement   If the movement updates a G/L account; an accounting document is also created. The material and accounting document s are identified by unique document numbers
    Once you have posted a goods movement, you cannot change material numbers, quantities or account numbers in the material document.  You can however use the Change command to enter additional or change text information such as comments or references.  To reverse the movement or change a quantity, a new transaction must be performed.
    MBST:-
    Perform this transaction when a previously performed goods issue must be cancelled due to an error in data entry or other circumstances deem the previous transaction unnecessary.
    Prerequisites:-
    A previously played transaction that requires cancellation.
    An existing Material Document in SAP.
    This Transaction will be utilized when an individual needs to cancel a material document due to a data entry error or other circumstances deem a previous transaction unnecessary. A material document can only be cancelled after it has been generated in the SAP system. A material document is generated and stored in the SAP system for every transaction that causes a change in stock.
    Performing this transaction will "undo" a previous transaction by reversing individual line items in a material document or by reversing an entire material document. This transaction will reinstate the affected cost center, purchase order or stock location to the state they were in prior to playing the original transaction.
    Regards,
    Archit

  • What's the difference between task list release for order and release for c

    What's the difference between task list release for order and release for cost?

    Pallavi,
    The status of the task list determines in which other application areas the respective task list may be used.
    Release for costing: means that the task list can be used to calculate costs in Transaction IA16 i.e. the costs for the task list operations would be calculated if released for costing status is set.
    Release for use in the order: Released for Order means that you can use the task list in an order i.e. you could include operations from a task list in an order.
    Regards,
    Usman

  • Does anyone know the difference between the Applecare Warranty for the Macbook Pro and the Applecare Protection Plan Auto Enroll 607-8192-B APP FOR MacBook

    Does anyone know the difference between the Applecare Warranty for the Macbook Pro and the Applecare Protection Plan Auto Enroll 607-8192-B APP FOR MacBook

    AFAIK, the difference is that the auto-enroll occurs automatically when you purchase the device and you will have to disburse the cost right there and then. Whereas the other comes in a box, can be purchased separately later and you must manually enroll your device into the system to activate the additional protection. This must occur before the base one year warranty is over.
    So, if you don't want to pay up at the moment you buy the computer, you can wait up to say 11 months and buy the AppleCare warranty extension later. Just be sure to complete the enrollment BEFORE the base warranty is over, else Apple will not honor the extension (all in the fine print). This applies to all devices that offer an AppleCare option: notebooks, desktops, iStuff, etc.

  • Is there any significant difference between the headphone jack for 120gb or 160gb

    hi all,
    Is there any significant difference between the headphone jack for all ipod classic models.
    please advise?
    really appreciate.
    thanks

    Other than possibly the part number, probably not.
    B-rock

  • Re: Satellite A200-1DY: Is there difference between BIOS 32bit & 64bit

    I have Satellite A200 laptop and i have a doubt and is if there are diferences between Vista 32 and 64 Bios. Or is the same Bios?
    My question is because in the last days i installed Home Premiun 64bit but my Bios is for Vista 32bit but every works fine on laptop.
    Should i change the Bios for 64bits or should i let 32 bits Bios?
    thanks

    Hi again ;)
    I think there is a difference between both BIOS versions; 32bit and 64bit but please dont ask me what the difference exactly is. ;)
    I didnt find any details regarding the differences.
    I assume the BIOS 64bit supports some advantages of the 64bit CPUs and the 64bit software but this is only a assumption
    However, I think you dont need to switch to the 64bit BIOS version if your notebook run stable and trouble free using the 32bit version.
    Greetings

  • Huge performance differences between a map listener for a key and filter

    Hi all,
    I wanted to test different kind of map listener available in Coherence 3.3.1 as I would like to use it as an event bus. The result was that I found huge performance differences between them. In my use case, I have data which are time stamped so the full key of the data is the key which identifies its type and the time stamp. Unfortunately, when I had my map listener to the cache, I only know the type id but not the time stamp, thus I cannot add a listener for a key but for a filter which will test the value of the type id. When I launch my test, I got terrible performance results then I tried a listener for a key which gave me much better results but in my case I cannot use it.
    Here are my results with a Dual Core of 2.13 GHz
    1) Map Listener for a Filter
    a) No Index
    Create (data always added, the key is composed by the type id and the time stamp)
    Cache.put
    Test 1: Total 42094 millis, Avg 1052, Total Tries 40, Cache Size 80000
    Cache.putAll
    Test 2: Total 43860 millis, Avg 1096, Total Tries 40, Cache Size 80000
    Update (data added then updated, the key is only composed by the type id)
    Cache.put
    Test 3: Total 56390 millis, Avg 1409, Total Tries 40, Cache Size 2000
    Cache.putAll
    Test 4: Total 51734 millis, Avg 1293, Total Tries 40, Cache Size 2000
    b) With Index
    Cache.put
    Test 5: Total 39594 millis, Avg 989, Total Tries 40, Cache Size 80000
    Cache.putAll
    Test 6: Total 43313 millis, Avg 1082, Total Tries 40, Cache Size 80000
    Update
    Cache.put
    Test 7: Total 55390 millis, Avg 1384, Total Tries 40, Cache Size 2000
    Cache.putAll
    Test 8: Total 51328 millis, Avg 1283, Total Tries 40, Cache Size 2000
    2) Map Listener for a Key
    Update
    Cache.put
    Test 9: Total 3937 millis, Avg 98, Total Tries 40, Cache Size 2000
    Cache.putAll
    Test 10: Total 1078 millis, Avg 26, Total Tries 40, Cache Size 2000
    Please help me to find what is wrong with my code because for now it is unusable.
    Best Regards,
    Nicolas
    Here is my code
    import java.io.DataInput;
    import java.io.DataOutput;
    import java.io.IOException;
    import java.util.HashMap;
    import java.util.Map;
    import com.tangosol.io.ExternalizableLite;
    import com.tangosol.net.CacheFactory;
    import com.tangosol.net.NamedCache;
    import com.tangosol.util.Filter;
    import com.tangosol.util.MapEvent;
    import com.tangosol.util.MapListener;
    import com.tangosol.util.extractor.ReflectionExtractor;
    import com.tangosol.util.filter.EqualsFilter;
    import com.tangosol.util.filter.MapEventFilter;
    public class TestFilter {
          * To run a specific test, just launch the program with one parameter which
          * is the test index
         public static void main(String[] args) {
              if (args.length != 1) {
                   System.out.println("Usage : java TestFilter 1-10|all");
                   System.exit(1);
              final String arg = args[0];
              if (arg.endsWith("all")) {
                   for (int i = 1; i <= 10; i++) {
                        test(i);
              } else {
                   final int testIndex = Integer.parseInt(args[0]);
                   if (testIndex < 1 || testIndex > 10) {
                        System.out.println("Usage : java TestFilter 1-10|all");
                        System.exit(1);               
                   test(testIndex);               
         @SuppressWarnings("unchecked")
         private static void test(int testIndex) {
              final NamedCache cache = CacheFactory.getCache("test-cache");
              final int totalObjects = 2000;
              final int totalTries = 40;
              if (testIndex >= 5 && testIndex <= 8) {
                   // Add index
                   cache.addIndex(new ReflectionExtractor("getKey"), false, null);               
              // Add listeners
              for (int i = 0; i < totalObjects; i++) {
                   final MapListener listener = new SimpleMapListener();
                   if (testIndex < 9) {
                        // Listen to data with a given filter
                        final Filter filter = new EqualsFilter("getKey", i);
                        cache.addMapListener(listener, new MapEventFilter(filter), false);                    
                   } else {
                        // Listen to data with a given key
                        cache.addMapListener(listener, new TestObjectSimple(i), false);                    
              // Load data
              long time = System.currentTimeMillis();
              for (int iTry = 0; iTry < totalTries; iTry++) {
                   final long currentTime = System.currentTimeMillis();
                   final Map<Object, Object> buffer = new HashMap<Object, Object>(totalObjects);
                   for (int i = 0; i < totalObjects; i++) {               
                        final Object obj;
                        if (testIndex == 1 || testIndex == 2 || testIndex == 5 || testIndex == 6) {
                             // Create data with key with time stamp
                             obj = new TestObjectComplete(i, currentTime);
                        } else {
                             // Create data with key without time stamp
                             obj = new TestObjectSimple(i);
                        if ((testIndex & 1) == 1) {
                             // Load data directly into the cache
                             cache.put(obj, obj);                         
                        } else {
                             // Load data into a buffer first
                             buffer.put(obj, obj);                         
                   if (!buffer.isEmpty()) {
                        cache.putAll(buffer);                    
              time = System.currentTimeMillis() - time;
              System.out.println("Test " + testIndex + ": Total " + time + " millis, Avg " + (time / totalTries) + ", Total Tries " + totalTries + ", Cache Size " + cache.size());
              cache.destroy();
         public static class SimpleMapListener implements MapListener {
              public void entryDeleted(MapEvent evt) {}
              public void entryInserted(MapEvent evt) {}
              public void entryUpdated(MapEvent evt) {}
         public static class TestObjectComplete implements ExternalizableLite {
              private static final long serialVersionUID = -400722070328560360L;
              private int key;
              private long time;
              public TestObjectComplete() {}          
              public TestObjectComplete(int key, long time) {
                   this.key = key;
                   this.time = time;
              public int getKey() {
                   return key;
              public void readExternal(DataInput in) throws IOException {
                   this.key = in.readInt();
                   this.time = in.readLong();
              public void writeExternal(DataOutput out) throws IOException {
                   out.writeInt(key);
                   out.writeLong(time);
         public static class TestObjectSimple implements ExternalizableLite {
              private static final long serialVersionUID = 6154040491849669837L;
              private int key;
              public TestObjectSimple() {}          
              public TestObjectSimple(int key) {
                   this.key = key;
              public int getKey() {
                   return key;
              public void readExternal(DataInput in) throws IOException {
                   this.key = in.readInt();
              public void writeExternal(DataOutput out) throws IOException {
                   out.writeInt(key);
              public int hashCode() {
                   return key;
              public boolean equals(Object o) {
                   return o instanceof TestObjectSimple && key == ((TestObjectSimple) o).key;
    }Here is my coherence config file
    <?xml version="1.0"?>
    <!DOCTYPE cache-config SYSTEM "cache-config.dtd">
    <cache-config>
         <caching-scheme-mapping>
              <cache-mapping>
                   <cache-name>test-cache</cache-name>
                   <scheme-name>default-distributed</scheme-name>
              </cache-mapping>
         </caching-scheme-mapping>
         <caching-schemes>          
              <distributed-scheme>
                   <scheme-name>default-distributed</scheme-name>
                   <backing-map-scheme>
                        <class-scheme>
                             <scheme-ref>default-backing-map</scheme-ref>
                        </class-scheme>
                   </backing-map-scheme>
              </distributed-scheme>
              <class-scheme>
                   <scheme-name>default-backing-map</scheme-name>
                   <class-name>com.tangosol.util.SafeHashMap</class-name>
              </class-scheme>
         </caching-schemes>
    </cache-config>Message was edited by:
    user620763

    Hi Robert,
    Indeed, only the Filter.evaluate(Object obj)
    method is invoked, but the object passed to it is a
    MapEvent.<< In fact, I do not need to implement EntryFilter to
    get a MapEvent, I could get the same result (in my
    last message) by writting
    cache.addMapListener(listener, filter,
    true)instead of
    cache.addMapListener(listener, new
    MapEventFilter(filter) filter, true)
    I believe, when the MapEventFilter delegates to your filter it always passes a value object to your filter (old or new), meaning a value will be deserialized.
    If you instead used your own filter, you could avoid deserializing the value which usually is much larger, and go to only the key object. This would of course only be noticeable if you indeed used a much heavier cached value class.
    The hashCode() and equals() does not matter on
    the filter class<< I'm not so sure since I noticed that these methods
    were implemented in the EqualsFilter class, that they
    are called at runtime and that the performance
    results are better when you add them
    That interests me... In what circumstances did you see them invoked? On the storage node before sending an event, or upon registering a filtered listener?
    If the second, then I guess the listeners are stored in a hash-based map of collections keyed by a filter, and indeed that might be relevant as in that case it will cause less passes on the filter for multiple listeners with an equalling filter.
    DataOutput.writeInt(int) writes 4 bytes.
    ExternalizableHelper.writeInt(DataOutput, int) writes
    1-5 bytes (or 1-6?), with numbers with small absolute
    values consuming less bytes.Similar differences exist
    for the long type as well, but your stamp attribute
    probably will be a large number...<< I tried it but in my use case, I got the same
    results. I guess that it must be interesting, if I
    serialiaze/deserialiaze many more objects.
    Also, if Coherence serializes an
    ExternalizableLite object, it writes out its
    class-name (except if it is a Coherence XmlBean). If
    you define your key as an XmlBean, and add your class
    into the classname cache configuration in
    ExternalizableHelper.xml, then instead of the
    classname, only an int will be written. This way you
    can spare a large percentage of bandwidth consumed by
    transferring your key instance as it has only a small
    number of attributes. For the value object, it might
    or might not be so relevant, considering that it will
    probably contain many more attributes. However, in
    case of a lite event, the value is not transferred at
    all.<< I tried it too and in my use case, I noticed that
    we get objects nearly twice lighter than an
    ExternalizableLite object but it's slower to get
    them. But it is very intersting to keep in mind, if
    we would like to reduce the network traffic.
    Yes, these are minor differences at the moment.
    As for the performance of XMLBean, it is a hack, but you might try overriding the readExternal/writeExternal method with your own usual ExternalizableLite implementation stuff. That way you get the advantages of the xmlbean classname cache, and avoid its reflection-based operation, at the cost of having to extend XMLBean.
    Also, sooner or later the TCMP protocol and the distributed cache storages will also support using PortableObject as a transmission format, which enables using your own classname resolution and allow you to omit the classname from your objects. Unfortunately, I don't know when it will be implemented.
    >
    But finally, I guess that I found the best solution
    for my specific use case which is to use a map
    listener for a key which has no time stamp, but since
    the time stamp is never null, I had just to check
    properly the time stamp in the equals method.
    I would still recommend to use a separate key class, use a custom filter which accesses only the key and not the value, and if possible register a lite listener instead of a heavy one. Try it with a much heavier cached value class where the differences are more pronounced.
    Best regards,
    Robert

  • Difference between MMBE & MBBS report for sales order stock E

    Hi,
    What is the difference between MMBE & MBBE report bcoz we are getting difference in sales order stock in both reports.
    Thanks in advance.
    Regards
    Basavraj Patil

    Hi,
    MBBS will give the STOCK OVERVIEW  for specific sales order and specific Project
    MMBE will give the stock at PLANT, STORAGE LOCATION, & At Special stock indicator level.
    The sales order stocks will be same at both, You have to count the stock of sales order at all the Plants and Storage location level inorder to get the same stock of MBBS at the sales order level
    Hope it is clear,
    santosh

  • Difference between these Thunderbolt cables for an iMac?

    What is the difference between these two Thunderbolt cables for connecting Thunderbolt harddrive docking station to an iMac?
    http://store.apple.com/us/product/MD862ZM/A/apple-thunderbolt-cable-05-m
    http://store.apple.com/us/product/MD861ZM/A/apple-thunderbolt-cable-20-m
    Thanks!

    Along the lines of this topic, does anyone know whether Mini DisplayPort cables are usable for Thunderbolt? Here's one, for example, that's cheaper than Apple's $29 cable:
    http://www.amazon.com/exec/obidos/ASIN/B009NE77TQ/
    I would be concerned about (at least) two things:
    1. Can it handle the speed?
    2. Does it have the right circuit?
    It's possible that if it *seems* to work in a thunderbolt application, you might still run into trouble with intermittent data failure if it's not up to the task.
    Thanks for any thoughts.

  • Differences between AIX and Windows for SAP

    Dear All,
    I have a problem regarding SAP Software.We want to change our company software .First we order SAP On Windows with Oracle10g But Now We want SAP on AIX with Oracle10g.
    SAP delivered us software on Windows platform.
    Please Suggest me for this as what are the differences between the above two platforms and what are the differences between the above 2 platforms.
    Regards,
    Pankaj Kalsayan

    hi Pankaj,
    well, this is a very general question. perhaps you could specify a little more.
    in general i would see no difference regarding the end user sitting in front of his pc using sapgui.
    as far as i know all server side sap software is available for aix and windows (and many more).
    for administration on the other hand there is of course lots of difference. AIX is a UNIX operating system running on special hardware with power processors. it offers quit extensive virtualisation abilities using so called LPARs and supports real big number of CPUs and large RAM. Windows is a completly differnet operating system running mostly on x86/amd64 hardware.
    therefore you should also consider what know-how is available in your system administration.
    not shure if that is partly answering your question ...
    btw. if you are going forward with AIX you should perhaps consider switching oracle with db2. so you have a consistent IBM based landscape. also to me, sap and db2 seem to "like" each other more than sap and oracle
    regards,
    martin

  • Difference between LTS and lT for expression bulide

    I am using the OBIEE 10g ,in the administration tools , can you tell me the difference between '...' button for expression bulide(Column Mapping) in the Logical Table Source and '...' button for expression bulide in the Logical Column ?
    Thanks.
    Edited by: kobe on Jan 8, 2012 10:00 PM

    hai..
    I wil tell you with example. In bmm layer, amount_sold is there and it is aggregated.Suppose, if you want to reuse that aggregated column, we cannot. At that time, create a new logical column ,goto-->expression builder-->select the logical fact table-->logical column(i.e,amount_sold).By doing this, we can reuse that amount_sold column.
    Thanks,
    :)

Maybe you are looking for

  • BOLD 9780 switch to Q 10

    Trying to switch from BOLD 9780 to Q 10. After a couple of hours of trying the BB Desktop, it finally tells me that it doesn't support  OS 10 and gives me aURL for BB Link. Click the URL and get a BB Home page. After an hour of searching I still can'

  • Server Error in '/simias10' Application

    Im losing sleep and hair over this error ==================== Server Error in '/simias10' Application The resource cannot be found. Description: HTTP 404. The resource you are looking for (or one of its dependencies) could have been removed, had its

  • How can I get iTunes to actually download?

    iTunes won't download on my computer. It takes me to the "Thank you for downloading iTunes" page, but nothing ever happens. I have a laptop with Windows 7 and the pop-up where you can run or save never appears. Please help!

  • Why does the youtube app doesn't play in HD?

    Why does the youtube app doesn't play in HD? I couldn't find any option of changing the stream option also. Please help!

  • My reset security answers are been sent to an email i don't know.

    I need my answers to by music from the store on my new iPad. And yes I forgot them. But the problem is, that they are send to an emailadress I do not know. Very weird. So now its impossible to by things.