Difference between ora-00600 and ora-07445

Hi all,
Both ora-00600 and 07445 are generic errors, which arises due to n number of reasons. Is there any particular difference between these two errors. If so please let me know.....
Thanks in advance
kumareshan.......

I don't think the statement is true. The answers is in the two metalink doc you posted.
[Note:146580.1] Additional ORA-600 related information.
[Note:211909.1] Additional ORA-7445 related information.
in short,
ORA-600 is from kernel code of the Oracle
An ORA-7445 error is raised by an Oracle server process when it has received a fatal signal from the operating system.

Similar Messages

ORA-00600 and ORA-07445

Hello I have this erros located into udump\log_file:
Fri May 30 04:13:57 2008
SMON: Parallel transaction recovery tried
Fri May 30 04:14:38 2008
Errors in file l:\oracle\admin\opera\bdump\opera_j006_5992.trc:
ORA-07445: exception encountered: core dump [ACCESS_VIOLATION] [_msqsub+23] [PC:0x1FEE80B] [ADDR:0x5B3F] [UNABLE_TO_READ] []
Fri May 30 04:14:42 2008
SMON: Parallel transaction recovery tried
Fri May 30 06:26:57 2008
Errors in file l:\oracle\admin\opera\udump\opera_ora_900.trc:
ORA-00600: internal error code, arguments: [kokcup:01], [0], [0], [], [], [], [], []
Fri May 30 06:26:58 2008
Errors in file l:\oracle\admin\opera\udump\opera_ora_900.trc:
ORA-07445: exception encountered: core dump [ACCESS_VIOLATION] [_kksasd+16] [PC:0x86D4F0] [ADDR:0x458B03CB] [UNABLE_TO_READ] []
ORA-00600: internal error code, arguments: [kokcup:01], [0], [0], [], [], [], [], []
Fri May 30 06:26:59 2008
Errors in file l:\oracle\admin\opera\udump\opera_ora_900.trc:
ORA-00600: internal error code, arguments: [kssadpm: null parent], [], [], [], [], [], [], []
ORA-07445: exception encountered: core dump [ACCESS_VIOLATION] [_kksasd+16] [PC:0x86D4F0] [ADDR:0x458B03CB] [UNABLE_TO_READ] []
ORA-00600: internal error code, arguments: [kokcup:01], [0], [0], [], [], [], [], []
Fri May 30 06:27:00 2008
Errors in file l:\oracle\admin\opera\udump\opera_ora_900.trc:
ORA-00600: internal error code, arguments: [kssadpm: null parent], [], [], [], [], [], [], []
ORA-07445: exception encountered: core dump [ACCESS_VIOLATION] [_kksasd+16] [PC:0x86D4F0] [ADDR:0x458B03CB] [UNABLE_TO_READ] []
ORA-00600: internal error code, arguments: [kokcup:01], [0], [0], [], [], [], [], []
Fri May 30 07:00:38 2008
Thread 1 advanced to log sequence 5849
Current log# 9 seq# 5849 mem# 0: I:\ORACLE\ORADATA\OPERA\REDO9_01.RDO
Fri May 30 10:04:03 2008
Thread 1 cannot allocate new log, sequence 5850
Private strand flush not complete
Current log# 9 seq# 5849 mem# 0: I:\ORACLE\ORADATA\OPERA\REDO9_01.RDO
Thread 1 advanced to log sequence 5850
Current log# 10 seq# 5850 mem# 0: I:\ORACLE\ORADATA\OPERA\REDO10_01.RDO
Fri May 30 10:05:20 2008
ALTER DATABASE BACKUP CONTROLFILE TO 'C:\Program Files\OmniBack\tmp\ctrl_OPERA.dbf' REUSE
Fri May 30 10:05:20 2008
Completed: ALTER DATABASE BACKUP CONTROLFILE TO 'C:\Program Files\OmniBack\tmp\ctrl_OPERA.dbf' REUSE
I'm not so familiar with ORACLE. I have experience with MS SQL. Oracle create .trc files about 2KB each, 2GB every day.
I appreciate your help!
Message was edited by:
julata

Hi,
Thse both errors come under the category of internal errors.The best place to look for their troubleshooting and remedies is using Support Services.
Please look into metalink.oracle.com and search for these two error codes.
I would recommend to send teh trace to the Support and let a support guy handle it.
Aman....

SQL*Loader error ORA-00600 and ORA-26095

Hi all,
We have a problem with the SQL*Loader Utility. We use an 8i-Database (8.1.7) and SQL*Loader 9.2.0.1.0. We have no Trims or other functions active in the control file and do a direct path load.
It used to work properly until this morning.
Now we have the following errors (it is in German - but I can translate it):
Satz 90153: Abgelehnt - Fehler in Tabelle SCHEMA1.T_IMPORT.
ORA-00600: Interner Fehlercode, Argumente: [klaprs_50], [7], [], [], [], [], [], []
... about 50 equal errors
Specify SKIP=90171 when continuing the load.
SQL*Loader-926: OCI-Fehler; uldlm:OCIDirPathFinish fÃ¼r Tabelle SCHEMA1.T_IMPORT
ORA-26095: Nicht verarbeitete Stream-Daten vorhanden
SQL*Loader-2026: Der Ladevorgang wurde abgebrochen, weil er nicht fortgesetzt werden kann.
Specify SKIP=90171 when continuing the load.
Trnaslation:
00600 - Internal error code, arguments: ...
OCI-Fehler = OCI error
fÃ¼r Tabelle = for table
ORA-26095: Nicht verarbeitete Stream-Daten vorhanden = Non processed stream data existing
SQL*Loader-2026: Der Ladevorgang wurde abgebrochen, weil er nicht fortgesetzt werden kann. = Load process has been cancelled as it cannot be continued.
Has anyone got a clue?!?!?!

Hi,
It's very clear that import 9i is for an import into 9i database.
Upgrade 8i to 9i indicates that we can make an export 8i from 8i database and import 9i into 9i database, but never use a tools like export from other version...
If you want import data from 9i database into 8i use exp tools 8i, and imp 8i.
I devise you to read Metalink note 132904.1 - compatibility matrix for export & import between different oracl version.
Nicolas.

Error ora-00600 and error-472

my database suddenly become unavilabe, I check the log file and i found error code ora-00600 and when i check the trace log file i found error error472. any suggest

Just search on metalink .. You can always use below note for trouble shooting 600/7445 errors ..
153788.1 - Troubleshoot an ORA-600 or ORA-7445 Error Using the Error Lookup Tool

Difference between Unique key and Primary key(other than normal difference)

Hello,
1).Can any one tell me any other difference between Unique key and Primary key other than it having NULLs.
2). What is the difference the words 'DISTINCT' and 'UNIQUE' in a sql query.
Thanks in advance.

Hi
If you don't believe me than see the documentation in
OTN.
Ott Karesz
http://www.trendo-kft.hu
SQL> create table scott.tbl_clob
2 (sss CLOB)
3 /
Tabelle wurde angelegt.
SQL> insert into scott.tbl_clob values('wrwrwrw')
2 /
1 Zeile wurde erstellt.
SQL> insert into scott.tbl_clob values('wrwrwrw')
2 /
1 Zeile wurde erstellt.
SQL> select distinct sss from scott.tbl_clob
2 /
select distinct sss from scott.tbl_clob
FEHLER in Zeile 1:
ORA-00932: nicht übereinstimmende Datentypen
SQL> select unique sss from scott.tbl_clob
2 /
select unique sss from scott.tbl_clob
FEHLER in Zeile 1:
ORA-00932: nicht übereinstimmende Datentypen
SQL> select distinct to_char(sss) from scott.tbl_clob
2 /
TO_CHAR(SSS)
wrwrwrw
SQL> select unique to_char(sss) from scott.tbl_clob
2 /
TO_CHAR(SSS)
wrwrwrw
SQL>

Ora 600 and ora 7445 error in oracle 10g r2

hi all,
we are using Oracle 10g r2.
os is windows 2003 server,
ram is 4 gb.
front end is java .
we got a below mentioned errors.
i got the RA-00600: internal error code, arguments: [qerghFetch:inc], [], [], [], [], [], [], [],
and ORA-07445: exception encountered: core dump [ACCESS_VIOLATION] [unable_to_trans_pc] [PC:0x61F04AC9] [ADDR:0xC] [UNABLE_TO_READ] []
and Error 0 in kwqmnpartition(), aborting txn errors.
for aug 3 11.42.47 we got a ora 600 error after that through front end (java) users can't able to connect the database.the not able to executed the query session disconnected error.
what is reason for theis error . how it will rectifiy.?
pls advice.Below i attached the alret log message .
Sun Aug 02 04:04:24 2009
Error 0 in kwqmnpartition(), aborting txn
Sun Aug 02 05:48:10 2009
Error 0 in kwqmnpartition(), aborting txn
Sun Aug 02 05:49:10 2009
Error 0 in kwqmnpartition(), aborting txn
Sun Aug 02 07:38:49 2009
Thread 1 advanced to log sequence 1732
Current log# 3 seq# 1732 mem# 0: E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\REDO03.LOG
Sun Aug 02 07:44:14 2009
Error 0 in kwqmnpartition(), aborting txn
Sun Aug 02 07:45:14 2009
Error 0 in kwqmnpartition(), aborting txn
Sun Aug 02 22:00:26 2009
Thread 1 advanced to log sequence 1733
Current log# 1 seq# 1733 mem# 0: E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\REDO01.LOG
Mon Aug 03 07:08:15 2009
Thread 1 advanced to log sequence 1734
Current log# 2 seq# 1734 mem# 0: E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\REDO02.LOG
Mon Aug 03 09:28:23 2009
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 09:30:27 2009
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 11:42:47 2009
Errors in file e:\oracle\product\10.2.0\admin\orcl\udump\orcl_ora_6012.trc:
ORA-00600: internal error code, arguments: [qerghFetch:inc], [], [], [], [], [], [], []
Mon Aug 03 13:20:00 2009
Thread 1 advanced to log sequence 1735
Current log# 3 seq# 1735 mem# 0: E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\REDO03.LOG
Mon Aug 03 16:07:07 2009
Errors in file e:\oracle\product\10.2.0\em_2\rdbms\trace\orcl_ora_4756.trc:
ORA-07445: exception encountered: core dump [ACCESS_VIOLATION] [unable_to_trans_pc] [PC:0x61F04AC9] [ADDR:0xC] [UNABLE_TO_READ] []
Mon Aug 03 16:07:11 2009
Process m000 died, see its trace file
Mon Aug 03 16:07:11 2009
ksvcreate: Process(m000) creation failed
Mon Aug 03 16:08:37 2009
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 16:10:40 2009
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 17:25:05 2009
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 17:27:11 2009
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 17:32:19 2009
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 17:33:24 2009
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 18:52:08 2009
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 18:54:09 2009
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 19:05:33 2009
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 19:09:02 2009
Errors in file e:\oracle\product\10.2.0\em_2\rdbms\trace\orcl_ora_5132.trc:
ORA-07445: exception encountered: core dump [ACCESS_VIOLATION] [unable_to_trans_pc] [PC:0x7C34126B] [ADDR:0x0] [UNABLE_TO_WRITE] []
Mon Aug 03 19:10:27 2009
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn

Hi reshumakur
As this is your PRODUCTION system THEN_ The best help to offer in case of ORA-600, and ORA-7445 is to open SR with metalink. Submit with the SR the following
1- Alert log
2- Trace files (in ur case e:\oracle\product\10.2.0\admin\orcl\udump\orcl_ora_6012.trc: and e:\oracle\product\10.2.0\em_2\rdbms\trace\orcl_ora_4756.trc:)
3- Describe what was happening when you had these errors.
Try to avoid free help when you have ORA-600 and ORA-07445. This errors could be becuase of BUGS. Oracle Support will know this from the call stack in the trace file.
Then Do your best to patch 10.2.0.4 and the latest CPU patch.
Good Luck

Difference between roll back and undo segment.

Hi ,
Oracle 10.2.0.1.0
whats the difference between roll back and undo segemnt ? are they one and same as per changing version of oracle ? please help

Hi,
Both will do the same functionality,but in oracle 9i they made it simplify ,because if u are using rollback segments ,u need to put them online in init.ora and u need to take care space management etc.
so in oracle 9i they introduced undo tablespaces on that u can creage undo segments and space management will be take care by oracle managed files ,so its reduces the burden of dba
Regards,
Simma....

Difference between Scan Listener and Node listener

Hi,
I read the concept of SCAN in 11g R2 Grid Infrastructure. In that i come accross the below statements
" 3 SCAN IP's and 3 SCAN Listeners will be up in the Cluster even if onlu ONE NODE IS UP with Clusterware active. This is BECAUSE SCAN listeners are not like NODE LISTENERS; they simply reroute connections so they do not need an instance to be available beneath them to make a database connections".
Could some one please explan me the difference between Scan Listener and Node listener?
Thanks in advance.
Regards,
Stephen

The SCAN listener is the new feature in 11g. RAC in 9i and 10g had only node listeners. In earlier releases, the clients had to know each of the node listeners and define load balancing / failover between the node listener.
Each node in the RAC cluster has a TNS Listener listening on the VIP.
The SCAN is a single cluster-wide listener (although actually running as three separate processes, one on each node).. The client now needs to know only the SCAN listener. It does not need information of the node listeners to be maintained in the client-side tnsnames.ora file. SCAN allows for automatic load balancing as the client is directed to the nodes that are "up and able to take new connections" only. Also, as new nodes are added to the cluster, SCAN keeps track of them, the client tnsnames.ora does not need to be updated for new nodes.
Hemant K Chitale

What is difference between sy-tabix and sy-index.

SAP Seniors,
Can you please let me know what is difference between sy-index and sy-tabix.
I read the SAP help, it is confusing for me. it looks like both are same from help. please help me.
Thank you
Anitha.

HI,
Here is a brief description of difference between SY_TABIX and SY_INDEX and using them with several conditions.
SY-TABIX
Current line of an internal table. SY-TABIX is set by the statements below, but only for index tables. The field is either not set or is set to 0 for hashed tables.
APPEND sets SY-TABIX to the index of the last line of the table, that is, it contains the overall number of entries in the table.
COLLECT sets SY-TABIX to the index of the existing or inserted line in the table. If the table has the type HASHED TABLE, SY-TABIX is set to 0.
LOOP AT sets SY-TABIX to the index of the current line at the beginning of each loop lass. At the end of the loop, SY-TABIX is reset to the value that it had before entering the loop. It is set to 0 if the table has the type HASHED TABLE.
READ TABLE sets SY-TABIX to the index of the table line read. If you use a binary search, and the system does not find a line, SY-TABIX contains the total number of lines, or one more than the total number of lines. SY-INDEX is undefined if a linear search fails to return an entry.
SEARCH <itab> FOR sets SY-TABIX to the index of the table line in which the search string is found.
SY-INDEX
In a DO or WHILE loop, SY-INDEX contains the number of loop passes including the current pass.
Hope this helps.
Thank you,
Pavan.

Difference between sy-tabix and sy-index?

tell me about sy-tabix and sy-index?what is the difference between sy-tabix and sy-index?
Moderator Message: Please search before posting. Read the [Forum Rules Of Engagement |https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement] for further details.
Edited by: Suhas Saha on Jun 18, 2011 5:33 PM

HI,
Here is a brief description of difference between SY_TABIX and SY_INDEX and using them with several conditions.
SY-TABIX
Current line of an internal table. SY-TABIX is set by the statements below, but only for index tables. The field is either not set or is set to 0 for hashed tables.
APPEND sets SY-TABIX to the index of the last line of the table, that is, it contains the overall number of entries in the table.
COLLECT sets SY-TABIX to the index of the existing or inserted line in the table. If the table has the type HASHED TABLE, SY-TABIX is set to 0.
LOOP AT sets SY-TABIX to the index of the current line at the beginning of each loop lass. At the end of the loop, SY-TABIX is reset to the value that it had before entering the loop. It is set to 0 if the table has the type HASHED TABLE.
READ TABLE sets SY-TABIX to the index of the table line read. If you use a binary search, and the system does not find a line, SY-TABIX contains the total number of lines, or one more than the total number of lines. SY-INDEX is undefined if a linear search fails to return an entry.
SEARCH <itab> FOR sets SY-TABIX to the index of the table line in which the search string is found.
SY-INDEX
In a DO or WHILE loop, SY-INDEX contains the number of loop passes including the current pass.
Hope this helps.
Thank you,
Pavan.

What is difference between sy-index and sy-tabix and where both are using ?

what is difference between sy-index and sy-tabix and where both are using ?

hi nagaraju
sy-tabix is in Internal table, current line index. So it can only be used while looping at the internal table.
sy-index is in Loops, number of current pass. This you can use in other loop statements also (like do-enddo loop, while-endwhile)
SY-INDEX is a counter for following loops: do...enddo, while..endwhile
SY-TABIX is a counter for LOOP...ENDLOOP, READ TABLE...
Here is an example from which you can understand the difference between sy-tabix and sy-index.
Itab is an internal table with the following data in it.
id Name
198 XYZ
475 ABC
545 PQR.
loop at itab where id > 300.
write :/ itab-id, itab-name , sy-tabix, sy-index.
endloop.
My output will be :
475 ABC 2 1
545 PQR 3 2
Sy-tabix is the index of the record in internal table.
sy-index gives the no of times of loop passes.
So, for the first record in the output (475 ABC), 2 is the index of the record in internal table and as it is first time loop pass occured, sy-index value is 1.
Regards,
navjot
award points

The difference between chapter markers and dvd studio pro markers

Does anyone know what is the difference between chapter markers and dvd studio pro markers? I can not find anywhere on Google. Also in the tutorials I have seen, suggesting DVD Studio Pro markers, but it did not mention the chapter markers.
Thanks,

"Adding Chapter and Compression Markers to Your Sequence
Once you have your edited sequence or program finished, you can add markers to the sequence for use on DVD. Markers are reference points you can place within clips or sequences that identify specific frames. There are two kinds of markers you can add that directly relate to authoring a DVD—chapter markers and compression markers.
• Chapter markers allow DVD authoring applications to create a navigable chapter list for your exported QuickTime movie. Chapter markers force MPEG keyframes (known as I-frames) at their location, since the DVD specification requires an I-frame at each chapter point.
• Compression markers identify areas of abrupt change and include two types: those that are automatically inserted by Final Cut Pro at all edit points, and those you manually place in the clip or sequence. Like chapter markers, compression markers force I-frames at their location, although in this case it is for better quality encoding, and they are not used to create a chapter list.
Note: When you export a QuickTime movie, you have an option to export various kinds of markers, including compression, chapter, or DVD Studio Pro markers. *When you choose to export DVD Studio Pro markers, Final Cut Pro actually exports chapter markers and all compression markers.* This includes compression markers you set manually, as well as ones created automatically by Final Cut Pro at edit and transition points."
From the Final Cut Pro User Manual.
So, JS was right the first time

The difference between an iphone and an ipod touch?

i want to know if the difference between an iphone and an ipod touch is just that the iphone is like a phone that has internet and is a phone. or what else is it?

The iPhone includes the same as an iPod Touch but also includes a phone, a camera, and a GPS radio.
In addition to having internet access via wi-fi, the iPhone also has internet access via the cellular network, so as long as you have cellular reception with the iPhone, you have access to the internet in addition to having access via an available wi-fi network.

The difference between system restore and last good known configuration

hi,
what is the difference between system restore and last good known configuration.
in which situation you use system restore ,and in which situation you use last good known configuration.
very short answer wil be enough.
thanks
johan
h.david

Last Known Good Configuration deals only with Starting Windows eg. a bad registry or incorrect driver is preventing Windows to start.It recovers the registry settings of HKEY_LOCAL_MACHINE\System\CurrentControlSet
While System Restore uses restore points to return your system files and settings to an earlier point in time without affecting personal files. Restore points are created automatically every week, and just before significant system events, such as the installation
of a program or device driver. You can also create a restore point manually.You can undone system restore but there is no such option in Last Known Good Configuration.
Last Known Good Configuration is disabled in Windows 8 or,Windows 8.1 by default.
Try using Last Known Good Configuration if you can't start Windows, but it started correctly the last time you turned on the computer.
Try using System Restore to return the system to an earlier point in time when things worked correctly.
S.Sengupta, Windows Entertainment and Connected Home MVP

Difference between sy-datum and any given date

Dear Friends;
I have one query regarding DATE I wanna calculate the difference between
SY-DATUM and ANY GIVEN DATE . Is there any function or code available that take one parameter as sy-datum and another parameter as any given date and give result as no. of days between them
Regards;
Parag

DATA: DATEDIFF TYPE P.
CALL FUNCTION 'SD_DATETIME_DIFFERENCE'
EXPORTING
    date1                 = '20071122'
    time1                 = '000001'
    date2                 = '20070905'
    time2                 = '000001'
IMPORTING
   DATEDIFF               = DATEDIFF
EXCEPTIONS
   INVALID_DATETIME       = 1
   OTHERS                 = 2.
Greetings,
Blag.

Difference between ora-00600 and ora-07445

Similar Messages

Maybe you are looking for