Difference between brand-new 15" and 17"

What's the difference between the 2.4GHz 15" and 17" besides the 17" larger screen?
Does the 17" battery power last shorter than the 15" since it has a bigger screen to lid up?
thanks

17" uses CCFL for its backlight technology, where as the 15" uses LED.
As reported, the battery life is a little longer on the 15"
The 17" is a great machine with tons of screen real estate. Of course that large screen can be a double edged sword. If you fly a lot or travel, the 17" is more unwieldy. The trays on airlines are too small to comfortably accommodate such a large laptop.
Where the 17" shines in that if you do travel somewhat but want a desktop replacement.
Personally I like my 15" MBP besides use the price difference between the two models and get an iphone, the price delta almost pays for one

Similar Messages

What is the difference between the new ipad and ipad with retina display?

what is the difference between the new ipad and ipad with retina display???

This compares the two new iPads with the previous Retina iPad:
http://www.engadget.com/2012/10/23/ipad-mini-vs-2012-ipad-whats-different/
Regards.

HT3696 How to know if your mac is using the latest Haswell architecture processor or not? and how to know the difference between the new imac and the 2012/13 imac?

How to know if your mac is using the latest Haswell architecture processor or not? and how to know the difference between the new imac and the 2012/13 imac?

Sorry to reopen an old post, but I've just purchased a 2nd hand late-2013 iMac (or so thats what the seller said).
I'm always sceptical though, and just wanted to know if there is a way to check if my iMac is indeed the late-2013 model that included Haswell?
I've attached screenshots of the About This Mac section hoping it may help shed some light.
Thank you in advance for your help!
PS - I can't compare to the iMac specs link you posted above because its now showing the late-2014 models.
<Image Edited by Host to Remove Serial Number>

Difference between using new Date() and new Date(System.currentTimeMillis()

Hi All,
I have seen many open source api's where they are updating dates with the following code
new Date(System.currentTimeMillis())
when i print the new Date() it prints the same
what is the difference between using new Date() and new Date(System.currentTimeMillis()) ??
Thanks,
J.Kathir

when i print the new Date() it prints the same
It does because of backward compatability. This constructor exists in version 1.3.1 but not in newer versions.Really ? Please point me to where you read that.
API doc 1.5 : new Date() (still there, not even deprecated)
A quick look at the code for this constructor: /**
 * Allocates a <code>Date</code> object and initializes it so that
 * it represents the time at which it was allocated, measured to the
 * nearest millisecond.
 * @see java.lang.System#currentTimeMillis()
 public Date() {
 this(System.currentTimeMillis());
 }

Difference between the new iPad and iPad with ritna

What is the difference between the new iPad and iPad with ritna ?

This compares the two new iPads with the previous Retina iPad:
http://www.engadget.com/2012/10/23/ipad-mini-vs-2012-ipad-whats-different/
Regards.

What is the difference between on new focus and do prepare out put methods

Hi,
what is the difference between on new focus and do prepare out put methods.

Hi Divya,
DO_PREPARE_OUTPUT method is triggered each time the view is prepared after each event. Normally we redefine this method in order default the initial values based upon the parameter iv_first_time = 'X'. There can be certain other scenarios like putting data validations where this method can be helpful.
For details on ON_NEW_FOCUS, refer to this [thread|on_new_focus event;
Thanks
Vishal

What is the Difference between ? new Operator and Class.forName() ???

plz tel me ....
what is the Difference between ? new Operator and Class.forName() ??? ........

Class.forName(), takes the class name as parameter,
and loads that class in memory. But it doesn't create
any instance of that class.
That means static methods/variables are available for
use.
new keyword, checks if the class is loaded, if not
then loads that class, and then creates an instance
of that class.Class.forName actually returns the class object for that name (class - for -name). it might load it, if the class hasn't already been loaded, but it's misleading to say that's what that method does
your definition of 'new' is wrong, too. give the dukes back

Difference between At-new and on change of

Hi,
Can anyone send me the exact difference between At-new and On change of
Thank You
Santosh

Hi anjali,
I just entered your subject "difference between At-new and on change of" as search terms in the SEARCH FORUM input field.
Please check the results and come back after.
Difference between At new and On change of?
Posted on: 28.09.2006 19:01, by user: subhash soni -- Relevance: 100% -- Show all results within this thread
Hi What is the difference between At new and On change of? Thank You
difference between At-new and on change of
Posted on: 09.03.2007 20:16, by user: anjali nalluri -- Relevance: 89% -- Show all results within this thread
Hi, Can anyone send me the exact difference between At-new and On change of Thank You Santosh
Diff between AT new and on change of
Posted on: 30.11.2006 16:06, by user: Pavan Ravikanti -- Relevance: 53% -- Show all results within this thread
hi, can any one tell me what is the exact difference between AT new and on change of thanks pavan ...
Diff. between At New and On Change Of
Posted on: 05.10.2005 08:58, by user: surya mamtha -- Relevance: 48% -- Show all results within this thread
Hi, Could anybody exlain the difference between At New event and On Change Of event in detail? And how can we avoid the inner loops ...
Major Diff. Between On change of and At New
Posted on: 24.05.2006 12:48, by user: IFF -- Relevance: 46% -- Show all results within this thread
Hi Experts, Could you please let me know that what is the major difference between the control break statements On change of and At new. Which one is best to used ...
diff between at new and on change of
Posted on: 08.03.2007 16:27, by user: saroja ponnam -- Relevance: 44% -- Show all results within this thread
Hi all, what is the main diff between at new and on change of statements. Regards Saroja.
Differnce between AT NEW AND ON CHANGE OF
Posted on: 06.05.2006 10:55, by user: Raja Sekhar T -- Relevance: 44% -- Show all results within this thread
Hi, Differnce between AT NEW AND ON CHANGE OF Iam waiting foryour reply Thanks & Regards Raja Sekhar.T ...
Regards,
Clemens

In ical, how can you tell the difference between a meeting invite and email?

When you send a meeting invite in ical, does the recipient receive a different icon in their inbox to differentiate from an email?

For service stock you can't tell the difference between a new iPad and a refurbished one. Both will come in a plain brown box with the same pattern in model numbers. If you mean between a refurbished one and one new at retail, then other than the obvious difference in packaging, I've read that the model number on refurbished units starts with the letter "F", though I've not confirmed that.
Regards.

I did re-set my password and when I click on Install for Mavericks, I still get a box for "administrator password" and it still won't accept my new password. Is there a difference between my Apple ID and the administrator password they're asking for?

I downloaded Mavericks and it won't install. I did re-set my password and when I click on Install for Mavericks, I still get a box for "administrator password" and it still won't accept my new password. Is there a difference between my Apple ID and the administrator password they're asking for? I never had an administrator password-- I just hit enter and have never had a problem before with previous installations. I'm on an iMac, from 2007, running Mt. Lion (version 10.8.5). I've been looking for other's posts who may be having the same problem, but haven't found any. Can anyone help?

Ugh. The 'no password, no work' thing is a recent Apple development. I ran into it on my system and ended up having to do a clean install on a partition I fully erased.
I suppose, if you have the ability to, go online and look up how to burn a bootable DVD image. Download the 10.8.4 image then use the Disk Utility to make a boot image of it. You'll need a dual-layer DVD or a USB drive (or memory stick at least 8GB) If you've got an optical drive, burn the disk, if you've a USB device, use that.
Then get a pocket drive and copy your important files off the system or let Time Machine do a full backup.
When the backup is done, insert the disk and hold down the C key until the machine boots off of the DVD. At the point you get to the start window, go to the menu and choose the Disk Utility.
In the Disk Utility, reformat the drive. You go to the actual DRIVE (not the Macintosh HD, but the root above it that is the actual hard drive device)
I always do this and *partition* it into several volumes, the benefit being, you can store all of your music, documents and importans stuff on that secondary storage volume you make - it will have it's own index and then the first volume is where you put the OS and it will have it's own index as well. That way, if the OS throws a wobbler and you need to reinstall, you don't lose your data.
Depending on the size of your hard drive, it is good to give your OS partition at least 60GB and optimally 100GB, and the rest for storage.
Name your volumes, use the little box sliders to manually size them or put that number in the size window, select for the format, Mac OS Extended (Journaled) and hit Apply and then the Disk Utility will quickly create your new partitions.
Once finished, quit the Utility and it will return you to the OS installer. Select the volume you want to install to and it should start up and install.
Once the installation is done, you'll get the new machine startup then you MUST put in a password for the computer. Once you're in, and to the desktop, don't bother with any Mountain Lion updates, go right to the App Store and get the Mavericks update and let it install the app to your Applicaitons folder, then do that install.
On a side note, there MAY be a way to make a disk image from the Mavericks application and avoid the entire Mountain Lion step.. I honestly do not know, but a bit of hitting the search engines may find out if there is. I think that if you looked for "make Mavericks boot disk or boot image' you may find something.
Good luck!

Difference between At new and on change statement?

What is the difference between at new and on change statement? Please explain with an example.

hi
on change of differs from at new in the following respects:
It can be used in any loop construct, not just loop at. For example, it can be used within select and endselect, do and enddo, or while and endwhile, as well as inside get events.
A single on change of can be triggered by a change within one or more fields named after of and separated by or. These fields can be elementary fields or field strings. If you are within a loop, these fields do not have to belong to the loop.
When used within a loop, a change in a field to the left of the control level does not trigger a control break.
When used within a loop, fields to the right still contain their original values; they are not changed to contain zeros or asterisks.
You can use else between on change of and endon.
You can use it with loop at it where . . ..
You can use sum with on change of. It sums all numeric fields except the one(s) named after of.
Any values changed within on change of remain changed after endon. The contents of the header line are not restored as they are for at and endat.
REGARDS
PRASANTH

Difference between AT NEW and ON CHANGE

difference between AT NEW and ON CHANGE

HI,
at new is controlbreak statment and on change of is not and we can use onchange of out side the loop
and on at nnwe the left side feild change the event
trigers and the values become 0 and *
-->1.It can be used in any loop construct, not just loop at.
For example, it can be used within select and endselect, do
and enddo, or while and endwhile, as well as inside get events.
2. A single on change of can be triggered by a change within
one or more fields named after of and separated by or. These
fields can be elementary fields or field strings. If you are
within a loop, these fields do not have to belong to the loop.
3.When used within a loop, a change in a field to the left
of the control level does not trigger a control break.
4.When used within a loop, fields to the right still contain
their original values; they are not changed to contain zeros
or asterisks.
5.You can use else between on change of and endon.
6.You can use it with loop at it where . . ..
7. You can use sum with on change of. It sums all numeric
fields except the one(s) named after of.
8.Any values changed within on change of remain changed
after endon. The contents of the header line are not
restored as they are for at and endat
regards,
vineela.

Difference between AT NEW ..... and ON CHANGE events

difference between AT NEW and ON Change events..
Thanks

Hi
AT NEW
|{END OF} comp
Beginning or end of a group of lines with the same content in the component comp1 comp2 ... and in the components to the left of comp1 comp2 .... The components comp1 comp2 ... can be specified, as described in the section Specification of Components, with the limitation that access to object attributes is not possible here.
ON CHANGE OF
ON CHANGE OF dobj [OR dobj1 [OR dobj2] ... ].
statement_block
ENDON.
The statements ON CHANGE OF and ENDON, which are forbidden in classes, define a control structure that can contain a statement block statement_block. After ON CHANGE OF, any number of data objects dobj1, dobj2... of any data type can be added, linked by OR.
The first time a statement ON CHANGE OF is executed, the statement block is executed if at least one of the specified data objects is not initial. The statement block is executed for each additional execution of the same statement ON CHANGE OF, if the content of one of the specified data objects has been changed since the last time the statement ON CHANGE OF was executed.
For each time the statement ON CHANGE OF is executed, the content of all the specified data objects is saved as an auxiliary variable internally in the global system. The auxiliary variable is linked to this statement and cannot be accessed in the program. The auxiliary variables and their contents are retained longer than the lifetime of procedures. An auxiliary variable of this type can only be initialized if its statement ON CHANGE OF is executed while the associated data object is initial.
This control structure, which is forbidden in classes, is particularly prone to errors and should be replaced by branches with explicitly declared auxiliary variables.
example:-
Using AT FIRST , AT NEW, AT THE END OF , AT LAST.
DATA: BEGIN OF ITAB OCCURS 0,
 F1 TYPE I,
 F2(6) TYPE C,
 F3(10) TYPE N,
 F4(16) TYPE P DECIMALS 2,
 END OF ITAB.
DATA: SUB_TOT(10) TYPE P DECIMALS 3.
**--1
ITAB-F1 = 1.
ITAB-F2 = 'ONE'.
ITAB-F3 = 10.
ITAB-F4 = '1000.00'.
APPEND ITAB.
CLEAR ITAB.
ITAB-F1 = 1.
ITAB-F2 = 'ONE'.
ITAB-F3 = 20.
ITAB-F4 = '2000.00'.
APPEND ITAB.
CLEAR ITAB.
ITAB-F1 = 1.
ITAB-F2 = 'ONE'.
ITAB-F3 = 30.
ITAB-F4 = '3000.00'.
APPEND ITAB.
CLEAR ITAB.
*--2
ITAB-F1 = 2.
ITAB-F2 = 'TWO'.
ITAB-F3 = 10.
ITAB-F4 = '1000.00'.
APPEND ITAB.
CLEAR ITAB.
ITAB-F1 = 2.
ITAB-F2 = 'TWO'.
ITAB-F3 = 20.
ITAB-F4 = '2000.00'.
APPEND ITAB.
CLEAR ITAB.
*-- 3
ITAB-F1 = 3.
ITAB-F2 = 'THREE'.
ITAB-F3 = 10.
ITAB-F4 = '1000.00'.
APPEND ITAB.
CLEAR ITAB.
ITAB-F1 = 3.
ITAB-F2 = 'THREE'.
ITAB-F3 = 20.
ITAB-F4 = '2000.00'.
APPEND ITAB.
CLEAR ITAB.
SORT ITAB BY F1.
LOOP AT ITAB.
AT FIRST.
WRITE: /35 ' MATERIAL DETAILS:'.
ULINE.
ENDAT.
AT NEW F1.
WRITE: / 'DETAILS OF MATERIAL:' COLOR 7 , ITAB-F1.
ULINE.
ENDAT.
WRITE: / ITAB-F1, ITAB-F2, ITAB-F3, ITAB-F4.
SUB_TOT = SUB_TOT + ITAB-F4.
AT END OF F1.
ULINE.
WRITE: / 'SUB TOTAL :' COLOR 3 INVERSE ON, SUB_TOT COLOR 3 INVERSE ON.
CLEAR SUB_TOT.
ENDAT.
AT LAST.
SUM.
ULINE.
WRITE: 'SUM:', ITAB-F4.
ULINE.
ENDAT.
ENDLOOP.

DIFFERENCE BETWEEN "AT NEW " AND "AT FIRST" , "AT END OF" AND "AT LAST" ?

WHAT IS THE DIFFERENCE BETWEEN "AT NEW " AND "AT FIRST" , "AT END OF" AND "AT LAST" WITH REFERENCE TO CONTROL BREAK STATEMENTS ? PLEASE EXPLAIN IN DETAIL.
BEST REGARDS
RYAN.

Hi
i am sending you a simple program in which i had write program on that events
you can understand very easily
Using AT FIRST , AT NEW, AT THE END OF , AT LAST.
DATA: BEGIN OF ITAB OCCURS 0,
 F1 TYPE I,
 F2(6) TYPE C,
 F3(10) TYPE N,
 F4(16) TYPE P DECIMALS 2,
 END OF ITAB.
DATA: SUB_TOT(10) TYPE P DECIMALS 3.
**--1
ITAB-F1 = 1.
ITAB-F2 = 'ONE'.
ITAB-F3 = 10.
ITAB-F4 = '1000.00'.
APPEND ITAB.
CLEAR ITAB.
ITAB-F1 = 1.
ITAB-F2 = 'ONE'.
ITAB-F3 = 20.
ITAB-F4 = '2000.00'.
APPEND ITAB.
CLEAR ITAB.
ITAB-F1 = 1.
ITAB-F2 = 'ONE'.
ITAB-F3 = 30.
ITAB-F4 = '3000.00'.
APPEND ITAB.
CLEAR ITAB.
*--2
ITAB-F1 = 2.
ITAB-F2 = 'TWO'.
ITAB-F3 = 10.
ITAB-F4 = '1000.00'.
APPEND ITAB.
CLEAR ITAB.
ITAB-F1 = 2.
ITAB-F2 = 'TWO'.
ITAB-F3 = 20.
ITAB-F4 = '2000.00'.
APPEND ITAB.
CLEAR ITAB.
*-- 3
ITAB-F1 = 3.
ITAB-F2 = 'THREE'.
ITAB-F3 = 10.
ITAB-F4 = '1000.00'.
APPEND ITAB.
CLEAR ITAB.
ITAB-F1 = 3.
ITAB-F2 = 'THREE'.
ITAB-F3 = 20.
ITAB-F4 = '2000.00'.
APPEND ITAB.
CLEAR ITAB.
SORT ITAB BY F1.
LOOP AT ITAB.
AT FIRST.
WRITE: /35 ' MATERIAL DETAILS:'.
ULINE.
ENDAT.
AT NEW F1.
WRITE: / 'DETAILS OF MATERIAL:' COLOR 7 , ITAB-F1.
ULINE.
ENDAT.
WRITE: / ITAB-F1, ITAB-F2, ITAB-F3, ITAB-F4.
SUB_TOT = SUB_TOT + ITAB-F4.
AT END OF F1.
ULINE.
WRITE: / 'SUB TOTAL :' COLOR 3 INVERSE ON, SUB_TOT COLOR 3 INVERSE ON.
CLEAR SUB_TOT.
ENDAT.
AT LAST.
SUM.
ULINE.
WRITE: 'SUM:', ITAB-F4.
ULINE.
ENDAT.
ENDLOOP.
Using AT FIRST , AT NEW, AT THE END OF , AT LAST.
DATA: BEGIN OF ITAB OCCURS 0,
 F1 TYPE I,
 F2(6) TYPE C,
 F3(10) TYPE N,
 F4(16) TYPE P DECIMALS 2,
 END OF ITAB.
DATA: SUB_TOT(10) TYPE P DECIMALS 3.
**--1
ITAB-F1 = 1.
ITAB-F2 = 'ONE'.
ITAB-F3 = 10.
ITAB-F4 = '1000.00'.
APPEND ITAB.
CLEAR ITAB.
ITAB-F1 = 1.
ITAB-F2 = 'ONE'.
ITAB-F3 = 20.
ITAB-F4 = '2000.00'.
APPEND ITAB.
CLEAR ITAB.
ITAB-F1 = 1.
ITAB-F2 = 'ONE'.
ITAB-F3 = 30.
ITAB-F4 = '3000.00'.
APPEND ITAB.
CLEAR ITAB.
*--2
ITAB-F1 = 2.
ITAB-F2 = 'TWO'.
ITAB-F3 = 10.
ITAB-F4 = '1000.00'.
APPEND ITAB.
CLEAR ITAB.
ITAB-F1 = 2.
ITAB-F2 = 'TWO'.
ITAB-F3 = 20.
ITAB-F4 = '2000.00'.
APPEND ITAB.
CLEAR ITAB.
*-- 3
ITAB-F1 = 3.
ITAB-F2 = 'THREE'.
ITAB-F3 = 10.
ITAB-F4 = '1000.00'.
APPEND ITAB.
CLEAR ITAB.
ITAB-F1 = 3.
ITAB-F2 = 'THREE'.
ITAB-F3 = 20.
ITAB-F4 = '2000.00'.
APPEND ITAB.
CLEAR ITAB.
SORT ITAB BY F1.
LOOP AT ITAB.
AT FIRST.
WRITE: /35 ' MATERIAL DETAILS:'.
ULINE.
ENDAT.
AT NEW F1.
WRITE: / 'DETAILS OF MATERIAL:' COLOR 7 , ITAB-F1.
ULINE.
ENDAT.
WRITE: / ITAB-F1, ITAB-F2, ITAB-F3, ITAB-F4.
SUB_TOT = SUB_TOT + ITAB-F4.
AT END OF F1.
ULINE.
WRITE: / 'SUB TOTAL :' COLOR 3 INVERSE ON, SUB_TOT COLOR 3 INVERSE ON.
CLEAR SUB_TOT.
ENDAT.
AT LAST.
SUM.
ULINE.
WRITE: 'SUM:', ITAB-F4.
ULINE.
ENDAT.
ENDLOOP.
Reward if usefull

How can I tell the differences between the new MacBook Pro with retina display and the old MacBook Pro with retina display by looking

I'm just wondering the differences between the new MacBook Pro with retina display which was just released in October 2013 and the old MacBook Pro with retina display.

Thank you for the reply! As you said they looked exactly the same, so I'm not able to tell the differences just by looking, right? I'm thinking to buy a new 13-inch MacBook Pro with retina display, but I'm not buying the MacBook in Apple Store, I'm buying it in other shops, how can know whether they are not selling me the old model of MacBook Pro with retina display?

Difference between brand-new 15" and 17"

Similar Messages

Maybe you are looking for