Difference between mac pro early 2008 and 2008

What is the difference between mac pro early 2008 and 2008? There are specs warning me it won't work on early 2008 but it will on 2008 models when I'm looking for components to buy. Is this true?

Not true.
There is 3,1, there was nothing else.
you can pull up Apple Support Mac Pro specs easy enough and tell by RAM speed and other items - or go to Everymac.com even.
All we need and what you could have done is taken the top line of System Profile that tells the model.

Similar Messages

  • Difference between Mac Pro and Mac XServer

    Hi,
    I wanted to know if there is any difference between Mac Pro and the Mac XServer - at the OS level? Meaning, if I design an application on Mac Pro would it run seamlessly on XServer or do I need to care about a few things.
    Please advise.
    Thanks,
    Abhishek

    Both Mac OS X and Mac OS X Server are presently at the Tiger 10.4.10 release, with Mac OS X Server having various added pieces and features, and having a few structural and configuration differences.
    * Do both of them support the ipv6 protocol
    Yes; both Mac OS X and Mac OS X Server both offer IPv6.
    * do both of them support LDAP and PAM based authentication
    Mac OS X and Mac OS X Server have LDAP support, yes. Mac OS X Server has LDAP authentication, DNS and a variety of other servers built in. Mac OS X is configured as a client, though there is the Apache web server.
    Haven't looked for PAM for either platform.
    * Do both of them support the same level of Java ( I understand we need 1.5 or higher for Tiger / Leapord)
    Java itself is the same on both Mac OS X and Mac OS X Server, though Mac OS X Server has server-oriented pieces of Java present. And it's still write once, debug everywhere.
    No Leopard questions are permissible here at this time; Leopard details are NDA.
    * Do the compilers (gcc) have different compilation options - maybe xServer uses some better optimized flags that handle large volumes of data and network traffic.
    AFAIK, there are no differences in gcc defaults. Nor would I expect any. Handling volumes of data is left to the programmer. (I'm not even sure how a compiler author would even implement that sort of difference.)
    * Is there any difference in the behavior of the way the libraries ...
    I'd expect the exact same behavior the programmer requested would occur with both platforms.
    Now as for what I expect is the root of your question, yes, you'll likely want to test your application on both Mac OS X and Mac OS X Server software platforms. There can exist very hard to predict details such as cases where dual NICs or the aforementioned directory differences that have tossed a few applications off the rails and into the weeds; have caused applications to fail.
    You can choose to install Mac OS X Server on a Mac Pro. Probably the 10-client, because you probably aren't planning to serve piles of clients from the Mac Pro.
    An overview of Mac OS X Server is here:
    http://www.apple.com/server/macosx/specs.html
    Now as to whether or not I would expect run-time differences, no. But I've been at this way too long and have chased way to many weird bugs to make any promises here.

  • Does anybody knows what is the difference between MacBook Pro MC723LL/A and MC723RS/A?

    Does anybody knows what is the difference between MacBook Pro MC723LL/A and MC723RS/A?

    evghenii wrote:
    Does anybody knows what is the difference between MacBook Pro MC723LL/A and MC723RS/A?
    No difference other than one is for the Russian market. Specs on both are the same, standard Apple Store issue versions.
    Of course the screen choice of anti-glare, glossy, high res or low res is not included.
    The default is likely the cheap glossy and low res.
    MC723LL/A  - 2.2Ghz MacBook Pro (15" Early 2011) $2,199
    Display 13,3'' Dual-Core i5 2.3GHz/4GB/320GB/HD Graphics/SD, Russian (MC700RS/A)
    Display 13,3'' Dual-Core i7 2.7GHz/4GB/500GB/HD Graphics/SD, Russian (MC724RS/A)
    Display 15.4" Quad-Core i7 2.0GHz/4GB/500GB/HD Graphics/Radeon HD 6490M/SD, Russian (MC721RS/A)
    Display 15.4" Quad-Core i7 2.2GHz/4GB/750GB/HD Graphics/Radeon HD 6490M/SD, Russian (MC723RS/A)
    Display 17'' Quad-Core i7 2.2GHz/4GB/750GB/HD Graphics/Radeon HD 6750M/SD, Russian (MC725RS/A)

  • HT1604 Is there any difference between Mac OS Extended Format and ExFat?

    Is there any difference between Mac OS Extended Format and ExFat?  I read in a blog that the ExFat was a good way to format an external drive because it avoided many of the pitfalls of the other formats, as long as it is supported by the operating system.  I tried to format my new Seagate drive, and got an invalid option error.  I was able to format it in Mac OS Extended format.  Can you please tell me if this is similar to ExFat.  Thanks.

    The Mac OS format can only be natively read to and written to by a computer running the Mac OS. This creates a problem if the user wishes his external, or other drive to have seamless compatibility between two different OS's, such as Windows and Mac. Yes, there are software solutions that enable a Windows PC to work with a drive formatted as Mac OS, but it gets complicated if you wish that drive to have compatibility "on the fly" with any PC you may encounter.
    It turns out that the format known as ExFAT is able to be natively read by both a Mac and a PC, without running any additional drivers on either machine. ExFAT also doesn't have some of the limitations of FAT32, which both OS's will also read/write.
    ExFAt is not perfect though. Formatting the drive as Mac OS Extended has some advantages on a Mac. First, it is the only format that permits all functionality of the Mac OS, such as using the drive for Time Machine.
    ExFAt is often thought of as the best middleground for an external partition/drive that needs to have easy cross platform compatibility between a Mac and  PC running Vista or Windows 7.

  • What is the difference between macbook pro ME865B/A and ME865AE/A

    what is the difference between macbook pro ME865B/A and ME865AE/A   ???

    The first model was originally sold in the UK or Ireland, while the second came from a different country, probably one in the Middle East. They're operationally identical.
    (114451)

  • Difference Between MacBook pro MD103LL/A and MacBook Pro MD103ZA/A

    My Questions is that:
    What is the Specs or technical Difference Between MacBook pro MD103LL/A and MacBook Pro MD103ZA/A ? both Have i7 , NVidia 650 GT M, 500 HDD and other almost same specs I am confused which on should I buy ???

    Muhammad Azim wrote:
    Technically both are same right ?
    yes. that is correct.

  • Where is the difference between MacBook Pro ME294D/A and ME294B/A  and ME294Z/A?

    Where is the difference between MacBook Pro ME294D/A and ME294B/A  and ME294Z/A?

    The country the computers originally shipped in.
    (98433)

  • Mac pro early 2008 migration to mac pro mid 2010

    I have a mac pro early 08 and am trying to migrate all of this to my newish mac pro mid 10 and am finding it difficult to do, i have basic progs on mac pro 10 and maverick installed and thats it, but am unable to find how to get all my 'stuff' from one to other. help

    I'll watch to see if you get an answer. I have a late 2008 Mac Book Pro 15 with the same problem. It boots xp good every time. But I often need to use external monitor to gain control of the OSX boot. It gives tone, shows gray, shows apple and gear the short blue and then strait to black and front LED seems to indicate sleep. Very frustrating. Happens on both use best graphics and conserve battery display settings. Tried the reset pram, safe boot, save boot verbose. All no good.

  • Difference between Satellite Pro L300 and Pro A300

    Can anyone please tell me the difference between the Pro A300-21F and the Pro L300-1RS as the specs on the Tosh pages appear to be identical.
    As we all are, I am seeking the most powerful machine at the lowest cost. Tks

    _Satellite Pro A300-21F:_
    - Intel(R) Pentium(R) Dual Core processor T3400
    - 160GB (5400RPM) SATA
    - Mobile INTEL GL40 graphic chip
    - 2GB DDR2 (800MHZ)
    - No Bluetooth
    - No fingerprint sensor
    _Satellite Pro L300-1RS_
    - Intel(R) Pentium(R) Dual Core processor T3200 or Intel(R) Pentium(R) Dual Core processor T3400
    - 160GB (5400RPM) SATA
    - Mobile INTEL GL40 graphic chip
    - No Bluetooth
    - No fingerprint sensor
    - TV-Out (Composit) port and External monitor RGB port available
    You are right, both notebooks models seems to be very similar and supports nearly the same devices.
    Bye

  • What is the difference between Macbook Pro late 2008 & early 2009 ???

    I just bought a Macbook Pro on 1/1/09. I'm assuming I got a Late 2008. What is the difference between Macbook Pro late 2008 & early 2009 ???
    -Rany

    The "late 2008" macbook pro refers to the new 15 inch MBP currently out, and the early 2009 refers to it's big brother, the 17 inch which is due to come out in the near future.

  • MAC PRO (Early 2008) RAID CARD ISSUE - SYSTEM FREEZEHello (hopefully someone can shed some light on my issue)  I own as above a MAC PRO (Early 2008) this has a RAID card installed along with two 15k.7 cheetah hdd (320gb) and a spare drive, (which i m

    Hello (hopefully someone can shed some light on my issue)
    I own as above a MAC PRO (Early 2008) this has a RAID card installed along with two 15k.7 cheetah hdd (320gb) and a spare drive, (which i made a regular drive)
    a while ago i had to replace the RAID card battery, so i did this, over a year later the same thing happened again, but as previous just left it and the system seemed fine for ages, until last night i was working in PHOTOSHOP and everything just froze and the screen kind of appeared GREEN, could not do a single thing. So restarted the mac, this time grey screen for ages and a message appeared, (macs version of blue screen) (see attached).
    I restarted the machine and this time a flashing question mark folder!
    could not do a thing.
    so i found my copy of snow leopard and got the computer to run this and at least launch the DISK UTILITY and (Interestingly in the drop down menu RAID UTILITY was also in the menu) but it did not matter which utility i used the (RAID or DISK) neither could see any of drives, just the dvd drive.
    so looked around on you tube and various forums and discovered if i take out the RAID CARD and re-plug the main lead from the RAID card back in to the LOGIC BOARD I would be reverting the MAC to a normal regular non-RAID computer.
    After performing this HARDWARE task and inserting all three HDD, and running the DISK utility from the drop down menu via the SNOW LEOPARD disc.
    (interestingly since the RAID card had been removed the RAID UTILITY  from the drop down menu no longer appeared). running disk utility I can now only see the regular (spare) hdd and DVD Drive, but the two RAID HDD , again, still do not show up DISK UTILITY?
    O.K. so i could chuck out the RAID card (AND RAID HDD) and just go with a regular set-up, and run a back restore from Time Machine on a NEW hdd purchased.
    but what is wrong with the RAID, is the card at fault or are both HDD used for the RAID knackered? can i perform any tests, to see whats what?
    thanks for your help in advanced.

    hello people, the issue was in fact the GRAPHICS card nothing to do with the HDD or RAID system ( although this did cause issues with the RAID system it basically lost its way) below is my replay to another similar  problem some one else had!
    working in photoshop and then everything stopped working and the lot froze! only option was to force shutdown (via button).
    and try to restart, hoping all was fine, this was not the case :-(
    I had the added issue of the RAID card system, that i have, this was confused to say the lease and would not behave or work, causing the start up to hang.
    so i thought the HDD must be bust and the root cause. ( but soon learnt it was not the cause )
    ...bought a new HDD removed the RAID card and replugged the cable from RAID card into LOGIC board, ( making the computer act like any normal non-RAID system). I managed to install the OSX, using the snow leopard disk way. once the mac was running, i started to notice the screen would flicker and started to see 'artefacts'. so i started to reveal my symptoms to the web and forums and soon discovered that my graphics card could be the issue all along?.
    (nvidia geforce 8800gt 2x dvi).
    I read up on that a fix, could be either A. reply the thermal paste, as the card could be over heating or B. stick the card in the oven trick.
    Tried option A. first and nothing still issues, so last night took the plunge carried out option B. and ta da it worked! i even managed to run
    from my new HDD my lasted install OS X, absolutely fine. I then thought, maybe i could repair my RAID so replugged all the HARDWARD back in and
    carried out a disk repair and disk permissions on drives( took a small amount of time), via the SNOW LEOPARD disc - (Disk utilities) and this worked and now have my system working as it was just over 6 days ago.
    what was the cost to get this?  bought a new hdd so 40.00gbp and thermal paste and cleaner kit ( your still need to do this ) search video card trick on you tube.
    and renew thermal paste, approx 15.00gbp, technically i don't need the new HDD, but it was all part of the trial and error way i went. ( i do have extra storage as a result!)"

  • Hello. My mac pro early 2008 restarts after sleep mode and it works slower. I tested it with apple hardwear test and it seems to be ok. Thank you.

    Hello. My mac pro early 2008 restarts after sleep mode and it works slower. I tested it with apple hardwear test and it seems to be ok. Thank you.

    Try this:
    clone your system and repair it with Disk Warrior instead
    Or try a clean test system install on another drive
    A must: SmcFanControl 2.2 - a mere 400 rpm extra to keep air cooling up
    Try to run w/o externals. MyBook included.
    Is that a 7200.11 1TB? they had a lot of issues.
    Run AHT off your OEM DVD.
    2008 had to have EFI and SMC updates to deal with freezes on wake from sleep, and like all models, high inrush current.  Hopefully you have a UPS and is 1500VA unit.
    When you do hard restart from power button, you almost certainly add more directory errors and to files requiring immediate attention to repair and rebuild the directory; and to scan and repair and delete cache and temp files and folders. A must. Invest in bootable backups SuperDuper along with Disk Warrior (or TechTool Pro 6, maybe Drive Genius 3 but I'd rate that #3).
    TimeMachine has its own bad habits, especially with Green drives and some externals.
    Try to rule out everything and then add back one at a time.
    And it may just be time to replace the 8800, very common, a couple threads this week, and it is 3 yrs old.  Might want ATI 5870 or 5770.

  • Mac Pro (Early 2008) and HP LP3065 30" display compatibility issue

    Hello!
    Is there FIX / Workaround to Mac Pro (Early 2008) and HP LP3065 30" display compatibility issue ? ( +w/ ATI Radeon HD 2600 XT display adapter+ ). Its really annoying problem :-/.
    Main problem is when i start my Mac, my 30" HP screen dosen't wake up, it always on suspend mode. Sometimes it wakes up on the 3rd try orso, sometimes it ruins my motivation, ideas and i give up (talk about inspiration killer). If i connect PC Laptop to that screen, sreen wakes up straight away. ATI says display adapters "drivers" are included on the OSX install. Great. Weird thing is i didn't recognize this problem at all 6-8 months ago, so i thought my system is fine. So i can't return my HP screen anymore.
    My choices are to buy another 30" screen or buy different display adapter; there's two choices atm i think;
    *-ATI Radeon HD 3870 512MB PCI-E for Mac Pro (~200€)*
    *-EVGA GeForce GTX 285 Mac Edition 1GB (~500€)* (this one has seperate OSX drivers).
    _Can anyone confirm if those display adapters work with HP 3065 30" screen ?._
    http://forums.macrumors.com/showthread.php?t=687624
    http://discussions.apple.com/message.jspa?messageID=9388978
    http://discussions.apple.com/thread.jspa?threadID=1794155&tstart=60
    Br,
    Petri

    Thanks for all information. I haven't been Mac user very long . I just want to get rid of my annoying problem. I'll do music composing mainly on my Mac Pro. So, it dosen't really matter what display card i'm using, i want to just make sure it works with HP 3065 .

  • AirDrop transfer between Mac mini (late 2012) and MacBook Pro (late 2008) works only one way.

    AirDrop transfer between Mac mini (late 2012) and MacBook Pro (late 2008) works only one way.  I see both machines on both airdrop windows. Firewalls on both machines are set exactly the same way, and with Network Browser set to allow.  Can send a file from Mac mini to MacBook, but not the other way.  Never get a window asking to accept on the Mac mini.
    Found no useful documentation on AirDrop anywhere in the whole support site.

    Maybe this will work. From an Apple support article.
    You can also use the Share button to send files to your neighbors via AirDrop. In a Finder window, select the item you want to share, and then click the Share button in the toolbar. For more information about the Share button, see this help topic:

  • Mac Pro early 2008 2 x 2.8GHz Quad Core 10.7.5, replaced 4 x 500ghds with 4 x 3Tb and Raid card Raid5 them OK but can not load time machine back up as it does not see any of the 4 drives, neither does disc utilities, any thoughts?

    On my Mac Pro, early 2008 2 x 2.8GHz Quad Core 10.7.5, replaced 4 x 500ghds with 4 x 3Tb. The Raid card Raid 5ed them OK but can not load time machine back up as it does not see any of the 4 drives, neither does disc utilities, any thoughts?

    You don't see drives when using a hardware RAID only the volumes.
    WD Green are not suitable for hardware RAID (or software RAID for that matter).
    USB2 and TimeMachine are a disaster waiting to happen. I've used SATA (internal) and eSATA (using SATA PCIe cards) trouble-free.
    I can't say I begin to understand your use or "choosing the install drive for the backup"
    Install what?
    You don't load TimeMachine. Maybe seems minor but that is not how to describe the behavior of software.
    You read FAQ and How To http://www.apple.com/support/timemachine
    Time Machine’s Gory Details:
    https://www.apple.com/support/timemachine/
    TimeMachine 101
    https://support.apple.com/kb/HT1427
    Lion Recovry & TimeMachine
    http://www.apple.com/support/lion/installrecovery/
    http://www.apple.com/support/lion/
    How To Restore Your System
    http://pondini.org/TM/14.htmlMac OS X v10.7 Lion
    Pondini's Blog: Time Machine - Troubleshooting -- B5.  Would you like to inherit (or re-use) the backup . . . ?

Maybe you are looking for

  • TS4345 Can I use Migration Assistant to get info from a Macbook Pro that has a dead screen?

    I have a MacBook Pro 17 that the screen died on. I have a new MacBook Pro coming tomorrow and need to try to find a way to get the info from the old one to the new one. From the online info I saw on Migration Assist you need both screens to work to g

  • HUB 4 flashing green, no broadband

    Hi What does flashing green mean?, it will not reset to orange, BT india say there may be a line fault and will monitor for 24 hours, now they say an engineer wil call thursday PM, but will charge if it is my fault.

  • Can the phone site be disabled and have phones display the desktop site while designing phone site?

    Currently, I have a live desktop design website which is being updated regularly. I tried to begin a phone site design, but was interrupted with a change to the desktop site (I'm adding new sponsors to an event on a regular basis). When I uploaded to

  • Line 6 with Garageband

    Has anyone used Line 6 guitar products with Garageband, I would be interested in how you might have used these products, specifically the PODxt Live to work when recording guitar parts. Thanks.

  • About the fetching the data

    Here is the requirement for a new Z report that lists customer addresses in an ALV display for customers with activity over a certain period.  Use database table VBRK - the billing document header and customer master table KNA1. 1.            Selecti