Difference between Fixed order qty and Fixed Lot multiplier
Hi All,
Can someone explain me the difference between Fixed order qty and Fixed Lot multiplier in general planning tab at item level with example.
Hi,
Thanks for the reply. Just bit more clarification i need to understand the difference.
Like for example let us assume two cases.
Case 1:- order less than Fixed order qty (Fixed order qty =50 and the FIxed lot multiplier =50)
Let us assume that we have set Fixed order qty equal to 50. We have a physical order of 40 then still MRP will place a order of 50 only. In case of tumhi snagaSame is the case of Fixed lot multiplier it will place a order of 50
Case 2:- order greater than Fixed order qty (Fixed order qty =50 and the FIxed lot multiplier =50)
Let us assume that we have set Fixed order qty equal to 50. We have a physical order of 60 then still MRP will place a order of 50 twice. Same is the case of Fixed lot multiplier it will place a order of 100.
eventually we are doing the same in both the case so what is the exact differnece.
Similar Messages
-
Difference between service order quotation and service contract quotation
Hi,
Can any one differentiate service order quotation and service contract quotation??
appreciated with points
Regards,
Nagi ReddyService Order:
A service order is a short-term agreement between service provider and service recipient, in which one-time services are ordered by the service recipient and resource-related billing performed upon completion. Such an order could be, for example, to maintain or repair some equipment, making it necessary to send a technician along with spare parts. These services are usually billed.
Service Contracts:
Service contracts are outline agreements with business partners which define services offered for a particular period. You support service contracts by processing contract-based and planned services.
Service contracts represent long-term service agreements with customers in relation to the content and scope of services guaranteed within specific tolerance limits for certain parameters, for example, within a predefined timeframe.
I hope this helps -
Difference between fixed focus and auto focus?
what is difference between fixed focus and auto focus and which is better?
Thanks for the advice Phonehacker, this Forum is so helpful on a variety of subjects, and the users are so patient, that's why I enjoy it so much My diet is now perfectly organised and my larder is full of Brown Bread and Red Wine
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution' -
What is the difference between Fixed Costed, Costed and Distributed?
Hi Friends,
Can someone please tell me the difference between Fixed Costed, Costed and Distributed?
ThanksCheck under heading 'Costing' on HRMS guide, link is here
http://docs.oracle.com/cd/A60725_05/html/comnls/us/per/defelw04.htm
thanks -
"difference between sales order and scheduling agreement "
hi,
i want to know difference between sales order and scheduling agreement and where use scheduling agreement & where sales order ?
please help
amitHi Amit,
Its not hard to find this info at help.sap.com
Sales Order
Definition: Request from a customer to a company to deliver a defined quantity of products or provide a service at a certain time. The sales area that accepts the inquiry is responsible for completing the agreement.
Scheduling Agreements
Purpose
A customer scheduling agreement is an outline agreement with the customer containing delivery quantities and dates. These are then entered as schedule lines in a delivery schedule. You can either create schedule lines when you create the scheduling agreement or you can create them later.
You fulfill a scheduling agreement by creating the deliveries in the schedule as they become due. You process deliveries for a scheduling agreement in exactly the same way as you process a normal delivery. After you have carried out the delivery, the system updates the Delivered quantity field in the scheduling agreement item with the delivery quantity. The following graphic shows the document flow for scheduling agreements.
Integration
You would use this component if you had outline agreements with the customer that contained future delivery quantities of materials that would be sent at certain times within a fixed time period.
If you work with scheduling agreements for the component supplier industry you also need to choose the "Electronic Data Interchange" (EDI) component. -
Difference between sales order schedule line and item level data
Hi All,
Could you please let me know what is the difference between sales order schedule line and item level data?
Thanks,
RamyaHi Ramya,
Sales order schedule line contains del date, order qty, rounded qty, confirmed qty, delivery qty, schedule line category, purchase requisition etc., ie It contains the full details of sales order data with respect to the scheduled line of delivery. The total quantity of a sales order item can be subdivided into schedule lines that contain the various subsets with the corresponding delivering dates.
Sales order Item level data contains details of the item in the sales order like material code, net price, net value, UoM, PO details, reason for rejection if any, material group,billing date, plant etc., ie this
contains the full details of item irrespective of scheduled line.
Regards,
R. Senthil Mareeswaran. -
What is the exact difference between Purchse order and purchase requisition
Hi all,
What is the exact difference between Purchse order and purchase requisition.
ThxHi,
<b>Purchase Requisition</b>-> Staff in an orgn places Pur requisition for want of some goods/products - ME51
Related Table EBAN
Request for Quotation(RFQ)-> The Purchase dept in the orgn calls/requests for the quotation for the products against which PR was raised. - ME41
Vendor Evaluation->After receving the RFQ's, after comparison a Vendor is finalised based on the terms and conditions.
<b>Purchase Order(PO)</b>-> Pur order was issued to that vendor asking him to supply the goods/products -ME21N
Tables:EKKO,EKPO
Goods Receipt Note(GRN)->Vendor supplies the material/Products to the orgn-
MB01
Goods Issue (GI) -> People receives their respective itesm for which they have placed the Requisitions
Vendor, Material ,Qty are mandatory for PO.
Regards,
Padmam. -
Cost difference between PM report MCI8 and IW38 orders cost
Hi Experts!
I have an issue of cost difference between Plant Maintenance total actual cost of orders and Cost analysis report.
Short Text
Cost difference between PM report MCI8 and IW38 orders cost
Long Text
Applied SAP notes 180047 and 112841 for the following error:
Cost is not displaying in MCI8 for every 3 months intervals.
Now this problem has been resolved but got an another error like cost
difference between MCI8 report and IW38 order costs.
Note applied method:-
1). Configured FYV as Z1 with Period update for info structures S61 to
S65, S70, S114 to S116.
2). Regenerate order cost in Tcode OLI5.
3). PMIS: Statistical setup of info structures T.Code u2013 OLPM
For Info Structures which is changed in the configuration SO61-SO65,
SO70, S114-S116.
4). Copy info structures Version &( to Active version 000 T.Code u2013 OLIX,
Select Copy version
For all info Structure SO61-SO65, SO70, S114-S116.
*Steps for Reconstruction*
New another error like cost difference between MCI8 report and IW38
order costs.
Step 1. Transaction- MCI8, Order type - CORR, Period -01.2009 to
12.2009 and execute
Step 2. Drilldown the corrective maintenance order costs into period
wise.
Step 3. Transaction- IW38, Order type Corr, Period -01.2009 to 12.2009,
Currency - EUR and execute
Cost differences: E.g. Example A)
MCI8 IW38
Total costs 8.041,69 5.544,99
of WOs 18 18
So far my view is that, regardless of the selection criteria or the
output layout, predominantly the costs are different.
I would expect that they are equal. And what the right result are,..u2026Iu2019m
not sure.
Regards,
SanthamoorthyHello,
Sometimes this difference comes because of the selection period which we are choosing.
Try to run IW38 once with the help of Basic start and basic finish dates of the order.
And after that with the help of the period with the same dates range.
You will get the difference also.
the reason is that whenever any Posting is done in the previous month PM order the system changes the basic start date and when you select the current period and execute IW38 it shows the whole cost incurred on the order including all previous cost.
But in MCI8 it does not happen because MCI8 is run through LIS structures. And in this report only the current month cost will be shown by the system.
I hope you got the idea about differences.
Regards
Naveen -
In process Inspection Lot Qty and Actual Lot quantity difference.
Hi Experts,
In case of In process Inspection
Scenario : 1. Production Order created, released but before saving the qty is changed.
2. Production Order created released and saved. Then qty is changed in Change Prod order txn.
These scenarios are causing a discrepancy in Inspection Lot Qty and Actual Lot quantity. Is there any method to avoid this ?
This can be made correct in Inspection lot by resetting the sample calculation. But once confirmation has started for Prodn Order (not necessarily QC operation) or RR has been done resetting is not possible.
Is this the std behavior ? Disallowing the resetting once RR done seems OK, but even if any of the operation in Prodn Order is confirmed it still give status error while resetting. Canceling all the confirmation all the way back also does not solve the problem.
Any suggestions ?
Regards
JoeHi
Although your suggestion is valid, it is not practical from user point of view.
Moving this thread to QM forum.
Rgds -
DIFFERENCE BETWEEN REAL ORDER AND STATISTICAL ORDER
Dear gurus,
What is the main Difference between Real Orders and Statistical order?
Thanks in advances.
Babu.Hello,
Note: Please search the forum before posting a new thread.
The following link may be useful.
Re: Statistical & Real Posting
Regards,
Ravi -
Difference between partner order and partner oject?
hi all,
Can any one please explain the difference between partner order and partner object?
What is the purpose of partner object from controlling perspective?
Thanks in advance,
Regards,
S.Sumana.Hi Kumar,
coming to customization in between SO(Rush order) and OR(Standard order).
Go to VOV8 T.Code.
The Rush order has the details as "Under Shipping tab",
There will be "X" mark in the immediate delivery .
the Rush order will be having the order related billing.
But the Standard order can be either Order related or Delivery related.
In Standard order after creating the order we are going to create the order we are going to create the delivery by using "VL01n" T.Code.After that we are going to create the billing by using "VF01" T.Code.
Regards,
Mohan.
I think you understood if you need any other info. pls ask. -
Difference between process order and Production order
Hi Experts,
Can any buddy tell me the difference between process order and production order. Why process order is used for process industries. Why do we use recipe for it and routing for production order ?
Regards,
AmitHi Amit
There is a difference between production order and process order.
Supposing a 10,000 lit tank is being manufactured in discrete manufacturing. You have to follow the necessary routing steps and can make by physically seeing its development stage by stage. For this type production you can have a production order.
In case of process of order if some chemical in a reactor is loaded with intial temp of 30 C and need to be heated to 80 C then there is phase change. Hence we use Heating as an operation and the change of temp is phase. For such type of process we process order.
Hope this is useful. Pl reward.
Nanduri -
Difference between settlement order and standing order
Can someone state the difference between standing order and settlement order with examples in the organization tab of equioment.
Hi,
Standing Order
Standing orders are used to carry out on-going maintenance jobs and settle them at month end rather than creating a fresh PM order every time. Using order hierarchies, you could attach sub-orders to the standing order and settle them to the standing order to provide you with more precise recording of maint costs at sub-order level as well as a budget monitoring at the standing order level.
Please go through the following link.
standing order
Settlement Order
Equipment master
http://www.sapfans.com/forums/viewtopic.php?f=7&t=324724
Regards,
Maheswaran. -
Difference between incomplete order and backorder processing
What is the difference between incomplete order and backorder processing.
Hi,
Incomplete order is an order in which all the fileds(To which the Incompletion procedure is assigned) are not filled before saving the sales order.Using backorder processing, you can list sales documents relevant for requirements for particular materials and confirm them manually. You can assign available-to-promise (ATP) stock to outstanding order quantities. In addition, you can withdraw already confirmed quantities and reassign them to different items. This means If the stock of a material has been confirmed to a particular order or delivery, and after that you have recieved an order which ahs to be delivered immediately , then you can change the stock allottment of the previous order to this new order using back order processing. The transaction code for this is "V_RA". Transaction code to see which incompletion procedure is assigned to your sales order type is "VUA2" And to see the Incompletion procedure itself is "OVA2". Kindly please let me know If you need any more information on this.
Regards,
Ram Pedarla -
Difference between sales orders and incoming orders? ????
Hi all,
Does anyone know what difference between incoming order and sales order? Thank you.
KoalaI think they are the same.
Maybe you are looking for
-
Problem in setting dynamic expiration duration from Human Task
Hi, I have a BPEL process, in which the Human task expiration has to be set dynamically.. In the , I have set the expiration duration with this :- <copy> <from expression="xp20:format-dateTime(xp20:current-dateTime(),'PT1M')"/> <to variable="initiate
-
Bb chat and email do not connect to hotspots- wifi
at the hotel I am in the US there is free wifi--my provider is from another country - Using the hotspot of the hotel my bb connects only to internet and I am not receiving emails and I am not able to use the bb chat.. what can I do? this has never h
-
SR12 camera suddenly not recognised
Hi there. I have been capturing footage into FCP from my Sony SR12 without any problems....until today. It seems like FCP doesn't recognise that the camera is plugged in and connected. The camera is showing up on the mac and i can see that the files
-
I was informed that there was a bug in CC that led to apps being shown as uptodate, but actually can't be found, and that it was to be fixed soon. Does anyone know when?
-
Wiki-Server, authentication fails with iPad
Hello everybody, I have made a clean installation of OS X Server. I see a strange behavior with Wiki. When I try to authenticate with the iPad it says: "Failed to log in sucessfully" ?? I can, however access the Wikis that are "publicly" available wi