Difference between LO and Fi extraction
Hi,
What are major differences between FI and LO extraction?
Sridhar
Hi,
FI provides direct data extraction that mean you can load data without filling any setup tables in R3 side however LO provides indirect data extraction and that requires to fill setup tables then you can loaddata into BW.Check this thread.
Diffrance between SD extraction and FI extraction
Regards.
Similar Messages
-
Difference between LIS and Lo extraction
Hi,
Wat is the Difference between LIS and LO extraction.
Thanks,
SanuHI
One good difference between lis and los is
lis uses transparent tables where as los use cluster tables
ust some infos about LIS flows....
with Plug-In 2001.2 S2xx-Structures have been replaced by Logistics Extraction Cockpit. However, R/3 releases 4.x support S2xx-Structures and Logistics Extraction Cockpit in parallel.
With new LBWE extractors there are a lot of benefits:
- Detailed Extraction: extraction can be deactivated (e.g. Schedule Line Data) leads to leaner extractors with less volume.
- Document Changes: only BW-relevant data changes will be updated (less upload volume).
- LIS-Tables are not updated reduced data volume due to avoided redundancy.
- Update with Batch-Process (V3) -> no load on daily business (but now there are available different delta methods as the direct delta...)
- No LIS-Know How necessary.
- Functional Enhancements easy to be done.
- Central, uniform maintenance tool for logistics applications (LBWE)
- No Delta-Tables (SnnnBIW1/-2) no double update, no double Data-Storage
- A lot of flows are covered: Purchasing,Inventory Controlling, Shop Floor Control, Quality Management, Shipment, Sales, Shipping, Billing, Plant Maintenance, Customer Service,
hope this helps -
Difference between LO and COPA Extraction and Steps
Hello All,
Can you please share the COPA extraction steps and also advise why COPA is differnt from other extraction (e.g.LIS/LO etc.) mechanisms?
And also advise what should be my aproach for any COPA extraction related reporting projects.
Thanks,
MainakHi Mainak,
COPA Extraction -steps
R/3 System
1. KEB0
2. Select Datasource 1_CO_PA_CCA
3. Select Field Name for Partitioning (Eg, Ccode)
4. Initialise
5. Select characteristics & Value Fields & Key Figures
6. Select Development Class/Local Object
7. Workbench Request
8. Edit your Data Source to Select/Hide Fields
9. Extract Checker at RSA3 & Extract
BW
1. Replicate Data Source
2. Assign Info Source
3. Transfer all Data Source elements to Info Source
4. Activate Info Source
5. Create Cube on Infoprovider (Copy str from Infosource)
6. Go to Dimensions and create dimensions, Define & Assign
7. Check & Activate
8. Create Update Rules
9. Insert/Modify KF and write routines (const, formula, abap)
10. Activate
11. Create InfoPackage for Initialization
12. Maintain Infopackage
13. Under Update Tab Select Initialize delta on Infopackage
14. Schedule/Monitor
15. Create Another InfoPackage for Delta
16. Check on DELTA OptionPls r
17. Ready for Delta Load
LIS, CO/PA, and FI/SL are Customer Generated Generic Extractors, and LO is BW Content Extractors.
LIS is a cross application component LIS of SAP R/3 , which includes, Sales Information System, Purchasing Information System, Inventory Controlling....
Similarly CO/PA and FI/SL are used for specific Application Component of SAP R/3.
CO/PA collects all the OLTP data for calculating contribution margins (sales, cost of sales, overhead costs).
FI/SL collects all the OLTP data for financial accounting, special ledger
Difference: CO-PA / LIS / LO / FI-SL
1)Method for Delta: Time Stamp / LIS InfoStructure / Change Log / PseudoDelta
2) Application Specific: All are
3) Extractors: Customer Generated (CG) / SAP BW Content / CG / CG
4) Tables Used: Line item tables / 1 structure (s5nn). 2 tables (BWl1 and 2) and control change log (TMCBIW) / V3 update(asynchronous) and two tables: VBDATA and ARCFC (change log from SAP R-3 / Three types of tables - Line Item Tables- ZZP(plan) & ZZA(actual), - Total Table ZZT, - Objects Tables ZZO & ZZC
Pls refer:
http://help.sap.com/saphelp_nw04/helpdata/en/ee/cd143c5db89b00e10000000a114084/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sapportals.km.docs/documents/a1-8-4/how%20to%20set%20up%20connection%20co-pa%20-%20extraction
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sapportals.km.docs/documents/a1-8-4/how%20to%20set%20up%20connection%20co-pa%20-%20retraction
Differences between LIS,LO,CO/PA and FI-SL extractors
*Pls Assign points if info is useful*
Regards
CSM Reddy -
Difference between FI and LO extraction
Hi all,
I know extraction using LO cockpit. Can anyone explain me how different is FI extraction? I don't seem to understand the documentation provided in help.
I would appreciate if I can get a step by step of FI extraction.
Thanks in advance.
VLSVLS
Other than help you could see some good documentation in BW Best Practice document
http://help.sap.com/bp_biv235/BI_EN/index.htm
http://help.sap.com/bp_biv235/BI_EN/html/bw.htm
http://help.sap.com/bp_biv235/BI_EN/html/BW/ControllingAnalysis.htm
FI-SL Extraction from help
http://help.sap.com/saphelp_nw04/helpdata/en/c9/fe943b2bcbd11ee10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/6c/743e404e093d3ce10000000a155106/content.htm
COPA Extraction
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/g-i/how to co-pa extraction 3.0x
Hope this helps
Thnaks
Sat -
Difference Between HashMap and HashTable
Difference Between HashMap and HashTable
Please explain with an exampleI have a situation in Java Collection and i am not
able to figure a good solution. I am scared about the
performance and memory that wil be used
I have 5 List objects with thousands and thousands of
records in it. The List is populated by a database
query using jdbcTemplate which return like 200,000
records
Each record is identified by POLICY_ID. They may be
List with multiple records for a POLICY_ID
I want to extract each POLICY_ID from all the 5 List
and make a single List object for each POLICY_ID and
for each List and pass it to a print job which will
print the data for a POLICY_ID
Example
Let say we have POLICY_ID = 15432
List1 has one record for 15432
List2 has one record for 15432
List3 has one record for 15432
List4 has three record for 15432
List5 has three record for 15432
From the 200,000 records in List1 i want to generate
a seperate list with 1 record for policy id 15432 and
let name is Listperpolicy
after this logic we have
Listperpolicy1
Listperpolicy2
Listperpolicy3
Listperpolicy4
Listperpolicy5
call print job ( Listperpolicy1, Listperpolicy2,
Listperpolicy3, Listperpolicy4, Listperpolicy5)
Please let me know
Thanks a Lotttttttttdon't worry about performance until you've got a working application. second-guessing what the performance bottlenecks will be is futile -
Hi,
I've made a silent Office 2013 installer with /admin and put SP1 MSP's in the updates folder.
After deployment under installed updates it shows: Service Pack 1 for Microsoft Office 2013 (KB2817430) 32-Bit Edition
But when I check for new updates, "ServicePack 1 for Microsoft Office 2013 (KB2850036) 32-Bit Edition" is ready for download and install.
What is the difference between KB2817430 and KB2850036?
It seems that I cannot download KB2850036 and also integrate it in the silent installation.
Another question: Is the updates folder from Office only for servicepacks? or can I put also updates and patches MSP files in here? If yes then i've got a lot of files with the same name and different files sizes. For example After extracting SP1 I've got
the file "proofsp-en-us.msp" which is 10MB and when extracting another patch also i've got a proof-en-us.msp and is 8MB.
So which one need to go in the updates folder?
Can anyone help me out?
thanksHi,
As can be seen from below KB articles, KB2817430 only contains Service Pack 1 (SP1) for Office 2013, whereas KB2850036 also contains Service Pack 1 (SP1) updates for other Office 2013 related desktop products. For example, Microsoft Office 2013
Language Pack, Project 2013, SharePoint Designer 2013, Office Proofing Tools 2013, etc.:
https://support.microsoft.com/en-us/kb/2850036
https://support.microsoft.com/en-us/kb/2817430
So if you have any of these products on your computer, Windows Update might offer related updates to you.
Regarding the Updates folder issue, you can put any Office software updates in it during the initial installation, such as service packs or hotfixes. A newer patch might make changes to a specific file, you can check the version number of that file, and keep
the newer one in the folder.
Here is the reference you will need:
http://blogs.technet.com/b/office_resource_kit/archive/2011/05/05/using-the-updates-folder-to-deploy-software-updates-with-an-office-2010-installation.aspx
(Note, it was created against Office 2010, however the steps should hold good for Office 2013)
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
What are the major differences between BODS and Talend ?
Hi Friends,
We had a client meeting 2 days back regarding BODS project, But our client is showing more interest on Talend. We have explained/demo him on BODS. Could any one please tell me, What are the major differences between BODS and Talend ? What are the features of BODS which are not there in TELEND ?
Thanks,
Bheem.Hi,
If you talk difference than Talend is an open source. SAP DS as huge advantage when it comes to loading data into SAP and it is more flexible with lots of inbuilt features and easy to load data into SAP using DS directly and extracting data from various legacy systems. -
What's the difference between boxing and unboxing?
What's the difference between boxing and unboxing, I'm a bit confused?
Is autoboxing the same as boxing?
This is what I know so far:
-This is boxing, i think:
int []arrayset = {1,2,3};but I don't understand what unboxing is, can someone explain it to me.I did little research, but please correct me ifI'm
wrong:
Is this similiar to unboxing:
System.out.println(intArray[0] + intArray[1] +
intArray[2]);
Only if intArray is declared asInteger[]
intArray ...Then the Integers at intArray[0] etc are unboxedinto
int primitives before adding.Did you try that before you posted it? Autoboxing is
applied only to an individual primitive/wrapper.
Arrays and collections aren't subject to
autoboxing/unboxing. Basically, the compiler will
fill in constructs such as Integer.valueOf() for you,
it doesn't go as far as generating loops and new
arrays for you
OP, as Peter said, the difference between boxing and
unboxing is merely one of direction. Autoboxing wraps
a primitive up for you, auto-unboxing extracts the
primitive from a wrapperAm fully aware of that, the OP's example contained references to array elements but it was not clear whether that array was declared as Integer[] or int[], hence my answer.
And just for the recordInteger[] intArray = new Integer[] {1, 2, 3}; // autoboxing
System.out.println(intArray[1] + intArray[2]); // autounboxing
// while ...
int[] intArray = new int[] {1, 2, 3}; // no boxing
System.out.println(intArray[1] + intArray[2]); // no unboxingis what i meant. -
Differences between MIC and Process control
Hi
Could someone please let me know what are the major differences between MIC and process control 2.5.
I have heard that Process control 2.0 is not being used now.
So could you please let me know what the differences for MIC and Process control 2.5.
Regards
SandhyaHi Sandhya,
the major differences are:
- automated controls (SAP and non-SAP systems)
- UI interface based on NetWeaver Business Client (NWBC)
- flexibility on scheduling assessments and tests based on control attributes
- configurable reports and extraction to either .pdf or .xls
- possibility to se configure workflow to send reminders and escalations
- integration with Access Control 5.3, RAR component
- concept of service providers allowing controls to be referenced between different organizations (former MIC orgunit)
- assessments based on surveys (questions to be answered)
- effectiveness tests based on test plan (both tests and steps)
Regards
Andre Yuji -
What is the difference between CDC and SCD type2
I am a new user of BODS and Have used SCD type 2 (delta's) capturing and loading the difference of data to targets.
Trying to understand the difference between CDC and scd type 2.
CDC says capture changed data, so i assume both are same, is that true?
thanks for the helpful info.CDC is Change Data Capture -
The CDC methods will enable you to extract and load only the new or changed records form the source, rather than loading the entire records from the source. Also called as delta or incremental load.
SCD Type 2 (Slowly Changing Dimension Type 2)
This lets you store/preserve the history of changed records of selected dimensions as per your choice. The transaction table / source table will mostly have only the current value and is used in certain cases where in the history of a certain dimension is required for analysis purpose.
Regards,
Suneer -
Difference between systimestamp and a column of timestamp
Hi ,
I want to get the minutes difference between systimestamp and a column which has value of certain timestamp
Table1
InsertTmstmp --> 03-FEB-10 01.43.07.865272000 AM
now how can I get the difference in minutes between systimestamp - InsertTmstmp ?
I tried the following
select EXTRACT(minute FROM systimestamp - InsertTmstmp ) from table1 where seq_id = '9';
but this was not giving proper results .
For example if InsertTmstmp --> 03-FEB-10 01.43.07.865272000 AM
and systimestamp is 03-FEB-10 02.03.15.678084000 AM GMT-07:00. then the select query is returning 50.
and when I query
select systimestamp - InsertTmstmp from table1 ,, this is not returning any value . ( i saw in some sites this query returning values ).
Thanks in advanceMay be like this?
with t
as
select systimestamp - (systimestamp-1) dt from dual
select dt,
extract(day from dt)*24*60+extract(hour from dt)*60+extract(minute from dt)+extract(second from dt)/60 interval_in_min
from t -
HI experts can u tell me the difference between LIS AND LOCOCKCPIT ext ?
hi experts iam in learning stage ,so plz can some one tell me the differece between LIS and LO COCKPIT extractions and various steps invovlved in them , sorry for being pain in the back i did search in the previous posting didnt find the right answer . cheers thanks
Hi,
LO **** pit
-->BW CONTENT EXTRACTOR......
---> it uses Readymadely available datasorce
--->LO cockpit supports V3 update(BACK GROUND SCHEDULING Jobs)
LIS
---> CUSTOMER GENERATED EXTRACTOR.
> need to cretae everything...
--->LIS does't supports V3 update mode... it supports only V1 (SYNCHRONUS)& V2(ASYNCHRONUS UPDATE)
check these links:
Difference B/n LOCOCKPIT &LIS
differences between LO and LIS
Differences between LIS,LO,CO/PA and FI-SL extractors
Difference between LIS and LO Cockpi interma of table?
difference between LIS and LO Setup run
LIS and LO Cockpit
hope it helps...............
Regards
chandra sekhar
Edited by: chandra sekhar on Dec 16, 2008 2:01 PM -
Difference between reconstruct and reload?
Hi All,
1.What is difference between reconstruct and reload?
2.User exits for variables? Examples.
3.Your delta failed from R/3. No records in extraction queue and delta queue. How would you get those records?
4.ODS has 5 requests? If bottom request is removed would top request be affected?
5.Web application developer experience. Did you work on BPS?
6.Experience working with Info Hub?
thanks,
deen> Hi All,
>
> 1.What is difference between reconstruct and reload?
> 2.User exits for variables? Examples.
> 3.Your delta failed from R/3. No records in
> extraction queue and delta queue. How would you get
> those records?
> 4.ODS has 5 requests? If bottom request is removed
> would top request be affected?
> 5.Web application developer experience. Did you work
> on BPS?
> 6.Experience working with Info Hub?
>
> thanks,
> deen
hi,
reconstruction: means we get same request data from PSA to data target.
reload: reload means again the data is loaded with new request number.
your 3rd quesition is not clear
2 ans.For variable with customer exit we have one enhancement that is RSR00001.If u want to populate data to u r variable dynamically then we gofor this exit.We can do this in CMOD transactin code.
3 ans.yes there is effect.the top request are deleted. -
Difference between interface and conversion
could you give me the difference between interface and conversion
hi
<b>Conversion,</b> converting legacy system data into SAP data. Meaning that it is mainly a one shot deal, for example bringing your customer master to SAP from the legacy system, converting the fields used in legacy to the fields and values used in SAP.
<b>Interface,</b> a program or group of programs that handle the passing of data from one system to another. These programs work together to export the data from one system and import into a target system, maybe these programs run once a day, maybe twice, may every hour throughout the day. It is a good way to keep the data in two or more systems in sync with each other.
Interface programs are also data extract program. Data is extracted from SAP into a flat file and transferred to other external systems like UNIX, mainframe.
In data extracts, the file layout is designed and this layout should be in synch with other external systems.
<b>reward poins for useful ans</b>
Regards
Aarti -
Difference between 0PM_OM_OPA_1 and 0PM_PRM_PLCS_1
Hello,
Can you pls provide me information about difference between 0PM_OM_OPA_1 and 0PM_PRM_PLCS_1 data sources?
Both of them extract plan data.
Regards,
RomanoHi,
0PM_PRM_PLCS_1 - This DataSource is used to load the movement data for maintenance planned costs.
Prerequisites
Configure the desired extraction parameters in the TPM_C05 Customizing table (transaction SM30).
Parameters for the Costing of Maintenance Task Lists
· Reference date for the costing
· Order type for the costing
· Package size for the internal subdivision of the extraction
Parameters for the Costing of Maintenance Plans
· Reference time for the costing
· Package size for the internal subdivision of the extraction
whereas Only full upload for DataSource 0PM_OM_OPA_1
-Vikram
Maybe you are looking for
-
Adobe form-Able to post data using Adobe Reader 9 but not with Adobe Proff
Hello Guru's I am facing one problem with adobe forms. We have develoed a adobe form using adobe reader 9. Now when user are posting the purchase requistion using the form,they are able to post the data using Adobe Reader 9 but not with Adobe Reader
-
New Iphone4 Shows Preview of Texts and Chats
Everytime I get a text or chat, it shows on the screen as a preview. I have the passcode on and have turned off the notifications. Is there a setting or an app to download that prevents them from automatically showing up or a way to block them so I c
-
Identifing incoming callers in my address book
I have my address book updated, but incoming calls from people already existing in my address book are not identified automatically. How can I change this? Thanks in advance.
-
I have 1.03GB photos, 135 MB Apps (5), 122.8 MB documents and data, 14.4 MB songs, 11.52 GB "other", 120.9 MB "over capacity" How can I delete it?
-
Is there an adapter that will charge my 3g while I'm connected with USB2.0?
My 3rd generation iPod, like many others here, no longer connects via firewire- even after trying every trick mentioned here AND switching cables, computers etc. I realize that the 3g cannot charge via USB2.0 AND will rapidly discharge when connected