Difference between Item Proposal and Dynamic Product Proposal

Dear All,
What is the difference between Item Proposal ( VA51) and Dynamic Product Proposal?
Thanks and Regards
Deepak Joshi

Hi,
In item proposal when u enter the details in the sales document you have to click on propose items to get the list
the customer regularly purchases.
While in dynamic product proposal once you specify the sold to party and press enter , system automaticall gives you
the list of the materials the customer regularly purchases, it a faster way of entry than item proposal.
please let me know if i am wrong.
Thanks,
Mohanprabu, C.

Similar Messages

Difference between requirement number and dynamic bin number

hi,
what is the difference between requirement number and dynamic bin number in the WMS.i used requirement number as bin number in various scenarios ,but i am not used dynamic bin ....what is the use of it....or it is same as requirement bin number.
Thanks
Muthuraman.D

The Dynamic bin number means that SAP will create the number 'Dynamically. the requirement number is free text and is a reference number
If you create an outbound delivery and create a TO to pick it the stock moves to st type 916 and the bin is the delivery number but the delivery number does not exist at this point as a bin and when the delivery has shipped ypu no lomger require that bin number and so SAP creates the bin dynamically and then it disappears when the delivery is shipped
The createion of Dynamic bins is driven by a setting in the movement type so for instance for movement type 601 the dest st type is 916 and the destination st bin in the movement type config (OLMJ) is ticked so that the destination st bin is created 'Dynamically.
Yhis is the same for a GR when the bin is the PO number in 902 because it is created dynamically
I hope that this helps
Frenchy

Difference between Item Cost and Last Evaluated Price

Dear All,
What is the difference between Item Cost and Price in Last Evaluated Price List. Exactly when are they updated?
Regards
Sibasish

Hi Sibasish,
The "Last Evaluated Price" is simply a price list but can't have a direct manipulation like other price lists. Its values may not involve in any accounting transactions if it's not selected for the concerned transaction any way.
On the other hand the item cost is the cost which is maintained by SAP B1 (until and unless you select the Standard Valuation Method), and it gets involved in the accounting transactions where inventory is involved. For e.g. the "COGS" is calculated on the basis of this value.
Please close this thread if answered ... or please let us hear something more from you on this...

Difference between Item Proposal and Material Determination

Hi
What is the difference between the item proposal and material determination product proposal?
Thanks
KM

Hi
Item proposal and product proposal are the same.
Item proposal is the list of materials and order quantities that can be copied into the sales order from the customer master data.
We use VA51 to create the item proposal. Here we get a number.This number is then linked to the customer master data in the sales view. This is very commonly used.
Material determination is very closely related to item proposal /product proposal and is used to swap one material for another in the sales order using the condition technique. I have not seen Material determination procedures used in the projects I have worked.
Item Proposal or Product proposal:
Item proposal is same as product proposal & SAP uses the two terms interchangeably.
An item proposal is a list of materials and order quantities that can be copied into the sales order. Items can also be selected from a list and copied into a sales order.
1) Use transaction [VOV8] to configure the document type ("MS" for product proposal).
2) Use transaction [VA51] to create a proposal.
3) Enter the item proposal on the sales area data (sales tab) of the customer master record.
4) In [VA01] to create a sales order, Select Edit & propose items."
Material determination:
"Material determination uses the condition technique to swap one material for another when certain conditions apply. Material
determination is triggered by the material entered in the line item of the sales order.
Use transaction [VB11] to create a material determination condition record. And [OV12] for configuration of material determination.
Material determination is useful when old product is becoming obsolete or a new product is released by the company at specific date."
Thanks
CGRA

Exact difference between Item category and Account assignment category

Can anyone plz give the exact difference between account assignment category and Item category
Thanks inadvance

Hi,
Account Assignment Category: Key indicating whether an item is to be assigned to an auxiliary account (such as a cost center). The account assignment category determines which account assignment data (e.g. cost center, account number, etc.) is required for the item.
Item category: Identifier indicating the characteristics of an item. The item category determines whether the following are necessary or allowed with regard to an item:
Material number, Additional account assignment, Inventory management in the R/3 System, Goods receipt, Invoice receipt.
Prase

Difference between SAP iTutor and SAP Productivity Pack ?

Hello,
I am evaluating both the subjected tools .. which one is better and more feasible ? I am will grateful if somebody could list the pros and cons also which would further help in the evaluation ?
Thanks a bunch.

Hi Shehryar,
Please note that we now have a new forum created for SAP Productivity Pack.
The link is SAP Productivity Pak / SAP Productivity Composer by ANCILE
Hope this helps,
Kind Regards,
Matthew

Difference between material listing and item proposal?

HI Gurus,
COuld you explain what is the difference between material listing and item proposal?
--james

Hi James,
Item Proposal is automatically proposed by the system while creating a sales order for a specific customer.
This setting is maintained in the Sales Area of customer master under Sales tab.
It can be stored as master records. When you create a sales order, you can refer to an item proposal, look over the proposed items, and copy all or just selected items into the order. If a customer routinely orders the same goods, you can create a proposal and enter it in the customer master record. During sales order processing, the system automatically proposes items from this proposal.
Item Proposal is created using VA51.
Material Listing lists which materials a customer can buy. With material listing or exclusion you can control which materials can be sold to each customer.
A material listing is created for a customer. The customer can only buy the materials contained in the list. The system does not allow any materials to be entered if they are not contained in the material listing.
If no records exist for material listing, the sold-to party, for example, can in principle buy the same materials as the payer. However, if there is a material listing record specific to the sold-to party, the sold-to party can only buy the materials permitted in the list. These materials do not have to be identical to those which the payer can buy.
Material listing and material exclusion are controlled using the condition technique.
Hope it helps.
Regards,
Priyanka

What is the difference between "create set" and "create dynamic set"?

What is the difference between "create set" and "create dynamic set"?
we have a complete cube ready for production that was tested and working without any issues in non-r2. we found that some "create set" assignments don't work in R2. But when changed to from "create set" to "create dynamic set"?
they are working, However, not sure how it will impact other areas of the cube.

Thanks YuliaKlimov, I can reproduce this issue, but I cannot explain the different behaviors between SSAS 2008 and 2008R2. As a workaround,
could you try to use dynamic set or create statics set but with fixed member for example:
CREATE
SET CURRENTCUBE.[Prior Month] AS
[Date].[Date Key].&[20050723].PrevMember
, DISPLAY_FOLDER = 'Relative Period Sets';
Personally, I think your set is dynamic set, because the currentmember is changed base on current selection. You can also submit this issue
on below official link to get confirmation from Product Group:
https://connect.microsoft.com/SQLServer/
Thanks,
Raymond
Raymond Li - MSFT

What is difference between SAP R3 And SAP IS Mills Product

HI Friends
What is difference between SAP R3 And SAP IS Mills Product
What are the futures are availables in IS MIlls
Regards

Hi,
SAP R/3 is the central enterprise version. It is not specifically designed for any inducstry sectors and it can cater many of the industry types.
Is is developed for specific industries an for SMB's (small and medium business). It will have components specifically for the industry.
The SAP Mill Products component adds sector-specific functionality to an ERP system to satisfy the complex requirements of mill industries (e.g. metal, wood, paper, textiles, construction materials, and cable sectors).
These industry segments differ from others primarily in that the materials used have a large number of characteristics and variants. The materials in the segments listed above are also predominantly area-based (e.g. paper, textiles, plastic film) or length-based (e.g. cables, piping). Account must be taken of these material characteristics throughout the entire supply chain.
To cater for the particularities of these industry segments, SAP Mill Products features processes and functions that cover the entire supply-chain cycle from product design and configuration, through planning, order processing, capacity planning and production, to final delivery. Additional functions are available in costing and inventory management. SAP Mill Products are also integrated into Quality Management, Financial Accounting, and Controlling.
Prase

Difference between Transaction Figures and Line Items

Hi,
I gone through FI like FI-GL,FI-AR,FI-AP..there i find...
Line Items & Transaction figures as main...like
in FI we have
Line Items - 0FI_GL_4,0FI_AR_4,0FI_AP_4 etc...
Transaction Figures - 0FI_GL_6,0FI_AR_6,0FI_AP_6 etc...
Now Can some please explain...
what exactly Line Items are?
What exactly Transaction Figures are?
How data flows from end to end in FI? i.e where exactly GL,AR,AP comes into picture..how they are internally related?
Some one please explain me in detail (with expamles if possible) and quick reply is much appreciated...
Regards
Ramsunder

Hi
What exactly line items :
Line items are document items that were posted to a specific account. In contrast to a document item a line item only contains the information from the document that is relevant from the account view.
You can display the following line items:
Open items, Cleared items, Noted items, Parked items ,Items with special G/L transactions (in Accounts Receivable and Accounts Payable),Items with customer or vendor items (in Accounts Receivable and Accounts Payable)
You can display the line items for the following account types: Customer accounts,Vendor accounts,G/L accounts.
What exactly Transaction Figures are?
Transaction figures are the sums of line items on the debit or credit side. The balance is the difference between the debit and the credit transaction figure.
If you take General ledger
AP records all accounting transactions for dealings with suppliers(Vendors). Much of its data is obtained from procurement (Materials Management).
AR records all accounting transactions for dealings with customers. Much of its data is obtained from Sales and Distribution.
Asset Accounting records all accounting transactions relating to the management of assets.
Travel Management manages and calculates travel costs and supports travel planning and travel expenses.
Bank ledger supports the posting of cash flows.
Regards
Chandra Sekhar T

I do video productions for a small local TV station. I use Final Cut Express to edit. I need a new video camera but am at a loss as to what to buy. I know I will get a digital camera but do not know the difference between just digital and digital HD.

I do video productions for a small local TV station. I use Final Cut Express to edit. I need a new video camera but am at a loss as to what to buy. I know I will get a digital camera but do not know the difference between just digital and digital HD. Also, I can not afford an expensive camera and need some advice on which of the available cameras would be best and also work well with a Mac. One last issue, I currently use a Panasonic #CCD camera that takes a tape. When I load video to Final Cut the audio and video are out of sinc. Go figure. Can anyone help with these questions. Karen

Hello Karen,
If you are using Final Cut Express, then look for camcorders that are AVCHD camcorders. Look especially for the AVCHD logo and specific mention of AVCHD in the specs. Most of the major manufacturers produce good quality camdcorders - Canon, Sony, etc.
Also, be aware that there are a lot of "not quite AVCHD" camcorders on the market (sometimes they say they record video as MPEG4-H.264/AVC) - buyer beware!
Most everything you are going to find on the market today is HD, which stands for "high-def".
Regarding your question about the Panasonic camcorder, it's best if you post that as a separate question, and please identify the specific model camcorder and the Easy Setup you are using in FCE.

AppID during application update and Difference between app id and product id

Hi
I understand once a app is in store it has a associated Appid. How does this differs from the product id?
During each app update does the product id's should be same?
or during the store certification process will the appid and the product ids be mapped?
How does the product id and App id differ if this is not the case?
Can you provide some article which actually explains what is the difference between XAP uploaded and xap after certification?
Regards
Varun
Varun Ravindranath Please 'Mark as Answer' if my post answers your question and 'Vote as Helpful' if it helps you.

Hi
In that case the dev account from which the update is done will have the unique id or appid and the appid or the product id mapping will be always done by the store certification process.
I'm not clear on this part whether the developer who does the update of the app should update the id or the process which does the certification of the app as an update will update automatically do it?.
Regards
varun
Varun Ravindranath Please 'Mark as Answer' if my post answers your question and 'Vote as Helpful' if it helps you.

Difference between process order and Production order

Hi Experts,
Can any buddy tell me the difference between process order and production order. Why process order is used for process industries. Why do we use recipe for it and routing for production order ?
Regards,
Amit

Hi Amit
There is a difference between production order and process order.
Supposing a 10,000 lit tank is being manufactured in discrete manufacturing. You have to follow the necessary routing steps and can make by physically seeing its development stage by stage. For this type production you can have a production order.
In case of process of order if some chemical in a reactor is loaded with intial temp of 30 C and need to be heated to 80 C then there is phase change. Hence we use Heating as an operation and the change of temp is phase. For such type of process we process order.
Hope this is useful. Pl reward.
Nanduri

Difference between Material type and Item category

What is the difference between Material type and Item category?
We can differentiate different kind of materails according to material type then why do we have Item category which is also more or less on the same lines.
Both can be considered as a terminology in SAP to group similar kind of materials.
Please let me know the exact difference between the two?

Dear Christino
We can list out so many differences.
When you create a material master record, the material type you choose determines:
- Whether the material is intended for a specific purpose, for example, as a configurable material or process material
- Whether the material number can be assigned internally or externally
- The number range from which the material number is taken
- Which screens appear and in what sequence
- Which departmental data you may enter
- What procurement type the material has; that is, whether it is manufactured in-house or procured externally, or both
Together with the plant, the material type determines the material's inventory management requirement; that is:
- Whether changes in quantity are updated in the material master record
- Whether changes in value are also updated in the stock accounts in financial accounting
In addition, the accounts affected by a material entering or leaving the warehouse depend on the material type.
-Most importantly, Users can be authorized to create materials of specific material types but not based on item category
- Item category will define whether the material should be valuated for stock or it should be considered as non-stock
- Pricing is carried out based on Item Category and not based on Material type
thanks
G. Lakshmipathi

In TCA, what is the difference between Item instance owner and System's own

Hi,
In TCA, what is the difference between Item instance owner and System's owner ?
thanks
siva

...can i make as many iweb websites as i want? ...and as many blogs as i want? ...i have never made one before....
....although, i do have my own small business and i do have a website that i paid a guy to make and also host....(which is a waste of $$$$ in my opinion as i think i can do a better job making one myself through iweb) ....
...anyways, i know it is splitting hairs but what exactly is the diff b/w a blog and a website ....i am under the impression that a blog is just a personal newsletter sort of thing,...?

Difference between Item Proposal and Dynamic Product Proposal

Similar Messages

Maybe you are looking for