Difference between consignment and subcontract
hi,
Could anybody tell me what is the difference between consignment and subcontract?
Thanks a lot!
Dear Lauliu,
Under Consignment - there are vendor consignment and customer consignment categories.
Vendor consignment:In consignment processing, the vendor provides materials and stores them on your premises. The vendor remains the legal owner of the material until you withdraw materials from the consignment stores. Only then does the vendor require payment. The invoice is due at set periods of time, for example, monthly. In addition, you can also arrange with the vendor that you take over ownership of the remaining consignment material after a certain period of time.
http://help.sap.com/erp2005_ehp_05/helpdata/EN/4d/2b8f4c43ad11d189410000e829fbbd/frameset.htm
http://help.sap.com/erp2005_ehp_05/helpdata/EN/c6/af3c415e5dde2be10000000a1550b0/frameset.htm
Customer Consignment: http://help.sap.com/bestpractices/BBLibrary/HTML/J58_CustConsProc_EN_KO.htm
Sub-contracting: this can be operation sub-contracting/External Processing and product sub-contracting.
Regards
Mangalraj.S
Similar Messages
-
Which is difference between Pipeline and Consignment..
Hello All...
I need your help... Can you help me to understand the difference between Pipeline and Consignment?
Many thanks and I appreciate your Help and comments!A pipeline material is a material that flows directly into the production process from a pipeline (for example, oil), from a pipe (for example, tap water), or from another similar source (for example, electricity).
A material from the pipeline is always available; i.e. it can be withdrawn from the pipeline at any time and in any quantity.
Depending on the system configuration, a material can be withdrawn only from the pipeline or, in addition to the pipeline, normal stocks of the material can also be managed.
STEPS TO MAINTAIN PIPELINE MATERIAL
1. You can create a material with PIPE material type or else you can use any material type but that should allow pipeline process.
2. You should have Inforecord for the material with valid conditions, price will pick only from inforecord.
3. If requied you can maintains ource list or else you can select during goods issue.
4. From the Inventory Management menu, choose Goods movement ® Goods issue.
Maintain the data on the initial screen. Choose Movement type ® Consumption ® To cost center (or To order, To network, All account assignments) ® From pipeline (Movement types : 201 P, 261 P, 281 P, or 291 P)
5. On the collective entry screen, enter the account assignment. Enter the items.
You do not have to enter the vendor as this will be found automatically by the system.
If more than one vendor is possible, a pop-up window appears with a list of pipeline vendors, from which you can select the vendor you require.
Post the goods movement.
we can not stock pipeline material. It is readily available. directlly it is avilable at cost center. you need to pay for that consumption -
Difference between 122 and 161 movement type
Hi,
Can anyone explain me the difference between 122 and 161 movement type?
How will be the finance postings?
Can these movement types will be used in outbound delivery? If so,what kind of scenarios this can be used?
Thanks
SriniHi
Both are belongs to vendor return
1. 122 - return to vendor -total consignment - return total received gr qty
Migo - return delivery with 122- j1is - credit memo
2. 161 - here you have to crate the return po. return to vendor for partial qty.
after po- gr - j1is-credit memo
Laxman -
Whats the Difference Between BOM and Components??
Hi all,
I tried to create a SubContracting PO,i found BOM and Components in Item <b>Tab</b>
but if i click components and BOM same data details exists,then whats the difference between component and BOM??
and also Pls give me method of Creating PO with BOM
Thanks a lot in advanceDear Veeranna Chavadi,
This is some infirmation about BOM in PO subcontract
1) The purchasing department processing time defined for the plant
2) The planned delivery time from the material master record or purchasing info record
3) The delivery date
4) The goods receipt processing time from the material master record
For Ex:
Processing time Planned del. GR processing
Purchasing time time
Release PO Delivery Date
date date date required
Date required: 10.09.2007
GR processing time: 2 days (working days)
Planned delivery time: 10 days (calendar days)
Purchasing dept processing time: 2 days (working days)
Requirement date less GR processing time, planned delivery time, and purchasing department processing time.
Hope you understand, this is as per the SAP help.
what happen to u r query, if BOM is exploding please close this thread as answered
Hope this helps you
Prem. -
Difference between Null and null?
What is the difference between null and NULL?
When is each used?
Thanks,veryConfused wrote:
There is a null in java, but no NULL. null means no value. However, when assigning value, the following is different:Although the empty String has no special role. Null means, the referential type is not assigned (doesn't refer) to a specific object. The empty String is just another object though, so seeing it or pointing it out as something special when it actually isn't at all (no more special than new Integer(0) or new Object[0]) just adds to the confusion. -
Difference between GUI_UPLOAD and WS_UPLOAD
Hi,
Please make me clear about the difference between GUI_UPLOAD and WS_UPLOAD. In which cases we need to use these modules...??
Thanks,
SatishI would suggest to always use the GUI_UPLOAD. I say this because this is the function module which is used in the GUI_UPLOAD method of the class CL_GUI_FRONTEND_SERVICES. Really, you should probably use the class/method instead of the function module.
data: filename type string.
filename = p_file.
call method cl_gui_frontend_services=>gui_upload
exporting
filename = filename
filetype = 'ASC'
changing
data_tab = iflatf
exceptions
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
no_authority = 6
unknown_error = 7
bad_data_format = 8
unknown_dp_error = 12
access_denied = 13
others = 17.
Regards,
Rich Heilman -
Difference between char and varchar, also the difference between varchar2
Hi,
Can anyone explain me the difference between char and varchar, and also the difference between varchar and varchar2...Varchar2 is variable width character data type, so if you define column with width 20 and insert only one character to tis column only, one character will be stored in database. Char is not variable width so when you define column with width 20 and insert one character to this column it will be right padded with 19 spaces to desired length, so you will store 20 characters in the dattabase (follow the example 1). Varchar data type from Oracle 9i is automaticlly promoted to varchar2 (follow example 2)
Example 1:
SQL> create table tchar(text1 char(10), text2 varchar2(10))
2 /
Table created.
SQL> insert into tchar values('krystian','krystian')
2 /
1 row created.
SQL> select text1, length(text1), text2, length(text2)
2 from tchar
3 /
TEXT1 LENGTH(TEXT1) TEXT2 LENGTH(TEXT2)
krystian 10 krystian 8
Example 2:
create table tvarchar(text varchar(10))
SQL> select table_name,column_name,data_type
2 from user_tab_columns
3 where table_name = 'TVARCHAR'
4 /
TABLE_NAME COLUMN_NAME DATA_TYPE
TVARCHAR TEXT VARCHAR2
Best Regards
Krystian Zieja / mob -
The difference between Lion and Mountain Lion
Can some one explain to me the difference between Lion and Mtn Lion? I'm currently 10.6.8 Is it beneficiall for me to upgrade?
Mountain Lion is an enhanced version of previous OS X and so that is Mavericks.
About upgrading it all depends on what your needs are and if your hardware supports it.
System requirements for OS X Lion
System requirements for OS X Mountain Lion
OS X Mavericks: System Requirements
Please check also applications compatibility. From Lion onward, you cannot run PPC application. -
The difference between N80 and N80IE ?
What is the difference between M80 and N80ie?
02-Jan-2007
07:45 PM
korngear wrote:
The Nokia N80 Internet Edition is a new version of this handset with the same hardware as the normal N80. It is due for release in Q4 of 2006 and will be available in Patina Bronze or Pearl Black, and has the following additional software included.
Yahoo Go! for Mobile
Flickr
Some Amazon Branded Software
'Download!' App management
Internet Telephone - SIP VOIP Frontend
WLAN Wizard
Gizmo VOIP - Gizmo Project VOIP Frontend.
\\en.wikipedia.org//
@Korngear
Thanks.
Could N80 be upgraded to N80IE? -
The difference between SFP+ and X2
Dear Expert,
I need to know what is the difference between SFP+ and X2! and can I use SFP+ card and module instead of X2?
Thanks,
Mohammad SaeedHi,
They are both used for 10Gig interfaces. The difference is the connector type.
SFP+ is LC and X2 is SC.
You can not put an SFP+ into an X2 slot or X2 optic into a SFP+.
HTH -
Difference between ok_code and sy-ucomm
Hi,
Can any one tell me the difference between ok_code and sy-ucommHi,
Actually OK_CODE and SY-Ucomm are the same. But experts suggest use of OK code for following reason:
In each PAI event that a user triggers by choosing either a pushbutton on the screen or an element in a GUI status, the corresponding function code is placed into the system field SYST-UCOMM or SY-UCOMM and placed in the OK_CODE field (as long as the function code is not empty). Empty function codes are placed in neither the SY-UCOMM field nor the OK_CODE field.
In your ABAP programs, you should work with the OK_CODE field instead of SY-UCOMM. There are two reasons for this: Firstly, the ABAP program has full control over fields declared within it, and secondly, you should never change the value of an ABAP system field. However, you should also always initialize the OK_CODE field in an ABAP program for the following reason:
In the same way that the OK_CODE field in the ABAP program and the system field SY-UCOMM receive the contents of the corresponding screen fields in the PAI event, their contents are also assigned to the OK_CODE screen field and system field SYST-UCOMM in the PBO event. Therefore, you must clear the OK_CODE field in the ABAP program to ensure that the function code of a screen is not already filled in the PBO event with an unwanted value. This is particularly important when the next PAI event can be triggered with an empty function code (for example, using ENTER). Empty function codes do not affect SY-UCOMM or the OK_CODE field, and consequently, the old field contents are transported. -
What is difference between abstraction and encapsulation ?
Hi,
I am trying to figure out the difference between abstraction and encapsulation but confused.
Both are used for data hiding then what is the exact difference ?
Thanks.Tushar-Patel wrote:
I am trying to figure out the difference between abstraction and encapsulation but confused.
Both are used for data hiding then what is the exact difference ?This is the picture I have:
When you encapsulate something you get an inside and an outside. The outside is the abstraction. It describes how the encapsulated entity behaves viewed from the outside. This is also called the type. Hidden inside is the implementation. It holds detail information about how the type's behaviour is accomplished.
It's a very simplified picture but I think it's quite accurate and it works for me. -
What is difference between Iterator and Collection Wrapper?
Hi all,
I dont understand the actual difference between Iterator and Collection Wrapper. I observed both are used for the same purpose. Could any one please let me know when to use Collection Wrapper and when to use Iterator??
Thanks,
Chinnu.L_Kiryl is right.
Collections support global iteration (through collection->get_next( )) and local iteration (through iterator->get_next( )).
Each collection has a focus object. Initially, the first object has the focus.
Any global iteration moves the focus, which is published by the event FOCUS_CHANGED of the collection.
If you want to iterate on the collection without moving the focus (and without triggering timeconsuming follow-up processes) you can use local iteration. To do so, request an iterator object from the collection and use this to iterate.
And one more advantage of using iterator: it takes care of deleted entities. If you use global iteration then when you reach deleted entity it will be an exception. But there is no exception with iterator in the same situation. -
What is difference between modify and update i am using
hi
what is difference between mofify and update
my requiremen is to have three condition checkec while mofifying or updating from a internal table
the three fields are
cus no
status
date these all are primary key in the database table
so which sould i use modify or update
there might be entry already existing in database table or new entry to be created if already existin it should check on the primary keys and updatat if not it should add a record
pls suggest whihc to use and how to implement the check on teh threee primary key
like if modify ztable from table it_test
now where condition ? can be used or not with modify? and if yes how
if not should i use update will update create a new entry if no entry is there and please give syntex
regards
AroraHi Nishant Arora,
Modify: It works in performing two actions.
They are: Insert + Update.
For Example If a record that is exited in database, so you are modifying that record, it updates that particular record.
Similarly, If the is not existed in the database, you are modifying it, it inserts a new record.
Update: Update means just it updates the status, I mean it only updates the record. It doesn't inserts any new record if that particular record is not present in the database.
These are the cases you need to write these statements.
Syntaxes: :
Go through this links please.,
http://help.sap.com/saphelp_nw04/helpdata/en/e7/968aa8b2384dd9835f91e7f8470064/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/fc/eb35eb358411d1829f0000e829fbfe/content.htm
Reward points if useful
Cheers,
Swamy Kunche
Edited by: Swamy Kunche on Jun 11, 2008 2:41 PM -
What is Difference between SXMB_MONI and SXMB_MONITOR?
what is Difference between SXMB_MONI and SXMB_MONITOR?
Can any explain to this question.please?Hello,
Both are same.
SXMB_MONI is area menu which will contain all multiple transactions pertaining to monitoring.
SXMB_MONI contains some functions viz monitoring for Bridging, Archived Msgs, Job overview, persistence layer analysis.
SXI_monitor directly leads to the message monitoring for the IS, which is part of the SXMB_MONI.
SXI_MONITOR directly executes the monitoring report.
Thanks,
Satya
Maybe you are looking for
-
Office 2013 Pro Plus won't install - log file included
Hi, I've freshly built a Windows 8.1 Pro laptop and attempted to install Office Pro Plus 2013. It bombs out at the end of the install, reverses the install and the GUI reports: Microsoft Office Professional Plus 2013 encountered an error during setup
-
I am running Mac OSX 10.6.8 and iTunes 10.4.1, and when I click on an album or artist name to edit it, for example, if I place my cursor to the right of the last letter or select the last word and hit my delete key, all it does is highlight the chara
-
Play Audio through ATV with my HDTV off?
I've searched the threads without too much luck on this topic. I don't have an ATV yet, but I plan to run an HDMI cable from the ATV to my TV. I also plan to run a toslink optical audio cable from the ATV to an available input on my stereo receiver.
-
Need to Log into two different screens on bootup?
Since resinstalling Mac OS X Mountain Lion on my 2012 13'' Macbook Air, I have to log in twice. While setting up it made me create a new password before it would wipe the disk and let me continue. So now I have to log in twice booting up my macbook a
-
Component requestFocus question?
Hello, I have components arranged in different panels and panels arranged in tab pane.I have framework for validating component values after confirming the changes and if an invalid value is found i popup error message and then call the invalid compo