Difference between factory excise invoice and Depot Excise Invoice

Hi
Is there any difference in invoice calculation part in excise invoice through Factory sales and excise invoice through depot sales?I know the processes but not sure about the excise calulation in these.

Hello,
From the point of view of Customer, there is no difference, because he can claim Excise Credit to the extent he has received in your Excise Invoice (factory or Depot).
From your point of view, as far as Excise Calculation is concerned, there is one basic difference. In Factory Sales you can create new Excise Liability (Say you have received Excise Credit from Vendor as Rs. 100 but you can pass Rs. 120 to Customer by paying the difference to Excise authorities).
While in Depot Sales you cannot create additional Excise liability & only pass the Excise Credit that you have received from source (Factory In this case).
Hope this helps,
Thanks,
Jignesh Mehta

Similar Messages

Difference between J1IEX Part 1 and J1IEX Part 2 in local excise invoice

Dear all
difference between J1IEX Part 1 and J1IEX Part 2 in local excise invoice or local po
regard
nabil

>
sayednabil wrote:
> Dear all
>
> difference between J1IEX Part 1 and J1IEX Part 2 in local excise invoice or local po
>
> regard
> nabil
Hi Syed,
J1iex Part1 is the term referred to with the Part1 registers in Indian Excise scenario.
There are basically two type of Part1 registers RG23A-1 & RG23C-I based on material type A(raw material) or C(Capital Goods)
Part1 register contains only the material quantity & unit of measure.
Similarly The J1IEX Part2 is referred to RG23 Part2 registers which are again RG23A-2 & RG23C-2 based on material types.
Part2 registers are containing only Excise duty part which has been taken credit.
hope it assists...

Stock transfer between Excise Plant and Non Excise Plant

Scenario : Stock is imported from say Singapore. One of the import duties can be claimed back as CVD and pass the benefit to customer.
Requirement : Stock transfer between Excise Plant and Non Excise Plant
Question : i) If I do stock transfer from Excise plant to non-excise plant, can I transfer the CVD amount which I captured in RG23A - Part1/Part 2?
ii) If I do stock transfer from Non- Excise plant to Excise plant, can I get the benefit of CVD and pass on that benefit to customer?
Pls let me know the possiblity of above two in SAP and Legally?
thanks in advance
Sridevi

Ok! Thanks for the replies. Pls let me allow to elaborate the earlier requirement.
Trading Goods say A gets imported to India. Issue was :
1) We need to issue Excise invoice only to few customers. So, we thought of treating one batch as excise batch and remaining as non excise batch per day.
2) Stock price varies every day being batch wise produced in say Singapore.
Means Mateiral is A but price varies evey day and because of the duty payment also gets varied. For a single material master we do have different prices for each batch and also excise/non excise scenario. So, how can I get material value for each of this combinations in the system and how to identify the same.
Because of the above reasons, we thought of having two plants. I can not configure depot here because cleint requires single plant for each state as of now.
Am I clear? If not, pls let me know,
regards
Sridevi

T-code for cancelled Invoice and cancelled Excise Invoice

Dear Guru,
kindly let me know the T-code for cancelled Invoice and cancelled Excise Invoice.
Wishes,
Abhishek

Hi Abhishek,
I am not aware of any T-code through which you can see the cancelled invoice. I think either you have to go for development (SQVI)
or
Extract the list of your all billing document like billing document created from 01.01.2010 to 22.04.2010
Now go to SE16 --> Table VBFA --> Give your billing document number in field "Preceding Doc." --> and in the field "Subs.doc.categ." --> choose entry "N Invoice cancellation" --> system will show you all the entries for which cancellation billing document has been created.
or
Go to SE16 --> Table VBRK --> enter your billing document list --> In the field "Posting status" --> Choose option "E Billing Document Canceled"
Hope it helps,
Regards,
MT

Difference between Parked invoice and posted park invoice.

Dear All,
I am trying to create a new program to extract the invoices posted by MIRO and MIR7. I have no problem to find invoices posted by MIRO in RBKP and RSEG.
However, as currenty one user will use MIR7 to park invoices and another user will use MIRO to post the invoices, I don't know how to sparate the parked invoice and posted park invoice. C's I have found that the parked not posted invoice and posted park invoice were all displayed in RBKP with transaction code MIR7.
Thank you very much
Emma

Hi,
*Park*
If the Invoice document is missing some information that is required for posting. In this case we will park the document. Here some preliminary checks will be performed. Balance might not be zero.But in this case updates were performed.
*Post*
The invoice was posted online and verified as being correct(Balance must be Zero). Updates were made.
Please use RBKP-RBSTAT field to find out the different type os status.
I hope this helps.
Regards
Ravinagh Boni

Excisable Warehouse and Non Excisable warehouse

Dear SAP B1 Financial Experts
I would like to know, Y in SAP B1 is differentiating Excisable warehouse and Non Excisable warehouse.
In SAP B1 We are already classifyin the item (Excisable / Non_Ex) in the item master data itself. In that case what is the purpose of differentiating the item based on the Warehouse.
For Eg : Excise duty can calculate only for excisable item which is in excisable warehouse. and also Excisable warehouse cannot accept Non excisable item.
Actually what is the basic theory applied here. what is difference between an Excisable warehouse and Non Excisable warehouse.
Please explain me in detail.
Thanks
Regards

Hi,
we are defining the Excisable warehouse and Non Excisable warehouse for the purpose of excise invoice generation
And its very clear that we need chapter id, material type notification availed serial no, provisional assessment no and assessable values are different to each item (depends on the items), while processing excise.
while reporting all information need for both external and internal reporting.
regards,
Sanju M S

What is the difference between PO Charge Account and PO Accrue Account ?

Hi
On Requistion's Distribution screen , there is a A/c codes exists : PO Charge , Accrue, Budget & Variance .
Can anyone explain me the exact purpose of the same and what is the difference between PO Charge Account and PO Accrue Account ?
regards
Thanks
SD

Hi Sanjay,
Here is the OA help (11i) :
Entering Purchase Order Distributions:
6. Enter the purchasing accounts. When you save your changes in this window, Purchasing uses the Account Generator to automatically create the following accounts for each distribution:
Charge: the account to charge for the cost of this item in the purchasing operating unit
Accrual: the AP accrual account in the purchasing operating unit
Variance: the invoice price variance account in the purchasing operating unit
Destination Charge: the account to charge for the cost of this item in the destination operating unit
Destination Variance: the invoice price variance account in the destination operating unit
Note: The last two accounts are created only if the receiving destination operating unit is different than the purchasing operating unit and there is a transaction flow defined between the two organizations.
If you are using encumbrance control, Purchasing also creates the following account for each distribution:
Budget: the encumbrance budget account
The Account Generator creates these accounts based on predefined rules. See: Using the Account Generator in Oracle Purchasing.Hope it helps
Xavier

Difference between SAP 4.7 and ECC 5.0

hi frnds
.what is the difference between SAP 4.7 and ECC 5.0?
regards

Hi,
Following are the basic differences as far as MM Module is concerned
Pickup list - Batch where-used list display in transaction MB56
u2022 Until release 4.7, the top-down and bottom-up analyses in the function pickup list for batch where-used list (transaction MB5C) were displayed only in the form of simple output lists. As of release 6.00 of SAP ERP Central Component, the function pickup list for batch where-used list branches to the batch where-used list itself (transaction MB56).
u2022 In addition, user can define how the data in the batch where-used list is displayed, in the initial screen.
u2022 User can use all the settings available in the batch where-used list. For example, he can expand transfer posting or display vendor batch. However, it is not possible to limit the selection to valid plants in the initial screen of the pickup list.
Usability enhancements for transaction MIGO for the posting of goods movements
u2022 For goods movements that refer to purchase orders as reference documents (for example, goods receipt, goods issue, subsequent adjustment), user can specify the ordering plant as an additional selection criterion directly next to the purchase order number and the item number.
u2022 There is a new default value: "copy account assignment fields." When entering other goods receipts, user can copy existing account assignment data from the previous item to use as the default values for a new item. To do this, user has to set the copy account assignment fields indicator in the default values.
u2022 User changes the default values in the menu path "Settings -> Default Values."
u2022 Goods movement is monitored with reference to a material document. When you enter the following goods movements, it is possible to specify a material document, such as the following, as the reference document:
Goods receipt
Goods issue
Transfer posting
Remove from storage
u2022 Note that these material documents must be documents that have arisen from a goods movement without reference ("Others") and that are not reversal documents.
New report : display list of invoice documents (MIR5)
u2022 Logistics invoice verification offers a new report display list of invoice documents (RMMR1MDI), w hich user can use to display such a list (Transaction is MIR5).
u2022 As an addition to the existing program invoice overview (transaction code MIR6), user have extended selection criteria and display options. For example, on the initial screen user can make selections by one-time customers, invoice gross amount, and entry date.
u2022 User can also show an expert mode, which enables him to select at plant level by FI document, GL A/c posting, and Material Posting.
u2022 In the output list, the report shows both posted and held invoices.
u2022 It does not show invoices without a corresponding FI document; such as invoices planned for verification in the background or which the software has already verified as containing errors.
Requirement prioritizations in materials management
u2022 With Requirement Prioritization functionality user can assign requirement urgency at item level in purchasing and reservation documents.
u2022 The software determines the relevant requirement priority (overall priority) of a material requisition from the combination of requirement urgency group and organizational priority.
Mass maintenance of outline agreements
The following two transactions available:
u2022 Mass maintenance for contracts: transaction code MEMASSCONTRACT
u2022 Mass maintenance for scheduling agreements: transaction code MEMASSSA
Commitment plan for purchase contracts
u2022 With the function of the commitment plan for purchase contracts, it is possible to pre plan value consumption for a purchase contract.
u2022 To this end, a commitment plan is generated for each document item of the relevant contract.
u2022 This commitment plan itself can have any number of items.
u2022 User can define a value and a validity date for each commitment plan item.
u2022 This enables user to pre plan different values for different periods of time.
u2022 The software generates an earmarked fund document for a defined commitment plan item.
u2022 This earmarked funds document can in turn contain several different items with different account assignments.
u2022 The software adopts these account assignments from the item account assignments of the commitment plan.
u2022 If a purchase requisition or purchase order references this contract, the earmarked funds document is copied into the purchase order, and the account assignment is adopted from that document.
u2022 Account assignment to a different account assignment object is then no longer allowed.
Availability check in "Enjoy purchase order and requisition"
u2022 Display and checking of availability are invokable separately in the "Enjoy purchase order and requisition" function, in line with the software behavior on the sales side.
u2022 User invoke the display and checking of availability in the "Enjoy purchase order" function (transaction code ME21N) and the "Enjoy purchase requisition" function (transaction code ME51N) as follows:
To display the availability overview, choose the menu path "Environment -> Availability." - To check availability, choose the "Check Availability" icon.
Until this release, if user carried out the availability check for an item of a stock transport order, the software adopted confirmations as per the desired date/time only.
u2022 Two settings are possible with availability check:
Confirmation as per desired date/time (this is the standard setting and corresponds to previous software behavior)
Delivery proposal - Full confirmation
External services: putting service items in the purchase order on hold (changed)
User can put purchase orders with service items on hold if these items do not contain any errors. Purchase orders with service items can also be put on hold if errors occur only at header level or as a result of the availability check.
Customizing transactions OX18 replaced by view
The assigned customizing transactions have been replaced by the following view in the following implementation guide activity in customizing for the enterprise structure: Assign plant to company code: transaction OX18 replaced by view V_T001K_Assign. One will find this activity in the implementation guide under the menu path "Enterprise Structure -> Assignment -> Logistics General -> Assign Plant to Company Code."
Goods receipt: new movement types in inventory management
The following new movement types are available in inventory management:
107: Goods receipt to valuated goods receipt blocked stock
109: Goods receipt from valuated goods receipt blocked stock
Prepayment of invoices
This functionality is characterized as follows:
u2022 User can trigger prepayment of vendor invoices in logistics invoice verification.
u2022 User use the prepayment function for vendors with whom organisation has a good, long-standing relationship.
u2022 The function enables payment soon after issue of the invoice and full exploitation of the date of required payment and existing cash discounts, by posting the vendor liabilities, taxes, and cash discounts in financial accounting in advance.
u2022 The software executes the payment of the invoice regardless of the relevant goods receipt and the outcome of the invoice verification check.
u2022 Most logistics invoice verification standard functions are not affected by the prepayment function.
u2022 When the software posts invoices, it continues to execute the standard checks.
u2022 If the software has already posted the prepayment document, user can make only restricted changes to the header fields of the invoice.
u2022 To ensure adequate and orderly financial accounting postings, a prepayment clearing account has been added to SAP ERP Central Component.
u2022 Upon prepayment, the software debits this account and then settles the account again after executing the check.
Purchasing accounting information to the former SAP Business Information Warehouse
u2022 With the transfer of the purchasing account information to the former SAP Business Information Warehouse component (whose functionality is now part of SAP Net Weaver), it is now possible to maintain Info Cubes, reports, and queries that can determine how and where the costs from purchasing documents have been assigned and controlled.
u2022 As part of the software, a new data source (2LIS_02_ACC) has been created and the purchasing extraction process extended to cover the account information for purchasing orders, schedule agreements, and contracts.
Automatic settlement of planned delivery costs with evaluated receipt settlement (MRDC)
u2022 A new report (RMMR1MDC), available within the logistics invoice verification, can be used to automatically settle planned delivery costs.
u2022 To invoke the report, from the SAP easy access screen, choose the menu path "Logistics -> Materials Management -> Logistics Invoice Verification -> Automatic Settlement -> Automatic Delivery Cost Settlement" (transaction code MRDC).
u2022 Functionality for report RMMR1MRS is enhanced.
u2022 User can use the report RMMR1MRS, "Evaluated receipt settlement with logistics invoice verification (LIV)" (transaction code MRRL), to settle planned delivery costs in addition to goods and service items within logistics invoice verification.
u2022 To do so, set the relevant indicator on the initial screen of the report.
Parking service items
It is now possible to put service orders without errors or with commitment errors on hold.
Report MB5B : Stock on Posting Date
u2022 This Report is available with u201CNon-Hierarchyu201D display option which provides details of Opening, Receipt, Issue and Closing balances of Stock with quantity and value both for a given period.
u2022 This functionality is not available in Release 4.7.
Stock Transfer Between Storage Locations
u2022 Function of stock transport orders between storage locations is available from ECC 6.0 onwards.
u2022 As a result of which user can input issuing storage location with supplying plant.
u2022 Facility of using different delivery types for different issuing storage locations is available.
u2022 Shipping Point data can also be determined based on the issuing storage location
Regards
Priyanka.P
AWARD IF HELPFULL

Difference between "Order to Delivery" and "Order to Cash"

Hi,
This could be a basic question. But, can any one tell me the difference between 'Order to Delivery" and "Order to Cash" Process.
Thanks
Anitha

hi
Order to cash cycle in SD starts with Inquiry -> Quotation -> Order -> Delivery ->Picking-->Post Goods Issue -> Invoice -> Accounting Document generation
For Inquiry
Doc. Type: IN
T.Code: VA11(create), VA12(change), VA13(display)
Process: Quotation
Doc. Type: QT
T.Code: VA21(create), VA22(change), VA23(display)
Process: Order
T.Code: VA01(create), VA02(change), VA03(display)
Doc. Type: OR
For Delivery
Doc. Type: LF
T.Code: VL01N(create), VL02N(change), VL03(display)
For Billing
Doc. Type: F2
T.Code: VF01(cre ate), VF02(change), VF03(display)
For Accounting Document
T.Code: FB03(display)
where as ORDER TO DELIVERY
Delivery Order is the term of core team normally used for Delivery. Ideally insome of the legacy, they do not create Sales Order & use the term Delivery Order for Delivery.
InSAP, we mornally map it as Sales order --> Delivery --> Post Goods issue --> Billing.
At times we have to give meaning to the term sprecified by core team / end user & arrive at SAP terminology.

Difference between client dependent table and client independent table

hi all,
i m new in sap pls tell me the difference between client dependent table and client independent table.
tell me in detail.
thanks and regards
vikas saini

HI
Client dependent Means if you create that data in one client is limited to that client only and it is not accessable in other clients
Like SAP SCRIPTS and STD texts data
where as Client Independent means the data if you create in one client that is available in that as well as in other clients
Like SMARTFORMS, All dictionary Objects data and Repository objects data like Programs, Fun modules, tables etc..
There is no specific reason behind why scripts are client dep[endent and smartforms are client independent!!!
As for SAP -- Scripts are called client dependent because if you create client in say,200 it would be available in that only.If you want to test the script in client 300 then it won't be there,you will have to go to transaction se71 in 300 .Then Utilities-> Copy from client.Give the source as 200 & form name(i.e. script name) & copy.
Few more reasons why....? Please read below:
SAPscript technology is based on a mainframe product from the 1980s.SAPscript forms have always been -- under the hood -- relatively passive objects, with minimal embedded logic. These forms were designed to be driven and controlled by ABAP programs, much in the way ABAP programs read in database tables to produce reports;
if you ever download a SAPscript form (e.g., via utility program RSTXSCRP), and look at the portable text file it produces you'll see what I mean.
Many text objects (e.g., invoice header texts) are bound directly to documents which are client-dependent, so it makes sense for these text objects to also be client-dependent. From a complexity standpoint, SAPscript forms are close enough to these text objects where I can see how it made sense at the time to make them client-dependent too.
What is client dependent and Client Independent
https://www.sdn.sap.com/irj/sdn/forums

What is the difference between generate partner profile and creat partner

What is the difference between generate partner profile and creat partner profile ?

Create Partner ProfilesAlthough partner profiles are usually created automatically, because of the unusual inbound and outbound profiles needed on the same system, the manual generation of certain profiles is required.
The following subsections describe the partner profile settings for the standard client (assumed here to be ALExxxCyyy), as well as for the corresponding dummy client (assumed to be DUMxxxCyyy). The dummy client partner profiles should have been generated by the automatic generation process completed previously. Nevertheless, these should be checked to ensure that all profiles exist.
Generation of Partner Profiles
The following messages should be added to the 4xx-ORDR model for ALExxxCyyy to DUMxxxCyyy on the reference client:
ORDERS
ORDCHG
ZINVRV
ORDRSP
INVOIC
FIDCMT
The partner profiles should first be generated using the standard auto-generation procedure on the reference client (for SYNCH messages to be created).
This model should now be distributed to the both ALExxxCyyy and DUMxxxCyyy.
The partner profiles should now be generated on the client being configured (i.e. yyy) using the auto-generation procedure defined in the standard ALE configuration procedures.
Generate partner profiles for sending system. (Can only do this if at least 1 message type exists against the sending system's LS). This automatically generates the port if the LS and RFC name are the same.
generate partner profiles tcode BD82
creating partner profiles tcode WE20
 There are two methods for maintaining the partner profile:
 Maintain partner profile manually:
To navigate to the partner profile in the sender system, choose Partner profile -> Partner type of Logical System and click on the required Target system. Under Outbound parameters, choose the Create outbound parameters icon, and enter the values for the outbound parameters according to the slide Sender: Partner Profile (outbound).
To navigate to the partner profile in the sender system, choose Partner profile -> Partner type of Logical System and click on the required Sending system. Under Inbound parameters, choose the Create inbound parameters icon and enter the values for the inbound parameters according to the slide Sender: Partner Profile (inbound).
 Generate partner profile:
Prerequisite: The current distribution model is distributed to all participating systems.
In the sender system, choose: Generate Partner Profile, then check the result in the partner profile (outbound)
In the sender system, choose: Generate Partner Profile, then check the result in the partner profile (inbound)
Regards
Vasu

The difference between VGA, DVI-D and ADC?

Hi.
The difference between VGA, DVI-D and ADC and which should be used with a T244 widescreen monitor into a Quicksilver G4 with a GeForce2 MX nVIDIA (0x10de) card. What's a good upgrade card if the above is not good enough?
Thank you for your input.
Walter

Look at this link http://en.wikipedia.org/wiki/DigitalVisualInterface
 Cheers, Tom

The difference between AIR-ANT5135D-R and AIR-ANT5135DB-R

Hi,
Anyone know what is the difference between AIR-ANT5135D-R and AIR-ANT5135DB-R ?
From the dynamic configuration tools for 1252 and 1242, AIR-ANT2422DB-R is inside one of the antenna option.
However, I can't find it in the "Cisco Aironet Antennas and Accessories Reference Guide"
http://www.cisco.com/en/US/prod/collateral/wireless/ps7183/ps469/product_data_sheet09186a008008883b.html
Inside the document there is only AIR-ANT5135D-R.
likewise for the 2.4 GHz, AIR-ANT2422DB-R is inside the dynamic configuration tools and not inside "Cisco Aironet Antennas and Accessories Reference Guide"
Any help would be appreciated
Thanks,
Richard

Found the difference, AIR-ANT5135DB-R and AIR-ANT2422DB-R are non-articulating antennas.
Thanks!
Richard

The difference between Telepresence Content Server and MSE 3500

Good day! Could someone explain me what's the difference between Telepresence Content Server and MSE 3500? Why do I need to obtain two these devices for sorting out my tasks? I want to understand gist of the first and the second devices.

In addition to what Jonathan posted above, here is a Capture Transform Share Solution Guide that goes over a little bit of what the TCS and MXE are and some possible deployment scenarios.
In short, TCS is used to record video conferences or lectures that can be streamed on demand or live using various streaming or distribution methods. One such distribution method is using the MXE 3500 to ingest the recordings from TCS and convert them to different media types and add in-video content such as logos etc. However, from the MXE, you can't send the video back to the TCS for viewing, you'd need to send that off to another viewing portal such as Show and Share.

What is difference between Service map iview and Workset Map iview

Hi Experts,
Can anyone tell me the difference between service map iView and Workset Map iView.
When I am creating these iViews, its seams both are same. I canu2019t find difference still, can anyone help me out of this
Thanks in Advance
Janardhan

Hi,
Service Map Iview:The Service Map iView is an ERP-specific variant of the portal Workset Map iView. It serves as a central point of entry and guided access to the services of SAP service modules such as the Manager Self Service (MSS) module, or the Employee Self Service (ESS) module.
Workset Map iview:A Workset Map is the equivalent of a site map, providing users with explicit information on the functionality that is available in a given workset. It is based on an iView, and serves as a central point of entry and guided access to the contents of a workset.
if you want to more info pls go thr the below thread
Workset Map iView
i hope it will help you
Thanks,
Sreeni.

Difference between factory excise invoice and Depot Excise Invoice

Similar Messages

Maybe you are looking for