Difference between different roles of APs

Hi
I am Kinda curious to study in detail the different station roles of the APs and the difference between them. Does anybody know where I can find this information?
Thanks in advance

Hi Sachendra,
Here is some reading that may help;
Roles and the Associations of Wireless Devices
From this good doc;
http://www.cisco.com/en/US/products/hw/routers/ps272/prod_configuration_basics09186a008073f6b7.html
Access Point as a Workgroup Bridge Configuration
http://www.cisco.com/en/US/products/hw/wireless/ps4570/products_configuration_example09186a00805b9b87.shtml
WLAN Radio Coverage Area Extension Methods
http://www.cisco.com/en/US/customer/products/hw/wireless/ps430/products_tech_note09186a00805190f1.shtml
Cisco Unified Wireless Network Overview
http://www.cisco.com/en/US/netsol/ns339/ns395/ns176/ns282/netbr09186a0080184925.html
Cisco Aironet Wireless Access Points Solution Overview
http://www.cisco.com/en/US/products/ps6521/prod_brochure0900aecd8035a015.html
Hope this helps!
Rob

Similar Messages

Differences between different IR versions

Can you please tell me the differences between different IR versions?
Thanks

Here are the 11.1.2 specific IR changes: from the R&A Readme:
Interactive Reporting
Support for SFTP
SFTP protocol is now supported for distribution outputs generated by jobs and schedules. For more information, see the Hyperion Reporting and Analysis Framework Administrator’s Guide.
Interactive Reporting Roles
Two new roles, IR HTML Viewer and IR WebClient Viewer, have been added for Interactive Reporting. For additional information, see the EPM User and Role Security Guide.
Removal of CMC
CMC is no longer a separate web application. All functionality has been merged into the Administer module. For more information, see the Hyperion Reporting and Analysis Framework Administrator’s Guide.
There are also several Workspace changes which would could impact IR users as well, depening on your particular set up , it might be worthwhile reviewing those as well.
Cheers, Iain

Differences between different versions of BW 2.1C,3.0A and 3.5

Can anybody tell me the differences between different versions of BW.
I m new to SAP BW,i directly learned in BI7.0.So please anybody let me know the difference in implementation of features in 2.1C, 3.0A ,3.5 ,if possible BI7.0 also

please read this:
http://help.sap.com/saphelp_nw70/helpdata/en/b2/e50138fede083de10000009b38f8cf/frameset.htm

Difference between different Invoices

Hi Frnds,
Can any body let me know the difference between Commercial invoice,
Tax Invoice & Retail Invoice in terms of Bussiness as well as SAP.
Regards
sunil

A commercial invoice is a bill for the goods from the seller to the buyer. Commercial invoices are utilized by customs officials to determine the value of the goods in order to assess customs duties and taxes.
In general there is no standard form for a commercial invoice although they tend to contain many of the following features:
seller's contact information
buyer's contact information
consignee's contact information (if it is different from the buyers)
invoice date
a unique invoice number
sales terms (usually in incoterm format)
payment terms
currency of sale
full quantities and description of merchandise (Generally this includes unit price and total price. Product descriptions should be consistent with the buyer's purchase order. Including the Harmonized System commodity codes can be helpful, especially in countries that are WTO members.)
certification that the invoice is correct (Standard language is "We certify that this invoice is true and correct."
Excise Invoice is charged on the sale of a particular good.
For Combination of creating 2-3 invoices we need to maintain the same
- Payer.
- Shedule Lines.
- Payments Terms .
Excise invoice Original for Buyer copy, whether prices are inclusive or exclusive of excise duty.
The invoice in which the Excise duties are included.
As per Indian tax system, Excise duty (16%) is payable by each manufacturing unit on the value of manufactured goods / on the value added. The manufacturing plant is supposed to submit an excise duty report on fortnightly / monthly basis. Various registers (RG1, RG23A, RG23C, PLA) are maintained for that purpose, which record all the transactions including movement of goods, cenvat credit available and cash balance available.
In SAP, we use transaction j1id for configuration and j1iin, j2i7, j1i5, j2i5, j2i6, j1ip for creating, extracting and printing excise invoice.
Rewards Points if it useful.

Difference between SU01 ROLE and attribute ROLE in org.structure

HI,
In SU01 transaction ROLE tab employee role is assigned to the user.
In org. strucute attribute ROLE also contains the employee role.
what is the difference between ther two ?
we should mention employee role for the user in SUO1 and attribute ROLE both places to create shopping cart ?
please guide...points are alloted.
Thanks
mani

Hi SRM guys,
Just i want to know what is the perpose of the attribute - ROLE in Org.structure
and what is use of the ROLE tab in SU01 for user.
Both places ( attributes and in SUO1-ROLE tab ) need to give the sap_bbp_stal_employee role ??? to shop the user...
please confirm ..

GP difference between Portal Role GP Administrator and Process Role Admin

Please explain the difference between the Portal Role "GP Administrator" and the Process Role "Administrator"
In the CAF-GP Security guide, it says that the Process Role "Administrator" can "Maintain process instances using the GP administration tools". What does this mean?
If a user has the Portal Role "GP Administration" and he DOES NOT have the Process Role "Administrator" for ANY process, he can still maintain ALL of the process instances from the Administration workset. He doesn't need to have the Process Role "Administrator" assigned to him.

All three have the same Admion rights.
They are the default users created when you are creating a domain.
If not used or edited they are a major security risk!
If you just use say weblogic or portaladmin and do not take care of changing the password or security privilige (changing the group from Admin, or deleting this user if not required) of yahooadmin then anyone knowing the admin url can login with this default username and its default password.
I would personally prefer creating custom users and remove the default users.
Regards,
Rommel Sharma

Bestway to find difference between two roles in quality and production

We have a process of collecting su53 dump and then analyze for missing authorization . However some time although everything works fine in quality , it fails in production . Hence I want to know a simple methodology to compare roles in quality and production to know difference ... Can anyone share best methodolgy being used in your setup ?
NPB

(1)How to find the difference between two dates at Universe level and at report Level in IDT?
DaysBetween ([Sale Date];[Invoice Date]) returns 2 if [Sale Date] is 15 December 2001 and [Invoice Date] is 17 December 2001.
(2) How to change format of dates from YYYY/MM/DD to DD/MM/YYYY in IDT at prompt level ?
=FormatDate(ToDate(YOUR DARE OBJECT);"YYYY/MM/DD");"dd'/'MM'/'yyyy")
=To_Char (object name, required format)
Find the below link for more info.
http://scn.sap.com/community/semantic-layer/blog/2014/04/18/bi41-business-layer-enhancements--create-display-format
(3)What is VIEWS in IDT of data foundation layer when we right click? could u plz give one example where exactly we use VIEWS?
A custom data foundation view is a subset of the data foundation Master view. You can use views when editing a large data foundation, and interested in working with a subset of tables. You can define multiple custom views for the data foundation due to the complexity of the data warehouse.
Essentially, need created views for each individual star scheme (like Sales, Production, Finance, Accounting, etc.) plus a view for eachcomplex dimension structure (like Business Partner, Material, Customer, Plant etc.),
Find the below link for more info.
http://scn.sap.com/docs/DOC-54422
(4) How to represent & report my IDT data in dashboards? could u plz explain the steps?
Please find the below link: http://scn.sap.com/docs/DOC-27559

How to calculate the % of time difference between different state

Hi there,
The below query returns the follwoign outptut. I need to calculate the % of time period that a specific state ( state ex: open or closed or all report )exists.
I have to find the time difference between the 2 states . How could I do that ?
The first row shows null for the previous state . How could get actual previous state for the first row?
SELECT si.station_name,
                vppstation.avi_control_state_code.STATE_SHORT_NAME,
                ash.state_id ,
                lag(ash.state_id) over (order by ash.STATE_EFF_DATE desc) previous_state,
                TO_NUMBER(TO_CHAR(ash.state_eff_date, 'SSSSS')) "periods in sec",
                TO_CHAR(ash.state_eff_date, 'dd-mon-yyyy hh24:mi:ss am') "Date"
           from vppstation.avi_state_history ash
left outer join vppstation.avi_control_state_code
             on ash.state_id = vppstation.avi_control_state_code.state_id
LEFT OUTER JOIN vpproadside.stations_installed si
             ON ash.station_id = si.station_id
          where ash.state_eff_date >= to_date('28/02/2010', 'dd/mm/yyyy')
            and ash.state_eff_date <= to_date('03/03/2010', 'dd/mm/yyyy') ;
       group by si.station_name
                     ash.state_id
       order by ash.state_eff_date asc ;
STATION_NAME                   STATE_SHORT_NAME STATE_ID               PREVIOUS_STATE         periods in sec         Date
IRDNCST02                      Open             1                    NULL                  85166                  01-mar-2010 23:39:26 pm
IRDNCST02                      All Report       3                      1                      85159                  01-mar-2010 23:39:19 pm
IRDNCMT01                      Closed           2                      3                      81376                  01-mar-2010 22:36:16 pm
IRDNCST02                      Open             1                      2                      78723                  01-mar-2010 21:52:03 pm
IRDNCST02                      All Report       3                      1                      76023                  01-mar-2010 21:07:03 pm
IRDNCMT01                      Open             1                      3                      55922                  01-mar-2010 15:32:02 pm
IRDNCMT01                      Closed           2                      1                      54931                  01-mar-2010 15:15:31 pm
IRDNCHA01                      Closed           2                      2                      41291                  01-mar-2010 11:28:11 am
IRDNCAS01                      Open             1                      2                      38847                  01-mar-2010 10:47:27 am
IRDNCAS01                      All Report       3                      1                      37947                  01-mar-2010 10:32:27 am
IRDNCST02                      Open             1                      3                      35332                  01-mar-2010 09:48:52 am
IRDNCST02                      All Report       3                      1                      32632                  01-mar-2010 09:03:52 am
IRDNCST02                      Open             1                      3                      31502                  01-mar-2010 08:45:02 am
IRDNCST02                      All Report       3                      1                      28802                  01-mar-2010 08:00:02 am
IRDNCHI01                      Open             1                      3                      25368                  01-mar-2010 07:02:48 am
IRDNCHI02                      Open             1                      1                      23939                  01-mar-2010 06:38:59 am
IRDNCMT01                      Open             1                      1                      20696                  01-mar-2010 05:44:56 am
IRDNCCH02                      Open             1                      1                      13452                  01-mar-2010 03:44:12 am
Edited by: Indhu Ram on Mar 11, 2010 1:34 PM
Edited by: Indhu Ram on Mar 11, 2010 2:20 PM

If you look at the table which is output of the given query , there is column called "STATE_ID" It shows the current state ie open or closed or all report.
The column 'PREVIOUS_STATE' shows the state before the current state. .In the table in 2nd row in previous_state column there is state_id = 1 (open)which is the state before 'all report state'

Differences between different versions of Oracle Database 10 g

I have some questions about the Oracle Database 10g Release 2 that we download from Oracle web site.
1)Does the software that we download from Oracle web site is similar to Enterprise Edition or Standard Edition or Standard Edition One or to which edition? In other words, similar to which edition?
2)What are the differences between Enterprise, Standard, and Standard Edition one?
3)Are they any features included in the licensing Oracle Database that does not include in the free one that we download from Oracle web site?

The dowloaded software contains every of the four editions. You choose which edition you want during the installation process.
The differences and extra-cost options are described in this paper on OTN
http://www.oracle.com/technology/products/database/oracle10g/pdf/twp_general_10gdb_product_family_0605.pdf

Differences between authorization role display and display change document?

Dear All,
I want to know what are the differences between activity authorization between display and display document change?
Regards
Aishah

Dear Mr Robert,
thanks for replying me. actually, it is to prevent user from other dept to change the PO even print/message. when i check inside authorization the configuration is only for their own dept by putting dept code at pur org field of change. but still can change. it is because of the me22 layout screen?

Difference between different types of patches

Hi all
I want to know difference between the database upgrade patchset, cpu,
psu, one off patches and what are the methods of deploying these patches?

Hi,
I want to know difference between the database upgrade patchset, cpu,psu, one off patches and what are the methods of deploying these patches?Refer thread for PUS and CPU:
Difference b/w CPU and PSU
usually *One-off patches are single small size patch used for fixing an existing bug.
PSU and CPU are consolidated of one-off patches, for more information refer thread mentioned above.
These are installed using Opatch utility
Patchests are certainly big in size and most of the bugfixes and new features are included within this, and will upgrade your patchset version.
suppose you Installed patchset 10.2.0.5 on 10.2.0.1 then your database will be upgraded to version *10.2.0.5*.
These patchsets are Installed using OUI
hope help :)
thanks,
X A H E E R

In OAWS difference between different stores

HI ALL,
I have worked on tcode OAWS but could not find exact difference between the follwing
-Storing for subsequent entry
-Storing for subsequent assignment
-Store and entry
-Store and assign
-Assign and store
Can nyone make me clear.
Regards,
Tejaswini

Hi
VENDOR_SYS --> System in which POs can be created for this Vendor. In other words system where the Vendor has been created for the purchase organization.
VENDOR_ACS --> System where Accounting for Vendor has to be checked. IN other words, its the FI system which take care of Financial transactions related to the vendor
Regards
Virender Singh

Difference between different RFCs

Hi All,
Could you please provide me with some useful material or brief knowledge where i can find out :
what is an s-RFC, t-RFC and q-RFC ? ?
Where all these are used ? ?
And what is the Difference between them ? ?
Regards,
Arkesh Sharma

Please check this link
http://help.sap.com/saphelp_nw2004s/helpdata/en/62/73241e03337442b1bc1932c2ff8196/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/6f/1bd5b6a85b11d6b28500508b5d5211/content.htm
The qRFC Communication Model
qRFC Properties and Possible Uses
All types of applications are instructed to communicate with other applications. This communication may take place within an SAP system, with another SAP system, or with an application from a remote external system. An interface that can be used for dealing with this task is the Remote Function Call (RFC). RFCs can be used to start applications in remote systems, and to execute particular functions.
Whereas the first version of the RFC, the synchronous RFC, (sRFC) required both systems involved to be active in order to produce a synchronous communication, the subsequent generations of RFC had a greater range of features at their disposal (such as serialization, guarantee for one-time-only execution, and that the receiver system does not have to be available). These features were further enhanced through the queued RFC with inbound/outbound queue.
Communication between applications within an SAP system and also with a remote system can basically be achieved using the Remote Function Call (RFC). Here, the following scenarios are possible:
· Communication between two independent SAP systems
· Communication between a calling SAP system and an external receiving system
· Communication between a calling external system and an SAP receiving system
The following communication model shows what these communication scenarios may look like in reality. The actual sending process is still done by the tRFC (transactional Remote Function Call). Inbound and outbound queues are added to the tRFC, leaving us with a qRFC (queued Remote Function Call). The sender system is also called the client system, while the target system corresponds to the server system.
Scenario 1: tRFC
This scenario is appropriate is the data being sent is independent of each other. A calling application (or client) in system 1 uses a tRFC connection to a called application (or server) in system 2. In this scenario, data is transferred by tRFC, meaning that each function module sent to the target system is guaranteed to be executed one time only. You cannot define the sequence in which the function modules are executed, nor the time of execution. If an error occurs during the transfer, a batch job is scheduled, which sends the function module again after 15 minutes.
Scenario 2: qRFC with outbound queue
In this scenario, the sender system uses an outbound queue, to serialize the data that is being sent. This means that function modules which depend on each other (such as update and then change) are put into the outbound queue of the sender system, and are guaranteed to be sent to the target system one after each other and one time only. The called system (server) has no knowledge of the outbound queue in the sender system (client), meaning that in this scenario, every SAP system can also communicate with a non-SAP system. (Note: the programming code of the server system must not be changed. However, it must be tRFC-capable.)
Scenario 3: qRFC with inbound queue (and outbound queue)
In this scenario, as well as an outbound queue in the sender system (client), there is also an inbound queue in the target system (server). If a qRFC with inbound queue exists, this always means that an outbound queue exists in the sender system. This guarantees the sequence and efficiently controls the resources in the client system and server system. The inbound queue only processes as many function modules as the system resources in the target system (server) at that time allow. This prevents a server being blocked by a client. A scenario with inbound queue in the server system is not possible, since the outbound queue is needed in the client system, in order to guarantee the sequence and to prevent individual applications from blocking all work processes in the client system.
Properties of the Three Communication Types
To help you decide which communication type you should use in your system landscape for your requirements, the advantages of the three communication types are listed below:
1. tRFC: for independent function modules only
2. qRFC with outbound queue: guarantees that independent function modules are sent one after each other and one time only (serialization). Suitable for communication with non-SAP servers.
3. qRFC with inbound queue: in addition to the outbound queue in the client system, an inbound queue makes sure that only as many function modules are processed in the target system (server) as the current resources allow. Client and server system must be SAP systems. One work process is used for each inbound queue.
The qRFC Communication Model
Purpose
Communication within an SAP system or with a remote system can take place using Remote Function Call (RFC). This enables the following scenarios:
· Communication between two independent SAP systems
· Communication between a calling SAP system and an external receiving system
· Communication between a calling external SAP system and an SAP system as the receiving system
Implementation Considerations
The following communication model shows how these communication scenarios can occur in practice. tRFC (transactional Remote Function Call) is still responsible for actually sending communications. tRFC is preceded by inbound and outbound queues, which have led to the name qRFC (queued Remote Function Call). The sending system is called the client system, and the target system represents the server system.
There are three data transfer scenarios:
Scenario 1: tRFC
This scenario is suitable if the data being sent is not interrelated. A calling application (or client) in system 1 uses a tRFC connection to a called application (or server) in system 2. In this scenario, the data is transferred using tRFC. This means that each function module sent to the target system is guaranteed to be processed once. The order in which the function modules are executed, and the time they are executed, cannot be determined. If a transfer error occurs, a background job is scheduled that resends the function module after a defined period of time.
Scenario 2: qRFC with Outbound Queue
In this scenario, the sending system uses an outbound queue to serialize the data being sent. This means that mutually dependent function modules are placed in the outbound queue of the sending system and are guaranteed to be sent in the correct sequence, and only once, to the receiving system. The called system (server) has no knowledge of the outbound queue in the sending system (client). Using this scenario, every SAP system can communicate with a non-SAP system (the program code of the server system does not need to be changed, but it must be tRFC-compliant).
Scenario 3: qRFC with Inbound Queue (and Outbound Queue)
In this scenario, in addition to the outbound queue in the sending system (client), there is also an inbound queue in the target system (server). qRFC with an inbound queue always means that an outbound queue exists in the sending system. This guarantees that the sequence of communications is preserved, and at the same time the resources in the client and in the server system are controlled efficiently. The inbound queue is processed using an inbound scheduler, which only processes as many queues in parallel as the current resources in the target system (server) will allow, This prevents a server from being blocked by a client.
Features
Features of the Three Communication Types
To help you decide which communication types you need to implement according to your system landscape and your requirements, the advantages of the three types of communication are explained below:
· tRFC
Suitable only for independent function module calls; the sequence of the calls is not preserved
· qRFC with outbound queue
Function modules in a queue are guaranteed to be processed only once and in sequence (serialization). Also suitable for communication with non-SAP servers.
· qRFC with inbound queue
The function modules created in the outbound queue are transferred from the outbound queue to the inbound queue; the sequence of the function modules is preserved. An inbound scheduler processes the inbound queues in accordance with the specified resources. Both the client and the server system must be SAP systems. One work process is used for each inbound queue.
Queued Remote Function Call (qRFC)
Purpose
All types of applications are instructed to communicate with other applications. This communication may take place within an SAP system, with another SAP system, or with an application from a remote external system. An interface that can be used for dealing with this task is the Remote Function Call (RFC). RFCs can be used to start applications in remote systems, and to execute particular functions.
Integration
In contrast the first version of RFC, synchronous RFC (sRFC), which required both participating systems to be active to form synchronous communication, subsequent generations of RFC now provide a considerably extended range of functions (for example, serialization, guarantee that processing occurs once, and the receiving system does not have to be available). These features were further enhanced through the queued RFC with inbound/outbound queue.
Contents:
The information about qRFC is organized into the following main sections, with more detailed subsections:
The qRFC Communication Model
· qRFC with Outbound Queues
· qRFC with Inbound Queues
qRFC Administration
· qRFC Administration: Introductory Example
· Outbound Queue Administration
· Inbound Queue Administration
qRFC Programming
· qRFC Programming: Introductory Example
· Outbound Queue Programming
· Inbound Queue Programming
· qRFC API
For an introduction to the new bgRFC (Background RFC), use the following links:
bgRFC (Background RFC)
· bgRFC Administration
· bgRFC Programming
Using Asynchronous Remote Function Calls
Asynchronous remote function calls (aRFCs) are similar to transactional RFCs, in that the user does not have to wait for their completion before continuing the calling dialog. There are three characteristics, however, that distinguish asynchronous RFCs from transactional RFCs:
· When the caller starts an asynchronous RFC, the called server must be available to accept the request.
The parameters of asynchronous RFCs are not logged to the database, but sent directly to the server.
· Asynchronous RFCs allow the user to carry on an interactive dialog with the remote system.
· The calling program can receive results from the asynchronous RFC.
You can use asynchronous remote function calls whenever you need to establish communication with a remote system, but do not want to wait for the functionu2019s result before continuing processing. Asynchronous RFCs can also be sent to the same system. In this case, the system opens a new session (or window). You can then switch back and for between the calling dialog and the called session
To start a remote function call asynchronously, use the following syntax:
CALL FUNCTION Remotefunction STARTING NEW TASK Taskname
DESTINATION ...
EXPORTING...
TABLES ...
EXCEPTIONS...
The following calling parameters are available:
§ TABLES
passes references to internal tables. All table parameters of the function module must contain values.
§ EXPORTING
passes values of fields and field strings from the calling program to the function module. In the function module, the corresponding formal parameters are defined as import parameters.
§ EXCEPTIONS
See Using Predefined Exceptions for RFCs
RECEIVE RESULTS FROM FUNCTION Remotefunction is used within a FORM routine to receive the results of an asynchronous remote function call. The following receiving parameters are available:
§ IMPORTING
§ TABLES
§ EXCEPTIONS
The addition KEEPING TASK prevents an asynchronous connection from being closed after receiving the results of the processing. The relevant remote context (roll area) is kept for re-use until the caller terminates the connection.
Transactional RFC (tRFC)
Transactional RFC(tRFC, previously known as asynchronous RFC) is an asynchronous communication method that executes the called function module just once in the RFC server. The remote system need not be available at the time when the RFC client program is executing a tRFC. The tRFC component stores the called RFC function, together with the corresponding data, in the SAP database under a unique transaction ID (TID).
If a call is sent, and the receiving system is down, the call remains in the local queue. The calling dialog program can proceed without waiting to see whether the remote call was successful. If the receiving system does not become active within a certain amount of time, the call is scheduled to run in batch.
tRFC is always used if a function is executed as a Logical Unit of Work (LUW). Within a LUW, all calls
· are executed in the order in which they are called
· are executed in the same program context in the target system
· run as a single transaction: they are either committed or rolled back as a unit.
Implementation of tRFC is recommended if you want to maintain the transactional sequence of the calls.
Disadvantages of tRFC
· tRFC processes all LUWs independently of one another. Due to the amount of activated tRFC processes, this procedure can reduce performance significantly in both the send and the target systems.
· In addition, the sequence of LUWs defined in the application cannot be kept. It is therefore impossible to guarantee that the transactions will be executed in the sequence dictated by the application. The only thing that can be guaranteed is that all LUWs are transferred sooner or later

Difference between different invokeLater() methods

What is actually the difference between:
SwingUtilities.invokeLater()
EventQueue.invokeLater()
Are there other classes that implements the invokeLater() method?

Use the frigging source, Luke.
javax.swing.SwingUtilities:
    public static void invokeLater(Runnable doRun) {
     EventQueue.invokeLater(doRun);
    }

Difference between different attributes in Org Structres?

Dear Experts,
Could you please help me to understand the difference between system alias for vendor (Vendor_Sys) and Accounting system for vendor (Vendor_ACS)?
What is the relevance of each attribute in business scenario?
Thanks and regards,
Ranjan

Hi
VENDOR_SYS --> System in which POs can be created for this Vendor. In other words system where the Vendor has been created for the purchase organization.
VENDOR_ACS --> System where Accounting for Vendor has to be checked. IN other words, its the FI system which take care of Financial transactions related to the vendor
Regards
Virender Singh

Difference between different roles of APs

Similar Messages

Maybe you are looking for