Difference between Initialization and Load-of-Program

Hi All!
Could anybody tell me what exactly is the difference between Load-of-program and initialization using a sample program?
Thanks in advance...
Jag.

Hi Jag
It seems not so much difference. But INITIALIZATION block is peculiar to executables.
<b>INITIALIZATION</b>: Only occurs in executable programs. The ABAP runtime environment triggers the INITIALIZATION event before the selection screen is processed, at which point the corresponding event block is processed.
<b>LOAD-OF-PROGRAM</b>: When an ABAP program is loaded in an internal session, the runtime environment triggers the LOAD-OF-PROGRAM event, and the corresponding event block is executed.
Regards
*--Serdar <a href="https://www.sdn.sap.com:443http://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.sdn.businesscard.sdnbusinesscard?u=qbk%2bsag%2bjiw%3d">[ BC ]</a>

Similar Messages

Initialization and load of program

Hi ,
Can anybody tell me the difference between initialization and load of program events because both of these events functions in a similar way .
Neetesh

Hi neetesh,
1. In normal programming for se38 reports,
   it does not make any difference between initialization and load-of-program.
2. HOWEVER,
3. Suppose u want to call some FORM in another program
   using PERFORM MYFORM(ZREPORT2)
   and u want to fill some global varaiables of ZREPORT2,
   then WHAT ?
4. In that case,
    when PERFORM is encountered in report1,
    then the ZREPORT2 is LOADED
   and the event LOAD-OF-PROGRAM is fired,
   where we can fill values in global variables.
(in such case, initializatino won't be fired)
regards,
amit m.

Difference between Clustering and Load balancing

          What is the difference between Clustering and Load balancing?
          For example, We use Cisco Arrowpoint to do load balancing and it works fine for 3
          Sun solaris boxes/WebLogic 6.1 SP1.
          So what is the value addition to buy clustering license?
          Thanks
          Selvaraj


Hi.
          Among other things, clustering allows you to share app data (such as http session
          data) across cluster members, allowing you to failover should one cluster member
          crash.
          If your app is stateless then this doesn't mean much - load balancing alone would
          probably be ok for you.
          Regards,
          Michael
          Selvaraji wrote:
          > What is the difference between Clustering and Load balancing?
          >
          > For example, We use Cisco Arrowpoint to do load balancing and it works fine for 3
          > Sun solaris boxes/WebLogic 6.1 SP1.
          >
          > So what is the value addition to buy clustering license?
          >
          > Thanks
          >
          > Selvaraj
          Michael Young
          Developer Relations Engineer
          BEA Support

Colour- strange difference between Lightroom and all other programs/windows

Hello everyone,
I have a strange problem with the colours in Lr. In the program everything looks good, the colours are the ones that i want to achieve, but when i export the pictures as jpeg (srgb), the tumbnails of these pictures seem to be fine (same colours as in Lr). However, when i open the jpeg (eg in picture viewer or in photoshop) all of the colours are different than the ones in Lr or the tumbnails. On a different computer, the jpegs have the same problem.
Any idea how to resolve this problem? Can I change the colour management of Lr itself (not the external editors)?
Thanx@

OK.
From LR in Develop module I press cmd e to create a TIFF to edit in PS CS3. Edit with LR adjustments is selected. After a while the TIFF appears beside the CR2 Canon 5d raw file.
Still in LR flick between the two and the difference is readily apparent. I notice that all the tiff presets are at 0 i.e. in the develop module as I would expect them to be. But the TIFF image looks sharper and in areas of detail less saturated. I think the decrease in saturation is more a side effect of sharpening.
The new TIFF opened in PS looks exactly the same as the TIFF in LR. But both are different from the raw file they were created from as seen from the LR develop module.
In LR I have applied some masking and a moderate amount of sharpening to the CR2 raw file. I do note that applying sharpening in LR does not seem to change anything except the 1:1 and higher mags unless the sharpening is extreme. In other words I think the imnage as displayed at lower magnifications e.g. Fit to screen is not a realistic representation of the overall effect of sharpening, even when rendered on a large monitor (30") wide gamut monitor. If I am right this is a significant problem. I note that BibblePro perviews reflect the effect of sharpening on the overall image more accurately. (So it is possible.)
(FWIW: My preview settings in LR are quality high, 2048 pixels.)
EDIT: Yes I am correct, the images look the same at 1:1 but not at lower magnification. So guess the LR preview rendering machine does not quite match the preview rendered from the newly created TIFF.
Still knowing this does not help, it just means what I see on the screen in LR at lower magnification than 1:1 is not accurate.

Difference between Reconstruction and regular load from PSA

Gurus,
      What is the Difference between Reconstruction and load from PSA into datatarget.I understand that during Reconstruction we are not loaing data from R3.
      I have a cube and there are 3 requests in that.I deleted all the requests went to PSA and selected one of the requests and selected reconstruct from this.I went to cube and I can see this selected request in PSA in the reconstruction requests of cube.I submitted the reconstruction/Insert button there.
      Is this the procedure to do reconstruction.If yes then how is it different from regular load from PSA.
Thanks

If look function wise both are doing samething. But there is difference in data flow, PSA is used as staging area. If we choose at first place to load only to PSA and analyze our load do manual editing if needed and then load to data target in this case ofcourse reconstruct option is not available or we could parrallely or sequencialy load to data target beside laoding into PSA. So now having already have loaded into data target if some how we needed to delete and reload we can reconstruct the request or run normal load from PSA.

Difference between poh and pov in module pool programming

hi all,
                   pls tell me difference between poh and pov and how i check validation in screen

Hi,
POV gives you F4 help.
like:
You can call dialog modules in the POV event using the event keyword PROCESS ON VALUE-REQUEST.
PROCESS ON VALUE-REQUEST.
FIELD f MODULE mod.
After the PROCESS ON VALUE-REQUEST statement, you can only use the MODULE statement together with the FIELD statement. When the user chooses F4 for a field f, the system calls the module mod belonging to the FIELD statement. If there is more than one FIELD statement for the same field f, only the first is executed. The module mod is defined in the ABAP program like a normal PAI module. However, the contents of the screen field f are not available, since it is not transported by the FIELD statement during the PROCESS ON HELP-REQUEST event. You can now program your own value lists in the module. However, this procedure is only recommended if it really is not possible to use a search help. Defining search helps is much easier than PROCESS ON VALUE-REQUEST, since the system takes over some of the standard operations, such as getting field contents from the screen. It also ensures that the F4 help has a uniform look and feel throughout the system. Furthermore, it means that you do not have to reassign input help to fields on each screen.
Despite the introduction of search helps (and search help exits), there are still cases in which you need to use parts of the standard F4 functions directly. In this case, there are some standard function modules that you can use in the POV event. They support search helps, as well as all other kinds of input help, and are responsible for data transport between the screen and the input help. These alll have the prefix F4IF_. The most important are:
·        F4IF_FIELD_VALUE_REQUEST
Calls the input help of the ABAP Dictionary dynamically. You can pass the component names of a structure or database table of the ABAP Dictionary to the function module in the import parameters TABNAME and FIELDNAME. The function module starts the ABAP Dictionary input help for this component. All of the relevant screen fields are read. If you specify the import parameters DYNPPROG, DYNPNR, and DYNPROFIELD, the users selection is returned to the corresponding field on the screen. If you specify the table parameter RETURN_TAB, the selection is returned into the table instead.
·        F4IF_INT_TABLE_VALUE_REQUEST
This function module displays a value list that you created in an ABAP program. The self-programmed value list is passed to the function module as the table parameter VALUE_TAB. If you specify the import parameters DYNPPROG, DYNPNR, and DYNPROFIELD, the users selection is returned to the corresponding field on the screen. If you specify the table parameter RETURN_TAB, the selection is returned into the table instead.
There are also two function modules - DYNP_VALUES_READ and DYNP_VALUES_UPDATE - that can read the values of screen fields and return values to them during the POV event. For further information, refer to the relevant function module documentation.
Input help in dialog modules
REPORT demo_dynpro_f4_help_module.
TYPES: BEGIN OF values,
         carrid TYPE spfli-carrid,
         connid TYPE spfli-connid,
       END OF values.
DATA: carrier(3) TYPE c,
      connection(4) TYPE c.
DATA: progname TYPE sy-repid,
      dynnum   TYPE sy-dynnr,
      dynpro_values TYPE TABLE OF dynpread,
      field_value LIKE LINE OF dynpro_values,
      values_tab TYPE TABLE OF values.
CALL SCREEN 100.
MODULE init OUTPUT.
progname = sy-repid.
dynnum   = sy-dynnr.
CLEAR: field_value, dynpro_values.
field_value-fieldname = 'CARRIER'.
APPEND field_value TO dynpro_values.
ENDMODULE.
MODULE cancel INPUT.
LEAVE PROGRAM.
ENDMODULE.
MODULE value_carrier INPUT.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
       EXPORTING
            tabname     = 'DEMOF4HELP'
            fieldname   = 'CARRIER1'
            dynpprog    = progname
            dynpnr      = dynnum
            dynprofield = 'CARRIER'.
ENDMODULE.
MODULE value_connection INPUT.
CALL FUNCTION 'DYNP_VALUES_READ'
       EXPORTING
            dyname             = progname
            dynumb             = dynnum
            translate_to_upper = 'X'
       TABLES
            dynpfields         = dynpro_values.
READ TABLE dynpro_values INDEX 1 INTO field_value.
SELECT carrid connid
    FROM spfli
    INTO CORRESPONDING FIELDS OF TABLE values_tab
    WHERE carrid = field_value-fieldvalue.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
       EXPORTING
            retfield    = 'CONNID'
            dynpprog    = progname
            dynpnr      = dynnum
            dynprofield = 'CONNECTION'
            value_org   = 'S'
       TABLES
            value_tab   = values_tab.
ENDMODULE.
*POH gives you F1 documentation:*
like:
If data element supplement documentation is insufficient for your requirements, or you want to display help for program fields that you have not copied from the ABAP Dictionary, you can call dialog modules in the POH event:
PROCESS ON HELP-REQUEST.
FIELD is defined in the ABAP program like a normal PAI module. The processing logic of the module must ensure that adequate help is displayed for the field in question. Instead of calling an extra screen with text fields, you should use one of the following function modules to display a suitable SAPscript document:
HELP_OBJECT_SHOW_FOR_FIELD
This function module displays the data element documentation for components of any structure or database table from the ABAP Dictionary. You pass the name of the component and structure or table to the import parameters FIELD and TABLE.
HELP_OBJECT_SHOW
Use this function module to display any SAPscript document. You must pass the document class (for example, TX for general texts, DE for data element documentation) and the name of the document to the import parameters DOKCLASS and DOKNAME. For technical reasons, you must also pass an empty internal table with the line type TLINE to the tables parameter of the function module.
For further information about how to create SAPscript documents, refer to the Documentation of System Objects documentation.
Field help on screens.
REPORT DEMO_DYNPRO_F1_HELP.
DATA: TEXT(30),
       VAR(4),
       INT TYPE I,
       LINKS TYPE TABLE OF TLINE,
       FIELD3, FIELD4.
TABLES DEMOF1HELP.
TEXT = TEXT-001.
CALL SCREEN 100.
MODULE CANCEL INPUT.
LEAVE PROGRAM.
ENDMODULE.
MODULE F1_HELP_FIELD2 INPUT.
INT = INT + 1.
CASE INT.
    WHEN 1.
    VAR = '0100'.
    WHEN 2.
    VAR = '0200'.
    INT = 0.
ENDCASE.
ENDMODULE.
MODULE F1_HELP_FIELD3 INPUT.
CALL FUNCTION 'HELP_OBJECT_SHOW_FOR_FIELD'
       EXPORTING
            DOKLANGU                      = SY-LANGU
            DOKTITLE                      = TEXT-002
            CALLED_FOR_TAB                = 'DEMOF1HELP'
            CALLED_FOR_FIELD              = 'FIELD1'.
ENDMODULE.
MODULE F1_HELP_FIELD4 INPUT.
CALL FUNCTION 'HELP_OBJECT_SHOW'
       EXPORTING
            DOKCLASS                      = 'TX'
            DOKLANGU                      = SY-LANGU
            DOKNAME                       = 'DEMO_FOR_F1_HELP'
            DOKTITLE                      = TEXT-003
       TABLES
            LINKS                         = LINKS.
ENDMODULE.
Regards,
Renjith Michael

Could any one tell me what is the difference between swfloader and module loader?

Hi All,
                      Could any one tell me what is the difference between SWFLoader and Module Loader in Flex3 in detail?

Hi,
ModuleLoader is a kind of strange API that is really just intended to look like SwfLoader for modules that contain a single visual component, and hides most of the module loading infrastructure, which is all about class factories.
What I mean by "only loaded once" is that if you have several places in the code that call the ModuleManager.getModule("url").load() call, it will only ever get loaded over the wire and interpreted once, subsequent "loads" will just re-dispatch pseudo-load events to the new client. In other words, the class factory is a singleton for a given url. Unloading is a totally different story. As you note, not everything is truly unloadable, because there may be lots of references to stuff in
the module that will keep it alive and un-GC'ed.
I suggest playing with the low-level API so that you understand the backing implementation, and this should help you understand the limits of ModuleLoader.
The main difference between modules and applications is that modules have lower overhead, and they only ever get loaded once, no matter how many times you load them. If you're using the ModuleLoader API, keep in mind that you're losing about half the functionality of the module system. I will assume that you are, because otherwise it would be obvious where to expose methods. You might want to play around with the lower level ModuleManager API just to get a hang of what's going on - ModuleLoader is a pretty thin veneer over the lower API.
                Basically, what you want to do is to have your module implement an interface, say IModuleWhatever.
Also try and refer to this link which was previously discussed in this forum..
http://forums.adobe.com/message/74404
Thanks,
Bhasker

What is the programming (ABAP) difference between Unicode and non Unicode?

What is the programming(ABAP) difference between Unicode and non Unicode?
Edited by: NIV on Apr 12, 2010 1:29 PM

Hi
The difference between programming in Unicode or not Unicode is that you should consider some adjustments to make on the Program "Z" to comply with the judgments Unicode Standard.
In the past, developments in SAP using multiple systems to encode the characters of different alphabets. For example: ASCII, EBCDI, or double-byte code pages.
These coding systems mostly use 1 byte per character, which can encode up to 256 characters. However, other alphabets such as Japanese or Chinese use a larger number of characters in their alphabets. That's why the system using double-byte code page, which uses 2 bytes per character.
In order to unify the different alphabets, it was decided to implement a single coding system that uses 2 bytes per character regardless of what language is concerned. That system is called Unicode.
Unicode is also the official way to implement ISO/IEC 10646 and is supported in many operating systems and all modern browsers.
The way of verifying whether a program was adjusted or not, is through the execution of the UCCHECK transaction. Additionally, you can check by controlling syntax (making sure that this asset verification check Unicode).
The main decisions to adjust / replace are (examples):
ASSIGN H-SY-INDEX TEXT TO ASSIGN <F1> by
H-SY-INDEX TEXT (*) TO <F1>.
DATA INIT (50) VALUE '/'. by
DATA INIT (1) VALUE '/'.
DESCRIBE FIELD text LENGTH lengh2 by
DESCRIBE FIELD text LENGTH lengh2 in character mode.
T_ZSMY_DEMREG_V1 = record_tab by
record_tab TO MOVE-Corresponding t_zsmy_demreg_v1.
escape_trick = hot3. by
escape_trick-x1 = hot3.
itab_txt TYPE wt by
ITAB_TXT TYPE TABLE OF TEXTPOOL
DATA: string3 (3) TYPE X VALUE B2023 '3 'by
DATA: string3 (6) B2023 TYPE c VALUE '3 '.
OPEN DATASET file_name IN TEXT MODE by
OPEN DATASET file_name FOR INPUT IN TEXT MODE ENCODING NON-UNICODE.
or
OPEN DATASET file_name FOR INPUT IN TEXT MODE ENCODING DEFAULT.
CODE FROM PAGE TRANSLATE a_codepage record by
record TRANSLATE USING a_codepage.
CALL FUNCTION 'DOWNLOAD' by
CALL METHOD cl_gui_frontend_services => gui_download
CALL FUNCTION 'WS_DOWNLOAD' by
CALL METHOD cl_gui_frontend_services => gui_download
CALL FUNCTION 'UPLOAD' by
CALL METHOD cl_gui_frontend_services => gui_upload
CALL FUNCTION 'WS_UPLOAD' by
CALL METHOD cl_gui_frontend_services => gui_upload
PERFORM USING HEAD APPEND_XFEBRE +2. by
PERFORM USING HEAD APPEND_XFEBRE +2 (98).
Best Regars
Fabio Rodriguez

Difference between exit and leave program

Hi,
what is the difference between exit and leave program.
I want to come to sap screen which one have to use.?
Thanks,
srii.

Hi,
EXIT is used to end the Further processing after The EXIT Statement if the condition does not meet.
The output before EXIT is then Displayed.
But LEAVE PROGRAM is used to Leave the defined program just after the the Statement.
Generally if to Coming Back to Calling Program after the Processing of Called Program it is used.Or After a Certain Statement if you want to Leave the program.
Follow the link-
http://help.sap.com/saphelp_nw2004s/helpdata/en/71/9f893f17493c17e10000000a114084/content.htm
http://www.sapbrainsonline.com/ARTICLES/TECHNICAL/ABAP/CALL%20ANOTHER%20PROGRAM%20FROM%20LIST.html
http://help.sap.com/saphelp_nw70/helpdata/en/9f/dba50035c111d1829f0000e829fbfe/content.htm
Regards,
Sujit

Differences between awt and swing

Ive written the following code, however Ive implemented the gui in awt rather then swing. Ive been told it hs too be in swing. What is the difference between swing and awt what will I need to change in my program so that its done using swing rather then the awt? Heres the code:
// pp.java
// Grant Brown
// 22/02/02
import java.awt.*;
import java.awt.event.*;
import java.io.*;
import java.util.*;
import javax.swing.*;
// =========================================================
// Class: pp
// This class drives the customer manager. It contains the
// main method which gets called as soon as this application
// begins to run.
// =========================================================
class pp extends Frame implements ActionListener
// Container of customer objects
private Vector customers = new Vector (100);
// List of names component. (Must specify java.awt in
// front of List to distinguish the List class in the
// java.awt package from the List class in the java.util
// package.)
private java.awt.List names = new java.awt.List ();
// Delete and update button components.
private Button delete;
private Button update;
// Default constructor.
public pp ()
// Assign "Paper Round Manager" to title bar of frame window.
super ("Paper Round Manager");
// Add a listener that responds to window closing
// events. When this event occurs (by clicking on the
// close box in the title bar), save customers and exit.
addWindowListener (new WindowAdapter ()
public void windowClosing
(WindowEvent e)
saveCustomers ();
System.exit (0);
// Place an empty label in the north part of the frame
// window. This is done to correct an AWT positioning
// problem.
Label l = new Label ();
add ("North", l);
// Place the names component in the center part of the
// frame window.
add ("Center", names);
// Create a panel object to hold four buttons.
Panel p = new Panel ();
Button b;
// Add an Insert button to the Panel object and register
// the current pp object as a listener for button events.
p.add (b = new Button ("Insert"));
b.addActionListener (this);
// Add a Delete button to the Panel object and register
// the current pp object as a listener for button events.
p.add (delete = new Button ("Delete"));
delete.addActionListener (this);
// The Delete button should be disabled until there is at
// least one customer to delete.
delete.setEnabled (false);
// Add an Update button to the Panel object and register
// the current pp object as a listener for button events.
p.add (update = new Button ("Update"));
update.addActionListener (this);
// The Update button should be disabled until there is at
// least one customer to update.
update.setEnabled (false);
// Add a Finish button to the Panel object and register
// the current customer object as a listener for button events.
p.add (b = new Button ("Finish"));
b.addActionListener (this);
// Add the panel object to the frame window container.
add ("South", p);
// Set the background of the frame window container to
// lightGray
setBackground (Color.lightGray);
// Set the size of the frame window container to 400
// pixels horizontally by 200 pixels vertically.
setSize (400, 200);
// Allow the user to resize the frame window.
setResizable (true);
// Load all contacts.
loadCustomers ();
// Make sure that the frame window is visible.
setVisible (true);
public void actionPerformed (ActionEvent e)
if (e.getActionCommand ().equals ("Delete"))
delete ();
else
if (e.getActionCommand ().equals ("Finish"))
saveCustomers ();
System.exit (0);
else
if (e.getActionCommand ().equals ("Insert"))
insert ();
else
update ();
public Insets getInsets ()
// Return an Insets object that describes the number of
// pixels to reserve as a border around the edges of the
// frame window.
return new Insets (10, 10, 10, 10);
public static void main (String [] args)
// Create a new pp object and let it do its thing.
new pp ();
private void delete ()
// Obtain index of selected contact item from the names
// component.
int index = names.getSelectedIndex ();
// If no item was selected, index is -1. We cannot update
// a contact if no contact item in the names component was
// selected - because we would have nothing to work with.
if (index != -1)
// Remove the contact item from the names component.
names.remove (index);
// Remove the Customer object from the contacts Vector
// object.
customers.remove (index);
// If there are no more customers ...
if (customers.size () == 0)
delete.setEnabled (false);
update.setEnabled (false);
else
// Make sure that the first contact item in the names
// list is highlighted.
names.select (0);
private void insert ()
// Create an Insert data entry form to enter information
// for a new customer.
DataEntryForm def = new DataEntryForm (this, "Insert");
// If the bOk Boolean flag is set, this indicates the user
// exited the form by pressing the Ok button.
if (def.bOk)
// Create a Contact object and assign information from
// the form to its fields.
Customer temp = new Customer ();
temp.name = new String (def.name.getText ());
temp.publication = new String (def.publication.getText ());
temp.round = new String (def.round.getText ());
temp.address = new String (def.address.getText ());
temp.phone = new String (def.phone.getText ());
// Add a new customer item to the names component.
names.add (temp.name + ", " + temp.publication);
// Add the Customer object to the contacts Vector
// object.
customers.add (temp);
// Make sure that the Delete and Update buttons are
// enabled.
delete.setEnabled (true);
update.setEnabled (true);
// Destroy the dialouge box.
def.dispose ();
// Make sure that the first customer item in the names list
// is highlighted.
names.select (0);
// ===========================================================
// Load all contacts from contacts.dat into the contacts
// Vector object. Also, make sure that the last name/first
// name from each contact is combined into a String object and
// inserted into the names component - as a contact item.
// ===========================================================
private void loadCustomers ()
FileInputStream fis = null;
try
fis = new FileInputStream ("Customers.dat");
DataInputStream dis = new DataInputStream (fis);
int nCustomers = dis.readInt ();
for (int i = 0; i < nCustomers; i++)
Customer temp = new Customer ();
temp.name = dis.readUTF ();
temp.publication = dis.readUTF ();
temp.round = dis.readUTF ();
temp.address = dis.readUTF ();
temp.phone = dis.readUTF ();
names.add (temp.name + ", " + temp.publication);
customers.add (temp);
if (nCustomers > 0)
delete.setEnabled (true);
update.setEnabled (true);
catch (IOException e)
finally
if (fis != null)
try
fis.close ();
catch (IOException e) {}
// Make sure that the first contact item in the names list
// is highlighted.
names.select (0);
// ========================================================
// Save all Customer objects from the customer Vector object
// to customer.dat. The number of customerss are saved as an
// int to make it easy for loadCustomers () to do its job.
// ========================================================
private void saveCustomers ()
FileOutputStream fos = null;
try
fos = new FileOutputStream ("customers.dat");
DataOutputStream dos = new DataOutputStream (fos);
dos.writeInt (customers.size ());
for (int i = 0; i < customers.size (); i++)
Customer temp = (Customer) customers.elementAt (i);
dos.writeUTF (temp.name);
dos.writeUTF (temp.publication);
dos.writeUTF (temp.round);
dos.writeUTF (temp.address);
dos.writeUTF (temp.phone);
catch (IOException e)
MsgBox mb = new MsgBox (this, "PP Error",
e.toString ());
mb.dispose ();
finally
if (fos != null)
try
fos.close ();
catch (IOException e) {}
private void update ()
// Obtain index of selected customer item from the names
// component.
int index = names.getSelectedIndex ();
// If no item was selected, index is -1. We cannot update
// a customer if no customer item in the names component was
// selected - because we would have nothing to work with.
if (index != -1)
// Obtain a reference to the customer object (from the
// customers Vector object) that is associated with the
// index.
Customer temp = (Customer) customers.elementAt (index);
// Create and display an update entry form.
DataEntryForm def = new DataEntryForm (this, "Update",
temp.name,
temp.publication,
temp.round,
temp.address,
temp.phone);
// If the user pressed Ok...
if (def.bOk)
// Update the customer information in the customers
// Vector object.
temp.name = new String (def.name.getText ());
temp.publication = new String (def.publication.getText ());
temp.round = new String (def.round.getText ());
temp.address = new String (def.address.getText ());
temp.phone = new String (def.phone.getText ());
// Make sure the screen reflects the update.
names.replaceItem (temp.name + ", " + temp.publication,
index);
// Destroy the dialouge box.
def.dispose ();
// Make sure that the first customer item in the names
// list is highlighted.
names.select (0);

Ive doen pretty much what you said burt now my program isnt working at all. The window comes up but instead of doing something when you click the button it just throws shit loads of exceptions. Heres my abridged code
// pp.java
// Grant Brown
// 22/02/02
import java.awt.*;
import java.awt.event.*;
import java.io.*;
import java.util.*;
import javax.swing.*;
// =========================================================
// Class:PP
// This class drives the Paper Round manager. It contains the
// main method which gets called as soon as this application
// begins to run.
// =========================================================
class pp extends JFrame implements ActionListener
// Container of customer objects (one object per customer)
private Vector customers = new Vector (100);
// List of names component. (Must specify java.awt in
// front of List to distinguish the List class in the
// java.awt package from the List class in the java.util
// package.)
private java.awt.List names = new java.awt.List ();
// Delete and update button components.
private JButton delete;
private JButton update;
// Default constructor.
public pp ()
// Assign Contact Manager to title bar of frame window.
super ("Paper Round Manager");
// Add a listener that responds to window closing
// events. When this event occurs (by clicking on the
// close box in the title bar), save contacts and exit.
addWindowListener (new WindowAdapter ()
public void windowClosing
(WindowEvent e)
saveCustomers ();
System.exit (0);
// Place an empty label in the north part of the frame
// window. This is done to correct an AWT positioning
// problem. (One thing that you'll come to realize as
// you work with the AWT is that there are lots of bugs.)
JLabel l = new JLabel ();
getContentPane().add ("North", l);
// Place the names component in the center part of the
// frame window.
getContentPane().add ("Center", names);
// Create a panel object to hold four buttons.
JPanel p = new JPanel ();
JButton b;
// Add an Insert button to the Panel object and register
// the current cm object as a listener for button events.
p.add (b = new JButton ("Insert"));
b.addActionListener (this);
// Add a Delete button to the Panel object and register
// the current cm object as a listener for button events.
p.add (delete = new JButton ("Delete"));
delete.addActionListener (this);
// The Delete button should be disabled until there is at
// least one contact to delete.
delete.setEnabled (false);
// Add an Update button to the Panel object and register
// the current cm object as a listener for button events.
p.add (update = new JButton ("Update"));
update.addActionListener (this);
// The Update button should be disabled until there is at
// least one contact to update.
update.setEnabled (false);
// Add a Finish button to the Panel object and register
// the current cm object as a listener for button events.
p.add (b = new JButton ("Finish"));
b.addActionListener (this);
// Add the panel object to the frame window container.
getContentPane().add ("South", p);
// Set the background of the frame window container to
// lightGray (to give a pleasing effect).
setBackground (Color.lightGray);
// Set the size of the frame window container to 400
// pixels horizontally by 200 pixels vertically.
setBounds (50, 100, 400, 200);
// Do not allow the user to resize the frame window.
loadCustomers ();
// Load all contacts.
setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
// Make sure that the frame window is visible.
setVisible (true);
public void actionPerformed (ActionEvent e)
if (e.getActionCommand ().equals ("Delete"))
delete ();
else
if (e.getActionCommand ().equals ("Finish"))
saveCustomers ();
System.exit (0);
else
if (e.getActionCommand ().equals ("Insert"))
insert ();
else
update ();
public Insets getInsets ()
// Return an Insets object that describes the number of
// pixels to reserve as a border around the edges of the
// frame window.
return new Insets (10, 10, 10, 10);
public static void main (String [] args)
// Create a new cm object and let it do its thing.
new pp ();
private void delete ()
// Obtain index of selected customer item from the names
// component.
int index = names.getSelectedIndex ();
// If no item was selected, index is -1. We cannot update
// a contact if no contact item in the names component was
// selected - because we would have nothing to work with.
if (index != -1)
// Remove the customer item from the names component.
names.remove (index);
// Remove the Customer object from the contacts Vector
// object.
customers.remove (index);
// If there are no more customers ...
if (customers.size () == 0)
delete.setEnabled (false);
update.setEnabled (false);
else
// Make sure that the first contact item in the names
// list is highlighted.
names.select (0);
private void insert ()
// Create an Insert data entry form to enter information
// for a new contact.
DataEntryForm def = new DataEntryForm (this, "Insert");
// If the bOk Boolean flag is set, this indicates the user
// exited the form by pressing the Ok button.
if (def.bOk)
// Create a Customer object and assign information from
// the form to its fields.
Customer temp = new Customer ();
temp.name = new String (def.name.getText ());
temp.publication = new String (def.publication.getText ());
temp.address = new String (def.address.getText ());
temp.round = new String (def.round.getText ());
temp.phone = new String
(def.phone.getText ());
// Add a new customer item to the names component.
names.add (temp.publication + ", " + temp.address);
// Add the Customer object to the contacts Vector
// object.
customers.add (temp);
// Make sure that the Delete and Update buttons are
// enabled.
delete.setEnabled (true);
update.setEnabled (true);
// Destroy the dialog box.
def.dispose ();
// Make sure that the first customer item in the names list
// is highlighted.
names.select (0);
// ===========================================================
// Load all customers from customers.dat into the customers
// Vector object. Also, make sure that the last name/first
// name from each contact is combined into a String object and
// inserted into the names component - as a contact item.
// ===========================================================
private void loadCustomers ()
FileInputStream fis = null;
try
fis = new FileInputStream ("customers.dat");
DataInputStream dis = new DataInputStream (fis);
int nCustomers = dis.readInt ();
for (int i = 0; i < nCustomers; i++)
Customer temp = new Customer ();
temp.name = dis.readUTF ();
temp.publication = dis.readUTF ();
temp.address = dis.readUTF ();
temp.round = dis.readUTF ();
temp.phone = dis.readUTF ();
names.add (temp.publication + ", " + temp.address);
customers.add (temp);
if (nCustomers > 0)
delete.setEnabled (true);
update.setEnabled (true);
catch (IOException e)
finally
if (fis != null)
try
fis.close ();
catch (IOException e) {}
// Make sure that the first customer item in the names list
// is highlighted.
names.select (0);
// ========================================================
// Save all customer objects from the contacts Vector object
// to customers.dat. The number of contacts are saved as an
// int to make it easy for loadCustomers () to do its job.
// ========================================================
private void saveCustomers ()
FileOutputStream fos = null;
try
fos = new FileOutputStream ("customers.dat");
DataOutputStream dos = new DataOutputStream (fos);
dos.writeInt (customers.size ());
for (int i = 0; i < customers.size (); i++)
Customer temp = (Customer) customers.elementAt (i);
dos.writeUTF (temp.name);
dos.writeUTF (temp.publication);
dos.writeUTF (temp.address);
dos.writeUTF (temp.round);
dos.writeUTF (temp.phone);
catch (IOException e)
MsgBox mb = new MsgBox (this, "PP Error",
e.toString ());
mb.dispose ();
finally
if (fos != null)
try
fos.close ();
catch (IOException e) {}
private void update ()
// Obtain index of selected customer item from the names
// component.
int index = names.getSelectedIndex ();
// If no item was selected, index is -1. We cannot update
// a customer if no customer item in the names component was
// selected - because we would have nothing to work with.
if (index != -1)
// Obtain a reference to the Customer object (from the
// customer Vector object) that is associated with the
// index.
Customer temp = (Customer) customers.elementAt (index);
// Create and display an update entry form.
DataEntryForm def = new DataEntryForm (this, "Update",
temp.name,
temp.publication,
temp.address,
temp.round,
temp.phone);
// If the user pressed Ok...
if (def.bOk)
// Update the customer information in the customers
// Vector object.
temp.name = new String (def.name.getText ());
temp.publication = new String (def.publication.getText ());
temp.address = new String (def.address.getText ());
temp.round = new String (def.round.getText ());
temp.phone = new String (def.phone.getText ());
// Make sure the screen reflects the update.
names.replaceItem (temp.publication + ", " + temp.address,
index);
// Destroy the dialog box.
def.dispose ();
// Make sure that the first customer item in the names
// list is highlighted.
names.select (0);
// ========================================================
// Class: Customer
// This class describes the contents of a business customer.
// ========================================================
class Customer
public String name;
public String publication;
public String address;
public String round;
public String phone;
// ==========================================================
// Class: DataEntryForm
// This class provides a data entry form for entering customer
// information.
// ==========================================================
class DataEntryForm extends JDialog implements ActionListener
// bOk is a boolean flag. When true, it indicates that
// the Ok button was pressed to terminate the dialog box
// (as opposed to the Cancel button).
public boolean bOk;
// The following components hold the text that the user
// entered into the visible text fields.
public JTextField name;
public JTextField publication;
public JTextField address;
public JTextField round;
public JTextField phone;
public void actionPerformed (ActionEvent e)
// If the user pressed the Ok button, indicate this
// by assigning true to bOk.
if (e.getActionCommand ().equals ("Ok"))
bOk = true;
// Destroy the dialog box and return to the point
// just after the creation of the DataEntryForm object.
dispose ();
public DataEntryForm (JFrame parent, String title)
// Call the other constructor. The current constructor
// is used for insert operations. The other constructor
// is used for update operations.
this (parent, title, "", "", "", "", "");
public DataEntryForm (JFrame parent, String title,
String name, String publication,
String address, String round,
String phone)
// Initialize the superclass layer.
super (parent, title, true);
// Choose a grid bag layout so that components can be more
// accurately positioned. (It looks nicer.)
setLayout (new GridBagLayout ());
// Add appropriate first name, last name, phone, fax, and
// email components to the current DataEntryForm container.
// (Remember, DataEntryForm is a subclass of Dialog.
// Dialog is a container. Therefore, DataEntryForm
// inherits the ability to be a container.)
addComponent (this, new JLabel ("Name: "), 0, 0, 1, 1,
GridBagConstraints.NONE,
GridBagConstraints.WEST);
this.name = new JTextField (15);
addComponent (this, this.name, 1, 0, 1, 1,
GridBagConstraints.NONE,
GridBagConstraints.CENTER);
if (title.equals ("Update"))
this.name.setText (name);
addComponent (this, new JLabel ("Publications: "), 0, 1, 1, 1,
GridBagConstraints.NONE,
GridBagConstraints.WEST);
this.publication = new JTextField (15);
addComponent (this, this.publication, 1, 1, 1, 1,
GridBagConstraints.NONE,
GridBagConstraints.CENTER);
if (title.equals ("Update"))
this.publication.setText (publication);
addComponent (this, new JLabel ("Address "), 0, 2, 1, 1,
GridBagConstraints.NONE,
GridBagConstraints.WEST);
this.address = new JTextField (15);
addComponent (this, this.address, 1, 2, 1, 1,
GridBagConstraints.NONE,
GridBagConstraints.CENTER);
if (title.equals ("Update"))
this.address.setText (address);
addComponent (this, new JLabel ("Round No "), 0, 3, 1, 1,
GridBagConstraints.NONE,
GridBagConstraints.WEST);
this.round = new JTextField (15);
addComponent (this, this.round, 1, 3, 1, 1,
GridBagConstraints.NONE,
GridBagConstraints.CENTER);
if (title.equals ("Update"))
this.round.setText (round);
addComponent (this, new JLabel ("Phone Number "), 0, 4, 1, 1,
GridBagConstraints.NONE,
GridBagConstraints.WEST);
this.phone = new JTextField (15);
addComponent (this, this.phone, 1, 4, 1, 1,
GridBagConstraints.NONE,
GridBagConstraints.CENTER);
if (title.equals ("Update"))
this.phone.setText (phone);
addComponent (this, new JLabel (""), 0, 5, 1, 1,
GridBagConstraints.NONE,
GridBagConstraints.CENTER);
addComponent (this, new JLabel (""), 1, 5, 1, 1,
GridBagConstraints.NONE,
GridBagConstraints.CENTER);
JButton b;
// Add an Ok button to this container.
addComponent (this, b = new JButton ("Ok"), 0, 6, 1, 1,
GridBagConstraints.NONE,
GridBagConstraints.CENTER);
b.addActionListener (this);
// Add a Cancel button to this container.
addComponent (this, b = new JButton ("Cancel"), 1, 6, 1, 1,
GridBagConstraints.NONE,
GridBagConstraints.CENTER);
b.addActionListener (this);
// Set the size of the dialog window to 250 pixels
// horizontally by 200 pixels vertically.
setSize (250, 200);
// Do not allow users to resize the dialog window.
setResizable (false);
// Make sure that the dialog window is visible.
setVisible (true);
private void addComponent (Container con, Component com,
int gridx, int gridy,
int gridw, int gridh, int fill,
int anchor)
// Get the current layout manager. It is assumed to
// be a GridBagLayout object.
LayoutManager lm = con.getLayout ();
// Create a GridBagConstraints object to make it
// possible to customize component positioning.
GridBagConstraints gbc = new GridBagConstraints ();
// Assign the x and y grid positions.
gbc.gridx = gridx;
gbc.gridy = gridy;
// Assign the number of grid blocks horizontally and
// vertically that are occupied by the component.
gbc.gridwidth = gridw;
gbc.gridheight = gridh;
// Specify the component's resize policy (fill) and
// the direction in which the component is positioned
// when its size is smaller than available space (anchor).
gbc.fill = fill;
gbc.anchor = anchor;
// Set the new constraints that the grid bag layout
// manager will use.
((GridBagLayout) lm).setConstraints (com, gbc);
// Add the component to the container.
con.add (com);
// ===========================================================
// Class: MsgBox
// This class displays a message box to the user. The message
// is usually an error message. The user must press the Ok
// button to terminate the message box.
// ===========================================================
class MsgBox extends JDialog implements ActionListener
public void actionPerformed (ActionEvent e)
// Terminate the dialog box in response to the user
// pressing the Ok button.
dispose ();
public MsgBox (JFrame parent, String title, String msg)
// Initialize the superclass layer.
super (parent, title, true);
// Store the msg argument in a Label object and add
// this object to the center part of the dialog window.
JLabel l = new JLabel (msg);
add ("Center", l);
// Create a Button object and add it to the south part
// of the dialog window.
JButton b = new JButton ("Ok");
add ("South", b);
// Make the current object a listener to events that
// occur as a result of the user pressing the Ok
// button.
b.addActionListener (this);
// Make sure that the Ok button has the focus.
b.requestFocus ();
// Do not allow users to resize the dialog window.
setResizable (false);
// Allow the layout manager to choose an appropriate
// size for the dialog window.
pack ();
// Make sure that the dialog window is visible.
setVisible (true);
}

Difference between ok_code and sy-ucomm

Hi,
Can any one tell me the difference between ok_code and sy-ucomm

Hi,
Actually OK_CODE and SY-Ucomm are the same. But experts suggest use of OK code for following reason:
In each PAI event that a user triggers by choosing either a pushbutton on the screen or an element in a GUI status, the corresponding function code is placed into the system field SYST-UCOMM or SY-UCOMM and placed in the OK_CODE field (as long as the function code is not empty). Empty function codes are placed in neither the SY-UCOMM field nor the OK_CODE field.
In your ABAP programs, you should work with the OK_CODE field instead of SY-UCOMM. There are two reasons for this: Firstly, the ABAP program has full control over fields declared within it, and secondly, you should never change the value of an ABAP system field. However, you should also always initialize the OK_CODE field in an ABAP program for the following reason:
In the same way that the OK_CODE field in the ABAP program and the system field SY-UCOMM receive the contents of the corresponding screen fields in the PAI event, their contents are also assigned to the OK_CODE screen field and system field SYST-UCOMM in the PBO event. Therefore, you must clear the OK_CODE field in the ABAP program to ensure that the function code of a screen is not already filled in the PBO event with an unwanted value. This is particularly important when the next PAI event can be triggered with an empty function code (for example, using ENTER). Empty function codes do not affect SY-UCOMM or the OK_CODE field, and consequently, the old field contents are transported.

Difference between BAPI and BADI

Hi,
Can anyone explain the difference between BAPI and BADI?

Hi Naveen,
BAPI - It is nothing, but a FM which is used to load the data into SAP system. The data may be from the Legacy system.
BADI - They are the enhancement which can be applied to the standard SAP program as per the business requirement. BADI are the newer version of user exits which uses ABAP OOPs concept.
Revert back if you have further query.
Reward points if useful.
Regards,
Atish

Differences between LSMW and BDC

Hi All
Please can you give me the few points about the differences between LSMW and BDC?
Awaiting for your Responce
Praveen

Hai Check with the following document
GOOD
THERE IS THREE TYPE OF METHOD IN BDC
BDC SESSION
CALL TRANSACTION
CALL DIALOG
What is BDC or batch input
The Batch Input is a SAP technic that allows automating the input in transactions. It lies on a BDC (Batch Data Commands) scenario.
BDC functions:
· BDC_OPEN_GROUP : Opens a session group
· BDC_CLOSE_GROUP : Closes a session
· BDC_INSERT : Insert a BDC scenario in the session
· The ABAP statement "CALL TRANSACTION" is also called to run directly a transaction from its BDC table.
It runs the program RSBDCSUB in order to launch automatically the session. The session management is done through the transaction code SM35.
The object itself is maintanable through the transaction SE24.
BDC methods:
Method
Description
Parameters
OPEN_SESSION
Opens a session
SUBRC (Return Code 0 OK)
SESSIONNAME (Session to be created)
CLOSE_SESSION
Closes a session
None
RESET_BDCDATA
Resets the BDC Internal Table...
None. Normally, for internal purpose
BDC_DYNPRO
Handles a new screen
PROGNAME (Name of the program)
DYNPRONR (Screen Number)
BDC_FIELD
Puts a value on the screen
FIELDNAME (Name of the field)
FIELDVALUE (Value to be passed)
CONSTRUCTOR
Constructor - Initializes NO_DATA
NODATA (No data character). The constructor is called automatically when the object is created.
RUN_SESSION
Launches a session with RSBDCBTC
None
CALL_TRANSACTION
Calls a transaction with the current BDC Data
MODE (Display Mode)
UPDATE (Update Mode)
TCODE (Transaction to be called)
BDC_INSERT
Inserts the BDC scenario in the session
TCODE (Transaction to be called)
BDC techniques used in programs:
1) Building a BDC table and calling a transaction,
2) Building a session and a set of BDC scenarios and keeping the session available in SM35,
3) Building a session and lauching the transaction right after closing the session.
BDC using Call Transaction
BDC using Call transaction involves calling an SAP transaction in back ground from within the ABAP
program. The process involves building an Internal BDC table containing the screen information needed to
execute the required transaction and then passing this to the Call transaction command (See code example).
The full procedure for creating a BDC program is as follows:
What is the difference between batch input and call transaction in BDC?
Session method.
1) synchronous processing.
2) can tranfer large amount of data.
3) processing is slower.
4) error log is created
5) data is not updated until session is processed.
Call transaction.
1) asynchronous processing
2) can transfer small amount of data
3) processing is faster.
4) errors need to be handled explicitly
5) data is updated automatically
BATINPUT/DIRECT INPUT
A: Batch-inputs can not be used to fill the "delivery due list" screen because it is not a dynpro. This is a standard SAP report. A SAP report (check with "System -> Status") may be called using SUBMIT sentence with the appropriate options . It is preferred to call a report than create a Batch-input program.
GO THROUGH THIS LINK
http://www.guidancetech.com/people/holland/sap/abap/zzsni001.htm
The LSM Workbench is an SAP R/3 based tool that supports the one-time or periodic transfer of data from non-SAP systems ("legacy systems") to SAP systems.
The LSM Workbench helps you to organize your data migration project and guides you through the process by using a clear sequence of steps.
The most common conversion rules are predefined. Reusable conversion rules assure consistent data conversion for different data objects.
LSMW vs DX Workbench
The LSM Workbench covers the following steps:
Read the legacy data from one or several files (e.g. spreadsheet tables, sequential files).
Convert the data from source format to target format.
Import the data using standard interfaces (Batch Input, Direct Input, BAPI, IDoc).
Experiences made in successful implementation projects have shown that using the LSM Workbench significantly contributes to accelerating data migration.
SAP provides this tool along with documentation to customers and partners free of charge.
Users of the LSM Workbench receive the usual support via SAP Net - R/3 Frontend (component BC-SRV-DX-LSM).
Releases:
Version 1.7.2 of the LSM Workbench ("LSMW 1.7.2") available
Attention : LSMW 1.7.2 requires an SAP R/3 system with SAP R/3 4.0 or SAP R/3 4.5.
Version 1.8.0 of the LSM Workbench (1.21mb) ("LSMW 1.8.0") available
Attention : LSMW 1.8.0 requires an SAP R/3 system with SAP R/3 4.6.
Version 3.0 of the LSM Workbench (1.89mb) ("LSMW 3.0") available for Web Application Server 6.10
Attention : LSMW 3.0 requires a SAP WAS 6.10. Functionality of version 1.7.2 and 3.0 are identical !
Version 4.0 of the LSM Workbench ("LSMW 4.0") integrated in Web Application Server 6.20
Attention : LSMW 4.0 is an integrated part of SAP WAS 6.20.
Thanks & regards
Sreenivasulu P
Message was edited by: Sreenivasulu Ponnadi

MAIN DIFFERENCES BETWEEN PARALLEL AND SEQUENTAIL PRCESSING???

HI PALS,
I WANT THE COMPLETE DIFFERENCES BETWEEN PARALLEL AND SEQUENTIAL PROCESSING!
IN THE CONTEXT OF RFC.

Hi
Parallel Processing
To achieve a balanced distribution of the system load, you can use destination additions to execute function modules in parallel tasks in any application server or in a predefined application server group of an SAP system.
Parallel-processing is implemented with a special variant of asynchonous RFC. Itu2019s important that you use only the correct variant for your own parallel processing applications: the CALL FUNCTION STARTING NEW TASK DESTINATION IN GROUP keyword. Using other variants of asynchronous RFC circumvents the built-in safeguards in the correct keyword, and can bring your system to its knees
Details are discussed in the following subsections:
·        Prerequisites for Parallel Processing
·        Function Modules and ABAP Keywords for Parallel Processing
·        Managing Resources in Parallel Processing
Prerequisites for Parallel Processing
Before you implement parallel processing, make sure that your application and your SAP system meet these requirements:
·        Logically-independent units of work:
The data processing task that is to be carried out in parallel must be logically independent of other instances of the task. That is, the task can be carried out without reference to other records from the same data set that are also being processed in parallel, and the task is not dependent upon the results of others of the parallel operations. For example, parallel processing is not suitable for data that must be sequentially processed or in which the processing of one data item is dependent upon the processing of another item of the data.
By definition, there is no guarantee that data will be processed in a particular order in parallel processing or that a particular result will be available at a given point in processing.
·        ABAP requirements:
¡        The function module that you call must be marked as externally callable. This attribute is specified in the Remote function call supported field in the function module definition (transaction SE37).
¡        The called function module may not include a function call to the destination u201CBACK.u201D
¡        The calling program should not change to a new internal session after making an asynchronous RFC call. That is, you should not use SUBMIT or CALL TRANSACTION in such a report after using CALL FUNCTION STARTING NEW TASK.
¡        You cannot use the CALL FUNCTION STARTING NEW TASK DESTINATION IN GROUP keyword to start external programs.
·        System resources:
In order to process tasks from parallel jobs, a server in your SAP system must have at least 3 dialog work processes. It must also meet the workload criteria of the parallel processing system: Dispatcher queue less than 10% full, at least one dialog work process free for processing tasks from the parallel job.
Function Modules and ABAP Keywords for Parallel Processing
You can implement parallel processing in your applications by using the following function modules and ABAP keywords:
·        SPBT_INITIALIZE: Optional function module.
Use to determine the availability of resources for parallel processing.
You can do the following:
¡        check that the parallel processing group that you have specified is correct.
¡        find out how many work processes are available so that you can more efficiently size the packets of data that are to be processed in your data.
·        CALL FUNCTION Remotefunction STARTING NEW TASK Taskname DESTINATION IN GROUP:
With this ABAP statement, you are telling the SAP system to process function module calls in parallel. Typically, youu2019ll place this keyword in a loop in which you divide up the data that is to be processed into work packets. You can pass the data that is to be processed in the form of an internal table (EXPORT, TABLE arguments). The keyword implements parallel processing by dispatching asynchronous RFC calls to the servers that are available in the RFC server group specified for the processing.
Note that your RFC calls with CALL FUNCTION are processed in work processes of type DIALOG. The DIALOG limit on processing of one dialog step (by default 300 seconds, system profile parameter rdisp/max_wprun_time) applies to these RFC calls. Keep this limit in mind when you divide up data for parallel processing calls.
·        SPBT_GET_PP_DESTINATION: Optional function module.
Call immediately after the CALL FUNCTION keyword to get the name of the server on which the parallel processing task will be run.
·        SPBT_DO_NOT_USE_SERVER: Optional function module.
Excludes a particular server from further use for processing parallel processing tasks. Use in conjunction with SPBT_GET_PP_DESTINATION if you determine that a particular server is not available for parallel processing (for example, COMMUNICATION FAILURE exception if a server becomes unavailable).
·        WAIT: ABAP keyword
WAIT UNTIL
Required if you wish to wait for all of the asynchronous parallel tasks created with CALL FUNCTION to return. This is normally a requirement for orderly background processing. May be used only if the CALL FUNCTION includes the PERFORMING ON RETURN addition.
·        RECEIVE: ABAP keyword
RECEIVE RESULTS FROM FUNCTION Remotefunction
Required if you wish to receive the results of the processing of an asynchronous RFC. RECEIVE retrieves IMPORT and TABLE parameters as well as messages and return codes.
Managing Resources in Parallel Processing
You use the following destination additions to perform parallel execution of function modules (asynchronous calls) in the SAP system:
In a predefined group of application servers:
CALL FUNCTION Remotefunction STARTING NEW TASK Taskname
DESTINATION IN GROUP Groupname
In all currently available and active application servers:
CALL FUNCTION Remotefunction STARTING NEW TASK Taskname
DESTINATION IN GROUP DEFAULT
Sequential Processing
In the following cases, the system chooses sequential (non-parallel) processing:
●      In table RSADMIN, entry QUERY_MAX_WP_DIAG has value (column value) 1.
●      The entire query consists of one sub-access only.
●      The query is running in a batch process.
●      The query was started from the query monitor (transaction RSRT) using various debug options (for example, SQL query display, execution plan display). See, Dividing a MultiProvider Query into Sub-Queries.
●      The query requests non-cumulative key figures.
●      Insufficient dialog processes are available when the query is executed. These are required for parallel processing.
●      The query is configured for non-parallel processing.
●      You want to save the result of the query in a file or a table.
In Release SAP NetWeaver 7.0, the system can efficiently manage the large intermediate results produced by parallel processing. In previous releases, the system terminated when it reached a particular intermediate result size and proceeded to read data sequentially. This is no longer the case. Therefore, the RSADMIN parameter that was used in previous releases for reading a MultiProvider sequentially is no longer used.
Reward If Helpfull,
Naresh

Difference between BAPI and RFC?

Difference between BAPI and RFC?
also where to use BAPI and where to use RFC?

Hi,
BAPI are RFC enabled function modules. the difference between RFc and BAPI are business objects. You create business objects and those are then registered in your BOR (Business Object Repository) which can be accessed outside the SAP system by using some other applications (Non-SAP) such as VB or JAVA. in this case u only specify the business object and its method from external system in BAPI there is no direct system call. while RFC are direct system call Some BAPIs provide basic functions and can be used for most SAP business object types. These BAPIs should be implemented the same for all business object types. Standardized BAPIs are easier to use and prevent users having to deal with a number of different BAPIs. Whenever possible, a standardized BAPI must be used in preference to an individual BAPI.
The following standardized BAPIs are provided:
Reading instances of SAP business objects
GetList ( ) With the BAPI GetList you can select a range of object key values, for example, company codes and material numbers.
The BAPI GetList() is a class method.
GetDetail() With the BAPI GetDetail() the details of an instance of a business object type are retrieved and returned to the calling program. The instance is identified via its key. The BAPI GetDetail() is an instance method. BAPIs that can create, change or delete instances of a business object type
The following BAPIs of the same object type have to be programmed so that they can be called several times within one transaction. For example, if, after sales order 1 has been created, a second sales order 2 is created in the same transaction, the second BAPI call must not affect the consistency of the sales order 2. After completing the transaction with a COMMIT WORK, both the orders are saved consistently in the database.
Create( ) and CreateFromData! ( )
The BAPIs Create() and CreateFromData() create an instance of an SAP business object type, for example, a purchase order. These BAPIs are class methods.
Change( )
The BAPI Change() changes an existing instance of an SAP business object type, for example, a purchase order. The BAPI Change () is an instance method.
Delete( ) and Undelete( ) The BAPI Delete() deletes an instance of an SAP business object type from the database or sets a deletion flag.
The BAPI Undelete() removes a deletion flag. These BAPIs are instance methods.
Cancel ( ) Unlike the BAPI Delete(), the BAPI Cancel() cancels an instance of a business object type. The instance to be cancelled remains in the database and an additional instance is created and this is the one that is actually canceled. The Cancel() BAPI is an instance method.
Add<subobject> ( ) and Remove<subobject> ( ) The BAPI Add<subobject> adds a subobject to an existing object inst! ance and the BAPI and Remove<subobject> removes a subobject from an object instance. These BAPIs are instance methods.
Regards,
Prakash

Difference between Initialization and Load-of-Program

Similar Messages

Maybe you are looking for