Difference Between One-way SSL and Two Way SSL
Hi ,
Can any tell difference between one way and two ssl. apache to weblogic server which type of ssl we can configure. Please provide information on this.
thanks
In short below is the difference:
One Way SSL - Only the client authenticates the server
- This means that the public cert of the server needs to configured in the trust store of the client for this to happen.
Two Way SSL - The client authenticates the server & the server also authenticates the client.
- This means that the public cert of the server needs to configured in the trust store of the client for this to happen.
- Also the public cert of the client needs to be configured on the server's trust store
Please refer to http://publib.boulder.ibm.com/infocenter/wmqv6/v6r0/index.jsp?topic=%2Fcom.ibm.mq.csqzas.doc%2Fsy10660_.htm. In case of Two way SSL the step numbers 5 & 6 also occur.
You can implement either of them between apache and weblogic.
Hope this helps.
Thanks,
Patrick
Similar Messages
-
Difference between one step approval and N-step approval?
Hi Experts,
Can anyone tell what is major difference between one step approval and N step approval?
I guess its only one person will approve incase one step approval and where as in the N-step approval a shopping cart can be approved by many users under some prerequistes right??
can some one provide me some hints on this.....
how does it make a difference in workflows and how to mantain the settings for this in the SPRO. for this one to setup a one-step and N-step approvals. what are points to be taken care while setting up this?
Please can some one clarify me on this
Regards
Sairam.
IHi,
1 step approval - Number of approvals will be 1
n step - number of approvals greater then 2(since std approval workflow present till 2 level)
The general customising steps for Workflows apply to both of them (like SWU3 customising.event linkage etc) but other then that for,
1 step approval -
-->Need to activate the starting conditions
-->Agent assignment to be done seperately for the Approval task
(Also the N step workflow can be used as 1 step workflow with number of approvals being set to 1 through the Logic in the badi.)
N step approval -
-->to be implemented through BADI BBP_WFL_APPROV_BADI .This BADi actually determines the Agents/approvers for the workflow.
-->As per my exp,this workflow is very unstable and for few updates,you may have to apply number of notes(e.g. Approval status not updated properly,graphical preview not visible properly etc)
BR,
Disha.
Do reward points for useful answers. -
Time difference between one Ext Trig and multiple secondary triggers ?
An external device generates a 100 Hz square wave (primary). During
each 10 msec period, another device (secondary) generates multiple
pulses at random times. I want to determine the time, with respect to
each primary waveform's leading edge, when each and every of the
secondary pulses occurs. Not just the first secondary pulse.
Count Buffered Edges.vi example records times when multiple secondary
pulses occur, but there does not seems to be a way to set the counter
value to zero by the primary pulse (especially on STC cards).
The TIO example Two Edge Separation.vi only measures time between the
primary pulse and the first secondary pulse, not all secondary pulses.
The TIO Measure Position.vi fo
r encoder use mentions using the Z-index
on the gate pin to initialize the count value. Is there a way to
combine this with ability to record multiple buffreed time differences
I envision each 100 Hz leading edge resetting a counter (which is
counting a high frequency time base) to zero. Then each secondary
pulse latches that counter's value into memory.
For each count latched by the secondary pulses, it is not necessary to
know within which specific primary period it belonged to.
An alternative is to use two of the Count Buffered Edges.vi and record
the times of both primary and secondary pulses and take their time
difference in software.Answered on another thread...
http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=135&HFORCEKWTID=75037:5&HOID=5065000000080000009EA20000&HExpertOnly=&UCATEGORY_0=_32_%24_12_&UCATEGORY_S=0
Ron -
Mapping between one main component and two sub component
Hi Experts,
I am facing one problem.
The situation is:-
I have one main WD Component which has a TABSTRIP in a view.
In that view ,TABSTRIP has 2 tabs.
Each tab is having a view container.
So there are two view container and each view container corresponds to one sub WD.
So finally we have 2 seperate WD (Let say WD1 and WD2 ) and one main WD.
In main WD i have a Node , which is for TAB_SELECTED.It is bind witn the WD1 Node TAB_SELECTED.
Because of this whenever we change the value of TAB_SELECTED in WD1,It automatically reflect in Main WD.
But my problem is that i want to do it for WD2 as well.
I am unable to bind Node of Main WD to two diff Sub WD I.e WD1 and WD2.
How i can do this.
Please suggest.
Thanks
MaheshHello Mahesh,
I think you need to create two more nodes in the main WD compoennt .
map the nodes of WD1 and WD2 to two seperate nodes in main WD.
then in the method wddomodify check for the tab_selected value.
if it is tab_1. set the value of attribute in the main WD from node mapped to WD1.
if it is tab_2, set the value form node mapped to WD2.
thanks
sarbjeet singh -
Do we have a way to get the differences between xtext model before and after partial parse?
Do we have a way to get the differences between xtext model before and after partial parse?
As an example i have file contains 4 lines, xtext parsed this file and generated its model, then i made small modification in line number 3, so xtext partially parsed the file and generated another model.
The question is could we get the nodes that has been deleted from the model?
could we get the new nodes added to the model?
could we get the differences between the two models?Workflow {
bean = StandaloneSetup {
scanClassPath = true
platformUri = "${runtimeProject}/.."
// The following two lines can be removed, if Xbase is not used.
registerGeneratedEPackage = "org.eclipse.xtext.xbase.XbasePackage"
registerGenModelFile = "platform:/resource/org.eclipse.xtext.xbase/model/Xbase.genmodel"
component = ParseXextModel{
//Load the xtext model and keep the reference of the inmem model
component = DirectoryCleaner {
directory = "${runtimeProject}/src-gen"
component = DirectoryCleaner {
directory = "${runtimeProject}/model/generated"
component = DirectoryCleaner {
directory = "${runtimeProject}.ui/src-gen"
component = DirectoryCleaner {
directory = "${runtimeProject}.tests/src-gen"
component = Generator {
pathRtProject = runtimeProject
pathUiProject = "${runtimeProject}.ui"
pathTestProject = "${runtimeProject}.tests"
projectNameRt = projectName
projectNameUi = "${projectName}.ui"
encoding = encoding
language = auto-inject {
uri = grammarURI
// Java API to access grammar elements (required by several other fragments)
fragment = grammarAccess.GrammarAccessFragment auto-inject {}
// provides a compare view
fragment = compare.CompareFragment auto-inject {}
component = ParseXextModel{
//Load the xtext model again and keep the reference of the inmem model
component = CompareModel {
//Implement this using EMF Comapre to see the differnces between 2 models
} -
Difference Between GRIR is split to two accounts and posted to two accounts
User did an Invoice Verification (MIRO)
User found that the accounting entries is very unusual as the difference between the Invoice $ amount and the GRIR amount was posted to Stock accounts 20105000 and expenses account 87201000.
We need to know what should be the normal posting if there is any difference between invoice amount and GRIR.
And for this case, why and based on what the system split the difference to two accounts.It all depends upon the price indicator of the material in the Accounting 1 view of the the material master. The following results would happen:
1. Material maintained with Price indicator "S"(Standard Price)-In this scenario, the difference between the GRIR & Invoice will flow to Purchase Price Variance account(Expense) & NOTHING would flow to Inventory account.
Note: However, the incidental expenses like freight etc could be configured to flow in specific assigned GL accounts.
2. Material maintained with Price indicator "V"(Moving average price)-In this scenario, the difference between the GRIR & Invoice will flow to the Inventory Account.
Note: The above mentioned examples are SAP standard way unless you have configured/mapped different GL.
Hope this helps. -
What is the difference between saving to "Documents" and "Macintosh HD" and when should you use each one?
When you save to the folder with the little house icon, the file is placed at
/Users/your_user_name/
You would really have to go out of my way to save at:
(the shortcut for the Boot Drive, regardless of its name).
I am not sure how you decided that Time Machine is not saving your files. The default is for Time Machine to do incremental Backups of everything on all attached drives, except for certain temporary information in Cache files. If you have four Users, Time Machine will back them all up.
Looking at the raw Time Machine backups will tell you very little, because it does lots of its work with Hard Links, and because it does incremental backups, so only files that changed since the last Backup are saved at thet cycle. The way to determine whether Time Machine is saving things is to display the window you care about in the Finder, then invoke the "Star wars"/ "Back, back, back in time" Interface. -
Differences between One Arm and Route modes?
Hi Guys,
What are the differences between One Arm and Route modes? Can anyone please explain?
KrishnaHi Krishna,
Have a look at the two links below. They provide configuration examples for each of the two topologies along with explanation on the different commands used.
http://docwiki.cisco.com/wiki/Basic_Load_Balancing_Using_Routed_Mode_on_the_Cisco_Application_Control_Engine_Configuration_Example
http://docwiki.cisco.com/wiki/Basic_Load_Balancing_Using_One_Arm_Mode_with_Source_NAT_on_the_Cisco_Application_Control_Engine_Configuration_Example
I hope this helps
Daniel -
is there a difference between the LG EnV3 and the LG EnV3 VX9200 is this the same phone. the reason I ask is because one says it has internet access and the other one doesn't
It the same phone but you don't have to have data on it if you don't want since they are older phones. We had these phones without data as I didn't think they would be good for surfing the net compared to a smart phone. Mary
-
Difference between ECC 6.0 and earlier versions
Hi,
one of the difference between ECC 6.0 and earlier versions is that instead 'WS_UPLOAD' and 'WS_DOWNLOAD' in ECC we should use 'GUI_UPLOAD' and 'GUI_DOWNLOAD' respectively.
(of course SPDD and SPRO tcodes is known by everone i suppose)
Similarly can u all put down some differences here, atleast one entry by each, I think we can make a good docu. I have searched the net for the differences but could not get much, so by each of us contributing one each, it would become good docu..for all of us.
Thanx in advanceUnicode Errors Encountered and their Solutions
E1. In u201CTEXT MODEu201D the u201CENCODINGu201D addition must be specified.
Error:
OPEN DATASET FILE FOR OUTPUT IN TEXT MODE.
Solution:
OPEN DATASET FILE FOR OUTPUT IN LEGACY TEXT MODE.
E2. In Unicode, DESCRIBE DISTANCE can only be used with the IN BYTE MODE or IN
CHARACTER MODE addition.
Error:
DESCRIBE DISTANCE BETWEEN T_KOMK AND T_KOMK-HIEBO01 INTO BPOS.
Solution:
DESCRIBE DISTANCE BETWEEN T_KOMK AND T_KOMK-HIENR01 INTO BPOS
IN CHARACTER MODE.
E3. u201CUSR02-UFLAGu201D must be a byte-type field (Typ X or XSTRING )
Error:
IF USR02-UFLAG O YULOCK.
Solution: Since the data type of USR02-UFLAG is type INT and is compared with data type
X u2013 Hence the error. So we define a new variable ZULOCK and assign the
value of USR02-UFLAG to ZULOCK.
New variable
DATA: ZULOCK(1) TYPE X. "APBRP00
Assign value
ZULOCK = USR02-UFLAG.
Compare -
IF ZULOCK = YULOCK. u201Creplace IF USR02-UFLAG O YULOCK.
E4. HT cannot be converted to a Character type field
Error :
WRITE ht TO t_data+10(2).
Solution : Since the data type of ht is a type u2018Xu2019 and the data is been transfer to
t_data which has a data type u2018Cu2019. value of one data type cannot be copy to
another data type where one of them is type string .Hence the error occur,
so the data type of ht is been change to Type u2018Cu2019
OR
A Tab ( value 09 ) is introduced as part of the row. The value 09 is not converted in Unicode environment. Instead we need to use class
Error:
DATA: BEGIN OF ht,
x(1) TYPE x VALUE '09',
END OF ht.
Solution:
Define Class after the Tables definition.
CLASS cl_abap_char_utilities DEFINITION LOAD.
Data Defination : Comment internal table HT and define a variable HT type C.
* Insert + APRIA00 05/02/2007 Unicode project
* DATA: BEGIN OF ht,
* x(1) TYPE x VALUE '09'
* END OF ht.
* Insert - APRIA00 05/02/2007 Unicode project
DATA HT type C.
Before using HT assign Horizontal tab.
Ht = CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB.
E5. In Unicode programs the u201C#u201D cannot appear in names, as it is does here in the name u201C#LINESu201D
Error :
#LINES TYPE I,
Solution : Since the # is used in the start of name, it is not allowed. We need to
remove it.
Solution for the above
V_LINES TYPE I,
E6. In u201CTEXT MODEu201D the u201CENCODINGu201D addition must be specified as well as the addition was required FOR OUTPUT,FOR INPUT, FOR APPENDING OR FOR UPDATE was expected.
Error:
OPEN DATASET PATH_NAME IN TEXT MODE.
Solution:
Download = OPEN DATASET PATH_NAME FOR OUTPUT IN LEGACY TEXT MODE.
Upload = OPEN DATASET AUSZUG-FILE IN TEXT MODE FOR INPUT ENCODING DEFAULT.
E7. u201CTABu201D must be a character-type data object( data type C,N, D, T or String). Field string)
Error:
data: begin of tab, "Excel Parameter Split at TAB
t type x value '09', "Tabulator
end of tab.
concatenate 'Material' 'Package Status'
into z_download-line separated by tab.
( In the above command the two field are to be separated with a horizontal Tab. The earlier way of assigning the tab value u201809u2019 will not work in Unicode environment.
Solution:
Define a class just after the Table defination.
CLASS cl_abap_char_utilities DEFINITION LOAD.
Define variable Tab as shown below :
Data : TAB TYPE C.
Before the concatenate statement assign the value of Tab using pre-defined attributes.
TAB = CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB.
E8. Upload/Ws_Upload and Download/Ws_Download are obsolete, since they are not Unicode-
enabled; use the class cl_gui_frontend_services
Error-1: Function WS_DOWNLOAD is obsolete in Unicode environment.
call function 'WS_DOWNLOAD'
exporting
filename = zfilename
tables
data_tab = z_download.
Solutions-1: Instead of WS_DOWNLOAD use GUI_DOWNLOAD.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
* BIN_FILESIZE =
FILENAME = zfilename
TABLES
DATA_TAB = z_download.
E9. The "/" character is reserved for identification of namespaces. It must be entered twice.
The name of a namespace must be at least 3 characters long.
Error :
U/N(3) TYPE C, "U/N --> ERSETZT DURCH SPACE
Solution :
* Special character can not be used to define a data variable
* U/N(3) TYPE C, "U/N --> ERSETZT DURCH SPACE
U_N(3) TYPE C, "U/N --> ERSETZT DURCH SPACE
* Insert - APSUS02 07/02/2007 Unicode Project
E10. "LP_TAB" and "CS_TAB" are not mutually convertible. In Unicode programs,
"LP_TAB" must have the same structure layout as "CS_TAB", independent of the length
of a Unicode character.
Error : This error is encountered when data from one internal table is copied to another
internal table which different structure. In this case its LP_TAB & CS_TAB.
LP_TAB[] = CS_TAB[].
Solution :
* Replace + APSUS02 07/02/2007 Unicode Project
* LP_TAB[] = CS_TAB[].
move-corresponding CS_TAB to LP_TAB.
* Replace + APSUS02 07/02/2007 Unicode Project
E11. Could not specify the access range automatically. This means that you need a RANGE
addition.
Error : Range need to be specified as an addition to the command.
DO 4 TIMES VARYING HELP_CHAR FROM ABCD(1) NEXT ABCD+1(1).
Solution :
DO 4 TIMES VARYING HELP_CHAR FROM ABCD(1) NEXT ABCD+1(1)
* Insert + APSUS02 07/02/2007 Unicode Project.
RANGE ABCD+0(4).
* Insert - APSUS02 07/02/2007 Unicode Project.
E12 . Processing Terminated Error code: Error in opening /
Path not found when downloading to Unix directory.
Error : PARAMETER: outfile(92) DEFAULT
'/CP/interface/NPP/data/MX/cbslaprcpts'
LOWER CASE,
kmxmstrd AS CHECKBOX.
This error is encountered when the path is missing. The above path is related to CCP.
Solution: For testing purpose comment the original path and replace it with
/CP/interface/CCD/Unicode_test/
E13. Upload/Ws_Upload and Download/Ws_Download are obsolete, since they are not Unicode- enabled; use the class cl_gui_frontend_services
Error: Function WS_UPLOAD is obsolete in Unicode environment. (During UCCHECK)
Call function 'WS_UPLOAD'
Exporting
Filename = zfilename
Filetype = u2018DATu2019
Tables
data_tab = z_upload
Exceptions
Conversion_error = 1
file_open_error = 2
file_read_error = 3
invalid_table_width = 4
invalid_type = 5
no_batch = 6
unknown_error = 7
gui_refuse_filetransfer = 8
others = 9.
Solution: Instead of WS_UPLOAD use TEXT_CONVERT_XLS_TO_SAP. Do not use temporary file put the file name as it is.
1) First define a type pool and a variable of type truxs_t_text_data.
TYPE-POOLS: truxs.
DATA: it_raw TYPE truxs_t_text_data.
2) Use this it_raw in the function module in parameter i_tab_raw_data. Put file name and the internal table in the function module.
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
EXPORTING
* I_FIELD_SEPERATOR =
* i_line_header = ' '
i_tab_raw_data = it_raw " WORK TABLE
i_filename = zfilename
TABLES
i_tab_converted_data = z_upload[] "ACTUAL DATA
EXCEPTIONS
conversion_failed = 1
OTHERS = 2.
Comment u201Ci_line headeru201D. It takes the first/ header line of the file which is to be uploaded.
Put square brackets after internal table as shown above.
E14. CURSORHOLD may not be converted into a number.
Error: GET CURSOR LINE CURSORHOLD VALUE CURSOR_HOLD.
Solution: In the declaration part of CURSORHOLD, one field is of u2018Pu2019 type and one field is of u2018Iu2019 type, which is not allowed in Unicode environment.So change the the type of it to NUMC. -
What is the difference between owb repository owner and repository user?
what is the difference between owb repository owner and repository user?
Hi,
the repository owner has full rights to do every thing in the repository. There is only one repository owner.
There may be multiple repository user for one of the following two purposes:
1. When working in a team, each team member can be added as a different repository user and can have different grants assigned. That way you can also see who has deployed what objects or who has run a mapping.
2. To be able to deploy into a database schema, that db user user has to be added as repository user as well. Make sure the "user is target schema" checkbox is checked.
Regards,
Carsten. -
What difference between a domain trust and a forest trust?
What difference between a domain trust and a forest trust?
Greetings!
The answer is right on the question! :)
I think it is best to distinguish properly between forest and domain. This article is a good one:
What Are Domains and Forests?
But in a nutshell, a forest trust is mostly used between two organizations, Suppose company A has a unique forest and company B has another unique forest as well, when they are merged they can simply create a forest trust between each other, This trust can
be one-way or two-way depending on your needs.
Domain trusts are between a single instance (domain) of a forest to another instance (domain) of another forest. It is worth mentioning that trust can be transitive as well.
What Are Domain and Forest Trusts?
I hope you got the answer.
Regards.
Mahdi Tehrani |
|
www.mahditehrani.ir
Please click on Propose As Answer or
to mark this post as
and helpful for other people.
This posting is provided AS-IS with no warranties, and confers no rights.
How to query members of 'Local Administrators' group in all computers? -
Ok, so this is my first post here and I am admittedly terrible at forums. Someone might say, "This was addressed in the ___________ thread by __________! Go read it!" --- that may be so but I've spent enough hours trying to google this problem into submission to no avail based on what is apparently working for others, so I would like a chance to get specific answers to specific questions that aren't from Mar 2011, etc.
So first of all, I'm confused by all the various Wine programs/apps/whatevers. I've seen Wine, Wineskin, Winery, Wine Bottler, and at this point I wouldn't be surprised if there are even more than that. What's the difference between all of these and how do they work with one another? What do I actually need to get windows programs working?
All of my google searches have led me to people giving out fish, but no one giving out fishing lessons. I'm not a pro at mac and windows and all that, but I'm a fairly bright individual who gets VERY frustrated, very quickly, when I don't understand the why and how of something I'm attempting.
I've also found "answers" where the person attempting to help starts off helpful enough, but degrades into the most archaic of techno-babble after about 5-6 sentences. On the other hand, I've watched tutorials on youtube where the poster decides to skip (apparently crucial) sections of the tutorial, and mutters such gems as: "... you might wanna have to run Wine first before you can do anything, cuz I think it has to configure it and set up a bunch of stuff"
O.o
A happy medium between techno-babble and the most basic of explanations would be ideal for me, and I'd imagine for others as well.
Here is a summarized history of my relationship with Wine:
Diablo II - I downloaded this awesome thing which ended up being... uh... I guess Diablo II in a Wineskin "wrapper". I'm not sure, all I know is that it's a D2 icon, and if I go to 'show package contents', it's got C drive, Program Files, et cetera inside of it. I double click it, it launches D2, and it works like a dream. <3
'Vanilla Install' - That's what I heard someone call it. It was the command/terminal style install using xquartz and xcode found at http://www.davidbaumgold.com/tutorials/wine-mac/. I followed every instruction to the letter, and got all the way to '$ sudo port install wine', at which point it started going smoothly, free from the possible error he described regarding the installation of xcode, and then just failed after I left the room to use the restroom and came back. Please don't ask me to repeat what the error was, because honestly, after reading more things on the interwebs, I'm confused as to why it's even necessary to go through all of that, so I'd rather not try that route again anyways, rendering the error message quite possibly irrelevant.
Wine + Wine Bottler - So I decided to try to seek out an easier method, as I know that one must exist that doesn't involve command lines. I found a video tutorial at http://www.youtube.com/watch?v=m0BBkISOcEA, and oh man would it be great if that method had actually worked. Again, I followed all instructions provided to procure my free fish, and at the point in the video where he declares that "xquarts or x11 will open" - it doesn't open. Nothing opens. I was trying to install Star Sonata, btw.
So here I am, thoroughly worn out, frustrated at all the random places Wine is installed on my mac now, and just want someone to explain it all, from top down, without getting toooooooo technical on me. I know that might be asking a lot...## I know that the poster has already found a solution, but the following is a possible answer for others that have similar issues.
For Winebottler, just go to their website and download it. Run the program. Choose .wine as your prefix (best choice) or whatever suits you best. You'll need a functional X11. If you can't use the one that comes with your mac, download the latest one from the website.
If your issue is one with Winebottler's Wine not running correctly due to X11, then you have a pretty ugly problem, although a simple upgrade is the best solution (Upgrade XQuartz.app).
http://www.davidbaumgold.com/tutorials/wine-mac/#part-1
The above website is the easiest way to get REAL wine on your computer. First of all, Wineskin WInery, etc. are NOT WINE. They are 3rd party apps that may use Wine or may have originally part of Wine, but they are no longer up to date with Wine. WineBottler is currently up to date with the stable releases of Wine (but not the maintenence releases).
For the website tutorial and to run Wine on your mac without using a thrid party app, you will need to know a few things.
First, you will need to know basic control of the command line. That means, sudo (you must know the administrator password to your computer), and the forms of cd (change directory).
Second, you will need Xcode. Download 4.2 (stable) or whatever other versions you want, but beware: It is over 1 GB, and you will need time for it to work.
Third, you will need to get MacPorts and configure it. The tutorial should have this data.
When you download wine (use sudo port install wine-devel for the latest development release of wine), it will first download a lot of dependencies. This will take a while. After that, it will download wine itself.
After obtaining wine, to run a program, open the terminal.app window.
cd desktop/XYZ/ZYZ\ WRQ
The above will first enter the desktop, then folder XYZ, then folder ZYZ WRQ. From here,
wine th11e.exe
Or whatever executable you are trying to open. (Using Subterranean Animism as my example).
It should, in theory, run the program. Watch the terminal for errors. If there is an X11 problem, then it's not wine acting up. If the app crashes or has other issues, check the Wine Application Database to see if your app is compatible with wine.
If you have any further questions or other things, feel free to reply; I may or may not get back to you, but there's a good chance that someone will come in eventually. Otherwise, the Wine Wiki should have some information. -
Differences between the alv's and alv grid dispaly
hi guys
.........please send the differences between the alv's and alv grid display.
thanks....Hi Midathala,
Plz go through the links might be useful to you.
Simple ALV report
http://www.sapgenie.com/abap/controls/alvgrid.htm
http://wiki.ittoolbox.com/index.php/Code:Ultimate_ALV_table_toolbox
ALV
1. Please give me general info on ALV.
http://www.sapfans.com/forums/viewtopic.php?t=58286
http://www.sapfans.com/forums/viewtopic.php?t=76490
http://www.sapfans.com/forums/viewtopic.php?t=20591
http://www.sapfans.com/forums/viewtopic.php?t=66305 - this one discusses which way should you use - ABAP Objects calls or simple function modules.
2. How do I program double click in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=11601
http://www.sapfans.com/forums/viewtopic.php?t=23010
Check the program in the following link:
http://sap-img.com/abap/display-secondary-list-using-alv-grid.htm
3. How do I add subtotals (I have problem to add them)...
http://www.sapfans.com/forums/viewtopic.php?t=20386
http://www.sapfans.com/forums/viewtopic.php?t=85191
http://www.sapfans.com/forums/viewtopic.php?t=88401
http://www.sapfans.com/forums/viewtopic.php?t=17335
http://www.sapdevelopment.co.uk/reporting/alv/alvgrid_basic.htm
4. How to add list heading like top-of-page in ABAP lists?
http://www.sapfans.com/forums/viewtopic.php?t=58775
http://www.sapfans.com/forums/viewtopic.php?t=60550
http://www.sapfans.com/forums/viewtopic.php?t=16629
5. How to print page number / total number of pages X/XX in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=29597 (no direct solution)
6. ALV printing problems. The favourite is: The first page shows the number of records selected but I don't need this.
http://www.sapfans.com/forums/viewtopic.php?t=64320
http://www.sapfans.com/forums/viewtopic.php?t=44477
7. How can I set the cell color in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=52107
8. How do I print a logo/graphics in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=81149
http://www.sapfans.com/forums/viewtopic.php?t=35498
http://www.sapfans.com/forums/viewtopic.php?t=5013
9. How do I create and use input-enabled fields in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=84933
http://www.sapfans.com/forums/viewtopic.php?t=69878
10. How can I use ALV for reports that are going to be run in background?
http://www.sapfans.com/forums/viewtopic.php?t=83243
http://www.sapfans.com/forums/viewtopic.php?t=19224
11. How can I display an icon in ALV? (Common requirement is traffic light icon).
http://www.sapfans.com/forums/viewtopic.php?t=79424
http://www.sapfans.com/forums/viewtopic.php?t=24512
12. How can I display a checkbox in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=88376
http://www.sapfans.com/forums/viewtopic.php?t=40968
http://www.sapfans.com/forums/viewtopic.php?t=6919
13. Top-of-page in ALV
selection-screen and top-of-page in ALV
14. ALV Group Heading
http://www.sap-img.com/fu037.htm
How to add list heading like top-of-page in ABAP lists?
http://www.sapfans.com/forums/viewtopic.php?t=58775
http://www.sapfans.com/forums/viewtopic.php?t=60550
http://www.sapfans.com/forums/viewtopic.php?t=16629
15. ALV output to PDF conversion
It has an example code for PDF Conversion.
http://www.erpgenie.com/abap/code/abap51.htm
converting the output of alv in pdf
Thanks
Mohinder Singh Chauhan -
Differences between MDM 3.0 and MDM 5.5?
Hi,
Can anybody tell, what are the differences between MDM 3.0 and MDM 5.5?
I heard that, there are lot and lot of changes...
Thanks for your reply,
regrads,
cgWe can look at differences in more than one way:
1. Technology wise
MDM5.5 is developed in C++ & runs on a C++ engine as compared to MDM 3.0 which runs under WAS
However MDM 5.5 is integrated with NW largely, though it can & is planned to be improved further
2. Product Catalog Management
MDM 5.5 has rich PCM capabilities which did not exist in MDM 3.0
3. Other additional capabilities in 5.5
Multilingual support
Syndication of data to XI or file system
Lean, R/3 Idoc based model for supplier, customer, material, employee
4. Ease of installation and usage is a also an advantage of 5.5
You can read Nitza Levi's blog on MDM home page for more details
Maybe you are looking for
-
HP Laserjet M2727nf - Firmware not loading to Printer
My printer display was not working so I ordered a new one. But as I read some postings it seems to be by formatter board. I baked the formatter board. After I baked it, the display would show: Hewitt Packard >>>>>. I did the below but the firmwar
-
Problem with WLST in weblogic application server 10.3 on solaris 10 x86
Hi Friends, I installed Sun Solaris 10 on my desktop x86. I am able to install oracle weblogic application server 10.3. I created one domain and I am trying to start AdminServer on that using WLST command. Before that , I started the admin server fro
-
What do I need to connect my Macbook pro to a display?
-
Z10 Product Improvement Ideas: Peak, Flow and Navigation
Note sure what the best way to get some ideas across to Blackberry but since I've been using my Z10, there are a few ways that I think that navigation and application access can be improved. Sometimes I feel that you need to perform one too many swip
-
I have a template I set up in AppleWorks several years back to print addresses on Avery-type labels. I just tried to print one, but nothing happened. I looked in the printer utility (Canon iP90) window, and the job appears there, but says "Stopped".