Difference between BRF and BRF plus

Hi
Is there any difference between BRF and BRF plus. Please give me any documents.
Regards
Venkatesh

Hi
Steve.
Thankyou for your information.
Can you give me any documents on BRFplus how to use the all expressions and Ruleset.
Thankyou
Venkat

Similar Messages

Difference between WorkItem and WorkItem plus interact

Dear experts,
What is the difference Difference between WorkItem and WorkItem plus interact
Cheers,
M.

Hi
Steve.
Thankyou for your information.
Can you give me any documents on BRFplus how to use the all expressions and Ruleset.
Thankyou
Venkat

Would there be a problem with the warranty in the UK if bought in USA? Plus is there a big difference between US and UK keyboards? Thanks

Hi, I'm from the UK and in the USA for a week. I'm thinking of purchasing an Air. Would there be a problem with the warranty in the UK if bought in the US? Plus is there a big difference between US and UK keyboards?
Cheers
G

There are subtle differences on a British layout, mainly having to do with the top line (shift numbers), to permit the use of European monetary symbols. There are a few other keys different (note the enter key).
Here are the basic layouts. Obviously the MBA won't have an eject key, as the power key resides in that location.
British English Keyboard
USA English Keyboard

Can Oracle be forced to use the spatial index for sdo_filter in combination with an or clause? Difference between Enterprise and SE?

We’re seeing the following issue: sql - Can Oracle be forced to use the spatial index for sdo_filter in combination with an or clause? - Stack Overflow (posted by a colleague of mine) and are curious to know if this behaviour is due to a difference between standard and enterprise, or could we doing something else wrong in our DB config.?
We have also reproduced the issue on the following stacks:
Oracle SE One 11.2.0.3 (with Spatial enabled)
Redhat Linux 2.6.32-358.6.2.el6.x86_64 #1 SMP Thu May 16 20:59:36 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux
11.2.0.3.0 Standard Edition and 11.2.0.4.0 Standard Edition (both with Spatial enabled)
Microsoft Windows Server 2003R2 Standard x64 Edition
However, the SQL works fine if we try it on Oracle 11.2.0.3.0 *Enterprise* Edition.
Any help or advice would be much appreciated.
Kindest Regards,
Kevin

In my experience sdo_filter ALWAYS uses the spatial index, so that's not the problem. Since you did not provide the explain plans, we can't say for sure but I think yhu is right: Standard Edition can't use the bitmap operations, and thus it'll take longer to combine the results of the two queries (because the optimizer will surely split this OR up in two parts, then combine them).
BTW: when asking questions about queries here, it would be nice if you posted the queries here as well, so that we do not have to check another website in order to see what you are doing. Plus it will probably get you more answers, because not everyone can be bothered to click on that link. It would also have been nice if you had posted your own answer on the other post here as well, because my recommendation would have been to use union all - but since you already found that out for yourself my recommendation would have been a little late.

Difference between servlet and filter

difference between servlet and filter

Its not a secret you know; if you just read a little about what they are used for, you answer your own question plus many more to follow.
Servlet: http://en.wikipedia.org/wiki/Java_Servlet
Filter: http://www.oracle.com/technetwork/java/filters-137243.html

Difference between CHAR and VARCHAR2 datatype

Difference between CHAR and VARCHAR2 datatype
CHAR datatype
If you have an employee name column with size 10; ename CHAR(10) and If a column value 'JOHN' is inserted, 6 empty spaces will be inserted to the right of the value. If this was a VARCHAR column; ename VARCHAR2(10). How would it handle the column value 'JOHN' ?

The CHAR datatype stores fixed-length character strings, and Oracle compares CHAR values using blank-padded comparison semantics.
Where as the VARCHAR2 datatype stores variable-length character strings, and Oracle compares VARCHAR2 values using nonpadded comparison semantics.
This is important when comparing or joining on the columns having these datatypes;
SQL*Plus: Release 10.2.0.1.0 - Production on Pzt Au 6 09:16:45 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> conn hr/hr
Connected.
SQL> set serveroutput on
SQL> DECLARE
2 last_name1 VARCHAR2(10) := 'TONGUC';
3 last_name2 CHAR(10) := 'TONGUC';
4 BEGIN
5 IF last_name1 = last_name2 THEN
6 DBMS_OUTPUT.PUT_LINE ( '-' || last_name1 || '- is equal to -' || last_name2
|| '-');
7 ELSE
8 DBMS_OUTPUT.PUT_LINE ( '-' || last_name1 || '- is NOT equal to -' || last_n
ame2 || '-');
9 END IF;
10 END;
11 /
-TONGUC- is NOT equal to -TONGUC -
PL/SQL procedure successfully completed.
SQL> DECLARE
2 last_name1 CHAR(6) := 'TONGUC';
3 last_name2 CHAR(10) := 'TONGUC';
4 BEGIN
5 IF last_name1 = last_name2 THEN
6 DBMS_OUTPUT.PUT_LINE ( '-' || last_name1 || '- is equal to -' || last_name2
|| '-');
7 ELSE
8 DBMS_OUTPUT.PUT_LINE ( '-' || last_name1 || '- is NOT equal to -' || last_n
ame2 || '-');
9 END IF;
10 END;
11 /
-TONGUC- is equal to -TONGUC -
PL/SQL procedure successfully completed.
Also you may want to read related asktom thread - "Char Vs Varchar" http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:1542606219593
and http://tahitiviews.blogspot.com/2007/05/less-is-more-more-or-less.html
Best regards.

Difference between BAPI and IDocs

hello all
what is difference between BAPI and IDocs

Hi,
BAPI
One of the big plusses for BAPIs is that the interface and function are not supposed to change. This is a big plus when you do upgrades or hot packs because the transaction can change (format, required inputs etc) which means you then need to update the call transaction.
Some of the BAPIs are better documented and easier to use than others. You usually need to perform the BAPI that actually does the COMMIT after you call your BAPI.
The Program coding for calling a BAPI is usually cleaner than setting up the screen flow etc for the Call Transaction.
You don't need to worry about special data circumstances interrupting the normal data flow of the screens and causing errors because of that.
BAPIs probably have better performance since they don't do the screen flow processing.
In general if the BAPI exists for the transaction you want to perform and you can figure out how to use it the BAPI is probably the best way to go.
BAPIs are a subset of the RFC-enabled function modules, especially designed as Application Programming Interface (API) to the SAP business object, or in other words: are function modules officially released by SAP to be called from external programs.
IDOC
IDocs are text encoded documents with a rigid structure that are used to exchange data between R/3 and a foreign system. Instead of calling a program in the destination system directly, the data is first packed into an IDoc and then sent to the receiving system, where it is analyzed and properly processed. Therefore an IDoc data exchange is always an
asynchronous process. The significant difference between simple RFC-calls and IDoc data exchange is the fact, that every action performed on IDocs are protocolled by R/3 and IDocs can be reprocessed if an error occurred in one of the message steps.
While IDocs have to be understood as a data exchange protocol, EDI and ALE are typical use cases for IDocs. R/3 uses IDocs for both EDI and ALE to deliver data to the receiving system. ALE is basically the scheduling mechanism that defines when and between which partners and what kind of data will be exchanged on a regular or event triggered basis. Such a set-up is called an ALE-scenario.
The philosophical difference between EDI and ALE can be pinned as follows: If we send data to an external partner, we generally speak of EDI, while ALE is a mechanism to reliable replicate data between trusting systems to store a redundant copy of the IDoc data. The difference is made clear, when we think of a purchase order that is sent as an IDoc. If we send the purchase order to a supplier then the supplier will store the purchase order as a sales order. However, if we send the purchase order via ALE to another R/3 system, then the receiving system will store the purchase order also as a purchase order.
Regards,
Bhaskar

Differences between mcp and mcp t sound

this is all sound sound info direct from a man at nvidia who knows
PLEASE NOTE ONLY MCP2-T BOARD MSI DO AT THE MOMMENT IS THE K7N2G-ILSR
The MCP has no hardware support for audio of any kind, period. Windows and the CPU do all the audio work on that part and there is absolutely no DSP, NVIDIA or otherwise, in that chip to help out. Try to do EAX, any kind of reverb or chorus, or a music preset on those boards and you'll see the CPU usage climb. Ditto if you add more voices to the mix: CPU usage goes up.
The MCP-T has a full hardware audio DSP, hardware acceleration for 2D and 3D streams, and Dolby Digital encode support. EQs, HRTFs, and all environmental settings are exposed and modifiable by the user. None of this is available on the soft solutions due to the heavy hit on the CPU if they were enabled.
Short of that, you can try to use the ASIO or OpenAL drivers. You'll find that neither will work on the MCP because there is no supporting hardware for them. In short, there is no way to coax an MCP to be an APU capable part, the support simply isn't in the chip
Here's the chip differences:
MCP has the following:
- ATA-133 x 2 ports
- USB 1.0/1.1/2.0 x 6 ports
- NVIDIA MAC 10/100 x 1 port
- Legacy I/O bus (PS2, Printer, Serial)
- AC 97 host based audio (no DSP)
MCP-T includes the above and adds the following:
- 3Com MAC 10/100 x 1 port
- 1394A Firewire MAC x 3 ports
- NVIDIA APU with Dolby Digtal Encoder

thats not to say mcp is bad as this proves
The MCP2 is definately hardware sound. As far as the APU goes the only difference between MCP2 and MCP2-T is the T version has Soundstorm(Dolby Digital). Basically Mcp2-T =5.1 digital output capabilities Mcp2 no digital output, analogue output only. The other differences are the T version Has Dual Lan support and a firewire controller which the plain MCP2 does not. Here are my cpu utilization test results from Audio winbench proving that The MCP2 APU is a hardware APU.
http://www.nforcershq.com/forum/viewtopic.php?p=28870#28870
to see the test he ran ,will not copy /paste
MSI K7N2-L Mainboard
Athlon XP 2000+ Retail cooler
MSI Geforce3 TI 200
1Gig (2x512) Kingston pc2700 Ram
Maxtor DiamondMax Plus 9 8meg cache 80 gig
WD 600BB 60 gig
Onboard Nforce 2 APU (no soundstorm
just to explain differences

What is the difference between tkprof and explainplan

Hi,
what is the difference between tkprof and explainplan.

Execution Plans and the EXPLAIN PLAN Statement
Before the database server can execute a SQL statement, Oracle must first parse the statement and develop an execution plan. The execution plan is a task list of sorts that decomposes a potentially complex SQL operation into a series of basic data access operations. For example, a query against the dept table might have an execution plan that consists of an index lookup on the deptno index, followed by a table access by ROWID.
The EXPLAIN PLAN statement allows you to submit a SQL statement to Oracle and have the database prepare the execution plan for the statement without actually executing it. The execution plan is made available to you in the form of rows inserted into a special table called a plan table. You may query the rows in the plan table using ordinary SELECT statements in order to see the steps of the execution plan for the statement you explained. You may keep multiple execution plans in the plan table by assigning each a unique statement_id. Or you may choose to delete the rows from the plan table after you are finished looking at the execution plan. You can also roll back an EXPLAIN PLAN statement in order to remove the execution plan from the plan table.
The EXPLAIN PLAN statement runs very quickly, even if the statement being explained is a query that might run for hours. This is because the statement is simply parsed and its execution plan saved into the plan table. The actual statement is never executed by EXPLAIN PLAN. Along these same lines, if the statement being explained includes bind variables, the variables never need to actually be bound. The values that would be bound are not relevant since the statement is not actually executed.
You don’t need any special system privileges in order to use the EXPLAIN PLAN statement. However, you do need to have INSERT privileges on the plan table, and you must have sufficient privileges to execute the statement you are trying to explain. The one difference is that in order to explain a statement that involves views, you must have privileges on all of the tables that make up the view. If you don’t, you’ll get an “ORA-01039: insufficient privileges on underlying objects of the view” error.
The columns that make up the plan table are as follows:
Name Null? Type
STATEMENT_ID VARCHAR2(30)
TIMESTAMP DATE
REMARKS VARCHAR2(80)
OPERATION VARCHAR2(30)
OPTIONS VARCHAR2(30)
OBJECT_NODE VARCHAR2(128)
OBJECT_OWNER VARCHAR2(30)
OBJECT_NAME VARCHAR2(30)
OBJECT_INSTANCE NUMBER(38)
OBJECT_TYPE VARCHAR2(30)
OPTIMIZER VARCHAR2(255)
SEARCH_COLUMNS NUMBER
ID NUMBER(38)
PARENT_ID NUMBER(38)
POSITION NUMBER(38)
COST NUMBER(38)
CARDINALITY NUMBER(38)
BYTES NUMBER(38)
OTHER_TAG VARCHAR2(255)
PARTITION_START VARCHAR2(255)
PARTITION_STOP VARCHAR2(255)
PARTITION_ID NUMBER(38)
OTHER LONG
DISTRIBUTION VARCHAR2(30)
There are other ways to view execution plans besides issuing the EXPLAIN PLAN statement and querying the plan table. SQL*Plus can automatically display an execution plan after each statement is executed. Also, there are many GUI tools available that allow you to click on a SQL statement in the shared pool and view its execution plan. In addition, TKPROF can optionally include execution plans in its reports as well.
Trace Files and the TKPROF Utility
TKPROF is a utility that you invoke at the operating system level in order to analyze SQL trace files and generate reports that present the trace information in a readable form. Although the details of how you invoke TKPROF vary from one platform to the next, Oracle Corporation provides TKPROF with all releases of the database and the basic functionality is the same on all platforms.
The term trace file may be a bit confusing. More recent releases of the database offer a product called Oracle Trace Collection Services. Also, Net8 is capable of generating trace files. SQL trace files are entirely different. SQL trace is a facility that you enable or disable for individual database sessions or for the entire instance as a whole. When SQL trace is enabled for a database session, the Oracle server process handling that session writes detailed information about all database calls and operations to a trace file. Special database events may be set in order to cause Oracle to write even more specific information—such as the values of bind variables—into the trace file.
SQL trace files are text files that, strictly speaking, are human readable. However, they are extremely verbose, repetitive, and cryptic. For example, if an application opens a cursor and fetches 1000 rows from the cursor one row at a time, there will be over 1000 separate entries in the trace file.
TKPROF is a program that you invoke at the operating system command prompt in order to reformat the trace file into a format that is much easier to comprehend. Each SQL statement is displayed in the report, along with counts of how many times it was parsed, executed, and fetched. CPU time, elapsed time, logical reads, physical reads, and rows processed are also reported, along with information about recursion level and misses in the library cache. TKPROF can also optionally include the execution plan for each SQL statement in the report, along with counts of how many rows were processed at each step of the execution plan.
The SQL statements can be listed in a TKPROF report in the order of how much resource they used, if desired. Also, recursive SQL statements issued by the SYS user to manage the data dictionary can be included or excluded, and TKPROF can write SQL statements from the traced session into a spool file.
How EXPLAIN PLAN and TKPROF Aid in the Application Tuning Process
EXPLAIN PLAN and TKPROF are valuable tools in the tuning process. Tuning at the application level typically yields the most dramatic results, and these two tools can help with the tuning in many different ways.
EXPLAIN PLAN and TKPROF allow you to proactively tune an application while it is in development. It is relatively easy to enable SQL trace, run an application in a test environment, run TKPROF on the trace file, and review the output to determine if application or schema changes are called for. EXPLAIN PLAN is handy for evaluating individual SQL statements.
By reviewing execution plans, you can also validate the scalability of an application. If the database operations are dependent upon full table scans of tables that could grow quite large, then there may be scalability problems ahead. On the other hand, if large tables are accessed via selective indexes, then scalability may not be a problem.
EXPLAIN PLAN and TKPROF may also be used in an existing production environment in order to zero in on resource intensive operations and get insights into how the code may be optimized. TKPROF can further be used to quantify the resources required by specific database operations or application functions.
EXPLAIN PLAN is also handy for estimating resource requirements in advance. Suppose you have an ad hoc reporting request against a very large database. Running queries through EXPLAIN PLAN will let you determine in advance if the queries are feasible or if they will be resource intensive and will take unacceptably long to run.

Difference between 32DT2U1 and 32DT2UL1?

Before I involve Toshiba tech support, anyone know the difference between 32DT2U1 and 32DT2UL1? I have the latter, and can't find hide nor hair of a mention on the support site, but can find some limited information on the non-L part number.
It's a nice 32" set, fine picture, abysmal "Media Player" (I wouldn't have bothered adding the USB port for photos only, myself), but I was hoping to find a "real" manual (the "Easy Setup Guide" doesn't exactly tell you anything useful about the ) and maybe a complete spec sheet...
Solved!
Go to Solution.

If your looking for a manual here is the .pdf of it for your model. http://cdgenp01.csd.toshiba.com/content/support/manuals/userguides/su2979064/32C110U_40E210U_46G310U... It has much more information than what came with the tv..
Personally they should of had a download for the manual. How they have it sucks, printer friendly, should of been a button to download manual.. But it is viewable on-line, a plus.

What is the main difference between menu_exits and user_exits

what is the main difference between menu_exits and user_exits

Hi,
User Exits:
A user exit is a three character code that instructs the system to access a program during system processing.
SXX: S is for standard exits that are delivered by SAP. XX represents the 2-digit exit number.
UXX: U is for user exits that are defined by the user. XX represents the 2-digit exit number
Menu Exits:
Menu exits add items to the pulldown menus in standard SAP applications. You can use these menu items to call up your own screens or to trigger entire add-on applications.
SAP creates menu exits by defining special menu items in the Menu Painter. These special entries have function codes that begin with "+" (a plus sign). You specify the menu items text when activating the item in an add-on project.
Regards,
Priyanka.

Difference between SUNWCXall and SUNWCall

Hi All,
While making Flash Archive for installation, the one question has come on my mind but not getting ;
what is difference between SUNWCXall and SUNWCall.....?
regards,
dhanik

This is from Solaris 8 Advanced Install Guide (couldn't find this in Solaris 10 docs):
http://docs.sun.com/app/docs/doc/806-0957/6ja9c6gbq?l=en&a=view#preparecustom-ix478
Solaris 8 Installation Collection >> Solaris 8 Advanced Installation Guide >> 6. Preparing Custom JumpStart Installations >> Creating a Profile
Entire Distribution
SUNWCall
Entire Distribution Plus OEM Support
SUNWCXall

Difference between fl and flash libraries?

(new to cs3 - java expert...)
I'm trying to write some action script to set the default
focus of a text component when the applications run...
It seems there is a fl.managers.FocusManager that
could/should do it... but for some reason, I cannot import that
package into my AS. I can import an arbitrary
flash.<something>.somthing.
Question - In the AS editor, there is a menu (plus sign (+)
icon) with all(?) the available packages/classes, languange
constructs, etc. Should I be able to use them all? Is there a
difference between "fl" and "flash" - assuming "fl" is for Flash
just like the product logo "fl"?
thanks a bunch.

Craig,
> Is there a difference between "fl" and "flash" -
assuming "fl"
> is for Flash just like the product logo "fl"?
The fl packages are top level classes based on ECMAScript,
while the
flash packages are specifically Flash Player APIs.
> for some reason, I cannot import
[fl.managers.FocusManager]
> into my AS
Are you writing timeline-based code, or a class file? Have
you tried
the sample code shown in the FocusManager entry of the
ActionScript 3.0
Language Reference?
David Stiller
Adobe Community Expert
Dev blog,
http://www.quip.net/blog/
"Luck is the residue of good design."

Difference between Null and null?

What is the difference between null and NULL?
When is each used?
Thanks,

veryConfused wrote:
There is a null in java, but no NULL. null means no value. However, when assigning value, the following is different:Although the empty String has no special role. Null means, the referential type is not assigned (doesn't refer) to a specific object. The empty String is just another object though, so seeing it or pointing it out as something special when it actually isn't at all (no more special than new Integer(0) or new Object[0]) just adds to the confusion.

Difference between GUI_UPLOAD and WS_UPLOAD

Hi,
Please make me clear about the difference between GUI_UPLOAD and WS_UPLOAD. In which cases we need to use these modules...??
Thanks,
Satish

I would suggest to always use the GUI_UPLOAD. I say this because this is the function module which is used in the GUI_UPLOAD method of the class CL_GUI_FRONTEND_SERVICES.   Really, you should probably use the class/method instead of the function module.
data: filename type string.
filename = p_file.
call method cl_gui_frontend_services=>gui_upload
         exporting
              filename                = filename
              filetype                = 'ASC'
         changing
              data_tab                = iflatf
         exceptions
              file_open_error         = 1
              file_read_error         = 2
              no_batch                = 3
              gui_refuse_filetransfer = 4
              no_authority            = 6
              unknown_error           = 7
              bad_data_format         = 8
              unknown_dp_error        = 12
              access_denied           = 13
              others                  = 17.
Regards,
Rich Heilman

Difference between BRF and BRF plus

Similar Messages

Maybe you are looking for