Difference between ecc5.0 and 6.0 new GL functionality

Hi Experts,
What are the differences between ECC5.0 and 6.0 new GL functionality.
If we want to implement IFRS, I think New GL functionality is very helpful, but why sap is recommending only for ECC6.0 new GL functionality, Eventhough this functionality is available in ECC5.0.
Best Regards,
Dharani

Hi,
In ERP 6.0 we can simulate the result of an online split, which can be previewed and analyzed before a document is posted. I think this is not available in mySAP ERP 2004. In ERP 6.0 there are enhanced interfaces and integration with public sector, contract accounting, human capital management, travel management, and material ledger transfer prices. Most of the new functionality in ERP 6.0 is supported in 2004 version of SAP ERP with support package 10.
You can check in the below link...
http://solutionbrowser.erp.sap.fmpmedia.com/Default.aspx

Similar Messages

Difference between ECC5 and ECC6

Hi ,
Can any one let me know the difrence between ECC5 and ECC6, and is there any extra configuration in post-installation steps.
regards!!
Syed

Hello,
There is a post installation document available for both the releases.
you can find ecc5 post installation document at following link http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000591511&_SCENARIO=01100035870000000202&_OBJECT=011000358700000093422005E
cheers,
-Sunil

Difference between "clone" and creating a new object

Hi experts,
What on earth is the difference between:
1)creating a new object by using the "clone()" method and
2) just creating a new object?
Let me be a bit more specific:
if there's a class called "Book" and suppose we've already created an object called "japaneseBook", any difference between "Book spanishBook = new Book();" and "Book spanishbook = japaneseBook.clone()"?
Thank you.
Eileen

The purpose is very obvious. At anytime in the running application, when Objects have been changed, and you desire to make another one of the same kind, you can't use new. You would use clone. The newer Object would have the same values in the variables. Now i got a question.. an important issue.
public class XYZ{
public static int t = 10;
} // default constructor is present by default.
                 //In another portion i have the following..
private XYZ x = new XYZ( ); // private Object!!
     // Now what about this one????
public XYZ x1 = x.clone( ); // public !!, well
What impact of this code can be there to break the rules of good OOP design??? Is it that a clone Object would have the same access of itself (not of its variables) or different one?????????

What are the differences between ECC5.0 and 6.0 new GL functionality

Hi Experts,
What are the differences between ECC5.0 and 6.0 new GL functionality.
If we want to implement IFRS, I think New GL functionality is very helpful, but why sap is recommending only for ECC6.0 new GL functionality, Eventhough this functionality is available in ECC5.0.
Best Regards,
Dharani

Dear,
ECC 5.0 vs. ECC 6.0/SAP ERP 6.0
Functionality not available in the new G/L with mySAP ERP 2004 and ERP Central Component (ECC) 5.0:
Transfer prices
Statistical key figures
Euro translation
Audit Information System (AIS)
Archiving
Data retention tool
Regards,
Chintan Joshi.

Difference between ECC5.0 and SAP 4.7 (ABAP developer point of view)

dear experts,
can anyone tell me the mian difference between ECC5.0 and SAP 4.7 from an abap developer view point.
thanks in advance

Hi,
From an ABAP perspective, there are not many changes, but addition of new classes, methods etc.
Please refer to the link - http://solutionbrowser.erp.sap.fmpmedia.com/
The above link tells about both of the versions.
For more information, you can refer to release notes of ECC 5.0.
Thanks,
Srinivas

Major differences between GL and New GL concepts

Hai,
Please let me know the major differences between old and new gl concepts and if possible explain with few examples....
Thanks in advance.....
Regards
Moderator: Please, read and respect SDN rules

Hi
Refer to the link below-
http://www.sap.com/solutions/business-suite/erp/financials/pdf/BWP_New_Gen_Ledger_Acct_Functions.pdf
Regards
Milind

Looking for new laptop what are the differences between pro and air? Besides size. Does the air preform like the pro?

Looking for new laptop what are the differences between pro and air? Besides size. Does the air preform like the pro?

The NEW macbook Pro and Air are EXTREMELY close in form factor
The newest macbook Pro is essentially a larger macbook Air with Retina display and options for speed in increasing prices up to an independent graphics and quad core processor.
both Air and new Pro now have PCIe SSD and permanent RAM.
The Air is the lightweight portable form factor, fast to boot and shut down, but with longer battery life than any of the macbook pro in 13"
Now the new macbook Pro and macbook Air are extremely close in form factor and nature.
both have 802ac wifi
both have permanent RAM, no superdrive
both are slim profiles and SSD
The only real differences now are (in the most expensive Pros) faster processors and quadcore processors and top end model autonomous graphics.
....and of course the retina display
both are now "very good for travel"
Other than features the form factor of the Air and Pro are VERY close now,....so now its merely a matter of features and price more than anything.
You need an external HD regardless of what you get for backups etc. Drop into an Apple store and handle both and make your choice based on features, such as Retina or non-retina, .... both at a distance now look like the same computer.
The Pro weighs more, ....but nowhere near what it used to just a month ago on the older macbook Pros
The NEW macbook Pro is a different creature entirely than the older macbook Pro, .....the new Pro is thicker than the Air, but id frankly call the NEWEST Pro a "macbook Air with Retina display" , or
Maybe a “macbook Air PRO with Retina display”
Instead of Air VS Pro now,.....its really a smooth transition from Air to pro without comparing say, 2 different creatures, now its like contrasting a horse from a race horse.
Either one in 8gig of RAM (preferably)... the 4gig upgrade costs very little, the I7 you will notice only 15% faster on heavy applications over the I5, and NOTHING on most APPS.....I5 has longer battery life.
As you see below, the non-Retina 13" AIR is 82% of the Macbook with Retina display in resolution
there is no magical number of pixels per inch that automatically equates to Retina quality.
http://www.cultofmac.com/168509/why-you-might-be-disappointed-by-the-resolution- of-those-new-retina-display-macs-feature/
A huge internal SSD isnt a game changer for anything, you need an external HD anyway
what you WONT READ on Apple.com etc. is that the larger SSD are MUCH FASTER due to SSD density
"The 512GB Samsung SSD found in our 13-inch model offers roughly a 400MB/s increase in write speeds over the 128GB SanDisk/Marvell SSD"
http://blog.macsales.com/19008-performance-testing-not-all-2013-macbook-air-ssds -are-the-same
Here is an excellent video comparison between the 11” I5 vs. I7 2013 Macbook Air.
http://www.youtube.com/watch?v=oDqJ-on03z4
http://www.anandtech.com/show/7113/2013-macbook-air-core-i5-4250u-vs-core-i7-465 0u/2
I5 vs. I7 performance 13” Macbook Air 2013
Boot performance
11.7 I5 ……11.4 I7
Cinebench
1.1 I5….1.41 I7
IMovie Import and Opt.
6.69 I5….5.35 I7
IMovie Export
10.33 I5…8.20 I7
Final Cut Pro X
21.47 I5…17.71 I7
Adobe Lightroom 3 Export
25.8 I5….31.8 I7
Adobe Photoshop CS5 Performance
27.3 I5…22.6 I7
Reviews of the newest Retina 2013 Macbook Pro
13”
Digital Trends (13") - http://www.digitaltrends.com/laptop-...h-2013-review/
LaptopMag (13") - http://www.laptopmag.com/reviews/lap...play-2013.aspx
Engadget (13") - http://www.engadget.com/2013/10/29/m...-13-inch-2013/
The Verge (13") - http://www.theverge.com/2013/10/30/5...ay-review-2013
CNet (13") - http://www.cnet.com/laptops/apple-ma...-35831098.html
15”
The Verge (15") - http://www.theverge.com/2013/10/24/5...w-15-inch-2013
LaptopMag (15") - http://www.laptopmag.com/reviews/lap...inch-2013.aspx
TechCrunch (15") - http://techcrunch.com/2013/10/25/lat...ok-pro-review/
CNet (15") - http://www.cnet.com/apple-macbook-pro-with-retina-2013/
PC Mag (15") - http://www.pcmag.com/article2/0,2817,2426359,00.asp
Arstechnica (15") - http://arstechnica.com/apple/2013/10...-pro-reviewed/
Slashgear (15") - http://www.slashgear.com/macbook-pro...2013-26303163/

Technical difference between ECC5.0 and ECC6.0

Hi everyone,
Can anybody tell me whats is the Technical difference between ECC5.0 and ECC6.0.
I am doing upgrade from ECC5.0 to ECC6.0 in Retail.
Regards,
Divya

Dear Divya,
When it is a technical upgrade from a lower version to ECC6.0, many objects like includes, Function modules, reports, OSS notes, DDIC objects, BDC/Print programs, SAP scripts, screens will get affected due to the upgradation. So we need to check with all these objects.
u2022 We will encounter short dumps while executing certain programs. This may be due to the usage of obsolete function modules or Unicode errors.
u2022 The BDCs in the upgraded version will become defective as many of its screen field names will be changed during version change.
u2022 Program texts of many programs will be lost. They have to be restored.
u2022 In case of tables, enhancement category has to be provided.
u2022 There is a possibility of losing the variants during upgradation. So care should be taken to retain them before upgradation.
u2022 ECC6.0 is case sensitive, so many of the interface programs will fail to transfer (FTP) files between systems. These objects have to be changed so that the commands passed to the external system be UPPERCASE.
So a developer should be aware of the following:
u2022Unicode programming is followed in ECC6.0. So we need to be aware of it to rectify certain Unicode errors which are likely to occur.
u2022You have to run the transactions SPAU & SPDD to check for list of standard & custom objects that needs modification in the upgraded version.
Check the below link to find more details on usage of SPAU & SPDD transactions
http://help.sap.com/saphelp_nw2004s/helpdata/en/60/d6ba7bceda11d1953a0000e82de14a/content.htm
u2022Should be aware of the objects that have become obsolete in ECC6.0. They have to be replaced by appropriate ones.For eg.:
--> The WS_* function modules have been replaced by GUI_* FMs in ECC6.0 as WS_* FMs have become obsolete from 4.7
-->Tables like TVARV & TTREX have been replaced by TVARVC & TTREXN respectively in ECC6.0.
u2022In case of tables, we need to specify the Enhancement category.
u2022Due to upgradation, we will lose out some variants. So we should take a back-up before proceeding with the upgradation.
u2022In case of BDC programs, some field names will be changed. So they have to be named appropriately.
Please check with the below links for more details:
SAP Upgrade guide:
http://www.thespot4sap.com/upgrade_guide_v2.pdf#search=%22upGRADE%20STEPS%20-%20SAP%22
From ABAP's perspective, the following link helps you:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5ac31178-0701-0010-469a-b4d7fa2721ca
For technical upgrade inputs:
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/07/upgradeFROMR3TOmySAPERP-PARTII&
https://wiki.sdn.sap.com/wiki/display/profile/UPGRADEFROMR3TOmySAPERP-PARTIII
Hope this helps you.
Regards,
Rakesh

Differences Between ECC5.0 and ECC6.0 in Controlling

Sir.
can you Explain?
Differences Between ECC5.0 and ECC6.0 in Controlling
Regards

Hi There,
Check the below link:-
[http://solutionbrowser.erp.sap.fmpmedia.com/Search.aspx]
here enter your source system and target system and the differences will be listed.
Regards,
Gaurav

Difference between Null and null?

What is the difference between null and NULL?
When is each used?
Thanks,

veryConfused wrote:
There is a null in java, but no NULL. null means no value. However, when assigning value, the following is different:Although the empty String has no special role. Null means, the referential type is not assigned (doesn't refer) to a specific object. The empty String is just another object though, so seeing it or pointing it out as something special when it actually isn't at all (no more special than new Integer(0) or new Object[0]) just adds to the confusion.

The difference between N80 and N80IE ?

What is the difference between M80 and N80ie?

02-Jan-2007
07:45 PM
korngear wrote:
The Nokia N80 Internet Edition is a new version of this handset with the same hardware as the normal N80. It is due for release in Q4 of 2006 and will be available in Patina Bronze or Pearl Black, and has the following additional software included.
Yahoo Go! for Mobile
Flickr
Some Amazon Branded Software
'Download!' App management
Internet Telephone - SIP VOIP Frontend
WLAN Wizard
Gizmo VOIP - Gizmo Project VOIP Frontend.
\\en.wikipedia.org//
@Korngear
Thanks.
Could N80 be upgraded to N80IE?

What is difference between modify and update i am using

hi
what is difference between mofify and update
my requiremen is to have three condition checkec while mofifying or updating from a internal table
the three fields are
cus no
status
date these all are primary key in the database table
so which sould i use modify or update
there might be entry already existing in database table or new entry to be created if already existin it should check on the primary keys and updatat if not it should add a record
pls suggest whihc to use and how to implement the check on teh threee primary key
like if modify ztable from table it_test
now where condition ? can be used or not with modify? and if yes how
if not should i use update will update create a new entry if no entry is there and please give syntex
regards
Arora

Hi Nishant Arora,
Modify: It works in performing two actions.
They are: Insert + Update.
For Example If a record that is exited in database, so you are modifying that record, it updates that particular record.
Similarly, If the is not existed in the database, you are modifying it, it inserts a new record.
Update: Update means just it updates the status, I mean it only updates the record. It doesn't inserts any new record if that particular record is not present in the database.
These are the cases you need to write these statements.
Syntaxes: :
Go through this links please.,
http://help.sap.com/saphelp_nw04/helpdata/en/e7/968aa8b2384dd9835f91e7f8470064/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/fc/eb35eb358411d1829f0000e829fbfe/content.htm
Reward points if useful
Cheers,
Swamy Kunche
Edited by: Swamy Kunche on Jun 11, 2008 2:41 PM

What is the difference between apps and applications?

I have an application that I've been running on my older Mac. Now that I have a new MacBook Pro, I have to reinstall new software that is compatible. When I go to the vendor website I see an application I can download or a link to the Mac App Store. Is an application different than an app? When should you download them from a vendor website and when should you go to the app store? Do apps end up in the Launchpad and an application in your Applications folder? I can't seem to find information on what is the distinction. Are they actually two different things? Any help would be appreciated.

No difference between apps and applications. If you download the app from the Apple AppsStore you have better security and a conveninet place to have all your downloads. Nothing wrong with downloading from a trusted developer though.
EDIT: Yes they will either wind up in your Download folder as a .dmg you will have to double-click on to install, or most app store apps will install to your Applications folder.

What is the difference between PUSH and FETCH

I am a little confused. I use my iphone for both my personal POP email accounts and my business exchange account. I am trying to save as much battery as I can so I turned off push and set everything to manual...but now when I try and get may mail....it either says "connecting" or "checking for new mail" at the bottom of the screen and nothing happens from there.
What is the best way to setup this situation for the most battery life? I don't need it to automatically download emails just when I open the email accout would be nice.
I also noticed that when I delete an email from my iphone on my exchange account, it also deletes is on my desktop at work...I need to turn this off...is it possible?

Hi maxum25,
The difference between push and fetch is that:
When using push, the server sends a signal to the iphone and lets it know that an email is coming its direction. Kind of like receiving a call. The iphone does not need to do anything except receive the email.
When using fetch, the iphone has to wake up every so often and send a request to the server to see if there is any new email waiting for it on the server to download. This takes more time because the iphone sends a request, the server says yes there is some, the iphone says ok give me the new email.
Now the exchange email uses active sync to keep all changes on the exchange server and mobile device in sync. This is automatic and is the nature of exchange and active sync. In order to keep this from happening you would need to talk to your IT dept. and see if they have an imap or pop alternative. Even using imap reflects the changes back to the server.
Hope this helps.

What is the difference between start() and run()

Hi:
what is the difference between start() and the run()???
in my app, i have
Console.debug( "starting thread to listen for clients" );
_server = new Server( this );
_server.start();
_server extends Thread..
why everytime i use server.start(); my app will terminate on it is own, even though in my servr.run() method, i have a while loop
and if i call _server.run() explicitly in my code, that while loop will be in execution
can someone let me know??
thnx

what is the difference between start() and the
run()???start() is a method on Thread that tells it to start.
run() is a method in the object that the thread executes.
why everytime i use _server.start(); my app will
terminate on it is own, Err.... I'm not convinced this is true. It'll throw an IllegalThreadStateException, if you try to restart an existing thread.
If that's what you're saying.
even though in my _servr.run()
method, i have a while loopI don't see the connection. Are you saying that the while loop never terminates, and you don't see why the thread is terminating?
and if i call _server.run() explicitly in my code,
that while loop will be in executionIf you call server.run() explicitly, then run() will be executed in the same thread that you called it in.

Difference between ecc5.0 and 6.0 new GL functionality

Similar Messages

Maybe you are looking for