Difference between BSP_WD_CMPWB and SE80/BSP Application

Hi Guys,
This is related to SAP CRM Module.
Can somebody tell the difference between BSP_WD_CMPWB and SE80 / BSP Applications.
Also can somebody give the tutorial for BSP_WD_CMPWB.
Thanks,

post this in CRM web forum at
SAP CRM: Interaction Center

Similar Messages

Difference between debug and run the application in adf

Hi,
my application working properly to fetch the data from viewobjects using dynamic viewcriteria while debugging it but not working properly when running the application....
Please tell me what the problem its urgent...
Thanks in Advance...

Hi,
LEAVE PROGRAM always leaves the current program - there is never any processing after LEAVE PROGRAM !
While If you use the EXIT statement within an event block but not in a loop, the system stops processing the block immediatelyand If the EXIT statement occurs inside a DO, WHILE, or LOOP loop, it is the loop that terminates, not the processing block.
I think it will help you.
regards,
Lokesh

Statefull and stateless Bsp application

Hi All,
Plz tell me What is the difference between Statefull and stateless Bsp applications.
Thanks.
Regards,
Pooja Joshi.

hi
good
go through this link,this would help you to solve your problem.
http://www.sap-press.de/download/dateien/933/sap_press_bsp_programming.pdf
thanks
mrutyun^

Difference between ITS and Web Application Server

Hi All,
What is ITS server. Can anyone explain me the difference between ITS and WAS(Web Application Server)
Thanks
Harpreet

Hi Harpreet:
ITS is basically the tool that allow you to use SAP via http. Theres lots of info about <a href="http://help.sap.com/saphelp_nw04/helpdata/en/0d/654d356560054ce10000009b38f889/frameset.htm">ITS</a> or <a href="http://help.sap.com/saphelp_nw04s/helpdata/en/5f/0ef441ad7bc417e10000000a155106/frameset.htm">WebAS with Integrated ITS</a>
The ITS is a standalone application connected to R3 via RFC connection, In the SAP WebAS the ITS is integrated to the system.
Hope this help!
Juan
PS: Please reward with points if helpful

Difference between closing and minimising?

What is the difference between closing and minimising an application on a Mac?
I am new to Macs and on Windows 'close' actually closes and quits the app and 'minimise', err, minimises it to the task bar.
On a Mac close and minimise seem to do roughly the same thing. Close does not shut down the
app, quit does! So why would I close and not minimise or vice-versa?
I'm confused!!

Use minimize when you don't want to lose what's in a current window, but you do want to get it off your desktop for the moment because you need something else that's there. So it's minimized to the dock. For example, you're in Safari, but you're working in Word too, and you need space for a couple of Word's windows, so you put Safari into the background by minimizing it.
You close a window when you're done with it. You don't need what's in it anymore, but you're not done with the program that created it. Say you're in Word editing a document, you print it, you save it, and now you're done with it. So you close it. But unlike Windows, that doesn't make it quit Word, because you were actually going to work on another document, and if Word closed you'd have to launch it all over again.
When you're done with a window, you close it. When you're done with an application, you quit it. When you want to temporarily move a window off your desktop, you minimize it.
You can also hide an application's windows using command-H. It's still running, but all its windows are gone until you click on the application's dock icon again.
Hope that helps.

What is the difference between apps and applications?

I have an application that I've been running on my older Mac. Now that I have a new MacBook Pro, I have to reinstall new software that is compatible. When I go to the vendor website I see an application I can download or a link to the Mac App Store. Is an application different than an app? When should you download them from a vendor website and when should you go to the app store? Do apps end up in the Launchpad and an application in your Applications folder? I can't seem to find information on what is the distinction. Are they actually two different things? Any help would be appreciated.

No difference between apps and applications. If you download the app from the Apple AppsStore you have better security and a conveninet place to have all your downloads. Nothing wrong with downloading from a trusted developer though.
EDIT: Yes they will either wind up in your Download folder as a .dmg you will have to double-click on to install, or most app store apps will install to your Applications folder.

Application difference between jdic and jdicplus

Hi,
what is difference between jdic and jdicplus.. In my application i used jdic for integrating flash with java. Now i would like to change jdicplus. Is it correct move..?
Pl tel the advantages of jdicplus..

saranv wrote:
what is difference between jdic and jdicplus...Is it correct move..?I suspect that if you have to ask the question, the answer is probably: Not yet.
Winston

The difference between Lion and Mountain Lion

Can some one explain to me the difference between Lion and Mtn Lion? I'm currently 10.6.8 Is it beneficiall for me to upgrade?

Mountain Lion is an enhanced version of previous OS X and so that is Mavericks.
About upgrading it all depends on what your needs are and if your hardware supports it.
System requirements for OS X Lion
System requirements for OS X Mountain Lion
OS X Mavericks: System Requirements
Please check also applications compatibility. From Lion onward, you cannot run PPC application.

Difference between BAPI and RFC?

Difference between BAPI and RFC?
also where to use BAPI and where to use RFC?

Hi,
BAPI are RFC enabled function modules. the difference between RFc and BAPI are business objects. You create business objects and those are then registered in your BOR (Business Object Repository) which can be accessed outside the SAP system by using some other applications (Non-SAP) such as VB or JAVA. in this case u only specify the business object and its method from external system in BAPI there is no direct system call. while RFC are direct system call Some BAPIs provide basic functions and can be used for most SAP business object types. These BAPIs should be implemented the same for all business object types. Standardized BAPIs are easier to use and prevent users having to deal with a number of different BAPIs. Whenever possible, a standardized BAPI must be used in preference to an individual BAPI.
The following standardized BAPIs are provided:
Reading instances of SAP business objects
GetList ( ) With the BAPI GetList you can select a range of object key values, for example, company codes and material numbers.
The BAPI GetList() is a class method.
GetDetail() With the BAPI GetDetail() the details of an instance of a business object type are retrieved and returned to the calling program. The instance is identified via its key. The BAPI GetDetail() is an instance method. BAPIs that can create, change or delete instances of a business object type
The following BAPIs of the same object type have to be programmed so that they can be called several times within one transaction. For example, if, after sales order 1 has been created, a second sales order 2 is created in the same transaction, the second BAPI call must not affect the consistency of the sales order 2. After completing the transaction with a COMMIT WORK, both the orders are saved consistently in the database.
Create( ) and CreateFromData! ( )
The BAPIs Create() and CreateFromData() create an instance of an SAP business object type, for example, a purchase order. These BAPIs are class methods.
Change( )
The BAPI Change() changes an existing instance of an SAP business object type, for example, a purchase order. The BAPI Change () is an instance method.
Delete( ) and Undelete( ) The BAPI Delete() deletes an instance of an SAP business object type from the database or sets a deletion flag.
The BAPI Undelete() removes a deletion flag. These BAPIs are instance methods.
Cancel ( ) Unlike the BAPI Delete(), the BAPI Cancel() cancels an instance of a business object type. The instance to be cancelled remains in the database and an additional instance is created and this is the one that is actually canceled. The Cancel() BAPI is an instance method.
Add<subobject> ( ) and Remove<subobject> ( ) The BAPI Add<subobject> adds a subobject to an existing object inst! ance and the BAPI and Remove<subobject> removes a subobject from an object instance. These BAPIs are instance methods.
Regards,
Prakash

Difference Between HashMap and HashTable

Difference Between HashMap and HashTable
Please explain with an example

I have a situation in Java Collection and i am not
able to figure a good solution. I am scared about the
performance and memory that wil be used
I have 5 List objects with thousands and thousands of
records in it. The List is populated by a database
query using jdbcTemplate which return like 200,000
records
Each record is identified by POLICY_ID. They may be
List with multiple records for a POLICY_ID
I want to extract each POLICY_ID from all the 5 List
and make a single List object for each POLICY_ID and
for each List and pass it to a print job which will
print the data for a POLICY_ID
Example
Let say we have POLICY_ID = 15432
List1 has one record for 15432
List2 has one record for 15432
List3 has one record for 15432
List4 has three record for 15432
List5 has three record for 15432
From the 200,000 records in List1 i want to generate
a seperate list with 1 record for policy id 15432 and
let name is Listperpolicy
after this logic we have
Listperpolicy1
Listperpolicy2
Listperpolicy3
Listperpolicy4
Listperpolicy5
call print job ( Listperpolicy1, Listperpolicy2,
Listperpolicy3, Listperpolicy4, Listperpolicy5)
Please let me know
Thanks a Lotttttttttdon't worry about performance until you've got a working application. second-guessing what the performance bottlenecks will be is futile

Difference between upgrdae and migration about oracle database

Difference between upgrdae and migration about oracle database
please give the comments

Well, the question is almost philosophic... 
In 9i, there is a Migration Guide whereas in 10g there is a Upgrade Guide. 
Furthermore, in 9i, there is the command line startup migrate whereas in 10g that's startup upgrade.
Somebody think upgrade when go to new release, and migration when go to new version. 
Others think upgrade when new version replace database in place, and migration when new version include a move of database. 
Another point of view is : upgrade is for technical, and migration for application/data. 
 
Well, after these explanations, your upgrade/migratation notion will not be more clear, but I think that is not very important, only a terminology game. The most important is to know what you need : new version or new release. 
 
Nicolas.

Difference between DOWNLOAD and GUI_DOWNLOAD

hi
let me know the difference between DOWNLOAD and GUI_DOWNLOAD and giv me clear idea of wat and wat not should be done with respect to conversion from download to gui_Download??????
give me clear process of putting my download data into my own defined file name .. during manual and backgrnd job. process..
thanks inadvance

Hi Shaik,
DOWNLOAD function module is obsolete now and DOWNLOAD as well as WS_DOWNLOAD should be replaced by GUI_DOWNLOAD function module.
The only matter you need to be careful off is mapping the parameters correctly.
Also, you have asked "during manual and backgrnd job. process.. " , well GUI_DOWNLOAD or any download module for downloading to Presentation server CANNOT be used in the background.
Because background work processes are run on application server level and do not have access to the desktop of any PS.
For downloading to the presentation server essentially, pass the contents of internal table to DATA_TAB tables parameter and pass the presentation server file name to FILENAME importing parameter.
Cheers,
Aditya

Difference Between BAPI And RFC in ABAP

Hi,
i want to know difference between BAPI and RFC in SAP,
can we call SAP GUI screen from NON SAP System Using BAPI.
Reg,
Hariharan

Hi Ravishankar,
The difference is not importat while you understand the concept.
I think, RFC is the protocol for calling functions from external systems in R/3.
I understand like BAPI a series of complet functions that SAP offers you for use and model a business use.
But if I need program a function that can be called for external system i would call it RFC_NAME, because is a unique function that makes a single task.
In other words, the difference i think is about work idea more than another thing.
RFC
A remote function call is a call to a function module running in a system different from the caller's. The remote function can also be called from within the same system (as a remote call).
RFC consists of two interfaces : A calling interface for ABAP Programs and a calling interface for Non-SAP programs.
The RFC Interface takes care of :-
- Converting all parameter data to the representation needed in the remote system
Calling the communication routines needed to talk to the remote system.
Handling communications errors, and notifying the caller, if desired ( using EXCEPTIONS paramater of the CALL FUNCTION).
BAPI
BAPIs are standardized programming interfaces (methods) enabling external applications to access business processes and data in the R/3 System.
BAPIs provide stable and standardized methods to achieve seamless integration between the R/3 System and external applications, legacy systems and add-ons.
BAPIs are defined in the BOR(Business object repository) as methods of SAP business object types that carry out specific business functions.
BAPIs are implemented as RFC-enabled function modules and are created in the Function Builder of the ABAP Workbench.
The most critical difference btwn BAPI and FM is that BAPI can be wrapped in Business objects whereas RFC cant.
BAPI are RFC enabled function modules. the difference between RFc and BAPI are business objects. You create business objects and those are then registered in your BOR (Business Object Repository) which can be accessed outside the SAP system by using some other applications (Non-SAP) such as VB or JAVA. in this case u only specify the business object and its method from external system in BAPI there is no direct system call. while RFC are direct system call Some BAPIs provide basic functions and can be used for most SAP business object types. These BAPIs should be implemented the same for all business object types. Standardized BAPIs are easier to use and prevent users having to deal with a number of different BAPIs. Whenever possible, a standardized BAPI must be used in preference to an individual BAPI.
The following standardized BAPIs are provided:
Reading instances of SAP business objects
GetList ( ) With the BAPI GetList you can select a range of object key values, for example, company codes and material numbers.
The BAPI GetList() is a class method.
GetDetail() With the BAPI GetDetail() the details of an instance of a business object type are retrieved and returned to the calling program. The instance is identified via its key. The BAPI GetDetail() is an instance method. BAPIs that can create, change or delete instances of a business object type
The following BAPIs of the same object type have to be programmed so that they can be called several times within one transaction. For example, if, after sales order 1 has been created, a second sales order 2 is created in the same transaction, the second BAPI call must not affect the consistency of the sales order 2. After completing the transaction with a COMMIT WORK, both the orders are saved consistently in the database.
Create( ) and CreateFromData! ( )
The BAPIs Create() and CreateFromData() create an instance of an SAP business object type, for example, a purchase order. These BAPIs are class methods.
Change( )
The BAPI Change() changes an existing instance of an SAP business object type, for example, a purchase order. The BAPI Change () is an instance method.
Delete( ) and Undelete( ) The BAPI Delete() deletes an instance of an SAP business object type from the database or sets a deletion flag.
The BAPI Undelete() removes a deletion flag. These BAPIs are instance methods.
Cancel ( ) Unlike the BAPI Delete(), the BAPI Cancel() cancels an instance of a business object type. The instance to be cancelled remains in the database and an additional instance is created and this is the one that is actually canceled. The Cancel() BAPI is an instance method.
Add<subobject> ( ) and Remove<subobject> ( ) The BAPI Add<subobject> adds a subobject to an existing object inst! ance and the BAPI and Remove<subobject> removes a subobject from an object instance. These BAPIs are instance methods.
Check these Links out
http://searchsap.techtarget.com/ateQuestionNResponse/0,289625,sid21_cid558752_tax293481,00.html
http://www.sap-img.com/abap/interview-question-on-bapi-rfc-abap-objects-tables.htm
http://www.sap-img.com/fu033.htm
http://www.sap-img.com/abap/ale-bapi.htm
Refer following SDN threads:
Diff. Between BAPI and RFC
Re: BAPI and RFC
Hope this resolves your query.
Reward all the helpful answers.
Regards

Difference between BBP_GET_STATUS_2 and CLEAN_REQREQ_UP reports

Could someone explain in simple way what is the difference between BBP_GET_STATUS_2 and CLEAN_REQREQ_UP reports? I have read the differences in standard documentation but it is a little confusing.
Thanks!
Regards,
Madhur

Hi
CLEAN_REQREQ_UP (Cleaner Job)
You can use this function for document types Shopping cart, (Local) Purchase Order, Confirmation, and Invoice to trigger a synchronization with the associated documents in the back-end system. The system checks whether and how the (follow-on) documents were posted in the back end, and updates the object link and references, as well as the document status.
A job (background processing) is generated for the program CLEAN_REQREQ_UP. When this is run, the system queries a database table containing the transfer information of the documents to the back end. The entries are checked with the data of the respective back-end systems. If the back-end transfer is successful, the respective entries are deleted and the prerequisites for further processing are created.
BBP_GET_STATUS2 (Status Job)
The status job was created by SAP to update the EBP system with data such as purchase requisition number, purchase order number, goods received or invoices recorded manually in R/3, etc. The report should not be run on a frequent basis at short intervals unless the order count from EBP to R/3 is not that high. Otherwise, a recommended interval for running the report is approximately every hour. Basically the schedule times depend on your business requirements.
Until this job runs, the user will not see the number of the backend document created in R/3 for a particular shopping cart in the history tab of the check status transaction.
Some more information :
Go to:
SPRO->IMG->Integration with Other SAP components->Advanced Planning and
Optimization->basic Settings for the Data Transfer->Change Transfer->
change Transfer for Transaction Data->Active Online Transfer using BTE
Here you should maintain the application 'SRMNTY' with active flag.
Once this customizing is enabled, whenever a follow-on document
(either confirmation or invoice) for an extended classic PO is created
in the backend R/3 system, the R/3 system communicates to the SRM system
by creating an entry in the table BBP_DOCUMENT_TAB for this PO.
The item level of the SRM PO has fields to store the actual quantity
and values entered for the corresponding confirmations and invoices.
After that, run the reports CLEAN_REQREQ_UP and BBP_GET_STATUS_2.
When the report CLEAN_REQREQ_UP runs this will update the
PO with statistical information. With the latest information in
BBP_PDIGP table (statistical information) the query should work fine.
Summer

What is the difference between ERP2004 and SAP 47 Enterprise?

Currently we have SAP 47 Enterprise with WAS 6.2. I understand ERP2004 is NW and 6.4 sp9. Can any one please let me know the major difference between ERP2004 and SAP 4.7 Enterprise ( more from abap / workflow view)?
Thanks
Swamy

From Abap point of view some of the major add-on in erp2004,netwever :
1) Development of webdynpro studio for java development for portal and iviews.
2) Major abap development uses Abap object oriented methodology, rathet hten old conventional Abap,i.e MVC model (Model,View,Controller) where in it uses concept of classes,interfaces,etc.
3) Advanced BSP tech using MVC model to develop web based modules
4) It is closesly integrated with web-based CRM and BW/APO

Difference between BSP_WD_CMPWB and SE80/BSP Application

Similar Messages

Maybe you are looking for