Difference Between D1 PAL and DV PAL field order

Hey guys,
so one of the engineers at work stumped me and i wanted to get your thoughts on this.
Full D1 in NTSC is 720x486 with a PAR of 0.9 (approximate) with a dominant bottom field order.
DV NTSC is 720x480 with a PAR of approximately 1.111~ with a dominant top filed order.
obviously, the DV codec is cutting off 3 odd lines of resolution at the top and bottom, therefore the field reversal and resizing the image (where i get the PAR of 1.111~).
so this is my question:
Full D1 PAL is 720x576 with a PAR of 0.9375 and a dominant bottom field order.
why is DV PAL also 720x576 with a PAR of 1.0666 ~ and a dominant top field order?
thanks for any help, since i know this is not really an editing question
Mikey M.

Similar Messages

Difference between Key figure and a Key field?

Difference between Key figure and a Key field?
Thanks,
Pramod

Hi,
Key fileds as just like your primary key of R/3 Tables.
Key figure are type of info object which is used to hold amout,value for your info providers..
check this link for key figures and there types...
http://help.sap.com/saphelp_bw31/helpdata/en/80/1a63b3e07211d2acb80000e829fbfe/frameset.htm
under "Tab Page: Aggregation". you can be able to find three aggregation options:
Minimum
Maximum
Sum
Types of non-cumulative keyfigures
Regards,
Viren.

Difference between Maint workcenter and workcenter in Maintenance order

Dear PM Guru's,
i am little bit confusing regard the follow work center descriptions in maintenance order. In Maintenance order header data One Maint work center is there, and one more in Operation tab one more work center is there. Is these two work centers are maintenance related work centers or not? if these maintenance work centers how we can define these two separately? in which situation we can use these work centers? In general how we can define the work centers in plant maintenance ? for my client i created based on group of people, for maintenance people one work center and electrical people one work center , these two are i am using at Maint work center field. But i am not understand workcenter in Operation tab? please guide me , yours suggestions help me to overcome the mistakes if i did any thing wrong. i like to know the impact of the these two work centers use also? if user wants each work center for individual work center how i can map where i can assign this work center?
thanks & regards
Jalu

Hi
from SAP help
The Main Work Center
The main work center usually represents one person or a department, responsible for ensuring that the maintenance work in an order is executed by the work centers performing the individual operations.
The Performing Work Center
The performing work center usually represents one person or a group of people who perform the maintenance work in the operations of an order.
Use
The Main Work Center
The main work center must be entered in the order header, whereupon its master data is copied into the order as a default.
During internal processing, the main work center is also used as a default for the performing work center.
In addition to the main work center, you can create a specific employee, who has been represented in the Human Resources (HR) component with their own master record, as Person responsible.
The Performing Work Center
In addition to the main work center, you can create a specific employee, who has been represented in the Human Resources (HR) component with their own master record, as Person responsible. You can also assign other employees to an operation in the Requirement assignment.
The performing work center is managed in the operation data for the order. It is proposed as a performing work center for the operations in the order. Since capacities are assigned to the performing work center and costs assigned using the activity type, the performing work center is required primarily for capacity planning, scheduling and cost determination.
It is also possible to create operations without entering a performing work center. A control key, which is not linked to a cost center or an activity type, must then be assigned to these operations. It may be that the operations are simply used for documentation purposes, for example, operations that only contain safety instructions or specifications for the production/resources tools to be used. Operations without a specified performing work center are also used in external processing.
Regards
thyagarajan

Finding difference between Max date and Min date from single date field

Dear Experts,
Here I am with a scenario where i didnt find any solution in SDN and in most threads it is unanswered.
I have 1 KF which is a date field. With reference to Serial no, I want to find out the Max and Min date from the same KF. I created 2 CKF where the same KF is used in both CKF to find the Min and Max dates,
Ex:
Serial No | Material | Actual Del date | Max | Min | Difference
0123 | 300012 | 01.01.2009 | 31.01.2009 | 01.01.2009 | 30
0123 | 300013 | 07.01.2009 | 31.01.2009 | 01.01.2009 | 30
0123 | 300018 | 15.01.2009 | 31.01.2009 | 01.01.2009 | 30
0123 | 300014 | 30.01.2009 | 31.01.2009 | 01.01.2009 | 30
0124 | 300019 | 02.01.2009 | 10.01.2009 | 02.01.2009 | 8
0124 | 300012 | 06.01.2009 | 10.01.2009 | 02.01.2009 | 8
0124 | 300017 | 10.01.2009 | 10.01.2009 | 02.01.2009 | 8
This is the way how I want the output where now I am able to get the values right till Max and Min and not the difference. I even created the 3rd CKF the find the difference but it is not working.
How can I find the difference between the Max and Min dates?
Regards,
Chan

Hi
You have FM --DAYS_BETWEEN_TWO_DATES you can use this while Customer Exit.
Try to Have 2 RKF for Min Data and Max Date and create a formula/CKF on the same ..
Hope it helps

Quality difference between S-video and RCA

Can someone tell me what's the difference (in quality) between S-video out and RCA out?
I'm using RCA out because with s-video, the image shows up in black and white on my TV.
It would help to know I'm not loosing too much quality this way...
Regards everyone.

pauliewog is speechless
But what Robi says is true!
The various forms of (analogue) signal transfer are, in descending order of quality:
RGB - The Red, Green and Blue signals are generated by the PC (say), and connected by separate wires to ultimately control the Red, Green and Blue electron guns of the display monitor/TV set. The standard 15-pin "VGA" connector is RGB (plus H and V synchronising pulses).
YUV - Also called Component, and YCrCb, as found on DVD players. The Y is the luminance, or Black-and-White component, while the Cr and Cb are the Differences between the Y and the Red and Blue signals respectively. Usually, the Y signal has higher bandwidth than the Cr and Cb signals (twice as many Y samples as Cr and Cb samples on the DVD). Still needs wires, but the Sync is added to the Y signal.
Y/C - aka S-Video. The Y is as above, but the Cr and Cb signals are used to modulate a subcarrier (3.579545MHz for NTSC, 4.43361875MHz for PAL), with one of the signals effectively at 90 degrees to the other - the C signal. The bandwidths of the colour difference signals need to be bandwidth limited to about 1/3 of the subcarrier frequency (about 1.7MHz for PAL from memory), compared to the Y bandwidth of 5MHz for broadcast television. In PAL, the phase of one of the signals is inverted every other line (PAL = Phase Alternating Line, aka Peace At Last). Transmission errors which result in green faces and purple trees in NTSC (National Television Standards Commitee, aka Never Twice the Same Colour) tend to desaturate the colours instead.
CVBS, aka Composite Video (also RCA, named after the company that developed the type of connector used, which is typically yellow for video). The Y and C (and sync) signals are combined one one wire. The TV has a harder job of separating them back to RGB :(
RF (Radio Frequency). The CVBS signal is modulated onto an RF carrier, which could be anywhere between about 45MHz and about 1000MHz (not counting satellite distribution), so that it looks the same as a broadcast TV station to a TV set, and connects via a single cable to the antenna socket of a TV set. So first the TV has to demodulate the signal back to CVBS, before separating the Y and C, then separating the C into Cr and Cb and putting into a matrix with the Y to get RGB back. Nevertheless, this is a useful technique for distributing a signal to a lot of TV sets over a reasonably large area. It is also the only method that works with old TVs without A/V inputs - which is why game consoles used to come with an RF Modulator (aka RF Converter) as standard.
The above methods are also in descending order of signal bandwidth, which restricts the available resolution, or the finest horizontal detail (especially colour detail). Generally, 800x600 is about as good a resolution as you can expect to get on a TV display without resorting to special enhancing techniques.
The above is probably a lot more detail than you need, but is still a fairly superficial explanation. But study it up, the test is next Monday at 9am :D
Cheers

What is difference between sy-tabix and sy-index.

SAP Seniors,
Can you please let me know what is difference between sy-index and sy-tabix.
I read the SAP help, it is confusing for me. it looks like both are same from help. please help me.
Thank you
Anitha.

HI,
Here is a brief description of difference between SY_TABIX and SY_INDEX and using them with several conditions.
SY-TABIX
Current line of an internal table. SY-TABIX is set by the statements below, but only for index tables. The field is either not set or is set to 0 for hashed tables.
APPEND sets SY-TABIX to the index of the last line of the table, that is, it contains the overall number of entries in the table.
COLLECT sets SY-TABIX to the index of the existing or inserted line in the table. If the table has the type HASHED TABLE, SY-TABIX is set to 0.
LOOP AT sets SY-TABIX to the index of the current line at the beginning of each loop lass. At the end of the loop, SY-TABIX is reset to the value that it had before entering the loop. It is set to 0 if the table has the type HASHED TABLE.
READ TABLE sets SY-TABIX to the index of the table line read. If you use a binary search, and the system does not find a line, SY-TABIX contains the total number of lines, or one more than the total number of lines. SY-INDEX is undefined if a linear search fails to return an entry.
SEARCH <itab> FOR sets SY-TABIX to the index of the table line in which the search string is found.
SY-INDEX
In a DO or WHILE loop, SY-INDEX contains the number of loop passes including the current pass.
Hope this helps.
Thank you,
Pavan.

Difference between sy-tabix and sy-index?

tell me about sy-tabix and sy-index?what is the difference between sy-tabix and sy-index?
Moderator Message: Please search before posting. Read the [Forum Rules Of Engagement |https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement] for further details.
Edited by: Suhas Saha on Jun 18, 2011 5:33 PM

HI,
Here is a brief description of difference between SY_TABIX and SY_INDEX and using them with several conditions.
SY-TABIX
Current line of an internal table. SY-TABIX is set by the statements below, but only for index tables. The field is either not set or is set to 0 for hashed tables.
APPEND sets SY-TABIX to the index of the last line of the table, that is, it contains the overall number of entries in the table.
COLLECT sets SY-TABIX to the index of the existing or inserted line in the table. If the table has the type HASHED TABLE, SY-TABIX is set to 0.
LOOP AT sets SY-TABIX to the index of the current line at the beginning of each loop lass. At the end of the loop, SY-TABIX is reset to the value that it had before entering the loop. It is set to 0 if the table has the type HASHED TABLE.
READ TABLE sets SY-TABIX to the index of the table line read. If you use a binary search, and the system does not find a line, SY-TABIX contains the total number of lines, or one more than the total number of lines. SY-INDEX is undefined if a linear search fails to return an entry.
SEARCH <itab> FOR sets SY-TABIX to the index of the table line in which the search string is found.
SY-INDEX
In a DO or WHILE loop, SY-INDEX contains the number of loop passes including the current pass.
Hope this helps.
Thank you,
Pavan.

Difference between sy-datum and sy-datlo

difference between sy-datum and sy-datlo

hi,
The GET TIME statement synchronizes the time on the application server with the time on the database server and writes it to the field SY-UZEIT. SY-DATUM and the system fields for the local timezone (SY-TIMLO, SY-DATLO, and SY-ZONLO) are also reset.
SY-DATLO
Users local date, for example 19981129, 19990628,
SY-DATUM
Current application server date, for example 19981130, 19990627,
SY-DAYST
X during summertime, otherwise space.
SY-FDAYW
Factory calendar day of the week: Monday = 1 Friday = 5.
SY-TIMLO
Users local time, for example 154353, 225312,
SY-TZONE
Time difference in seconds between local time and Greenwich Mean Time (UTC), for example,
360, 10800.
SY-UZEIT
Current application server time. for example 164353, 215312,
SY-ZONLO
Users time zone, for example, EST, UTC,
reward points if useful

What is difference between User Exits and BAPI

hello sap gurus
what is difference between User Exits and BAPIs

http://www.sap-img.com/abap/what-is-user-exits.htm
www.****************
Where as this customer exits are again divided into:
1. Menu Exits.
2. Field Exits.
3. Screen Exits.
4. Function module exits.
These all the things comes under Enhancements.
User exits
1.A user exit is a three character code that instructs the system to access a program during system processing.SXX: S is for standard exits that are delivered by SAP.
XX represents the 2-digit exit number.UXX: U is for user exits that are defined by the user. XX represents the 2-digit exit number
2.USER EXITS are FORMS and are called by SAP standard programs
using PERFORM.
3.Inside the form (user exit) you can read and change almost
any global data from host program.
4. User exits are more flexible because you have more information to use in your code but on the other hand , it is very easy to manipulate erroneously global data and lead the standard program to a dump or even to make database inconsistent.
5.While changing User-exit,Access Key is required,
BAPI is nothing function module but which is remote enabled, means you can access this fm through other SAP or non-SAP system by assingning to business object,which we can crea in SWO1 transaction.
more details see WWW.****************
reward if helpful

What is difference between report programming and dialog programming?

hi,
what is difference between report programming and dialog programming? plz provide some example code
bye

ABAP programming
Basically reports are used to read database and represent the results in lists.
Reports are collections of processing blocks that the system calls depending on events.
We can use reports to evaluate data from database tables.
Reports are stand alone programs and controlled by events.
A report itself never creates events
steps in report:
Processing the selection screen
Reading the database
Evaluating the data and creating lists
Outputting a list.
1st u write simple logics, after that u can enhance the code as step by step.
http://venus.imp.mx/hilario/Libros/TeachYrslfAbap4/index.htm
http://help.sap.com/saphelp_47x200/helpdata/en/d1/802cfc454211d189710000e8322d00/frameset.htm
http://www.sapdev.co.uk/reporting/reportinghome.htm
Dialog Programming
Structure of a Dialog Program
A dialog program consists of the following basic components:
Screens (dynpros)
Each dialog in an SAP system is controlled by dynpros. A dynpro (DYnamic PROgram) consists of a screen and its flow logic and controls exactly one dialog step. The flow logic determines which processing takes place before displaying the screen (PBO-Process Before Output) and after receiving the entries the user made on the screen (PAI-Process After Input).
The screen layout fixed in the Screen Painter determines the positions of input/output fields, text fields, and graphical elements such as radio buttons and checkboxes. In addition, the Menu Painter allows to store menus, icons, pushbuttons, and function keys in one or more GUI statuses. Dynpros and GUI statuses refer to the ABAP/4 program that control the sequence of the dynpros and GUI statuses at runtime.
ABAP/4 module pool
Each dynpro refers to exactly one ABAP/4 dialog program. Such a dialog program is also called a module pool, since it consists of interactive modules. The flow logic of a dynpro contains calls of modules from the corresponding module pool. Interactive modules called at the PBO event are used to prepare the screen template in accordance to the context, for example by setting field contents or by suppressing fields from the display that are not needed. Interactive modules called at the PAI event are used to check the user input and to trigger appropriate dialog steps, such as the update task.
All dynpros to be called from within one transaction refer to a common module pool. The dynpros of a module pool are numbered. By default, the system stores for each dynpro the dynpro to be displayed next. This dynpro sequence or chain can be linear as well as cyclic. From within a dynpro chain, you can even call another dynpro chain and, after processing it, return to the original chain.
Check this link for basics.
http://sap.mis.cmich.edu/sap-abap/abap09/index.htm
Check this link for Dialog Programming/Table Control
http://www.planetsap.com/Tips_and_Tricks.htm#dialog
Check this SAP Help for Dialog Program doc.
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9cdc35c111d1829f0000e829fbfe/content.htm
Check this SAP Help link for Subscreens.
http://help.sap.com/saphelp_nw70/helpdata/en/9f/dbabfe35c111d1829f0000e829fbfe/content.htm
Check this link for subscreen demo program.
http://abapcode.blogspot.com/2007/05/demo-program-to-create-subscreen-in.html
Also check this link too.
http://abapcode.blogspot.com/2007/06/dialog-programming-faq.html
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9cdc35c111d1829f0000e829fbfe/frameset.htm
http://sap.mis.cmich.edu/sap-abap/abap09/sld004.htm
http://help.sap.com/saphelp_nw04/helpdata/en/52/670ba2439b11d1896f0000e8322d00/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/52/670c17439b11d1896f0000e8322d00/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/52/670c17439b11d1896f0000e8322d00/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9ccf35c111d1829f0000e829fbfe/frameset.htm
http://abapprogramming.blogspot.com/

What is difference between interactive list and interactive reports?

what is difference between interactive list and interactive reports?

hi check this..
interactive report/list means any input(double click or single click or user command ) on the screen will results a new screen with the corresponding fields....this is upto 20 levels only check this..
report .
start-of-selection.
write:/ 'this is the source list'.
at line-selection .
if sy-lsind = 1 .
write:/ ' this is the 1st list'.
elseif.
if sy-lsind = 2 .
write:/ ' this is the 2 list'.
if sy-lsind = 3 .
write:/ ' this is the 3 list'.
if sy-lsind = 4 .
write:/ ' this is the 4 list'.
if sy-lsind = 5 .
write:/ ' this is the 5 list'.
if sy-lsind = 6 .
write:/ ' this is the 6 list'.
if sy-lsind = 7 .
write:/ ' this is the 7 list'.
if sy-lsind = 8.
write:/ ' this is the 8 list'.
if sy-lsind = 9 .
write:/ ' this is the 9 list'.
if sy-lsind = 10 .
write:/ ' this is the 10 list'.
endif.
regards,
venkat

Difference between primary key and primary index

Dear All,
Hi... .Could you pls tell me the difference between primary key and primary index.
Thanks...

Hi,
Primary Key : It is one which makes an entry of the field unique.No two distinct rows in a table can have the same value (or combination of values) in those columns.
Eg: first entry is 111, if you again enter value 111 , it doesnot allow 111 again. similarly for the strings or characters or numc etc. Remember that for char or numc or string 'NAME' is not equal to 'name'.
Primary Index: this is related to the performance .A database index is a data structure that improves the speed of operations in a table. Indices can be created using one or more columns, providing the basis for both rapid random lookups and efficient ordering of access to records. The disk space required to store the index is typically less than the storage of the table (since indices usually contain only the key-fields according to which the table is to be arranged, and excludes all the other details in the table), yielding the possibility to store indices into memory from tables that would not fit into it. In a relational database an index is a copy of part of a table. Some databases extend the power of indexing by allowing indices to be created on functions or expressions. For example, an index could be created on upper(last_name), which would only store the uppercase versions of the last_name field in the index.
In a database , we may have a large number of records. At the time of retrieving data from the database based on a condition , it is a burden to the db server. so whenever we create a primary key , a primary index is automatically created by the system.
If you want to maintain indices on other fields which are frequently used in where condition then you can create secondary indices.
Reward points if helpful.
Thanks,
Sirisha..

Difference between primary eindex and secondary index?

hi experts
pls answer me
difference between primary eindex and secondary index?
rewads apply.
thanks.
naresh.

hi,
check this link.
http://help.sap.com/saphelp_47x200/helpdata/en/cf/21eb2d446011d189700000e8322d00/frameset.htm
A difference is made between Primary & Secondary indexes to a table. the primary index consists of the key fields of the table and a pointer to the non-keys-fields of the table. The Primary index is generated automatically when a table is created and is created in the datebase as the same times as the table. It is also possible to define further indexes to a table in the ABAP/4 dictionary, which are then referred to as Secondary indexes.
Always it is not mandatory that an index should have all the key fields of a table. To see the index of a table
goto SE11->specify table name->click on the indexes... button on the application toolbar.
Based on your requirement you can you any of those index fields in the where clause of your query. Always its a better practice to use the index fields in the order specified. While selecting the records from a table it is always better to select the fields in the same order as specified in the table.

Difference between Start Routine and End Routine in Transformations

Hi Friends,
I'm using BI 7.0... here in Transformations step we have two options..that is START ROUTINE... and END ROUTINE... What is the Difference between Start Routine and End Routine in Transformations..
When we go for Start Routine.. and when we go for End Routine..
Plz clarrify... points will be rearded..
thanks
babu

Hi,
One real time scenario for End Routine.
We have a scenario where in a datasource field is mapped to three infoobjects on the datatarget side. There are 2 key figures which need to get data after these these Infoobjects are filled. The best place for this to happen would be in a End Routine, where in we would loop through the results package and using the values of the infoobjects from the data target ( Cube in this case).
Hope this helps,
HD

What is the difference between scheduling agreement and delivery schedule

Hi
1. Can anyone explain me the difference between scheduling agreement output
    and scheduling agreement delivey schedule
    Will the both look same in T.code SP02 when seeing the output for a document.
    Can anyone send me T.codes for above ones in purchasing.
2. when seeing the Detailed statement for rebate agreement,there is item number.
    In which table can we see the item number for rebate agreement

Hi,
If you have to deal with more complex situations, you can define a delivery cycle in the material master record in addition to the planning cycle. In so doing, you determine the days on whichthe vendor delivers his goods. The delivery cycle is entered in the material master record as a planning calendar in the Planning calendar field.
You enter a delivery cycle if the delivery date (or the goods receipt date) depends on the day on which you order the goods. For example, you carry out the planning run and place your orders on Mondays and Tuesdays. If you place the order on Monday, the delivery is made on Wednesday, if you wait until Tuesday to place the order, the delivery is not made until Friday
Where as Planning calander is Three character number (numeric or using letters) that specifically identifies a PPS-planning calendar. The difference between Planning calender and delivery cycle is If you have selected the MRP type "MRP" and have set a period lot-sizing procedure according to planning calendar, you enter here which planning calendar is to be used.
If you selected the "time-phased planning" MRP type, the planning calendar that you specify here defines the delivery cycle. This specifies the days on which the vendor delivers the material. You can enter the planning cycle in addition to the delivery cycle

Technical difference between credit memo and invoice

Hi,
What is difference between transaction invoice and credit memo that are created in transaction FB60 and FB65.( is there any field that can exactly differentiate between these transaction types)
Regards
paveee.

Hi Praveen,
I think this is not related workflow question but i know the some difference fields in b/w these two.
Vendor Invoice (FB60)
Incoming Credit Memos (FB65)
Incoming Credit Memos:
As required fields:
· Transactn
· Bal.
· Vendor
· Document date
· Doc. type
· Posting date
· Reference
· Amount
· Currency
· Text
· Company code
Vendor Invoice
As required fields:
·         Transactn
·         Bal.
·         Vendor
·         Invoice date
·         Doc. type
·         Posting date
·         Reference
·         Amount
·         Currency
·         Text
·         Baseline date
·         Company Code
Thanks and Regards,
Prabhakar Dharmala

Difference Between D1 PAL and DV PAL field order

Similar Messages

Maybe you are looking for