Difference between domain controllers and group policy objects in GPMC

Hello,
Am in confusion, someone can tel me the difference between
1.Domain controllers>default domain controller policy and
2.Group policy object>default domain controller policy
In Group policy management console and also i would like know where to define these categories. I normally use second option.
I have attached screenshot for your information.
regards,
Dharanesh,

This first/upper item is a link to the GPO, the second/lower item is the actual GPO.
(notice the link, has a shortcut arrow showing)
by default, when you double-click on a link, a message will display which says "you have clicked on a link....." and the messagbox offers a checkbox for "do not display this message again..."
Effectively they are equivalent to a shortcut-to-a-file vs. the actual file.
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Similar Messages

Difference between the archive and cache_archive in object tag

hello,
I am trying to find the difference between the archive and cache_archive for the object tag to use for applet.
I was going through this link which discusses the applet caching :
http://java.sun.com/javase/6/docs/technotes/guides/plugin/developer_guide/applet_caching.html
Especially : A sticky applet is placed in a disk cache created and
controlled by Java Plug-in which the browser cannot overwrite.How do i find what is the disk cache on my machine, and how different it is from the normal cache.
Currently i am using the normal archive parameter in object tag, and when i go to the java plugin control panel, i see all the downloaded jars.
But wanted to know how will it be different from using the cache_archive parameter.
Please advise,
Edited by: duskandawn on Jun 10, 2009 11:07 AM

Hi Juraj!
I feel the same too - Except the fact that SessionFacade is used to access EJBs while the VO are built as response objects (i.e. assembled) and unassembled by different web requests.
rnats

[Forum FAQ] The Value drop down list is grayed out when you perform search for Group Policy Objects in GPMC

Symptom
On Windows Server 2012 or Windows Server 2012 R2, when you use the Search for Group Policy Objects feature in GPMC, the “Value” field is not populated when you choose “User Configuration” as the Search Item. (See Figure 1.)
<Figure 1>
Cause
The happens because the Data of the (Default) value of the following Registry Key is not correct.
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\GPExtensions\{4D2F9B6F-1E52-4711-A382-6A8B1A003DE6}]
By default the Data is (value not set). (see Figure 2)
<Figure 2>
Resolution
The registry keys under [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\GPExtensions] are the Group Policy Preference Client Side Extensions. The CSE name of the GUID {4D2F9B6F-1E52-4711-A382-6A8B1A003DE6} is
RemoteApp and Desktop Connections. Please follow the steps below to resolve the issue.
1. Locate the registry key: [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\GPExtensions\{4D2F9B6F-1E52-4711-A382-6A8B1A003DE6}]
2. Take the ownership of this key: Right click on the registry key and choose Permissions option and click the Advanced button on the dialogue window. Then on the Advanced Security Settings dialogue window, click Change button to take the ownership
of the key for the current logon account and make the current logon account Full Control permission with the registry key. (See Figure 3.)
<Figure 3>
3. Change the data of (Default) value from "(value not set)" to
"RemoteApp and Desktop Connection Component". (See Figure 4)
<Figure 4>
4. Once the steps above are completed, the Value drop down list will be populated again when you perform Search in GPMC. (See Figure 5)
<figure 5>
This article has been created as a TechNet Wiki
here.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

thanks for the tip - but you should create this as a wiki article as it will be easier to reference in the future
Regards,
Denis Cooper
MCITP EA - MCT
Help keep the forums tidy, if this has helped please mark it as an answer
My Blog
LinkedIn:

Difference between Domain member and standalone server with AD binding

Hi all,
Can anyone explain the difference between:
A) Setting up a MacOSX server as Windows domain member server using Server Manager;
B) Setting up a MacsOSX server as Windows standalone server and joining the Active Directory using Directory Access;
My setup:
====================
We have a Windows 2003 A.D. running, all users are set up in the A.D.
Also we have two MacOSX servers, which provide file services (both AFP and SMB/CIFS) for Mac and Windows clients, while using the A.D. for user authentication.
One of the MacOSX servers is configured as a domain member server, the other is configured as Windows standalone server. The latter is bound to the A.D. using Directory Access.
Following the Apple manuals one should think that the first setup (domain member) is the best.
As for Open Directory: both servers are running as Standalone.
How my setup behaves
====================
Official Apple guidelines are to set up the Mac server as domain member. Reality is another thing though.
For AFP both servers perform equal: users are authenticated against the A.D. and get access to their shares. File/Folder permissions are as expected.
For Windows clients things aren't the same.
The server setup as Windows Domain member acts strange. Windows clients don't have single signon experience.
Every file/folder's owner shared on this server is <<unknown>> to the client. Also, when a Windows user creates a file/folder the owner is <<unknown>>.
Sometimes the Samba server just stops authentication. A relaunch of the Samba service fixes this.
The server setup as a standalone server performs as expected. Windows clients have single signon experience, there are no issues with file/folder owner. Also authentication never stops.
Several kinds of Mac Mac OS X (10.4.9)

Hi all,
Can anyone explain the difference between:
A) Setting up a MacOSX server as Windows domain member server using Server Manager;
B) Setting up a MacsOSX server as Windows standalone server and joining the Active Directory using Directory Access;
My setup:
====================
We have a Windows 2003 A.D. running, all users are set up in the A.D.
Also we have two MacOSX servers, which provide file services (both AFP and SMB/CIFS) for Mac and Windows clients, while using the A.D. for user authentication.
One of the MacOSX servers is configured as a domain member server, the other is configured as Windows standalone server. The latter is bound to the A.D. using Directory Access.
Following the Apple manuals one should think that the first setup (domain member) is the best.
As for Open Directory: both servers are running as Standalone.
How my setup behaves
====================
Official Apple guidelines are to set up the Mac server as domain member. Reality is another thing though.
For AFP both servers perform equal: users are authenticated against the A.D. and get access to their shares. File/Folder permissions are as expected.
For Windows clients things aren't the same.
The server setup as Windows Domain member acts strange. Windows clients don't have single signon experience.
Every file/folder's owner shared on this server is <<unknown>> to the client. Also, when a Windows user creates a file/folder the owner is <<unknown>>.
Sometimes the Samba server just stops authentication. A relaunch of the Samba service fixes this.
The server setup as a standalone server performs as expected. Windows clients have single signon experience, there are no issues with file/folder owner. Also authentication never stops.
Several kinds of Mac Mac OS X (10.4.9)

Need help with Adobe Reader 11.0.0.8 and Group Policy Objects

I am trying to deploy Adobe Reader 11.0.0.8 using Adobe Reader.
I am using the AcroRead.msi I found in
C:\Program Files (x86)\Adobe\Reader 11.0\Setup Files\{AC76BA86-7AD7-1033-7B44-AB0000000001}
HOWEVER
Instead of installing 11.0.0.8 it installs 11.0.0.0
I have not had anyone complain about it asking for an update. But I'm sure it's only a matter of time. (I know about the customization which could prevent the updates, but I can't figure out how to get the correct version installed is the issue not the updates).
So if I run the Setup.exe it ends up installing 11.0.0.8 but AcroRead.msi I think only installs 11.0.0.0
Obviously you can't give a GPO an .exe so it's a closed loop. You can't use an .exe to install the proper version. And you can't install the proper version because you can't use an .exe
You can only use the .msi which apparently only does 11.0.0.0
I've been trying this that, have done jumping jacks and back flips trying to fix this (tried different versions, different approaches to this, nothing seems to work)
Need some help. THIS IS WAYYYYYYY WAYYYYYYYYYYY Overcomplicated btw, shouldn't be this complicated for something so mundane.

A couple of approaches and all involve a bit of work.
Three steps:
Do the install of the 11.0.0 MSI at the command line
Then follow it with the 11.0.07 Updater MSP at the command line
Finally the 11.0.08 Security Patch MSP at the command line.
AIP
Create the AIP from the three files above then then run the MSI from the command line.

Difference between Field symbols and field group

Hi experts,
Can you please advice me what is the difference between field symbols and field groups.
Thanks in advance,
Logu.

Field symbols: are placeholders or symbolic names for other fields. They do not physically reserve space for a field, but point to its contents. A field symbol cam point to any data object. The data object to which a field symbol points is assigned to it after it has been declared in the program.
Whenever you address a field symbol in a program, you are addressing the field that is assigned to the field symbol. After successful assignment, there is no difference in ABAP whether you reference the field symbol or the field itself. You must assign a field to each field symbol before you can address the latter in programs.
Field Groups:
A field group is a user-defined grouping of characteristics and basic key figures from the EC-EIS or EC-BP field catalog.
Use
The field catalog contains the fields that are used in the aspects. As the number of fields grows, the field catalog becomes very large and unclear. To simplify maintenance of the aspects, you can group fields in a field group. You can group the fields as you wish, for example, by subject area or responsibility area. A field may be included in several field groups.
When maintaining the data structure of an aspect, you can select the field group that contains the relevant characteristics and basic key figures. This way you limit the number of fields offered.
A field group combines several existing fields together under one name
like
FIELD-GROUPS: fg.
then you can use one insert statement to insert values in fields of field-group.
INSERT f1 f2 ... INTO fg.
Field symbols
If u have experience with 'C', then understand this to be similar to a pointer.
It is used to reference another variable dynamically. So this field symbol will simply point to some other variable. and this pointer can be changed at runtime.
FIELD-SYMBOLS <FS>.
DATA FIELD VALUE 'X'.
ASSIGN FIELD TO <FS>.
WRITE <FS>.
Field symbols: are placeholders or symbolic names for other fields. They do not physically reserve space for a field, but point to its contents. A field symbol cam point to any data object. The data object to which a field symbol points is assigned to it after it has been declared in the program.
Whenever you address a field symbol in a program, you are addressing the field that is assigned to the field symbol. After successful assignment, there is no difference in ABAP whether you reference the field symbol or the field itself. You must assign a field to each field symbol before you can address the latter in programs.
Field Groups:
A field group is a user-defined grouping of characteristics and basic key figures from the EC-EIS or EC-BP field catalog.
Use
The field catalog contains the fields that are used in the aspects. As the number of fields grows, the field catalog becomes very large and unclear. To simplify maintenance of the aspects, you can group fields in a field group. You can group the fields as you wish, for example, by subject area or responsibility area. A field may be included in several field groups.
When maintaining the data structure of an aspect, you can select the field group that contains the relevant characteristics and basic key figures. This way you limit the number of fields offered.
example :
DATA: BEGIN OF SPTAB OCCURS 0,
line(1000), " or type string
END OF SPTAB.
DATA: IDX LIKE SY-INDEX.
field-symbols <FS1>.
split tb_sip AT ';' INTO table sptab.
LOOP AT SPTAB.
IDX = IDX + 1.
ASSIGN COMPONENT IDX OF STRUCTURE tb_detsip TO <FS1>.
If sy-subrc = 0.
<FS1> = SPTAB-line.
Endif.
Endloop.
append tb_detsip.
clear idx.
Field Groups / Extracts
http://help.sap.com/saphelp_46c/helpdata/EN/9f/db9ede35c111d1829f0000e829fbfe/frameset.htm
Field Symbols
http://help.sap.com/saphelp_46c/helpdata/EN/fc/eb387a358411d1829f0000e829fbfe/frameset.htm
Reward points if useful.

Difference between Field symbols and Field groups

Hi Friends,
can you tell me the differences between Field symbols and Field groups? with any examples preferably?
Regards
Dinesh

Hi Dinesh,
A field group combines several existing fields together under one name
like
FIELD-GROUPS: fg.
then you can use one insert statement to insert values in fields of field-group.
INSERT f1 f2 ... INTO fg.
Field symbols
If u have experience with 'C', then understand this to be similar to a pointer.
It is used to reference another variable dynamically. So this field symbol will simply point to some other variable. and this pointer can be changed at runtime.
FIELD-SYMBOLS <FS>.
DATA FIELD VALUE 'X'.
ASSIGN FIELD TO <FS>.
WRITE <FS>.
Field symbols: are placeholders or symbolic names for other fields. They do not physically reserve space for a field, but point to its contents. A field symbol cam point to any data object. The data object to which a field symbol points is assigned to it after it has been declared in the program.
Whenever you address a field symbol in a program, you are addressing the field that is assigned to the field symbol. After successful assignment, there is no difference in ABAP whether you reference the field symbol or the field itself. You must assign a field to each field symbol before you can address the latter in programs.
Field Groups:
A field group is a user-defined grouping of characteristics and basic key figures from the EC-EIS or EC-BP field catalog.
Use
The field catalog contains the fields that are used in the aspects. As the number of fields grows, the field catalog becomes very large and unclear. To simplify maintenance of the aspects, you can group fields in a field group. You can group the fields as you wish, for example, by subject area or responsibility area. A field may be included in several field groups.
When maintaining the data structure of an aspect, you can select the field group that contains the relevant characteristics and basic key figures. This way you limit the number of fields offered.
Field Groups / Extracts
http://help.sap.com/saphelp_46c/helpdata/EN/9f/db9ede35c111d1829f0000e829fbfe/frameset.htm
Field Symbols
http://help.sap.com/saphelp_46c/helpdata/EN/fc/eb387a358411d1829f0000e829fbfe/frameset.htm
Reward points if helpful.
Regards,
Hemant

Difference Between Data Type and Data Object

Difference Between Data Type and Data Object

hi magesh
Data types can be divided into
elementary,
reference, and
complex types.
Elementary Types
Elementary types are the smallest indivisible unit of types. They can be grouped as those with fixed length and those with variable length.
Fixed-Length Elementary Types
There are eight predefined types in ABAP with fixed length:
Four character types:
Character (C),
Numeric character (N),
Date (D),
and Time (T).
One hexadecimal type:
Byte field (X).
Three numeric types:
Integer (I),
Floating-point number (F)
and Packed number (P).
Variable-Length Elementary Types
There are two predefined types in ABAP with variable length:
STRING for character strings
XSTRING for byte strings
Reference Types
Reference types
describe data objects that contain references (pointers) to other objects (data objects and objects in ABAP Objects).
Data Types
1) As well as occurring as attributes of a data object, data types can also be defined independently.
2)You can then use them later on in conjunction with a data object.
3) The definition of a user-defined data type is based on a set of predefined elementary data types.
4) You can define data types either locally in the declaration part of a program using the TYPESstatement) or globally in the ABAP Dictionary.
5) You can use your own data types to declare data objects or to check the types of parameters in generic operations.
Data Objects
1)Data objects are the physical units with which ABAP statements work at runtime.
2) The contents of a data object occupy memory space in the program.
3) ABAP statements access these contents by addressing the name of the data object and interpret them according to the data type..
4) For example, statements can write the contents of data objects in lists or in the database, they can pass them to and receive them from routines, they can change them by assigning new values, and they can compare them in logical expressions.
5) Each ABAP data object has a set of technical attributes, which are fully defined at all times when an ABAP program is running (field length, number of decimal places, and data type).
6) You declare data objects either statically in the declaration part of an ABAP program (the most important statement for this is DATA), or dynamically at runtime (for example, when you call procedures).
7) As well as fields in the memory area of the program, the program also treats literals like data objects.
hope this helps u,
reward points if useful
Ginni

What is difference between ESB Service and ESB Service Group

Guys please tell me What is difference between ESB System and ESB Service Group and when we use them, i mean in what condition.
Many Thanks
Deepak

The use of these is explained in the ESB developers guide along with some examples in what case to use them. See: http://download-west.oracle.com/docs/cd/B31017_01/integrate.1013/b28211/esb_jdev.htm#sthref167

What is difference between distribution list and share point group? Can we add distribution list into person and group column of share point list?

what is difference between distribution list and share point group? Can we add distribution list into person and group column of share point list?

there is a workaround you can try, create audience and add DL to them and deal with the audience or convert DL to groups
https://social.technet.microsoft.com/Forums/en-US/02f0d773-8188-4d94-a448-0c04d838b0cf/distribution-lists-in-sharepoint?forum=sharepointgenerallegacy
Kind Regards,
John Naguib
Technical Consultant/Architect
MCITP, MCPD, MCTS, MCT, TOGAF 9 Foundation
Please remember to mark your question as answered if this solves your problem

Differences between Oracle BAM and Oracle BI and Question BAM Data Objects

Hi,
I have two questions.
1. Can someone tell me differences between Oracle BAM and Oracle BI?
My understanding about Oracle BAM is, we use BAM to build Dashboards or Reports.
We can also build DashBoards or reports using Oracle BI.
I am not able to understand why Oracle has two tools for same purpose?
Which tool is more powerful and user friendly(Oracle BI or Oracle BAM)?
2. Every time we plan to develop Dashboard or report in BAM, we need to create BAM ADC Data Object to store Data (i.e first step is to get data from external database or application and second step is to store data in BAM ADC data object).
My understanding is we have an extra step(i.e creating Data Object) in Oracle BAM to develop a report or DashBoard
I am wrong pl correct me?
Regards,
Shanti Nagulapalli.

Oracle 11g has many advanced features in PL/SQL over Oracle 9i.
refer here,
http://www.oracle.com/technetwork/database/features/manageability/9i-to-11g-real-world-customer-exper-133754.pdf
http://www.oracle.com/global/de/upgradecommunity/artikel/upgrade11gr2_workshop2.pdf
http://www.compuworks.com/events/view/233.pdf
http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getCourseDesc?dc=D52601GC10&p_org_id=15942&lang=US
Thanks

Exect difference between Fuzzy lookup and Fuzzy grouping

Hi all,
Can you pls explain difference between Fuzzy lookup and Fuzzy grouping in simple word,pls
Thanks
Selva

Hi Selva,
In brief, the Fuzzy Grouping Transformation can be used to group the similar rows in the source dataset and identify rows of data that are likely to be duplicate; while the Fuzzy Lookup Transformation can match records between the source table and reference
table that are similar, but not identical to, the lookup key.
Here are good examples about the two transformations:
http://ssis-tutorial-online.blogspot.com/2013/04/fuzzy-grouping-transformation.html
http://www.codeproject.com/Tips/528243/SSIS-Fuzzy-lookup-for-cleaning-dirty-data
Regards,
Mike Yin
TechNet Community Support

Differences between DATA TYPE and DATA OBJECTS

I am new to ABAP,I want to know the differences between DATA TYPE and DATA OBJECTS with some examples.
please help me regarding this.

Hi Ashish,
Data Types:       Are pure descriptions.
               No memory is associated with data types.
               Describes the technical properties of data objects.
EX.
1.     C-CHARACTER
2.     D-DATE
3.     F-FLOAT
4.     I-INTEGER
5.     N-NUMERIC TEXT
6.     T-TIME
7.     P-PACKED NUMBER
8.     X-HEXADECIMAL
9.     STRING-Variable length string.
10.     XSTRING-Variable length byte string.
Data Objects: Are created during runtime.
                They cannot exist without the data Types.
                Occupies memory space.
EX:
1.     INTERNAL DATA OBJECT- Internal Data objects
     LITEERAL- A literal has a fixed value.Ex: WRITE:u201DWORK HARDu201D.
     VARIABLES: Data statement is used to create variables.
EX.DATA: NUM TYPE I.
NUM: VARIABLE defined by data statement.
EX: DATA: PRICE LIKE NUM.
     CONSTANT-It is a data object, which contains a constant value throughout the program.
Can be declared in program by using CONSTANT statement.
EX:CONSTANT: INT TYPE I VALUE 15.
2.     EXTERNAL DATA OBJECT: Are defined in tables i.e In ABAP/4 dictionary you can access this data from table.
         EX: TABLES: SFLIGHT
          DATA: SEATS LIKE SFLIGHT-SEATSMAX.
3.     SYSTEM DEFINED DATA OBJECTS:Space & system variables like SY-UNAME,SY-DATUM, SY-REPID.
4.     SPECIAL DATA OBJECTS:
     PARAMETERS: Are Variables ,which can accept value from user.
      SELECTION SCREEN : Are special internal tables to accept value ranges from user.
3 APPROACHES TO DEFINE DATA OBJECTS.
1.     ELEMENTARY TYPES
DATA: Customer _Name (25) TYPE C,
               Vendor_Name (25) TYPE C.
2.     REFRENCE TO AN EXISTING FIELD:
DATA: Customer _Name2 (25) TYPE C,
              Vendor_Name2 (25) LIKE Customer_Name2
3.     REFRENCE TO NON-ELEMENTARY TYPE:
TYPES: T_NAME (25) TYPE C
DATA: CUSTOMER_NAME TYPE T_NAME
               VENDOR_NAME TYPE T_NAME
4.     RECORD-Information in rows & columns.
DATA: BEGIN OF BOOKING,
                                ID (4) TYPE C,
                                FLIGHT_DATE TYPE D,
                                NAME LIKE CUSTOMER_NAME,
                                END OF BOOKING.
You can also look into SAP help for more information.
Regards,
Indu.

Difference between busniess Event and object event

Hi All,
Can anyone explain to me what the difference between business event and object event in Beehive?
thanks

Business events are events that are exposed for integration with policies, audit, workflows, user notifications etc.
Object events are an internal-to-beehive system service that are consumed within Beehive Services and are not exposed for application or user consumption.
Richard

Win 2K8 R2 - Group Policy Management - Failed to Open Group Policy Object. You may not have appropriate rights. The network path was not found.

New to Windows Server 2008 R2 Administration.
I setup this Windows 2008 R2 Server on a Dell 2950 Poweredge server and have been migrating users off of an old NT style domain running on Samba 3.6 on CentOS.
I have the domain setup (nicholas.sacredheartsaratoga.org), added users, and have moved users / computers over to the new domain and working.
When attempting to setup Group Policy Objects, I continually get the "Failed to Open Group Policy Object" Error. This is driving me nuts and seems to be a 49 error.. which I have done a ton of research on but none of the suggested fixes seem
to be working.
I've been working at this for a couple of weeks and really need this fixed to be able to set GPO's correctly.
Here is my IPCONFIG /ALL
C:\Users\Administrator.NICHOLAS.000>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : NICHOLAS
Primary Dns Suffix . . . . . . . : sacredheartsaratoga.org
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : nicholas.sacredheartsaratoga.org
Ethernet adapter Local Area Connection 2:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Broadcom BCM5708C NetXtreme II GigE (NDIS
VBD Client) #2
Physical Address. . . . . . . . . : 00-1D-09-27-F1-63
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::542:43f2:2aaf:d903%13(Preferred)
IPv4 Address. . . . . . . . . . . : 10.10.20.21(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 10.10.20.3
DHCPv6 IAID . . . . . . . . . . . : 301997321
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-19-7D-DC-B6-00-1D-09-27-F1-61
DNS Servers . . . . . . . . . . . : 10.10.20.21
NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter isatap.{41653A38-9372-4740-BB03-41950A9C9BC0}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 9:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes

Will post the entire contents of my gpreport as soon as my account is verified... but this is the jist of the error being reported:
Component Status<v:group alt="Error" class="vmlimage" coordsize="100,100" style="width:15px;height:15px;vertical-align:middle;"><v:oval class="vmlimage" fillcolor="red" strokecolor="red" style="width:100px;height:100px;"></v:oval><v:line
class="vmlimage" from="25,25" strokecolor="white" strokeweight="3px" style="" to="75,75"></v:line><v:line class="vmlimage" from="75,25" strokecolor="white" strokeweight="3px" style="" to="25,75"></v:line></v:group>
Component Name
Status
Last Process Time
Group Policy Infrastructure
Failed
2/17/2014 2:50:06 PM
Group Policy Infrastructure failed due to the error listed below.
Logon failure: unknown user name or bad password.
Note: Due to the GP Core failure, none of the other Group Policy components processed their policy. Consequently, status information for the other components is not available.
Additional information may have been logged. Review the Policy Events tab in the console or the application event log for events between 2/17/2014 2:50:05 PM and 2/17/2014 2:50:06 PM.
Registry
(N/A)
1/4/2014 1:45:29 PM
Security
(N/A)
1/4/2014 1:45:35 PM
User Configuration Summary

Difference between domain controllers and group policy objects in GPMC

Similar Messages

Maybe you are looking for