Difference between BW7.0 and BI7.3

Hi all,
1.Whats is the difference between bw 7.0 and BI 7.3?
2. we are using BI 7.3 , have to know that is there any limitations of using BI 7.3 . We are extracting the data from multiprovider to Open hub Destination? Is there any disadvantage ?
Please gudie me on this...

Hi,
Some of the features of 7.3:
Major Step on enterprise Data warehousing scalability and flexibility
BW accelerator: SAddditional performance
Integration improvements with SAP Business Objects Data Services.
Open Hub Services:
1) Info spoke functions have been removed the infospoke and open hub monitor functions previously located under Tools-Open hub services. These functions are now obsolete due to the introduction of open hub destination.
2) One can now extract data in ASCII and XML when using a file as a destination. You can now select either the default setting or direct input as the codepage setting.
3)It is no longer possible to create new Infospokes.One can still use, display and change or delete existing Infospokes.It is recommended switching to the new Open hub destination concept.With the data transfer process and transformation, the Open hub destinationprovides all of the functions offered by Infospokes and thus replace the Infospoke concept.
Please find some of the links which may be helpful for you.
<link farm removed by moderator>
Regards,
PRS
Edited by: Siegfried Szameitat on Sep 28, 2011 9:38 AM

Similar Messages

  • Difference between bi3.5 and bi7.0

    hi all,
    can anyone tell me the difference between bi3.5 and bi7.0.

    I would start here...
    http://help.sap.com/saphelp_nw04s/helpdata/en/a4/1be541f321c717e10000000a155106/content.htm
    BR Ondrej

  • Difference between BW3.5 and BW7

    Hi,
    I am very new to BW7, can u tell me what is the difference between BW3.5 and BW7.
    My client wants BW7, I don’t have any knowledge on Bw7 with out training can I implement the project because I have bw3.5 knowledge ,
    Can u forward any documentation regarding this ( bw7 ) ,
    Can you send me the  step – by – step procedure of bw 7 .
    Thank u
    Jashaik
    My Id : [email protected]

    Hi Shaik,
    Check this for what's new in NW2004s BI:
    http://help.sap.com/saphelp_nw2004s/helpdata/en/a4/1be541f321c717e10000000a155106/content.htm
    Also check these links for BI 7.0:
    https://www.sdn.sap.com/irj/sdn/docs?rid=/webcontent/uuid/9280fb2d-0a01-0010-0f80-f33ab5c1606d [original link is broken]
    https://www.sdn.sap.com/irj/sdn/docs?rid=/webcontent/uuid/93eaff2d-0a01-0010-d7b4-84ac0438dacc [original link is broken]
    Frequently Asked Questions  in SAP NW 7.0 - Enterprise Data Warehousing, Reporting, Query & Analysis and Business Planning [original link is broken]
    check this:
    http://help.sap.com/saphelp_nw2004s/helpdata/en/b2/e50138fede083de10000009b38f8cf/frameset.htm
    Also see:
    SAP Service Marketplace at
    http://help.sap.com/NW2004s
    http://service.sap.com/bi
    BI in SAP NetWeaver 2004s -> BI Capabilities folder
    for documents on the new features and also some presentations
    Bye
    Dinesh

  • Differences between BW3.5 and BW7.0 Realtime Data Acquisition

    Hi,
    Could any one explain me clearly the differences between BW3.5 and BW7.0 for Realtime Data Acquisition  and also steps for creating it in BW7.0.
    Eagerly waiting for your reply. Thanks in advance
    Anan

    You have to create tranformation in between your DSO and datasource.
    If u have not done init of delta earlier, create Standard DTP and schedule init load.
    If you did already, create or convert(if standard DTP already exists) Real time DTP. Now create infopckage with realtime field enable, and follow the steps of my blog on demanon from here onwards.
    check the below link to know more abt BI 2004s modeling steps:
    BI 7

  • Difference between workbench request and customizing request in transport

    Hi Experts,
    I am new to SAP BI7 work. i am having basic doubt in Transort request creations
    ususally we create  the requests to transport the objects from Development  system to further systems.
    can anyone please clarify me,  what is the main defference between the Workbench request and Customizing request.
    Thanks and Regards
    Mrudula

    Hi ,
           The Transport Organiser maintains Change Requests.These requests record the changes made to the repository and customizing objects.Based on that objects changed they are
    1)WorkBench Request & 2) Customizing Request.
    Workbench Requests are those that involve changes to cross-client Customising and Repository Objects. The objects are independent of the client.Hence the requests are used for transferring and transporting changed Repository objects and changed system settings from cross-client tables.
    Customizing Requests involve changes recorded to client-specific Customizing objects .These client specific requests are used for copying and transporting changed system settings from client-specific tables.
    Refer this links http://www.allinterview.com/showanswers/57910.html
    customising and workbench request
    Difference between Customizing request and Workbench request
    and many more threads available on this.
    Regards,
    Rahul.

  • What is difference between sy-tabix and sy-index.

    SAP Seniors,
    Can you please let me know what is difference between sy-index and sy-tabix.
    I read the SAP help, it is confusing for me. it looks like both are same from help. please help me.
    Thank you
    Anitha.

    HI,
        Here is a brief description of difference between SY_TABIX and SY_INDEX and using them with several conditions.
    SY-TABIX
    Current line of an internal table. SY-TABIX is set by the statements below, but only for index tables. The field is either not set or is set to 0 for hashed tables.
    APPEND sets SY-TABIX to the index of the last line of the table, that is, it contains the overall number of entries in the table.
    COLLECT sets SY-TABIX to the index of the existing or inserted line in the table. If the table has the type HASHED TABLE, SY-TABIX is set to 0.
    LOOP AT sets SY-TABIX to the index of the current line at the beginning of each loop lass. At the end of the loop, SY-TABIX is reset to the value that it had before entering the loop. It is set to 0 if the table has the type HASHED TABLE.
    READ TABLE sets SY-TABIX to the index of the table line read. If you use a binary search, and the system does not find a line, SY-TABIX contains the total number of lines, or one more than the total number of lines. SY-INDEX is undefined if a linear search fails to return an entry.
    SEARCH <itab> FOR sets SY-TABIX to the index of the table line in which the search string is found.
    SY-INDEX
    In a DO or WHILE loop, SY-INDEX contains the number of loop passes including the current pass.
    Hope this helps.
    Thank you,
    Pavan.

  • Difference between sy-tabix and sy-index?

    tell me about sy-tabix and sy-index?what is the difference between sy-tabix and sy-index?
    Moderator Message: Please search before posting. Read the [Forum Rules Of Engagement |https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement] for further details.
    Edited by: Suhas Saha on Jun 18, 2011 5:33 PM

    HI,
        Here is a brief description of difference between SY_TABIX and SY_INDEX and using them with several conditions.
    SY-TABIX
    Current line of an internal table. SY-TABIX is set by the statements below, but only for index tables. The field is either not set or is set to 0 for hashed tables.
    APPEND sets SY-TABIX to the index of the last line of the table, that is, it contains the overall number of entries in the table.
    COLLECT sets SY-TABIX to the index of the existing or inserted line in the table. If the table has the type HASHED TABLE, SY-TABIX is set to 0.
    LOOP AT sets SY-TABIX to the index of the current line at the beginning of each loop lass. At the end of the loop, SY-TABIX is reset to the value that it had before entering the loop. It is set to 0 if the table has the type HASHED TABLE.
    READ TABLE sets SY-TABIX to the index of the table line read. If you use a binary search, and the system does not find a line, SY-TABIX contains the total number of lines, or one more than the total number of lines. SY-INDEX is undefined if a linear search fails to return an entry.
    SEARCH <itab> FOR sets SY-TABIX to the index of the table line in which the search string is found.
    SY-INDEX
    In a DO or WHILE loop, SY-INDEX contains the number of loop passes including the current pass.
    Hope this helps.
    Thank you,
    Pavan.

  • What is difference between sy-index and sy-tabix and where both are using ?

    what is difference between sy-index and sy-tabix and where both are using ?

    hi nagaraju
    sy-tabix is in Internal table, current line index. So it can only be used while looping at the internal table.
    sy-index is in Loops, number of current pass. This you can use in other loop statements also (like do-enddo loop, while-endwhile)
    SY-INDEX is a counter for following loops: do...enddo, while..endwhile
    SY-TABIX is a counter for LOOP...ENDLOOP, READ TABLE...
    Here is an example from which you can understand the difference between sy-tabix and sy-index.
    Itab is an internal table with the following data in it.
    id Name
    198 XYZ
    475 ABC
    545 PQR.
    loop at itab where id > 300.
    write :/ itab-id, itab-name , sy-tabix, sy-index.
    endloop.
    My output will be :
    475 ABC 2 1
    545 PQR 3 2
    Sy-tabix is the index of the record in internal table.
    sy-index gives the no of times of loop passes.
    So, for the first record in the output (475 ABC), 2 is the index of the record in internal table and as it is first time loop pass occured, sy-index value is 1.
    Regards,
    navjot
    award points

  • The difference between chapter markers and dvd studio pro markers

    Does anyone know what is the difference between chapter markers and dvd studio pro markers? I can not find anywhere on Google. Also in the tutorials I have seen, suggesting DVD Studio Pro markers, but it did not mention the chapter markers.
    Thanks,

    "Adding Chapter and Compression Markers to Your Sequence
    Once you have your edited sequence or program finished, you can add markers to the sequence for use on DVD. Markers are reference points you can place within clips or sequences that identify specific frames. There are two kinds of markers you can add that directly relate to authoring a DVD—chapter markers and compression markers.
    • Chapter markers allow DVD authoring applications to create a navigable chapter list for your exported QuickTime movie. Chapter markers force MPEG keyframes (known as I-frames) at their location, since the DVD specification requires an I-frame at each chapter point.
    • Compression markers identify areas of abrupt change and include two types: those that are automatically inserted by Final Cut Pro at all edit points, and those you manually place in the clip or sequence. Like chapter markers, compression markers force I-frames at their location, although in this case it is for better quality encoding, and they are not used to create a chapter list.
    Note: When you export a QuickTime movie, you have an option to export various kinds of markers, including compression, chapter, or DVD Studio Pro markers. *When you choose to export DVD Studio Pro markers, Final Cut Pro actually exports chapter markers and all compression markers.* This includes compression markers you set manually, as well as ones created automatically by Final Cut Pro at edit and transition points."
    From the Final Cut Pro User Manual.
    So, JS was right the first time

  • The difference between an iphone and an ipod touch?

    i want to know if the difference between an iphone and an ipod touch is just that the iphone is like a phone that has internet and is a phone. or what else is it?

    The iPhone includes the same as an iPod Touch but also includes a phone, a camera, and a GPS radio.
    In addition to having internet access via wi-fi, the iPhone also has internet access via the cellular network, so as long as you have cellular reception with the iPhone, you have access to the internet in addition to having access via an available wi-fi network.

  • The difference between system restore and last good known configuration

    hi,
    what is the difference between system restore  and last good known configuration.
    in which situation you use system restore ,and in which situation you use last good known configuration.
    very short answer wil be enough.
    thanks
    johan
    h.david

    Last Known Good Configuration deals only with Starting Windows eg. a bad registry or incorrect driver is preventing Windows to start.It recovers the registry settings of HKEY_LOCAL_MACHINE\System\CurrentControlSet
    While System Restore uses restore points to return your system files and settings to an earlier point in time without affecting personal files. Restore points are created automatically every week, and just before significant system events, such as the installation
    of a program or device driver. You can also create a restore point manually.You can undone system restore but there is no such option in Last Known Good Configuration.
    Last Known Good Configuration is disabled in Windows 8 or,Windows 8.1 by default.
    Try using Last Known Good Configuration if you can't start Windows, but it started correctly the last time you turned on the computer.
    Try using System Restore to return the system to an earlier point in time when things worked correctly.
    S.Sengupta, Windows Entertainment and Connected Home MVP

  • Difference between sy-datum and any given date

    Dear Friends;
    I have one query  regarding DATE  I wanna calculate the difference between
    SY-DATUM and ANY GIVEN DATE . Is there any function or code available that take one parameter as sy-datum and another parameter as any given date and give result as no. of days between them
    Regards;
    Parag

    DATA: DATEDIFF TYPE P.
    CALL FUNCTION 'SD_DATETIME_DIFFERENCE'
      EXPORTING
        date1                 = '20071122'
        time1                 = '000001'
        date2                 = '20070905'
        time2                 = '000001'
    IMPORTING
       DATEDIFF               = DATEDIFF
    EXCEPTIONS
       INVALID_DATETIME       = 1
       OTHERS                 = 2.
    Greetings,
    Blag.

  • Difference between sy-uline and uline

    Hi All,
    Any one of you please update me what is the difference between sy-uline and uline. Also when i give sy-uline in top-of-page event it gives error.
    Thanks
    sankar

    with ULINE u can specify the position from where the ULINE should start
    corresponds to WRITE AT 3(10) SY-ULINE.
    ULINE AT 3(10) NO-GAP will supress the spacess after the under line
    ex :  1
    uline at 4(10).
    write : / 'My Program'.
    uline at 4(10).
    ex : 2
    write : 'My Program' , sy-uline.

  • Difference between sy-datum and sy-datlo

    difference between sy-datum and sy-datlo

    hi,
    The GET TIME statement synchronizes the time on the application server with the time on the database server and writes it to the field SY-UZEIT. SY-DATUM and the system fields for the local timezone (SY-TIMLO, SY-DATLO, and SY-ZONLO) are also reset. 
    SY-DATLO
    User’s local date, for example 19981129, 19990628, …
    SY-DATUM
    Current application server date, for example 19981130, 19990627, …
    SY-DAYST
    X during summertime, otherwise space. 
    SY-FDAYW
    Factory calendar day of the week: Monday = 1 … Friday = 5.
    SY-TIMLO
    User’s local time, for example 154353, 225312, …
    SY-TZONE
    Time difference in seconds between local time and Greenwich Mean Time (UTC), for example, 
    360, 10800.
    SY-UZEIT
    Current application server time. for example 164353, 215312, …
    SY-ZONLO
    User’s time zone, for example, EST, UTC, …
    reward points if useful

  • What is the difference between Topic Keywords and Index File Keywords?

    What is the difference between Topic Keywords and Index File Keywords? Any advantages to using one over the other? Do they appear differently in the generated index?
    RH9.0.2.271
    I'm using Webhelp

    Hi there
    When you create a RoboHelp project you end up with many different ancillary files that are used to store different bits of information. Many of these files bear the name you assigned to the project at the time you created it. The index file has the project name and it ends with a .HHK file extension. (HHK meaning HTML Help Keywords)
    Generally, unless you change RoboHelp's settings, you add keywords to this file and associate topics to the keywords via the Index pod. At the time you compile a CHM or generate other types of output, the file is consulted and the index is built.
    As I said earlier, the default is to add keywords to the Index file until you configure RoboHelp to add the keywords to the topics themselves. Once you change this, any keyword added will become a META tag in the topic code. If your keyword is BOFFO, the META tag would look like this:
    <meta name="MS-HKWD" content="BOFFO" />
    When the help is compiled or generated, the Index (.HHK) file is consulted as normal, but any topics containing keywords added in this manner are also added to the Index you end up with. From the appearance perspective, the end user woudn't know the difference or be able to tell. Heck, if all you ever did was interact with the Index pod, you, as an author wouldn't know either. Well, other than the fact that the icons appear differently.
    Operationally, keywords added to the topics themselves may hold an advantage in that if you were to import these topics into other projects, the Index keywords would already be present.
    Hopefully this helps... Rick

Maybe you are looking for