Difference between M9321G/A and M9321G/B adapters ?

Hey,
I just got a new iMac 20" (the 2.66 GHz mode, part # MB324LL/A) and I'm planning on connecting a 17" Dell monitor (1704FP). I went down to the local Apple dealer to get the required Mini-DVI to DVI Adapter. The product they sold me was part # M9321G/A. According to the Apple specifications page for the new iMacs, the adapter required is part # M9321G/B.
I did a quick web-search to find out the difference between these adapters but all I can find out is that the M9321G/A has been superseded by the M9321G/B.
Are there any technical differences between these parts? Will the older adapter still work just fine with the new iMac?
Finally, should I be worried that the Apple store sold me superseded stock? In their defence, I know that they just got it in stock themselves as I went in earlier in the week and they had them "on order" and they only arrived today.
Cheers,
David
Perth, Australia

For anyone who was curious, the Mini-DVI to DVI Adapter part # MB324LL/A appears to work fine with the new iMacs. I still do not know how this adapter differs from the Apple recommended Mini-DVI to DVI Adapter (part # MB324LL/B).
Cheers,
David
Perth, Australia

Similar Messages

Difference between Seeburger FTP and OFTP adapters

hi,
Can anybody tell me the difference between Seeburger FTP and OFTP adapters?
On what basis should one make a business decision as to which adapter to go for?
Kindly help urgently.
Regards,
Loveena

Hi ! Loveena
Seeburger EDI Adapter provides an EDI solution on internet via HTTP or AS2 to replace the expensive VAN. It provides some pre-built mappings for IDOC to ANSI X12(810,850,855,856 etc.,) and Idoc to EDIFACT(ORDERS,DESADV,INVOIC etc.,) and has the ability to build your own. These pre-defined mappings transform the IDOC-XML to EDI-XML format.
Seeburger Adapters are used to Connect the applications which are using Message protocol/Transport protocol as CrossIndustry(payment), VAN, OFTP, AS2(EDIINT), Generic and EDI based applications.
Re: Seeburger Adapter
Reg seeburger seeburger
installation
https://forums.sdn.sap.com/click.jspa?searchID=2268965&messageID=3210111
OFTP ist a communication protocol. This has nothing to do with the format you have to transfer.
regards the format you have to clear at which standard you have to transfer the messages. This can be any EDI format. At OFTP area the standard are often VDA or ODETTE.
You can create this messages using different EDI adapters (of course also the mendelson adapter ).
Regards OFTP you need additional software which handle the transfer based on the OFTP standard. Mostly you also need an ISDN card for using this protocol.
We can support you with this software for OFTP transport too.
More info also available at http://www.mendelson-e-c.com/.
have a look at the ACTIS OFTP Adapter
Ref: http://www.actis.atosorigin.de/solutions/en/ACTIS_solutions/SAPXI.php
refer this thread also
When we need Seeburger AS2 & FTP?
XI Seeburger adapters
Adapter for OFTP?!
Thanks !!

What are all difference between 11g Mediator and 10g Oracle service bus.

hi all ,
Apart from SCA concept , storing location
is thr any other difference between 11g Mediator and 10g Oracle service bus ?
thx in advance..

11g introduces the SCA architecture for building the service infrastructure.
SOA 11g uses:-
1. Uses the weblogic Server and BEA Aqualogic Service Bus (ALSB) for the Oracle Service Bus.
2. BPEL uses scalable DOM with reduced memory usage.
3. New adapters and leverage for Java 2 Connector Architecture (J2CA)
4. BAM finally ported from .Net to J2EE and is part of the service infrastructure
5. Oracle Web Services Management built into SOA 11g service infrastructure
6. New adapters and leverage for Java 2 Connector Architecture (J2CA). Tighter integration with E-Business Suite & large payload support.
7. Business Rules in SOA 10g business rules are managed using the Rules Author & in SOA 11g business rules are managed using JDeveloper and SOA composer

Difference between HTTP adapter and SOAP adapter

Hi All,
Can any one tell me abt what is the main difference between HTTP adapter and SOAP adapter.when we'll use these eactly?
Thanks
pullarao.

Hi Rao,
Please go through the below links to understand it:
https://www.sdn.sap.com/sdn/weblogs.sdn?blog=/pub/wlg/1442 [original link is broken] [original link is broken] [original link is broken] [original link is broken]
More links for SOAP Adapter:
/people/siva.maranani/blog/2005/09/03/invoke-webservices-using-sapxi
http://help.sap.com/saphelp_nw04/helpdata/en/9f/fdca3f01f33e1ce10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/69/a6fb3fea9df028e10000000a1550b0/frameset.htm
More links on HTTP adapters.
/people/siva.maranani/blog/2005/09/15/push-data-to-mvc-architectured-application-using-xi
/people/prasadbabu.nemalikanti3/blog/2006/02/27/collecting-and-bundling-vendor-records-from-different-multiple-interfaces-file-systempeoplesoft-and-sending-to-sap-r3-system-part-2
Regards,
Subhasha

Difference between File adapter and FTP adapter

hi,
I would like to know what is the difference between File adapter and FTP adapter
thanks
Yatan

Both file and ftp adapters are non-concurrent jca adaps, however we go for file adapters mostly when you have files on your local environment and do not need to wait for someone to FTP the files on a timely basis. In case of FTP Adapter, we would need an FTP Server, a remote location with access where in files pitch in for polling.
Also, File adapter is dependent on the local folder and OS, however FTP adapter is dependent on the local as well as the remote file system/OS/folder permissions/user access.

Difference between WCF-NetTCP and TCP/IP adapter

What is the difference between WCF-NetTCP and TCP/IP adapter ?
Are both work in the same way or there is any similarity in their working ?
Prakash

Hi Ashwin,
Yes,I am referring to Codeplex based community adapterhttp://tcpipbz2010.codeplex.com/ for TCP/IP
adapter.
As from your reply ,both adapters can perform the same task .Right ?
Actually I am using socket programming to connect TCP/IP adapter.
Can I do this with WCF-NetTCP adapter ?
Prakash

Differences between SOAP Adapter and WS Adapter

Hi Experts,
In order to consume a service in SAP ECC by SAP PI 7.1, I´m using a service based on RFC. I tryed sucessfully to do that using SOAP Adapter and WS Adapter.
What are the differences between using a receiver communication channel with SOAP adapter or WS adapter? Which is the better way ?
Tks in advance.

Hi,
Please go through the below URLs for a discussion of SOAP and WS adapters:
The difference between SOAP adapter and WS adapter in PI 7.1
WS adapter vs. SOAP adapter
Regards,
Rajeev Gupta
Edited by: RAJEEV GUPTA on Jan 9, 2009 3:41 PM

What is difference between sy-tabix and sy-index.

SAP Seniors,
Can you please let me know what is difference between sy-index and sy-tabix.
I read the SAP help, it is confusing for me. it looks like both are same from help. please help me.
Thank you
Anitha.

HI,
Here is a brief description of difference between SY_TABIX and SY_INDEX and using them with several conditions.
SY-TABIX
Current line of an internal table. SY-TABIX is set by the statements below, but only for index tables. The field is either not set or is set to 0 for hashed tables.
APPEND sets SY-TABIX to the index of the last line of the table, that is, it contains the overall number of entries in the table.
COLLECT sets SY-TABIX to the index of the existing or inserted line in the table. If the table has the type HASHED TABLE, SY-TABIX is set to 0.
LOOP AT sets SY-TABIX to the index of the current line at the beginning of each loop lass. At the end of the loop, SY-TABIX is reset to the value that it had before entering the loop. It is set to 0 if the table has the type HASHED TABLE.
READ TABLE sets SY-TABIX to the index of the table line read. If you use a binary search, and the system does not find a line, SY-TABIX contains the total number of lines, or one more than the total number of lines. SY-INDEX is undefined if a linear search fails to return an entry.
SEARCH <itab> FOR sets SY-TABIX to the index of the table line in which the search string is found.
SY-INDEX
In a DO or WHILE loop, SY-INDEX contains the number of loop passes including the current pass.
Hope this helps.
Thank you,
Pavan.

Difference between sy-tabix and sy-index?

tell me about sy-tabix and sy-index?what is the difference between sy-tabix and sy-index?
Moderator Message: Please search before posting. Read the [Forum Rules Of Engagement |https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement] for further details.
Edited by: Suhas Saha on Jun 18, 2011 5:33 PM

HI,
Here is a brief description of difference between SY_TABIX and SY_INDEX and using them with several conditions.
SY-TABIX
Current line of an internal table. SY-TABIX is set by the statements below, but only for index tables. The field is either not set or is set to 0 for hashed tables.
APPEND sets SY-TABIX to the index of the last line of the table, that is, it contains the overall number of entries in the table.
COLLECT sets SY-TABIX to the index of the existing or inserted line in the table. If the table has the type HASHED TABLE, SY-TABIX is set to 0.
LOOP AT sets SY-TABIX to the index of the current line at the beginning of each loop lass. At the end of the loop, SY-TABIX is reset to the value that it had before entering the loop. It is set to 0 if the table has the type HASHED TABLE.
READ TABLE sets SY-TABIX to the index of the table line read. If you use a binary search, and the system does not find a line, SY-TABIX contains the total number of lines, or one more than the total number of lines. SY-INDEX is undefined if a linear search fails to return an entry.
SEARCH <itab> FOR sets SY-TABIX to the index of the table line in which the search string is found.
SY-INDEX
In a DO or WHILE loop, SY-INDEX contains the number of loop passes including the current pass.
Hope this helps.
Thank you,
Pavan.

What is difference between sy-index and sy-tabix and where both are using ?

what is difference between sy-index and sy-tabix and where both are using ?

hi nagaraju
sy-tabix is in Internal table, current line index. So it can only be used while looping at the internal table.
sy-index is in Loops, number of current pass. This you can use in other loop statements also (like do-enddo loop, while-endwhile)
SY-INDEX is a counter for following loops: do...enddo, while..endwhile
SY-TABIX is a counter for LOOP...ENDLOOP, READ TABLE...
Here is an example from which you can understand the difference between sy-tabix and sy-index.
Itab is an internal table with the following data in it.
id Name
198 XYZ
475 ABC
545 PQR.
loop at itab where id > 300.
write :/ itab-id, itab-name , sy-tabix, sy-index.
endloop.
My output will be :
475 ABC 2 1
545 PQR 3 2
Sy-tabix is the index of the record in internal table.
sy-index gives the no of times of loop passes.
So, for the first record in the output (475 ABC), 2 is the index of the record in internal table and as it is first time loop pass occured, sy-index value is 1.
Regards,
navjot
award points

The difference between chapter markers and dvd studio pro markers

Does anyone know what is the difference between chapter markers and dvd studio pro markers? I can not find anywhere on Google. Also in the tutorials I have seen, suggesting DVD Studio Pro markers, but it did not mention the chapter markers.
Thanks,

"Adding Chapter and Compression Markers to Your Sequence
Once you have your edited sequence or program finished, you can add markers to the sequence for use on DVD. Markers are reference points you can place within clips or sequences that identify specific frames. There are two kinds of markers you can add that directly relate to authoring a DVD—chapter markers and compression markers.
• Chapter markers allow DVD authoring applications to create a navigable chapter list for your exported QuickTime movie. Chapter markers force MPEG keyframes (known as I-frames) at their location, since the DVD specification requires an I-frame at each chapter point.
• Compression markers identify areas of abrupt change and include two types: those that are automatically inserted by Final Cut Pro at all edit points, and those you manually place in the clip or sequence. Like chapter markers, compression markers force I-frames at their location, although in this case it is for better quality encoding, and they are not used to create a chapter list.
Note: When you export a QuickTime movie, you have an option to export various kinds of markers, including compression, chapter, or DVD Studio Pro markers. *When you choose to export DVD Studio Pro markers, Final Cut Pro actually exports chapter markers and all compression markers.* This includes compression markers you set manually, as well as ones created automatically by Final Cut Pro at edit and transition points."
From the Final Cut Pro User Manual.
So, JS was right the first time

The difference between an iphone and an ipod touch?

i want to know if the difference between an iphone and an ipod touch is just that the iphone is like a phone that has internet and is a phone. or what else is it?

The iPhone includes the same as an iPod Touch but also includes a phone, a camera, and a GPS radio.
In addition to having internet access via wi-fi, the iPhone also has internet access via the cellular network, so as long as you have cellular reception with the iPhone, you have access to the internet in addition to having access via an available wi-fi network.

The difference between system restore and last good known configuration

hi,
what is the difference between system restore and last good known configuration.
in which situation you use system restore ,and in which situation you use last good known configuration.
very short answer wil be enough.
thanks
johan
h.david

Last Known Good Configuration deals only with Starting Windows eg. a bad registry or incorrect driver is preventing Windows to start.It recovers the registry settings of HKEY_LOCAL_MACHINE\System\CurrentControlSet
While System Restore uses restore points to return your system files and settings to an earlier point in time without affecting personal files. Restore points are created automatically every week, and just before significant system events, such as the installation
of a program or device driver. You can also create a restore point manually.You can undone system restore but there is no such option in Last Known Good Configuration.
Last Known Good Configuration is disabled in Windows 8 or,Windows 8.1 by default.
Try using Last Known Good Configuration if you can't start Windows, but it started correctly the last time you turned on the computer.
Try using System Restore to return the system to an earlier point in time when things worked correctly.
S.Sengupta, Windows Entertainment and Connected Home MVP

Difference between sy-datum and any given date

Dear Friends;
I have one query regarding DATE I wanna calculate the difference between
SY-DATUM and ANY GIVEN DATE . Is there any function or code available that take one parameter as sy-datum and another parameter as any given date and give result as no. of days between them
Regards;
Parag

DATA: DATEDIFF TYPE P.
CALL FUNCTION 'SD_DATETIME_DIFFERENCE'
EXPORTING
    date1                 = '20071122'
    time1                 = '000001'
    date2                 = '20070905'
    time2                 = '000001'
IMPORTING
   DATEDIFF               = DATEDIFF
EXCEPTIONS
   INVALID_DATETIME       = 1
   OTHERS                 = 2.
Greetings,
Blag.

Difference between sy-uline and uline

Hi All,
Any one of you please update me what is the difference between sy-uline and uline. Also when i give sy-uline in top-of-page event it gives error.
Thanks
sankar

with ULINE u can specify the position from where the ULINE should start
corresponds to WRITE AT 3(10) SY-ULINE.
ULINE AT 3(10) NO-GAP will supress the spacess after the under line
ex : 1
uline at 4(10).
write : / 'My Program'.
uline at 4(10).
ex : 2
write : 'My Program' , sy-uline.

Difference between sy-datum and sy-datlo

difference between sy-datum and sy-datlo

hi,
The GET TIME statement synchronizes the time on the application server with the time on the database server and writes it to the field SY-UZEIT. SY-DATUM and the system fields for the local timezone (SY-TIMLO, SY-DATLO, and SY-ZONLO) are also reset.
SY-DATLO
Users local date, for example 19981129, 19990628,
SY-DATUM
Current application server date, for example 19981130, 19990627,
SY-DAYST
X during summertime, otherwise space.
SY-FDAYW
Factory calendar day of the week: Monday = 1 Friday = 5.
SY-TIMLO
Users local time, for example 154353, 225312,
SY-TZONE
Time difference in seconds between local time and Greenwich Mean Time (UTC), for example,
360, 10800.
SY-UZEIT
Current application server time. for example 164353, 215312,
SY-ZONLO
Users time zone, for example, EST, UTC,
reward points if useful

Difference between M9321G/A and M9321G/B adapters ?

Similar Messages

Maybe you are looking for