Difference between hp7612 and hp7610 printer?
Hi,
I am planning to purchase a A3 office jet printer.
Can anyone tell me what is the difference between hp7612 and hp7610 printer?
Help, much appreciated.
Hello Mahesh,
Do you got the solution for this ..
becoz i am also facing the similar problem ...
please reply
regards
-ssk_p
Similar Messages
-
Does anyone know what is the difference between standard and value print cartridges?
I was wandering does anyone know what the difference is between the 2 I am not sure which one to get.
I do not know what printer and cartridges you are looking at, but there are typically "value" or XL cartridges that have approximately three times the ink at about twice the cost.
You can see the page yield for various printers here.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V -
Differences between PDF and TIF
Printing a file to TIF or pdf as a bitmap image format gives me WYSIWYG
However, when I print the same file in pdf format, part of the data on the right side of the page is missing although the print preview looks good.
As far as I know, in the first case, the printer is dealing with raster data whereas in the second case, the printer is dealing with vector data.
I would like to know more about the differences between raster and vector printing and I would appreciate if anyone has any ideas on how to fix this.
Thanks in advance!This has nothing to do with the pdf specification, but a function of the
software running, the OS, and the printer driver. If part of the data is
missing the problem probably lies with the application software or the
printer driver. If you are using Acrobat to create the pdf, please
repost in that forum, that is where you will get the most help.
Mike -
Difference between execution mode of Print preview and Print for Output
Hello,
Can anybody tell the difference between execution mode of print preview and print for an output (For eg. PO output or Invoice)?. I am trying to download some documents linked to Purchase order to desktop. The code is written in the same driver program for printing PO and it is executed after smartform function module is called. It works fine in print preview mode and it fails in print mode. The reason why download fails in print mode is that GUI not available (just found from debugging).
Any ideas?
Thanks
AnilHI
try using any other printer and find out if you are getting the correct output. The printer needs to support Multiple Unicode encoding schemes like UTF 8, UTF 16BE, and UTF 16LE, plus special characters and logos, bi-directional text layout, and custom characters.. -
What's the difference between HP Wireless G Print Server and HP Wireless Printing Upgrade Kit?
Hello!!
What’s the difference between HP Wireless G Print Server and HP Wireless Printing Upgrade Kit?
I found two things as follows.
1. MAC support
2. USB dongle
Is there anything else?Now I’m clear!!
But there are descriptions for each on your home page over view tab. Due to this forum restriction; I cannot put the URL here.
They say for each as follows.
HP Wireless Printing Upgrade Kit --- Retain full all-in-one wireless functionality: print, fax from your PC, scan, and access photo memory cards access and PC status
HP Wireless G Print Server --- Get the same functionality with your all-in-one: printing, scanning, photo memory card access, PC faxing, and printer statusSo I got confusion, that’s why I did not get the difference for them.
And I found wrong description on your HP support document page. I recommend that you correct it, because it put consumer into confusion and break to buy this product.
The title is “HP Wireless Printing Upgrade Kit - Setting up the HP Printer with the HP Wireless Printing Upgrade Kit in Windows .”
The wrong description is “NOTE: You must turn on the computer with the computer adapter in order to print to the wireless product” at last line of “Step two: Configure other computers to use the printer. “
You can erase this line!! -
My printer does not show up in the add a printer option on my iMac when plugged into the extreme. I have a HP officejet 5610 All-in-One. I want to be able to print wirelessly using my Airport Extreme. Thank you
Is there a difference between AirPrint and printing via usb printer plugged into an AirPort Exreme?
Big difference.
AirPrint for one will not work via USB, so you will not be able to print from an iOS device like an iPhone or iPad using this type of connection unless you look at additional software....that may or may not allow this option.
Assuming that you get the All-in-One setup using the USB port on the AirPort.......only printing is supported.
You will not be able to use any other advanced features like maintenance, scan, copy, fax, etc when the device is connected to the USB port on an AirPort.
If you plan to use the HP for other things, I would strongly recommend that you connect it to your computer.
My printer does not show up in the add a printer option on my iMac when plugged into the extreme.
This usually indicates that your printer model is not supported. Check with HP Support to see if they have any updated Macintosh drivers for the 5610 that you could download and install that might allow this.
HP Officejet 5610 All-in-One Printer Drivers - Hewlett Packard -
Please what the difference between MFP1132 AND MFP1136 LASERJET PRINTER
please what the difference between MFP1132 AND MFP1136 LASERJET PRINTER
Nothing definite, but http://mindmachine.co.uk/products/HP_Texts/HP_LJ_Pro_M1130_01.html suggests that:
The MFP1132 (part number CE847A) is for American and European markets, and uses the CE285A toner cartidge.
The MFP1136 (part number CE849A) is for Asian markets, and uses the CE388A toner cartidge. -
Difference Between HashMap and HashTable
Difference Between HashMap and HashTable
Please explain with an exampleI have a situation in Java Collection and i am not
able to figure a good solution. I am scared about the
performance and memory that wil be used
I have 5 List objects with thousands and thousands of
records in it. The List is populated by a database
query using jdbcTemplate which return like 200,000
records
Each record is identified by POLICY_ID. They may be
List with multiple records for a POLICY_ID
I want to extract each POLICY_ID from all the 5 List
and make a single List object for each POLICY_ID and
for each List and pass it to a print job which will
print the data for a POLICY_ID
Example
Let say we have POLICY_ID = 15432
List1 has one record for 15432
List2 has one record for 15432
List3 has one record for 15432
List4 has three record for 15432
List5 has three record for 15432
From the 200,000 records in List1 i want to generate
a seperate list with 1 record for policy id 15432 and
let name is Listperpolicy
after this logic we have
Listperpolicy1
Listperpolicy2
Listperpolicy3
Listperpolicy4
Listperpolicy5
call print job ( Listperpolicy1, Listperpolicy2,
Listperpolicy3, Listperpolicy4, Listperpolicy5)
Please let me know
Thanks a Lotttttttttdon't worry about performance until you've got a working application. second-guessing what the performance bottlenecks will be is futile -
Difference between void and null?
wht is da difference between void and null w.r.t java?
corlettk wrote:
Why do you care, unless you're implementing a java compiler or JVM?Wow, you sure do suck at helping out in a forum. Why even make this post? You're not helping the OP any, and you made yourself look like a tool.
To the op:
Null is java's version of a null value. Java's version is more strict then many other languages, and will not work in a boolean expression or anywhere code expects a real and not null value. It's simply null.
Void is java's way of declaring no return type on a method. Methods that are void take no 'return' statement and if one is provided will cause a fatal error. The exception to this is using 'return' without a value, which returns control to the caller of the method.
Observe:
//this method returns an int
public int return_int(){
int value = 5;
return value;
//this method does not return an int
public void return_nothing(){
int another_value = 123;
System.out.println("Here's the value: " + return_int());
//this method does not return anything
public void nothing_returned(){
return_nothing();
return;
System.out.println("This line never gets printed; the method returned control already!");
} -
Whats the difference between list and lov ?
Whats the difference between list and lov ?
i can do the same things with a list what an lov can do .
infact a list is more better. cause the list doesnt hold/show a range of values, and only has the items value iteself.
while the lov can get all the values of items depending on the query.
like
select ename, job, sal from emp
will show all the three items values in lov?Also, if you're looking in the US store, the prices are:
- Airport Express (small, no ac) $99 - Has audio out for speaker connection using Airplay. Can share a USB printer only.
- Airport Extreme (larger, ac) $199 - No audio out, can share a USB printer or hard drive.
- Time Capsules (2TB, 3TB at $299, $399) - have ac wireless and a backup hard drive for Time Machine which the other Airports do not have.
Matt -
Difference between idoc and rfc
what is the difference between idoc and rfc? when and where it is used? when there is idoc, why rfc vice versa?
IDoc (for intermediate document) is a standard data structure for electronic data interchange (EDI) between application programs written for the popular SAP business system or between an SAP application and an external program. IDocs serve as the vehicle for data transfer in SAP's Application Link Enabling (ALE) system.
IDocs are used for asynchronous transactions: Each IDoc generated exists as a self-contained text file that can then be transmitted to the requesting workstation without connecting to the central database.
Another SAP mechanism, the Business Application Programming Interface (BAPI) is used for synchronous transactions.
A large enterprise's networked computing environment is likely to connect many geographically distributed computers to the main database. These computers are likely to use different hardware and/or operating system platforms. An IDoc encapsulates data so that it can be exchanged between different systems without conversion from one format to another.
IDoc types define different categories of data, such as purchase orders or invoices, which may then be broken down into more specific categories called message types. Greater specificity means that an IDoc type is capable of storing only the data required for a particular transaction, which increases efficiency and decreases resource demands.
An IDoc can be generated at any point in a transaction process. For example, during a shipping transaction process, an IDoc may be generated that includes the data fields required to print a shipping manifest. After a user performs an SAP transaction, one or more IDocs are generated in the sending database and passed to the ALE communication layer. The communication
layer performs a Remote Function Call (RFC), using the port definition and RFC destination specified by the customer model.
The IDoc is transmitted to the receiver, which may be an R/3, R/2, or some external system
RFC
Remote Function Calls (RFC) and data exchange through IDoc message documents. RFC makes direct and synchronous calls of a program in the remote system. If the caller is an external program it will call an RFC-enabled function in R/3 and if the calling program is the R/3 system it will call an RFC-function in another R/3-system or it will call a non-R/3 program through a gateway-proxy (usually rfcexec.exe). BAPIs are a subset of the RFC-enabled function modules, especially designed as Application Programming Interface (API) to the SAP business object, or in other words: are function modules officially released by SAP to be called from external programs.
note:reward points if solution found helpfull.....
regards
chandrakanth.k -
Differences between mcp and mcp t sound
this is all sound sound info direct from a man at nvidia who knows
PLEASE NOTE ONLY MCP2-T BOARD MSI DO AT THE MOMMENT IS THE K7N2G-ILSR
The MCP has no hardware support for audio of any kind, period. Windows and the CPU do all the audio work on that part and there is absolutely no DSP, NVIDIA or otherwise, in that chip to help out. Try to do EAX, any kind of reverb or chorus, or a music preset on those boards and you'll see the CPU usage climb. Ditto if you add more voices to the mix: CPU usage goes up.
The MCP-T has a full hardware audio DSP, hardware acceleration for 2D and 3D streams, and Dolby Digital encode support. EQs, HRTFs, and all environmental settings are exposed and modifiable by the user. None of this is available on the soft solutions due to the heavy hit on the CPU if they were enabled.
Short of that, you can try to use the ASIO or OpenAL drivers. You'll find that neither will work on the MCP because there is no supporting hardware for them. In short, there is no way to coax an MCP to be an APU capable part, the support simply isn't in the chip
Here's the chip differences:
MCP has the following:
- ATA-133 x 2 ports
- USB 1.0/1.1/2.0 x 6 ports
- NVIDIA MAC 10/100 x 1 port
- Legacy I/O bus (PS2, Printer, Serial)
- AC 97 host based audio (no DSP)
MCP-T includes the above and adds the following:
- 3Com MAC 10/100 x 1 port
- 1394A Firewire MAC x 3 ports
- NVIDIA APU with Dolby Digtal Encoderthats not to say mcp is bad as this proves
The MCP2 is definately hardware sound. As far as the APU goes the only difference between MCP2 and MCP2-T is the T version has Soundstorm(Dolby Digital). Basically Mcp2-T =5.1 digital output capabilities Mcp2 no digital output, analogue output only. The other differences are the T version Has Dual Lan support and a firewire controller which the plain MCP2 does not. Here are my cpu utilization test results from Audio winbench proving that The MCP2 APU is a hardware APU.
http://www.nforcershq.com/forum/viewtopic.php?p=28870#28870
to see the test he ran ,will not copy /paste
MSI K7N2-L Mainboard
Athlon XP 2000+ Retail cooler
MSI Geforce3 TI 200
1Gig (2x512) Kingston pc2700 Ram
Maxtor DiamondMax Plus 9 8meg cache 80 gig
WD 600BB 60 gig
Onboard Nforce 2 APU (no soundstorm
just to explain differences -
Differences between MD01 and MD02.
Dear SAP Experts,
Please tell me the various differences between MD01 and MD02.
In which specific cases, MD01 should be used??
Thanks and regards,
Kaushik Basu.Hi,
1. Md01 is the MRP Run for plant by giving planning scope.
2. Md02 is the mrp run for single Material from plant .
Also refer following T code for your information
Menu Nodes
Transaction
Activity
Master Data
MD25
Create planning calendar
MD26
Change planning calendar
MD27
Display planning calendar
MDSA
Display BOM explosion number
MDSP
Edit BOM explosion number
MEQ1
Maintain quota file
OPPP
Explode BOM by date
MDUS
Display project assignment
MDUP
Process project assignment
MDL1
Create production lot
MDL2
Change production lot
MDL3
Display production lot
Planning
MD20
Create planning file entry
MD21
Display planning file entry
MDAB
Set up planning file entry in background
MDRE
Check planning file entry
MD01
Total planning online
MDBT
Total planning in background
MD03
Single-item, single-level planning
MD02
Single-item, multi-level planning
MD43
Interactive single-item planning
MD50
Multi-level, make-to-order planning
MD51
Multi-level project planning
MF52
Display planning table
MF50
Change planning table
MF57
Planning table by MRP lists
MF51
Planning table by production list
Evaluations
MD04
Stock/requirements list
MD07
Collective access of stock/requirements lists
MD05
MRP list
MD06
Collective access of MRP lists
MDLD
Print MRP list
MD45
Planning result
MD46
Collective access of planning result
MD44
Planning situation for a material
MD47
Planning situation for a product group
MD48
Cross-plant planning situation
MD4C
Order report
MD09
Pegged requirements
CO46
Order progress
Planned Order
MD11
Create planned order
MD12
Change planned order
MD13
Individual access of planned order
MD16
Collective access of planned orders
MD14
Individual conversion of planned order into purchase requisition
MD15
Collective conversion of planned orders into purchase requisitions
MDUM
Convert planned order into purchase requisition in background
CO40
Convert individual planned order into production order
CO41
Collective conversion of planned orders into production orders
CO48
Partial conversion of planned order into production order
COR7
Individual conversion of planned order into process order
COR7_PC
Collective conversion of planned orders into process orders
COR8
Partial conversion of planned order into process order
MDVP
Collective availability check
MDAC
Execute action for planned order
Hope it clear to u.
Edited by: Atul Zod on Nov 21, 2008 6:59 AM -
Difference between open_form and start_form
difference between open_form and start_form?
hi,
Any driver program must contain Open_Form, Close_Form and Write_Form. Other function modules are optional.
OPEN_FORM: This function module opens layout set printing. One must call this function module before he uses any of other layout set function modules like Write_Form, Start_Form, Control_Form etc., You need specify a layout set name in the export parameters of this function module. If nothing is passed to Open_Form then one should use Start_Form function module to open layout set before starting the output. The layout set opened by Open_Form should be closed by Close_Form function module, other wise output doesnt appear. We can use any number of Open_Form, Close_Form functions in one single program. But Close_Form must be there for every Open_Form in the program.
Some of the important export parameters we have to pass to Open_Form function module.
Form: Enter the Layout set name here, which then controls the output formatting. If nothing is specified then we must use Start_Form for opening layout set.
Language: Layout sets are Language dependent. Enter the desired language here. If the entered layout set is not in that language, then the function tries to open the Form entered in its original language. The default value is SY-LANGU.
Device: SAP Script can format a text on different device types. The device can be PRINTER or TELEX, TELEFAX, ABAP and SCREEN.
Dialog: Use parameter DIALOG to determine whether to display a dialog box before printing, in which the user can set several spool parameters for print formatting. Possible values: SPACE displays no print parameter screen. 'X' display print parameter screen. Default value: 'X'
Options: Use parameter OPTIONS to set several options for print formatting. The parameter has the structure ITCPO. The user can change some of the defined settings on the print control screen. The default value for Options is . We will discuss about ITCPO structure in detail later.
Other Export, Import and Exceptions are self-explanatory.
Start_Form: In-between the function modules OPEN_FORM and CLOSE_FORM, we can use different layout sets. This allows us to combine several different layout sets into one print output. However, we can combine only those layout sets that have the same page format. To switch layout sets, use the function module START_FORM. If another layout set is still open, we must close it first using END_FORM. If we specify no layout set name when calling START_FORM, the system restarts the last open layout set. If after OPEN_FORM no layout set was activated yet, the system leaves the function module with the exception UNUSED. Some of the important export parameters for this function module are
Form: The parameter contains the name of the layout set you want to use for printing. If you specify no layout set here, the system restarts the last active layout set.
Language: Layout sets are language-dependent. Enter the desired language here. If the layout set does not exist in this language, the system tries to call the layout set in its original language. If the parameter LANGUAGE is empty, the system uses the language of the last active layout set.
Startpage: Usually, SAP script starts with the page specified as start page in the layout set definition. If we want to start output with another layout set page, enter the name of the desired layout set page here. If the desired page is not defined, the system uses the start page defined in the layout set.
Program: To replace program symbols, SAP script must know which active program contains the work areas for the values to be passed. If we omit the parameter, the system searches for the field values in the program that was specified in the parameter OPTIONS (field TDPROGRAM) of OPEN_FORM. If we enter a program name, the system replaces the program symbols with the values from this program up to the next END_FORM.
Exceptions and other Export, Import parameters are self-explanatory.
Regards
Kiran Sure -
Difference between scripts and idocs
In real time why we are using scripts and idocs?what is the difference between scripts and idocs?pls tell me where we r using scripts and idocs?
Hi,
IDocs are simple ASCII data streams. When they are stored to a disk file, the IDocs are simple flat files with lines of text, where the lines are structured into data fields. The typical structured file has records, each record starting with a leading string that identifies the record type. Their specification is stored in the data dictionary.
Electronic Interchange Document
IDocs is the acronym for Interchange Document. This indicates a set of (electronic) information which builds a logical entity. An IDoc is e.g. all the data of a single customer in your customer master data file, or the IDoc is all the data of a single invoice.
Data Is transmitted in ASCII format, i.e. human readable form
IDoc data is usually exchanged between systems and partners that are completely independent. Therefore, the data should be transmitted in a format that can easily be corrected by the computer operators. It is therefore mandatory to post the data in a human readable form.
Nowadays, this means that data is coded in ASCII format, including numbers which are sent as a string of figures 0 to 9. Such data can easily be read with any text editor on any computer, be it a PC, Macintosh, UNIX System, S/390 or any internet browser.
IDocs exchange messages
The information which is exchanged by IDocs is called a message and the IDoc is the physical representation of such a message. The name messages for the information sent via IDocs is used in the same ways as other EDI standards. .
Scrpits...
If the user wants to print documents such as invoices, purchase order, all such documents are printed with the use of forms. SAP allows the user to define these forms by using layout sets. SAP script is the tool used to create the layout set.
In order to print the document, the SAP system runs a program that collects the data for the document and feeds it into the layout set. This is called as Print Program.
SAP Provides a standard layout set for every printable document and usually there is no need to create layout sets as such. User just modifies the existing layout sets as per requirement of client.
Regards,
Sam
Maybe you are looking for
-
IPhone 4 with ios 5 no longer recognised in windows explorer
Just updated my iPhone 4 to ios5 last night. Since then I can't see my phone under windows explorer. It shows up fine in iTunes. So now I can't manage my pictures and videos. I've tried it on 2 different windows machines, both XP. Help please!
-
Hi, I want to get the details of the USER who did the Payment Run using F110.Neither REUGH nor REGUP is storing those details.There is a table called REGUA which is having the details but not for every run. Do anyone here know the table which stoes t
-
Revision: 13535 Revision: 13535 Author: [email protected] Date: 2010-01-15 14:45:38 -0800 (Fri, 15 Jan 2010) Log Message: Part 1 of fixing line endings in AS and MXML files so that line numbers are correct while debugging. We've got a widesprea
-
Difference between Integration Process & Business process in SAP XI
Hi Friends, Good Evening. I am getting a lot of confusion between Integration process & Business Process. Could you please explain me with good example? Thanking you all in Advance. Thanks & Regards, Nagarjuna.
-
Formatting textfile for Combobox.dataProvider
Can't seem to find any formatting rules for array construction through an external file. This is what i am trying to do: I've loaded vars into the _root this works fine. Splitted its value for constructing an array. This seems to work fine aswell. If