Difference between J1IEX Part 1 and J1IEX Part 2 in local excise invoice

Dear all
difference between J1IEX Part 1 and J1IEX Part 2 in local excise invoice or local po
regard
nabil

>
sayednabil wrote:
> Dear all
>
> difference between J1IEX Part 1 and J1IEX Part 2 in local excise invoice or local po
>
> regard
> nabil
Hi Syed,
J1iex Part1 is the term referred to with the Part1 registers in Indian Excise scenario.
There are basically two type of Part1 registers RG23A-1 & RG23C-I based on material type A(raw material) or C(Capital Goods)
Part1 register contains only the material quantity & unit of measure.
Similarly The J1IEX Part2 is referred to RG23 Part2 registers which are again RG23A-2 & RG23C-2 based on material types.
Part2 registers are containing only Excise duty part which has been taken credit.
hope it assists...

Similar Messages

Difference between F.05 and FBL3N amount in local currency

Hey all,
There are difference between standart reports F.05 and FBL3N amount in local currency. Amount in Foreign currencies are the same. What could be the problem?
Thanks,
Esin

FBL3N show you the balances as per the exchange rate of Posting date of the document.
F.05 show you the balances as per the exchange rate of valuation key date.
Also exchange rate type might be different for foreign currency valuation.
Rgds
Murali. N

Difference between primary key and primary index

Dear All,
Hi... .Could you pls tell me the difference between primary key and primary index.
Thanks...

Hi,
Primary Key : It is one which makes an entry of the field unique.No two distinct rows in a table can have the same value (or combination of values) in those columns.
Eg: first entry is 111, if you again enter value 111 , it doesnot allow 111 again. similarly for the strings or characters or numc etc. Remember that for char or numc or string 'NAME' is not equal to 'name'.
Primary Index: this is related to the performance .A database index is a data structure that improves the speed of operations in a table. Indices can be created using one or more columns, providing the basis for both rapid random lookups and efficient ordering of access to records. The disk space required to store the index is typically less than the storage of the table (since indices usually contain only the key-fields according to which the table is to be arranged, and excludes all the other details in the table), yielding the possibility to store indices into memory from tables that would not fit into it. In a relational database an index is a copy of part of a table. Some databases extend the power of indexing by allowing indices to be created on functions or expressions. For example, an index could be created on upper(last_name), which would only store the uppercase versions of the last_name field in the index.
In a database , we may have a large number of records. At the time of retrieving data from the database based on a condition , it is a burden to the db server. so whenever we create a primary key , a primary index is automatically created by the system.
If you want to maintain indices on other fields which are frequently used in where condition then you can create secondary indices.
Reward points if helpful.
Thanks,
Sirisha..

Difference between unique constraint and unique index

1. What is the difference between unique constraint and unique index when unique constraint is always indexed ? Which one is better in this case for better performance ?
2. Is Composite index of 3 columns x,y,z better
or having independent/ seperate indexes on 3 columns x,y,z is better for better performance ?
3. It has been very confusing for me to decide which columns to index, I have indexed most foreignkey columns, is it a good idea ? We do lot of selects and DMLS on most of our tables. Is there any query that I can run and find out if indexes are really being used and if they are improving any performance. I have analyzed and computed my indexes using ANALYZE index index_name validate structure and COMPUTE STATISTICS;
null

1. Unique index is part of unique constraint. Of course you can create standalone unique index. But is is no point to skip the logical view of business if you spend same effort to achive.
You create unique const. Oracle create the unique index for you. You may specify index characteristic in unique constraint.
2. Depends. You can't utilize the composite index if the searching condition is not whole or front part of the indexing key. You can't utilize your index if you query the table for y=2. That is.
3. As old words in database arena, Index may be good or bad for a table depending on the size of table, number of columns in the table... etc. It is very environmental dependent. In fact, It is part of database nomalization. Statistic is a way oracle use to determine the execution plan.
Steve
null

What's difference between JPanel.remove(); and JPanel = null

nice day,
how can remove JPanel (including its JComponents), safe way, can you explain the difference between JPanel.remove () and JPanel = null,
1/ because if JPanel does not contain any static JComponents
2/ or any reference to static objects,
then works as well as JPanel.remove or JPanel = null,
or what and why preferred to avoid some action (to avoid to remove or to avoid to null)

mKorbel wrote:
nice day,
how can remove JPanel (including its JComponents), safe way, can you explain the difference between JPanel.remove () and JPanel = null, Remove the JPanel from the container it was part of and make sure you do not keep any references to it from your own classes. Don't make it any more difficult than it has to be.

What is the difference between Session timeout and Short Session timeout Under Excel Service Application -- session management?

Under Excel Service Application --> session management; what is the difference between Session timeout and Short Session timeout?

Any call made from the API will automatically be set to the “Session Timeout” period, no matter
what. Calls made from EWA (Excel Web Access) will get the “Short Session Timeout” period assigned to it initially.
Short Session Timeout and Session Timeout in Excel Services
Short Session Timeout and Session Timeout in Excel Services - Part 2
Sessions and session time-outs in Excel Services
above links are from old version but still applies to all.
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Difference between Free goods and BOM (ERLA)

Hi,
Could any body throw some light on the Difference between Free goods and BOM(ERLA) to clarify my weired thought.
AS of what i know is Free goods is 1:1 ratio.
The main item will be prices and sub item will be free .
Than same thing is also With BOM (ERLA)
Regards,
Venksys

Hi Venksys
Please note as given below :
Free Goods : This function allows you to offer your customers a product free of charge in the form of free goods when a certain quantity of products is ordered. Free goods is a kind of quantity discount, and is granted in the form of a goods delivery that is free of charge when a certain quantity is purchased. There are Two types of free goods :
1.Inclusive : The customer only pays for part of the goods ordered. The rest of the products are provided at no extra cost. For example, a customer orders for 3 bottels but pays for 2 bottels and 1 is supplied free .
2.Exclusive - The customer pays for the goods ordered, and also receives additional products for free. The materials delivered as free goods will not be the same as that of ordered onces. For examples customer orders 5 bottels , but will receive 1 Bottle opener free.
BOM : It consists of 2 or more items combined and sold as an package : Example : Combination of 1 Tooth paste + 1 tooth brush packed as BOM.
The Higher level Material ( BOM) is not relevant for pricing but relevant for picking : The tooth paste and brush is relevant for pricing and also can be sold independently : The Item cat group of the Header BOM material will be ERLA and for Tooth paste and brush material the Item category group will have TAN.
For more details , please refer to the link below:
http://www.sap-img.com/sap-sd/what-is-bom-referring-to-sap-sd.htm
Thanks and regards
Veera
Edited by: veera PV on Jan 24, 2011 9:06 AM

The difference between FIELD-SYMBOL and normal DATA TYPE

Dear experts,
Please see the example below, both are output the same result.
DATA: EXTERNAL_RECORD(4000),
      POSITION TYPE I,
      LENGTH TYPE N,
      ENTRY TYPE STRING.
EXTERNAL_RECORD = '0005Smith0007Edwards0005Young'.
DO.
LENGTH = EXTERNAL_RECORD+POSITION(4).
IF LENGTH = 0.
    EXIT.
ENDIF.
ADD 4 TO POSITION.
MOVE EXTERNAL_RECORD+POSITION(LENGTH) TO ENTRY.
WRITE ENTRY.
ADD LENGTH TO POSITION.
IF POSITION >= 4000.
    EXIT.
ENDIF.
ENDDO.
--OR It can be written as--
DATA: EXTERNAL_RECORD(4000),
      POSITION TYPE I,
      LENGTH TYPE N.
FIELD-SYMBOLS <ENTRY>.
EXTERNAL_RECORD = '0005Smith0007Edwards0005Young'.
DO.
LENGTH = EXTERNAL_RECORD+POSITION(4).
IF LENGTH = 0.
    EXIT.
ENDIF.
ADD 4 TO POSITION.
ASSIGN EXTERNAL_RECORD+POSITION(LENGTH) TO <ENTRY>.
WRITE <ENTRY>.
ADD LENGTH TO POSITION.
IF POSITION >= 4000.
    EXIT.
ENDIF.
ENDDO.
Is there any special circumstances we need to use FIELD-SYMBOL?
Why is FIELD-SYMBOL is introduce in the first place?
Kindly advice with example.
Thanks in advance for those who can help me on this.

HI,
You can use field symbols to make the program more dynamic. In this example the name of a table control is substituted by a field symbol. Thus you cal call the form with any internal table, using the name of the table control as a parameter.
Example
form insert_row
using p_tc_name.
field-symbols <tc> type cxtab_control. "Table control
assign (p_tc_name) to <tc>.
insert 100 lines in table control
<tc>-lines = 100.
Field symbols allow you to:
**     Assign an alias to a data object(for example, a shortened
        name for data objects structured through several hierarchies
        - <fs>-f instead of rec1-rec2-rec3-f)
**     Set the offset and length for a string variably at runtime
**     Set a pointer to a data object that you determine at runtime (dynamic ASSIGN)
**     Adopt or change the type of a field dynamically at runtime
**     Access components of a structure
**     (from Release 4.5A) Point to lines of an internal table
        (process internal tables without a separate work area)
Field symbols in ABAP are similar to pointers in other programming
languages. However, pointers (as used in PASCAL or C) differ from ABAP
field symbols in their reference syntax.
The statement ASSIGN f to <fs> assigns the field f to field
symbol <fs>. The field symbol <fs> then "points" to the
contents of field f at runtime. This means that all changes to the
contents of f are visible in <fs> and vice versa. You declare
the field symbol <fs> using the statement FIELD-SYMBOLS: <fs>.
Reference syntax
Programming languages such as PASCAL and C use a dereferencing symbol
to indicate the difference between a reference and the object to which
it refers; so PASCAL would use p^ for a pointer instead of p, C would
use *p instead of p. ABAP does not have any such dereferencing symbol.
**     In PASCAL or C, if you assign a pointer p1 to a pointer p2,
you force p1 to point to the object to which p2 refers (reference semantics).
**     In ABAP, if you assign a field symbol <fs1> to a field
symbol <fs2>, <fs1> takes the value of the data object to
which <fs2> refers (value semantics).
**     Field symbols in ABAP are always dereferenced, that is,
they always access the referenced data object. If you want to
change the reference yourself in ABAP, you can use the ASSIGN statement
to assign field symbol <fs1> to field symbol <fs2>.
Using field symbols
You declare field symbols using the FIELD-SYMBOLS statement.
They may be declared either with or without a specific type.
At runtime you assign a field to the field symbol using the ASSIGN
statement. All of the operations on the field symbol act on the field
assigned to it.
When you assign a field to an untyped field symbol, the field symbol
adopts the type of the field. If, on the other hand, you want to assign
a field to a typed field symbol, the type of the field and that of the
field symbol must be compatible.
A field symbol can point to any data object and from Release 4.5A,
they can also point to lines of internal tables.
The brackets (<>) are part of the syntax.
Use the expression <fs> IS ASSIGNED to find out whether the field
symbol <fs> is assigned to a field.
The statement UNASSIGN <fs> sets the field symbol <fs> so
that it points to nothing. The logical expression <fs>
IS ASSIGNED is then false. The corresponding negative expression
is IF NOT <fs> IS ASSIGNED.
An unassigned field symbol <fs> behaves as a constant with
type C(1) and initial value SPACE.
MOVE <fs>
TO dest     Transfers the initial value SPACE to the variable dest
MOVE 'A' to <fs>
Not possible, since <fs> is a constant
(runtime error).
To lift a type restriction, use the CASTING addition in the
ASSIGN statement. The data object is then interpreted as though
it had the data type of the field symbol. You can also do this
with untyped field symbols using the CASTING TYPE <type> addition.
The danger with pointers is that they may point to invalid areas.
This danger is not so acute in ABAP, because the language does not
use address arithmetic (for example, in other languages, pointer p
might point to address 1024. After the statement p = p + 10, it would
point to the address 1034). However, the danger does still exist, and
memory protection violations lead to runtime errors.
A pointer in ABAP may not point beyond a segment boundary. ABAP does
not have one large address space, but rather a set of segments.
Each of the following has its own segment:
*     All global data
*     All local data
*     Each table work area (TABLES)
*     Each COMMON PART
You should only let field symbols move within an elementary field or
structure where ABAP allows you to assign both within the global data
and beyond a field boundary.
Rgds
Umakanth

Important differences between oracle 10g and 11g

Hi friends, can anyone tell me (pointwise) what are the major (and minor) differences between Oracle 10g and 11g.
Please point me to some documents if possible.
Thanks in advance

The name of the link says it all: "top_features."
In short it is Oracle's list of what they have for marketing and sales reasons designated "top features."
It is not intended to be, and is not, a complete list of features. Often the features Oracle does not
talk about are the most important.
Let me give you some examples. I have never seen Oracle announce DBMS_XPLAN as a new feature
yet you should not run an explain plan without it. Neither have I ever seen Oracle announce the new
NO_DATA_NEEDED predefined exception. I have listed literally hundreds of new features you will not
find in Oracle's new features docs.
I did a presentation at OpenWorld this year as part of the unconference titled "New Features in
Database 11gR2 that Oracle will not announce." It was easy to prepare a one hour presentation with
little fear of being proved incorrect. As I turned out only one of the features I presented was mentioned
by Oracle.
You can find the presentation slides here:
http://www.morganslibrary.org/pres/oow09_ucnf.pdf

What's the difference between Acrobat.exe and AcroRd32.exe?

What's the difference between Acrobat.exe and AcroRd32.exe?

acrobat.exe is part of Adobe Acrobat and acrord32.exe is part of Adobe Reader.

What's the difference between "My Contacts" and "All Contacts"?

What's the difference between "My Contacts" and "All Contacts"?
I have no other account other then my iCloud account (from what I can tell), but "My Contacts" has a significantly smaller number of contacts then "All Contacts".
What's the difference?

Thanks for posting the screenshots, that's helpful. I didn't realize that you were looking at your groups.
"All Contacts" include (as the name implies) all of your contacts. Below that are any contact groups that you may have defined. These would normally be such things as "Work", "Personal", "Doctors", etc.; any groups that you find useful to define. These contain subsets of the "All Contacts" group.
At some point, perhaps inadvertently, you must have created a group called "My Contacts", or imported it to iCloud from your computer. At the time this may have contained all of your contacts and would have had the same number of contacts as the "All Contacts" group. Then over time you probably added 433 additional contacts that were never part of the original "My Contacts" group, resulting in an "All Contacts" group that contained 1465 contacts.
If you don't have any use for the "My Contacts" group, you can delete it by clicking on it on the left sidebar, click the gear icon on the lower left and choose Delete. If you're concerned about doing this, you can make a backup of this group first by selecting it on the left sidebar, clicking on a single contact within the group, pressing Control-A to select them all (they should all be highlighted), then clicking the gear icon and choosing Export vCard. This will create a .vcf file that can later be imported back to iCloud if you ever need to (by clicking the gear icon again and choosing Import vCard).

AppID during application update and Difference between app id and product id

Hi
I understand once a app is in store it has a associated Appid. How does this differs from the product id?
During each app update does the product id's should be same?
or during the store certification process will the appid and the product ids be mapped?
How does the product id and App id differ if this is not the case?
Can you provide some article which actually explains what is the difference between XAP uploaded and xap after certification?
Regards
Varun
Varun Ravindranath Please 'Mark as Answer' if my post answers your question and 'Vote as Helpful' if it helps you.

Hi
In that case the dev account from which the update is done will have the unique id or appid and the appid or the product id mapping will be always done by the store certification process.
I'm not clear on this part whether the developer who does the update of the app should update the id or the process which does the certification of the app as an update will update automatically do it?.
Regards
varun
Varun Ravindranath Please 'Mark as Answer' if my post answers your question and 'Vote as Helpful' if it helps you.

Difference between business area and profit center

hi all
could you please tell me about difference between business area and
profitcenter.
thanks,
regards,
chennuri.

HI
Read below
Profit Center - The profit center view shows the various
internal areas of responsibilities. Objects such as cost
centers, materials, etc can be used for profit center
analysis. Profit center can be used to determine the
revenues, costs, and profitability for specfic areas of
responsibility.
Business Area - Business area forms an important part of
external reporting. Analysis of various segments, product
divisions, regions etc is possible using business areas.
Business Area: This is optional
This can be used cross compane codes
This is for Internal Purpose
It is not Legal Entity like Co Code
The transation entered in Business are, Debit total will
not tally with credit total
Since it is used for segment wise or area wise or line wise
this is used for internal report purpose only .
Balance Shhet and P & L stataments can be drawn on segment
wise
Profit Centre: Generally in terms of SAP or Finance the
meaning of Profit centre is to know the profitabilty.
In same manner , The managers wants to know the ROI from
their investments, obviously we nned to use the tool.
This ROI may be geographically or area wise or division
wise. P.C provided us profitablity of the particular area
for internal purpose ( Only for Internal )
Business Area is an optional entry.Whenever company wants
financial statements businessarea wise we can maintain
BAs.And also we can maintain BA as Segment Wise,Product
Wise,Geographical Location wise.
Profit center is used to know the profits of companies.PC
is also used for to know the profits as aProduct
wise,Segment wise,geographical location wise.If anything
wrong inthis answer plz correct me..
Hope this helps
Good Luck
Hari

Difference between SSA2.0 and 2.1

Hi,
Is there any note that explains the major differences between 2.0 and 2.1 both in terms of data model and SSA UI settings? I see that a few of options I had in 2.0 are missing in 2.1.
Thanks,
Voodi

Hi Voodi,
There are 2 parts to your question.
Primary Role - This concept does not exist in SPM 2.1 This was used in 2.0 to specify which Browse menu (Content Tree) to display. In SPM 2.1 there is only one Browse menu (Content Tree).
Data Source - This concept still exists in SPM 2.1 This is used to determine which 'Dimensions & Measures' are displayed when user wants to create new reports.
So in your case (when using a SPM 2.1 system) you would select the detail data source to create a new detail report and save it under the 'Detail Report' folder, next under measure properties select a specific measure -> under Detail Reports tab you select the detail report created to link it to this measure, provided you are an administrator.
So basically the functionality still exists to create a new detail report and link it to a measure.
Regards,
Rohit

Difference between line type and internal table?

Hi..
I wanted to know, what is the difference between Line type and Internal Table?

Hi,
Before the 4.7 release in SAP if we want to define an internal table we have to write the defination using the occurs statement and we need to define all the fields using INCLUDE STRUCTURE or indidually all the fields ine by one.
From 4.7 release of R/3 SAP introduced the Line type concept and it's part of the ABAP OOPS concept. for internal table defination we don't need to use the occur statements. Instead INCLUDE structure we need to create a Line type for that structure in Se11 and then we can define the internal table like :
DATA : ITAB TYPE TABLE OF <LINE_TYPE>.
Only thing is this table will be a table without header. So for internal table processing we need to define a work area structure of type line of line type . EX:
DATA: WA_ITAB TYPE LINE OF <LINE_TYPE>.
Hope this helps.
Thanks,
Greetson

Difference between J1IEX Part 1 and J1IEX Part 2 in local excise invoice

Similar Messages

Maybe you are looking for