Difference between BIW and BPS
Hi All,
Please give me brief overview of BPS and tell me the difference between BPS and BIW.
Regards,
Vaishali.
hi vaishali ,
BPS is Buisness Planning & Simulation
whereas BIW -Buisness Information Warehouse.
The difference between them is diffrence of pupose
The BIW is use to store large amount of Enterprice data according to module collected from various source systems & provide it in summarised form to various analytical applications the BIW stores data in the manner that it can be easily retrieved and displayed to end user in for analysis .
the reports may be generated in excel format or as web page .
the basic idea behind BW is that the data stored in warehouse in in detailed format and if used for reporting directly causes performance issues
Now for BPS It is a planning application . ie it provides environm,ent for creating planning applications like Balance sheet planning budgeting ,Investment planning etc.
the BIW store Master And transaction Data( actual data )
the Planning data is Entered through BPS into what we call as transaction cubes . we can also use actual data do some forecasting on it( apply planning functions on it and store it as plan data this plan data can be used for further reporting purpose by the enterprice.
Hope this clarifies you doubt
Nidhi
Similar Messages
-
Difference between reconstruct and reload?
Hi All,
1.What is difference between reconstruct and reload?
2.User exits for variables? Examples.
3.Your delta failed from R/3. No records in extraction queue and delta queue. How would you get those records?
4.ODS has 5 requests? If bottom request is removed would top request be affected?
5.Web application developer experience. Did you work on BPS?
6.Experience working with Info Hub?
thanks,
deen> Hi All,
>
> 1.What is difference between reconstruct and reload?
> 2.User exits for variables? Examples.
> 3.Your delta failed from R/3. No records in
> extraction queue and delta queue. How would you get
> those records?
> 4.ODS has 5 requests? If bottom request is removed
> would top request be affected?
> 5.Web application developer experience. Did you work
> on BPS?
> 6.Experience working with Info Hub?
>
> thanks,
> deen
hi,
reconstruction: means we get same request data from PSA to data target.
reload: reload means again the data is loaded with new request number.
your 3rd quesition is not clear
2 ans.For variable with customer exit we have one enhancement that is RSR00001.If u want to populate data to u r variable dynamically then we gofor this exit.We can do this in CMOD transactin code.
3 ans.yes there is effect.the top request are deleted. -
What is the difference between BW and BI
Hi Experts,
I am new to BW
What is the difference between BW and BI
Please Help me
Thanks and Regards
saveen kumarHI
Difference Between BI & BW?
1.in bw infopackage is used to transfer data to data target but in bi dtp is uesd
2in bw infosource is mandatory but in bi infosource is not mandatory.
3.in bi we have new ud connect which is not there in bw
4. in bi we have new reporting tool know as visual composer
5.in bi we have integrated planning but in bw we have bps
6. in bi we don't have selection tree for psa but in bw we have
7 we can monitor all the tree from ss to datatarget in one window
8.in bi we have polling process in proces chain
9.we are having more features in web designer in bi
10. in bi we have bi accelerator which we dont have in bw
11 in bi we have rda mechanism which we dont have in bw
Thanks & regards
kiran -
Difference between Null and null?
What is the difference between null and NULL?
When is each used?
Thanks,veryConfused wrote:
There is a null in java, but no NULL. null means no value. However, when assigning value, the following is different:Although the empty String has no special role. Null means, the referential type is not assigned (doesn't refer) to a specific object. The empty String is just another object though, so seeing it or pointing it out as something special when it actually isn't at all (no more special than new Integer(0) or new Object[0]) just adds to the confusion. -
Difference between GUI_UPLOAD and WS_UPLOAD
Hi,
Please make me clear about the difference between GUI_UPLOAD and WS_UPLOAD. In which cases we need to use these modules...??
Thanks,
SatishI would suggest to always use the GUI_UPLOAD. I say this because this is the function module which is used in the GUI_UPLOAD method of the class CL_GUI_FRONTEND_SERVICES. Really, you should probably use the class/method instead of the function module.
data: filename type string.
filename = p_file.
call method cl_gui_frontend_services=>gui_upload
exporting
filename = filename
filetype = 'ASC'
changing
data_tab = iflatf
exceptions
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
no_authority = 6
unknown_error = 7
bad_data_format = 8
unknown_dp_error = 12
access_denied = 13
others = 17.
Regards,
Rich Heilman -
Difference between char and varchar, also the difference between varchar2
Hi,
Can anyone explain me the difference between char and varchar, and also the difference between varchar and varchar2...Varchar2 is variable width character data type, so if you define column with width 20 and insert only one character to tis column only, one character will be stored in database. Char is not variable width so when you define column with width 20 and insert one character to this column it will be right padded with 19 spaces to desired length, so you will store 20 characters in the dattabase (follow the example 1). Varchar data type from Oracle 9i is automaticlly promoted to varchar2 (follow example 2)
Example 1:
SQL> create table tchar(text1 char(10), text2 varchar2(10))
2 /
Table created.
SQL> insert into tchar values('krystian','krystian')
2 /
1 row created.
SQL> select text1, length(text1), text2, length(text2)
2 from tchar
3 /
TEXT1 LENGTH(TEXT1) TEXT2 LENGTH(TEXT2)
krystian 10 krystian 8
Example 2:
create table tvarchar(text varchar(10))
SQL> select table_name,column_name,data_type
2 from user_tab_columns
3 where table_name = 'TVARCHAR'
4 /
TABLE_NAME COLUMN_NAME DATA_TYPE
TVARCHAR TEXT VARCHAR2
Best Regards
Krystian Zieja / mob -
The difference between Lion and Mountain Lion
Can some one explain to me the difference between Lion and Mtn Lion? I'm currently 10.6.8 Is it beneficiall for me to upgrade?
Mountain Lion is an enhanced version of previous OS X and so that is Mavericks.
About upgrading it all depends on what your needs are and if your hardware supports it.
System requirements for OS X Lion
System requirements for OS X Mountain Lion
OS X Mavericks: System Requirements
Please check also applications compatibility. From Lion onward, you cannot run PPC application. -
The difference between N80 and N80IE ?
What is the difference between M80 and N80ie?
02-Jan-2007
07:45 PM
korngear wrote:
The Nokia N80 Internet Edition is a new version of this handset with the same hardware as the normal N80. It is due for release in Q4 of 2006 and will be available in Patina Bronze or Pearl Black, and has the following additional software included.
Yahoo Go! for Mobile
Flickr
Some Amazon Branded Software
'Download!' App management
Internet Telephone - SIP VOIP Frontend
WLAN Wizard
Gizmo VOIP - Gizmo Project VOIP Frontend.
\\en.wikipedia.org//
@Korngear
Thanks.
Could N80 be upgraded to N80IE? -
The difference between SFP+ and X2
Dear Expert,
I need to know what is the difference between SFP+ and X2! and can I use SFP+ card and module instead of X2?
Thanks,
Mohammad SaeedHi,
They are both used for 10Gig interfaces. The difference is the connector type.
SFP+ is LC and X2 is SC.
You can not put an SFP+ into an X2 slot or X2 optic into a SFP+.
HTH -
Difference between ok_code and sy-ucomm
Hi,
Can any one tell me the difference between ok_code and sy-ucommHi,
Actually OK_CODE and SY-Ucomm are the same. But experts suggest use of OK code for following reason:
In each PAI event that a user triggers by choosing either a pushbutton on the screen or an element in a GUI status, the corresponding function code is placed into the system field SYST-UCOMM or SY-UCOMM and placed in the OK_CODE field (as long as the function code is not empty). Empty function codes are placed in neither the SY-UCOMM field nor the OK_CODE field.
In your ABAP programs, you should work with the OK_CODE field instead of SY-UCOMM. There are two reasons for this: Firstly, the ABAP program has full control over fields declared within it, and secondly, you should never change the value of an ABAP system field. However, you should also always initialize the OK_CODE field in an ABAP program for the following reason:
In the same way that the OK_CODE field in the ABAP program and the system field SY-UCOMM receive the contents of the corresponding screen fields in the PAI event, their contents are also assigned to the OK_CODE screen field and system field SYST-UCOMM in the PBO event. Therefore, you must clear the OK_CODE field in the ABAP program to ensure that the function code of a screen is not already filled in the PBO event with an unwanted value. This is particularly important when the next PAI event can be triggered with an empty function code (for example, using ENTER). Empty function codes do not affect SY-UCOMM or the OK_CODE field, and consequently, the old field contents are transported. -
What is difference between abstraction and encapsulation ?
Hi,
I am trying to figure out the difference between abstraction and encapsulation but confused.
Both are used for data hiding then what is the exact difference ?
Thanks.Tushar-Patel wrote:
I am trying to figure out the difference between abstraction and encapsulation but confused.
Both are used for data hiding then what is the exact difference ?This is the picture I have:
When you encapsulate something you get an inside and an outside. The outside is the abstraction. It describes how the encapsulated entity behaves viewed from the outside. This is also called the type. Hidden inside is the implementation. It holds detail information about how the type's behaviour is accomplished.
It's a very simplified picture but I think it's quite accurate and it works for me. -
What is difference between Iterator and Collection Wrapper?
Hi all,
I dont understand the actual difference between Iterator and Collection Wrapper. I observed both are used for the same purpose. Could any one please let me know when to use Collection Wrapper and when to use Iterator??
Thanks,
Chinnu.L_Kiryl is right.
Collections support global iteration (through collection->get_next( )) and local iteration (through iterator->get_next( )).
Each collection has a focus object. Initially, the first object has the focus.
Any global iteration moves the focus, which is published by the event FOCUS_CHANGED of the collection.
If you want to iterate on the collection without moving the focus (and without triggering timeconsuming follow-up processes) you can use local iteration. To do so, request an iterator object from the collection and use this to iterate.
And one more advantage of using iterator: it takes care of deleted entities. If you use global iteration then when you reach deleted entity it will be an exception. But there is no exception with iterator in the same situation. -
What is difference between modify and update i am using
hi
what is difference between mofify and update
my requiremen is to have three condition checkec while mofifying or updating from a internal table
the three fields are
cus no
status
date these all are primary key in the database table
so which sould i use modify or update
there might be entry already existing in database table or new entry to be created if already existin it should check on the primary keys and updatat if not it should add a record
pls suggest whihc to use and how to implement the check on teh threee primary key
like if modify ztable from table it_test
now where condition ? can be used or not with modify? and if yes how
if not should i use update will update create a new entry if no entry is there and please give syntex
regards
AroraHi Nishant Arora,
Modify: It works in performing two actions.
They are: Insert + Update.
For Example If a record that is exited in database, so you are modifying that record, it updates that particular record.
Similarly, If the is not existed in the database, you are modifying it, it inserts a new record.
Update: Update means just it updates the status, I mean it only updates the record. It doesn't inserts any new record if that particular record is not present in the database.
These are the cases you need to write these statements.
Syntaxes: :
Go through this links please.,
http://help.sap.com/saphelp_nw04/helpdata/en/e7/968aa8b2384dd9835f91e7f8470064/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/fc/eb35eb358411d1829f0000e829fbfe/content.htm
Reward points if useful
Cheers,
Swamy Kunche
Edited by: Swamy Kunche on Jun 11, 2008 2:41 PM -
What is Difference between SXMB_MONI and SXMB_MONITOR?
what is Difference between SXMB_MONI and SXMB_MONITOR?
Can any explain to this question.please?Hello,
Both are same.
SXMB_MONI is area menu which will contain all multiple transactions pertaining to monitoring.
SXMB_MONI contains some functions viz monitoring for Bridging, Archived Msgs, Job overview, persistence layer analysis.
SXI_monitor directly leads to the message monitoring for the IS, which is part of the SXMB_MONI.
SXI_MONITOR directly executes the monitoring report.
Thanks,
Satya -
We’re seeing the following issue: sql - Can Oracle be forced to use the spatial index for sdo_filter in combination with an or clause? - Stack Overflow (posted by a colleague of mine) and are curious to know if this behaviour is due to a difference between standard and enterprise, or could we doing something else wrong in our DB config.?
We have also reproduced the issue on the following stacks:
Oracle SE One 11.2.0.3 (with Spatial enabled)
Redhat Linux 2.6.32-358.6.2.el6.x86_64 #1 SMP Thu May 16 20:59:36 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux
11.2.0.3.0 Standard Edition and 11.2.0.4.0 Standard Edition (both with Spatial enabled)
Microsoft Windows Server 2003R2 Standard x64 Edition
However, the SQL works fine if we try it on Oracle 11.2.0.3.0 *Enterprise* Edition.
Any help or advice would be much appreciated.
Kindest Regards,
KevinIn my experience sdo_filter ALWAYS uses the spatial index, so that's not the problem. Since you did not provide the explain plans, we can't say for sure but I think yhu is right: Standard Edition can't use the bitmap operations, and thus it'll take longer to combine the results of the two queries (because the optimizer will surely split this OR up in two parts, then combine them).
BTW: when asking questions about queries here, it would be nice if you posted the queries here as well, so that we do not have to check another website in order to see what you are doing. Plus it will probably get you more answers, because not everyone can be bothered to click on that link. It would also have been nice if you had posted your own answer on the other post here as well, because my recommendation would have been to use union all - but since you already found that out for yourself my recommendation would have been a little late.
Maybe you are looking for
-
Open_form with session causing deadlock after commit is applied in called form
Hi all, i am using forms 10g r2. i have two forms say A and B. I am calling form B from A using open_form built-in with session_mode is set to session. Form opening without error and i can update execute queries and insert records on both forms but.
-
Howto change DPI, without xorg.conf if possible?
So, once and for all I'd like to have DPI issue solved I want to have DPI set to 96. At this size fonts and everything seems at normal size, I don't want to argue about that... Practically, $ xdpyinfo | grep inch resolution: 121x121 dots per inch I w
-
Troubleshoot TC connectivity issues
My Time Capsule has worked great for over two years. All of the sudden, my MacBook Pro started having connectivity issues. Eventually (over about two weeks), the issues became a total lack of wi-fi internet in our household. I disconnected and pow
-
Load different content in same page
Hello, I am putting together a css site and have my css file working and an html file that sets up my page how I would like. however I don't have the nav bar working in an ideal fashion. Is it possible to have different content load into the content
-
OWA SSL Cert Replacement having issues
My SSL for OWA exchange 2010 expired. I generate a new CSR from the Exchange and submit it to my third party ssl company. I get the cert back, and complete the pending certificate request in the Exchange Management. Everything seems to go just fine,