Difference between interface and bdc

Hi All,
Can anybody please explain interface and BDC.
Thanks in advance

Hi
Interface is the one which is used to transfer data from SAP to Non SAP system or NON SAP to SAP system.
BAPI, IDOC are some of the interfaces.
BDC is used to upload data from Legacy to SAP system.
Reward points if useful
Regards
Anji

Similar Messages

Differences between LSMW and BDC

Hi All
Please can you give me the few points about the differences between LSMW and BDC?
Awaiting for your Responce
Praveen

Hai Check with the following document
GOOD
THERE IS THREE TYPE OF METHOD IN BDC
BDC SESSION
CALL TRANSACTION
CALL DIALOG
What is BDC or batch input
The Batch Input is a SAP technic that allows automating the input in transactions. It lies on a BDC (Batch Data Commands) scenario.
BDC functions:
· BDC_OPEN_GROUP : Opens a session group
· BDC_CLOSE_GROUP : Closes a session
· BDC_INSERT : Insert a BDC scenario in the session
· The ABAP statement "CALL TRANSACTION" is also called to run directly a transaction from its BDC table.
It runs the program RSBDCSUB in order to launch automatically the session. The session management is done through the transaction code SM35.
The object itself is maintanable through the transaction SE24.
BDC methods:
Method
Description
Parameters
OPEN_SESSION
Opens a session
SUBRC (Return Code 0 OK)
SESSIONNAME (Session to be created)
CLOSE_SESSION
Closes a session
None
RESET_BDCDATA
Resets the BDC Internal Table...
None. Normally, for internal purpose
BDC_DYNPRO
Handles a new screen
PROGNAME (Name of the program)
DYNPRONR (Screen Number)
BDC_FIELD
Puts a value on the screen
FIELDNAME (Name of the field)
FIELDVALUE (Value to be passed)
CONSTRUCTOR
Constructor - Initializes NO_DATA
NODATA (No data character). The constructor is called automatically when the object is created.
RUN_SESSION
Launches a session with RSBDCBTC
None
CALL_TRANSACTION
Calls a transaction with the current BDC Data
MODE (Display Mode)
UPDATE (Update Mode)
TCODE (Transaction to be called)
BDC_INSERT
Inserts the BDC scenario in the session
TCODE (Transaction to be called)
BDC techniques used in programs:
1) Building a BDC table and calling a transaction,
2) Building a session and a set of BDC scenarios and keeping the session available in SM35,
3) Building a session and lauching the transaction right after closing the session.
BDC using Call Transaction
BDC using Call transaction involves calling an SAP transaction in back ground from within the ABAP
program. The process involves building an Internal BDC table containing the screen information needed to
execute the required transaction and then passing this to the Call transaction command (See code example).
The full procedure for creating a BDC program is as follows:
What is the difference between batch input and call transaction in BDC?
Session method.
1) synchronous processing.
2) can tranfer large amount of data.
3) processing is slower.
4) error log is created
5) data is not updated until session is processed.
Call transaction.
1) asynchronous processing
2) can transfer small amount of data
3) processing is faster.
4) errors need to be handled explicitly
5) data is updated automatically
BATINPUT/DIRECT INPUT
A: Batch-inputs can not be used to fill the "delivery due list" screen because it is not a dynpro. This is a standard SAP report. A SAP report (check with "System -> Status") may be called using SUBMIT sentence with the appropriate options . It is preferred to call a report than create a Batch-input program.
GO THROUGH THIS LINK
http://www.guidancetech.com/people/holland/sap/abap/zzsni001.htm
The LSM Workbench is an SAP R/3 based tool that supports the one-time or periodic transfer of data from non-SAP systems ("legacy systems") to SAP systems.
The LSM Workbench helps you to organize your data migration project and guides you through the process by using a clear sequence of steps.
The most common conversion rules are predefined. Reusable conversion rules assure consistent data conversion for different data objects.
LSMW vs DX Workbench
The LSM Workbench covers the following steps:
Read the legacy data from one or several files (e.g. spreadsheet tables, sequential files).
Convert the data from source format to target format.
Import the data using standard interfaces (Batch Input, Direct Input, BAPI, IDoc).
Experiences made in successful implementation projects have shown that using the LSM Workbench significantly contributes to accelerating data migration.
SAP provides this tool along with documentation to customers and partners free of charge.
Users of the LSM Workbench receive the usual support via SAP Net - R/3 Frontend (component BC-SRV-DX-LSM).
Releases:
Version 1.7.2 of the LSM Workbench ("LSMW 1.7.2") available
Attention : LSMW 1.7.2 requires an SAP R/3 system with SAP R/3 4.0 or SAP R/3 4.5.
Version 1.8.0 of the LSM Workbench (1.21mb) ("LSMW 1.8.0") available
Attention : LSMW 1.8.0 requires an SAP R/3 system with SAP R/3 4.6.
Version 3.0 of the LSM Workbench (1.89mb) ("LSMW 3.0") available for Web Application Server 6.10
Attention : LSMW 3.0 requires a SAP WAS 6.10. Functionality of version 1.7.2 and 3.0 are identical !
Version 4.0 of the LSM Workbench ("LSMW 4.0") integrated in Web Application Server 6.20
Attention : LSMW 4.0 is an integrated part of SAP WAS 6.20.
Thanks & regards
Sreenivasulu P
Message was edited by: Sreenivasulu Ponnadi

Difference between interface and conversion

could you give me the difference between interface and conversion

hi
Conversion, converting legacy system data into SAP data. Meaning that it is mainly a one shot deal, for example bringing your customer master to SAP from the legacy system, converting the fields used in legacy to the fields and values used in SAP.
Interface, a program or group of programs that handle the passing of data from one system to another. These programs work together to export the data from one system and import into a target system, maybe these programs run once a day, maybe twice, may every hour throughout the day. It is a good way to keep the data in two or more systems in sync with each other.
Interface programs are also data extract program. Data is extracted from SAP into a flat file and transferred to other external systems like UNIX, mainframe.
In data extracts, the file layout is designed and this layout should be in synch with other external systems.
reward poins for useful ans
Regards
Aarti

What is the difference between Interface and Conversion?

Hi friends,
   Can any one teel me What is the difference between Interface and Conversion in detail.
Rewarded with points
Thanks & Regards,
Naren.

Hi,
   interface can be outbound i.e writing data to
   application server using open dataset,transfer
or downloading data (gui_download)
   inbound -> reading data from application server using
              open dataset,read dataset,uploading data
              using gui_upload.
   conversion:BAtch data communication method
              where legavy data is uploaded in SAp.
Regards
Amole

Difference between sapscripts and BDCs

what is the difference between sapscripts and BDCs

BDC for data communication between sap to non sap(vice-versa)
where scripts is a business layout(we create)
bdc help
They are the only 3 methods mostly we use in BDC.
Call _Dialog is outdated. it is there in the intial stages of SAP.
BDC:
Batch Data Communication (BDC) is the process of transferring data from one SAP System to another SAP system or from a non-SAP system to SAP System.
Features :
BDC is an automatic procedure.
This method is used to transfer large amount of data that is available in electronic medium.
BDC can be used primarily when installing the SAP system and when transferring data from a legacy system (external system).
BDC uses normal transaction codes to transfer data.
Types of BDC :
CLASSICAL BATCH INPUT (Session Method)
CALL TRANSACTION
BATCH INPUT METHOD:
This method is also called as CLASSICAL METHOD.
Features:
Asynchronous processing.
Synchronous Processing in database update.
Transfer data for more than one transaction.
Batch input processing log will be generated.
During processing, no transaction is started until the previous transaction has been written to the database.
CALL TRANSACTION METHOD :
This is another method to transfer data from the legacy system.
Features:
Synchronous processing. The system performs a database commit immediately before and after the CALL TRANSACTION USING statement.
Updating the database can be either synchronous or asynchronous. The program specifies the update type.
Transfer data for a single transaction.
Transfers data for a sequence of dialog screens.
No batch input processing log is generated.
For BDC:
http://myweb.dal.ca/hchinni/sap/bdc_home.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/bdc&
http://www.sap-img.com/abap/learning-bdc-programming.htm
http://www.sapdevelopment.co.uk/bdc/bdchome.htm
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
http://help.sap.com/saphelp_47x200/helpdata/en/69/c250684ba111d189750000e8322d00/frameset.htm
http://www.sapbrain.com/TUTORIALS/TECHNICAL/BDC_tutorial.html
Check these link:
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
http://www.sap-img.com/abap/question-about-bdc-program.htm
http://www.itcserver.com/blog/2006/06/30/batch-input-vs-call-transaction/
http://www.planetsap.com/bdc_main_page.htm
call Transaction or session method ?
These are the Function modules used for the Session Method.
BDC_OPEN_GROUP
BDC_INSERT
BDC_CLOSE_GROUP
BDC_DELETE_SESSION to create a session
You can schedule the execution of BDC session using the program RSBDCSUB.
another one call transaction
open dataset
close dataset
reward if it helps u
vijay pawar

ODI:What is the difference between Interface and Interface IN

when we use Interface IN and Interface OUT

Hi,
Trying to help you.
I wasnt used this extensively. Did u had a look at Page 23 (Generate Interface IN/OUT)of the below document?
http://www.oracle.com/technology/products/oracle-data-integrator/10.1.3/htdocs/documentation/oracledi_users.pdf
As long as i know, this will automatically create interface for the Data store you want to.
Thanks,
Guru

Difference between Interface node and normal node?

What is the main difference between Interface node and normal node?
Cheers
Aisurya.

Hi surya,
Interface node or methods comes into picture whenever you want to use one component as used component. I mean to say
Component usages. If you select node as interface node, it will available in another component so you can use that node or methods.
Normal node means in that component only. Simply we can say for component usages we go for interface nodes.
Cehck This...
http://help.sap.com/saphelp_nw70ehp1/helpdata/EN/79/555e3f71e41e26e10000000a114084/content.htm
Cheers,
Kris.

Difference between interface pool and class pool

Hi,
Can any body tell me the difference between Interface pool and Class pool.
thank you in advance.
regards

Hi,
Class and Interface Pools
This section discusses the structure and special features of class and interface pools for global classes.
Global Classes and Interfaces
Classes and interfaces are object types. You can define them either globally in the Repository or locally in an ABAP program. If you define classes and interfaces globally, special ABAP programs called class pools or interface pools of type K or J serve as containers for the respective classes and interfaces. Each class or interface pool contains the definition of a single class or interface. The programs are automatically generated by the Class Builder when you create a class or interface.
A class pool is comparable to a module pool or function group. It contains both declarative and executable ABAP statements, but cannot be started on its own. The runtime system can create runtime instances (objects) through a request using the CREATE OBJECT statement. These objects execute the statements of the class pool.
Interface pools do not contain any executable statements. Instead, they are used as containers for interface definitions. When you implement an interface in a class, the interface definition is implicitly included in the class definition.
Structure of a Class Pool
Class pools are structured as follows:
Class pools contain a definition part for type declarations, and the declaration and implementation parts of the class.
Differences From Other ABAP Programs
Class pools are different from other ABAP programs for the following reasons:
·        ABAP programs such as executable programs, module pools, or function modules, usually have a declaration part in which the global data for the program is defined. This data is visible in all of the processing blocks in the program. Class pools, on the other hand, have a definition part in which you can define data and object types, but no data objects or field symbols. The types that you define in a class pool are only visible in the implementation part of the global class.
·        The only processing blocks that you can use are the declaration part and implementation part of the global class. The implementation part may only implement the methods declared in the global class. You cannot use any of the other ABAP processing blocks (dialog modules, event blocks, subroutines, function modules).
·        The processing blocks of class pools are not controlled by the ABAP runtime environment. No events occur, and you cannot call any dialog modules or procedures. Class pools serve exclusively for class programming. You can only access the data and functions of a class using its interface.
·        Since events and dialog modules are not permitted in classes, you cannot process screens in classes. You cannot program lists and selection screens in classes, since they cannot react to the appropriate events. It is intended to make screens available in classes. Instead of dialog modules, it will be possible to call methods of the class from the screen flow logic.
Local Classes in Class Pools
The classes and interfaces that you define in the definition part of a class pool are not visible externally. Within the class pool, they have a similar function to local classes and interfaces in other ABAP programs. Local classes can only be instantiated in the methods of the global class. Since subroutines are not allowed in class pools, local classes are the only possible modularization unit in global classes. Local classes have roughly the same function for global classes as subroutines in function groups, but with the significant exception that they are not visible externally
Reward points if useful....
Regards
AK

Difference between interface view and interface controller

Hi,
What is the difference between interface controller and interface view?
When we will use interface controller and when we will use interface view?
How do we create an interface view?
How do we attach this interface view to a view in another component
Regards
MQ

Hi
Interface View Controllers
A) Implement event handlers which are called when ..
-starting (start-up plugs) Web Dypro applications
-a component is reached via navigation (inbound plugs)
B) Allow fireing outbound plugs (navigation)
C) Allow firing exit plug
D) Have no own context, public methods or events
Interface Controller of a Component
The interface controller of a Web Dynpro component contains all context nodes, events and methods of the component controller to which you assigned the Interface addition in the Controller Editor. These parts can be displayed in the interface controller view, although you cannot edit them here.
Interface Controller of a Component Interface
A Web Dynpro component interface can be created independently and defined so that it can be implemented later in any components (see working with Web Dynpro Component Interfaces in the Programming Manual of this documentation). That is why in this case you can define the context nodes, methods and events you require in the interface controller view. The relevant implementation then takes place in the component controller of the implementing component.
Check this links and work on it.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/28113de9-0601-0010-71a3-c87806865f26?rid=/library/uuid/49f2ea90-0201-0010-ce8e-de18b94aee2d#13 [original link is broken]
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/28113de9-0601-0010-71a3-c87806865f26?rid=/library/uuid/49f2ea90-0201-0010-ce8e-de18b94aee2d#12 [original link is broken]
Interface view and interface controller
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f727d100-0801-0010-4cbd-b0ad5c161945
Difference between custom controller and interface component
Thanks and Regards,
Tulasi Palnati

What is the difference between conversion and interface?

what is the difference between conversion and interface?

Conversion: The legacy system may have a different representation for the data, from that of SAP. A conversion program basically aims at converting the data into a format that is acceptable for SAP.
Whereas an interface does the actual upload of the data into the SAP system through various means.
Regards,
Ravi

Difference Between BADI and User Exits

Hi..
generally BADIs & User Exis are used exensively in SAP SD...
Can anybody throw some light waht is difference between them ...
Kindly please reply......
Regards
Nisha

Hi
ifference Between BADI and User Exits
Business Add-Ins are a new SAP enhancement technique based on ABAP Objects. They can be inserted into the SAP System to accommodate user requirements too specific to be included in the standard delivery. Since specific industries often require special functions, SAP allows you to predefine these points in your software.
As with customer exits two different views are available:
In the definition view, an application programmer predefines exit points in a source that allow specific industry sectors, partners, and customers to attach additional software to standard SAP source code without having to modify the original object.
In the implementation view, the users of Business Add-Ins can customize the logic they need or use a standard logic if one is available.
In contrast to customer exits, Business Add-Ins no longer assume a two-level infrastructure (SAP and customer solutions), but instead allow for a multi-level system landscape (SAP, partner, and customer solutions, as well as country versions, industry solutions, and the like). Definitions and implementations of Business Add-Ins can be created at each level within such a system infrastructure.
SAP guarantees the upward compatibility of all Business Add-In interfaces. Release upgrades do not affect enhancement calls from within the standard software nor do they affect the validity of call interfaces. You do not have to register Business Add-Ins in SSCR.
The Business Add-In enhancement technique differentiates between enhancements that can only be implemented once and enhancements that can be used actively by any number of customers at the same time. In addition, Business Add-Ins can be defined according to filter values. This allows you to control add-in implementation and make it dependent on specific criteria (on a specific Country value, for example).
All ABAP sources, screens, GUIs, and table interfaces created using this enhancement technique are defined in a manner that allows customers to include their own enhancements in the standard. A single Business Add-In contains all of the interfaces necessary to implement a specific task.
The actual program code is enhanced using ABAP Objects. In order to better understand the programming techniques behind the Business Add-In enhancement concept, SAP recommends reading the section on ABAP Objects.
What is difference between badi and user-exists?
What is difference between enhancements and user-exists? and what is the full form of BADI?
I have another doubt in BDC IN BDC WE HAVE MSEGCALL (i did not remember the > correct name) where the error logs are stored, MSEGCALL is a table or structure.
What is the system landscape?
1) Difference between BADI and USER-EXIT.
    i) BADI's can be used any number of times, where as USER-EXITS can be used only one time.
       Ex:- if your assigning a USER-EXIT to a project in (CMOD), then you can not assign the same to other project.
    ii) BADI's are oops based.
2) About 'BDCMSGCOLL' it is a structure. Used for finding error records.
3) Full form of BADI 'Business addins'.
3) System land scape will be depends on your project
    Ex:- 'Development server'>'Quality server'-> 'Production server'......

Difference between Userexits and BADI

Pls give me the Difference between Userexits and BADI.

Hi,
hope this is helpful
Difference Between BADI and User Exits
Business Add-Ins are a new SAP enhancement technique based on ABAP Objects. They can be inserted into the SAP System to accommodate user requirements too specific to be included in the standard delivery. Since specific industries often require special functions, SAP allows you to predefine these points in your software.
As with customer exits two different views are available:
In the definition view, an application programmer predefines exit points in a source that allow specific industry sectors, partners, and customers to attach additional software to standard SAP source code without having to modify the original object.
In the implementation view, the users of Business Add-Ins can customize the logic they need or use a standard logic if one is available.
In contrast to customer exits, Business Add-Ins no longer assume a two-level infrastructure (SAP and customer solutions), but instead allow for a multi-level system landscape (SAP, partner, and customer solutions, as well as country versions, industry solutions, and the like). Definitions and implementations of Business Add-Ins can be created at each level within such a system infrastructure.
SAP guarantees the upward compatibility of all Business Add-In interfaces. Release upgrades do not affect enhancement calls from within the standard software nor do they affect the validity of call interfaces. You do not have to register Business Add-Ins in SSCR.
The Business Add-In enhancement technique differentiates between enhancements that can only be implemented once and enhancements that can be used actively by any number of customers at the same time. In addition, Business Add-Ins can be defined according to filter values. This allows you to control add-in implementation and make it dependent on specific criteria (on a specific Country value, for example).
All ABAP sources, screens, GUIs, and table interfaces created using this enhancement technique are defined in a manner that allows customers to include their own enhancements in the standard. A single Business Add-In contains all of the interfaces necessary to implement a specific task.
The actual program code is enhanced using ABAP Objects. In order to better understand the programming techniques behind the Business Add-In enhancement concept, SAP recommends reading the section on ABAP Objects.
What is difference between badi and user-exists?
What is difference between enhancements and user-exists? and what is the full form of BADI?
I have another doubt in BDC IN BDC WE HAVE MSEGCALL (i did not remember the > correct name) where the error logs are stored, MSEGCALL is a table or structure.
What is the system landscape?
1) Difference between BADI and USER-EXIT.
    i) BADI's can be used any number of times, where as USER-EXITS can be used only one time.
       Ex:- if your assigning a USER-EXIT to a project in (CMOD), then you can not assign the same to other project.
    ii) BADI's are oops based.
2) About 'BDCMSGCOLL' it is a structure. Used for finding error records.
3) Full form of BADI 'Business addins'.
3) System land scape will be depends on your project
    Ex:- 'Development server'>'Quality server'-> 'Production server'......

The difference between SFP+ and X2

Dear Expert,
I need to know what is the difference between SFP+ and X2! and can I use SFP+ card and module instead of X2?
Thanks,
Mohammad Saeed

Hi,
They are both used for 10Gig interfaces. The difference is the connector type.
SFP+ is LC and X2 is SC.
You can not put an SFP+ into an X2 slot or X2 optic into a SFP+.
HTH

What is the difference between #variable_name and :variable_name?

Hi!
What is the difference between #variable_name and :variable_name?
I have found that if we use alphanumeric variable then :variable_name return value in quotes but #variable_name without quotes.
Why it does not work in the same way for variable default values when variable is used in filter? (It works in mapping)
I use variable in filter like T.OUT_DATE>convert(datetime,:LAST_UPDATE_DATE,121)
When I use my variable in package and do refresh it works fine. But when I try to execute the same interface with variable default value I get error. Seems that variable name has been not changed to the value. It does not work with default value in quotes neither without quotes.
Any ideas how to solve that?
Thank you in advance!
Edited by: user13278245 on Sep 15, 2010 4:34 AM

Question is how to make it work with default value, when I execute interface standalone, not in package? And why it works in mapping but not in filter?
+ I have found that it works if source is Oracle. It doesn't work only for MS SQL source.
Edited by: user13278245 on Sep 15, 2010 6:43 AM

Difference between AR and RA

difference between AR and RA tables in Account Receivables???

Hi,
each table in RA_ /AR_ stores different info.
lets suppose Customer profile RA_ contains interface table. and those details
are available in AR_ tables.
So it depends on each table in AR & RA.
--Basava.S

Difference between interface and bdc

Similar Messages

Maybe you are looking for