Difference between party and service without party

Hi all,
Please tell me the difference between Service and Service without party and also let me know what is Business system, Business service and Integration process.
regards,
sudha

Hi Sudha
Party
Party is used to represent a Business Partner (doesnt belong to the current landscape) which is defined in B2B Scenarios.So All the systems/services accociated with the Party are referred only as Services.
Service without Party
It is used to represent any service within the landscape and is used in A2A communication.
Check the Threads for reference...
Party & Service without Party
Diff b/w Party & Service w/o Party in Integration Directory?
Differenz between services to use
Party and Service without party
Use-Case for Business Services (Service Without Party) in SAP XI
Business System
Business system will use only when you defind in SLD to identify your sender or receiver.
Business Service
Business service will use to indetify your sender or reciver if we can't defind in SLD then we need to use the business serivce
Cheers..
Vasu
** Reward Points if found useful **

Similar Messages

What's the difference between Routing and Service Callout in ALSB?

I am puzzled by that.
what's the difference between them.
Or what's the situation should use Routing, and that of service callout?

There is little difference between routing and service callout.
Routing is symbolizes the transition of request thread to a response thread starts. (in OSB every invocation of proxy is undertaken by different request and response threads ). So by this definition, there can be only one route node in a pipeline.
Service call out is also used for similar actions as route node , but in pipeline. So service callout can be either in request pipeline (request thread) or in response pipeline (response thread ) . So in a proxy you can have multiple ServiceCallouts but only one route node.
There are some other slight differences.
Manoj

Difference between party and service

Hi,
I know when we are going to party and service (Normally party means. when we are doing Business to Business ) but what is exact difference between party and service.. and if possible definitions also..
Thanks
Babu.

Babu,
Refer to url http://help.sap.com/saphelp_nw04/helpdata/en/87/1d6e3fefa13042e10000000a114084/frameset.htm
An excerpt
Services without a party are typically used when configuring company-internal processes. Parties (with assigned services) are typically used when configuring cross-company processes.
Also refer to one of your previous forum questions and my response Re: Business System and Business Service Posted: Nov 28, 2007 4:31 PM in response to: BABU
You usually use business system services when configuring internal company processes.
You usually use business services when configuring cross-company processes. In this case, you only make your interfaces known to the business partners involved and either do not make any details about your own system landscape available, or only specific details.
Hope this helps,
Mike

What is the significance of Party and Service without Party in ID? Help!

Hi Experts,
I often get confused with the Party and Service without Party in Integration directory. What is the difference between these two? When to use Party and When to use Service without party?
Kindly help!
Thanks
Gopal

Hi,
you need to use a party when you want to change some header fields
of your XI message (when communicating in B2B scenarios for example)
with party you can also use IDOC partner profiles other then LS
(like LI, VN)
but in most cases in A2A scenarios you never use the party object
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

Party and Service without party

Hi All,
I totally understand the definition of Party and services, but on an application point of view when do we actually go in for party and when do we go in for service w/o party??? I feel the diff. is minute but there should be an industry std. and I would like to follow it...
My scenario is Idoc communicating to HTTP using XI 3.0..
Thanks,
Teresa

Hi Teresa,
this is more or less a question of organizing your scenarios. Until now I could not experience any difference between "Party" and "Service w/o Party". We use "Service w/o Party" in all internal scenarios, meaning that no external partner is involved. If it comes to a scenario where we need to communicate with external partners then we place it under "Party". That's all about it. I also asked this question on the XI 3.0 education and the answer was the same....
Brgds
/Michael

Service with party and service without party

Hi all,
Can any body please suggest me when do we choose service with party and service without party?
We have a scenario where i need to use the webservices provided by the third party Java Based system. i am sure that i need to define Business service as technical details of the system are not available in the SLD. Please do correct me as i am configuring this scenario for the first time.
Any links related to a Web Blog / Thread would be great.
Thanks and best regards,
Kulwant Singh

hi
1.we go for service without party when we are having A2A communication.
A2A means application to application communication, it is used when two systems in same landscape try to communicate with each other. Systems in same landscape means both the systems are belongs to same organization or a company.
Normally in A2A communication sender and receiver is inside one organization and developer have freedom to define communication rules .
refers to link
http://help.sap.com/saphelp_nw04s/helpdata/en/66/58934257a5c96ae10000000a155106/content.htm
2.we go for service withparty when we are having B2B communication
B2B means Business to Business communication .It is used when there is exchange of information between two different Parties or companies or landscape.
When two applications in different companies communicates with each other we call it B2B Communication.
in case of B2B every party has it own rules which must be followed if we want to communicate between different organization.
refers to link
http://help.sap.com/saphelp_erp2004/helpdata/en/ca/efb540efe68631e10000000a1550b0/content.htm
rewardspoints if helpful
BR
Kasturika
Edited by: Kasturika Phukan on Feb 12, 2008 6:06 AM

Difference between a WEB service and a Enterprise Service?

Can Anybody explain me the difference between a WEB service and a Enterprise Service?

Hi Anilkumar K Naidu ,
Web service
A Web service is a self-contained, modularized functionality, which can be published, discovered, and accessed across a network using open standards and which is supported by SAP NetWeaver. Web services cover services provision for integration within an enterprise as well as cross enterprises on top of any communication technology stack, whether asynchronous or synchronous, in any format.
Web Services in the NetWeaver framework play an important role in facilitating the integration of disparate applications from various departments or trading partners and thus increasing business productivity. This benefit allows small and medium businesses also to integrate their business applications with larger trading partners. The benefit derived from this seamless integration introduces security concerns when all the business logic is now being exposed through a standard interface that is a catalyst for security vulnerabilities. SAP Security Managers must use automated diagnostics tools to ensure that the security vulnerabilities are caught in pre-production and in post-production phase.
Web Services Testing: SAP Netweaver Platform
http://www.crosschecknet.com/web_services_testing_SAP.php
How Web services play a key role on the SAP NetWeaver
http://www.sap.info/public/INT/int/index/Category-28943c61b1e60d84b-int/0/articlesVersions-500244687cbd30ffd
How to develop a Simple Web Service Application Using SAP NetWeaver Developer Studio & SAP XI 3.0
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5f3ee9d7-0901-0010-1096-f5b548ac1555
How To... Set Up a Web-Service Related Scenario with SAP xi
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/befdeb90-0201-0010-059b-f222711d10c0
Enhancing Your Web Services with SAP Exchange Infrastructure
http://www.sappro.com/downloads/SAPXI.pdf
Web Services, Part XI: Consuming Multiple Web Services
http://www.webreference.com/js/column106/
Vulneribility assesment of SAP Web Services
http://www.crosschecknet.com/resources/white_papers/sap_va.pdf
Enterprise Service
Enterprise Service-Oriented Architecture (Enterprise SOA)
Enterprise SOA is a blueprint for an adaptable, flexible, and open IT architecture for developing services-based, enterprise-scale business solutions. With SAP NetWeaver as a technical foundation, enterprise SOA moves IT architectures to higher levels of adaptability and moves companies closer to the vision of real-time enterprises by elevating Web services to an enterprise level.
An enterprise service is typically a series of Web services combined with business logic that can be accessed and used repeatedly to support a particular business process. Aggregating Web services into business-level enterprise services provides a more meaningful foundation for the task of automating enterprise-scale business scenarios.
SAP Enterprise Services Architecture
http://en.wikipedia.org/wiki/SAP_Enterprise_Services_Architecture
ENTERPRISE SERVICEORIENTED ARCHITECTURE DESIGN, EVELOPMENT,AND DEPLOYMENT
http://download.sap.com/platform/esoa/brochures/download.epd?context=FB8D5E235B637255604CD1EDB755014400C523BC4E4632245A59C838A212B5F04C71A43F8B38FC591628F4C698D8CAA859405AA974284758
Enabling Enterprise Services
http://help.sap.com/saphelp_nw04s/helpdata/en/80/be7042f1e6d242e10000000a1550b0/content.htm
Enterprise Service-Oriented Architecture
https://www.sdn.sap.com/irj/sdn/enterprisesoa
Define Enterprise Services using the Enterprise Services Community
https://www.sdn.sap.com/irj/sdn/define-es
Enterprise service bus
http://en.wikipedia.org/wiki/Enterprise_service_bus
Enterprise Services Workplace
http://erp.esworkplace.sap.com/socoview(bD1lbiZjPTgwMCZkPW1pbg==)/flddisplay.asp
cheers!
gyanaraj
****Pls reward points if u find this helpful

Difference between SOA and B1ISN

Hi all,
Can anybody tell me what is the difference between SOA and B1ISN ???
Thanks

Hi,
SOA, and more specifically eSOA, is a common service-oriented architecture / platform for SAP products. Partners can build business applications in .NET based around and on top of this new architecture for SAP Business One and other SAP / 3-rd party applications (one of the samples provided shows integration between SAP Business One and Outlook). You can find more information about eSOA [here|https://websmp108.sap-ag.de/~sapidb/011000358700001387112008E].
B1iSN is SAP's existing integration solution for integrating data between SAP Business One and SAP R/3. It is built on top of SAP's B1iP technology. Users can either develop custom content / scenarios by using the core B1iSN solution, or can develop totally new and distinct solutions using B1iP. You can find most information about B1iP in this forum.
In a more general sense, the answer to your question is that eSOA is a platform / architecture which allows the creation of integration solutions, while B1iSN is an existing solution built on top of B1iP.
HTH,
Dhruv

Difference between SPL and Embargo check

Hi,
What is the difference between Embargo and SPL screening.
Regards
Gaurav Jain

Hi Gaurav,
Embargo
An embargo is a government prohibition against the shipment of particular products to a particular country for economic or political reasons.
SAP Global Trade Services (SAP GTS) provides an embargo service that helps you manage import and export processes in global trade. The embargo service automatically checks whether there are any "critical" business partners contained in your customs document, that is, whether the business partners are in an embargo situation. If there is an embargo situation, the document is blocked for further processing. Essentially, the embargo service enables you to map all possible combinations of legal regulations using three functions in combination with one another
Sanctioned Party List Screening
A sanctioned party list contains a list of persons and companies with whom trade is prohibited by law. These boycott lists are issued by government agencies and can be obtained from data providers. All traders must comply with these lists.
Sanctioned party list screening lets you compare the addresses of your business partners (such as the consignee) with the sanctioned party lists automatically prior to goods export. It is a system-independent solution that performs and logs the SPL check and is fully integrated into the complete business process.
Hope this information helps
Regards,
Prarit
Edited by: Prarit Sehgal on Apr 2, 2009 2:05 AM

What's the difference between 45Wh and 54Wh battery?

Hi,
I was looking for a new battery for my MacBook Aluminum Unibody (Late 2008) and found that there are 45Wh and 54Wh battery. So what's the difference between 45Wh and 54Wh one at the same capacity? Will the 54Wh one offer a longer usage-time?
Thanks,
Nathan

aznjia wrote:
I wouldn't trust it. Even though the new battery is rated at 54 Watt hour but an apple battery may or may not run up to 1000 cycles. I looked the product reviews on amazon and I will go for what others said. However, Apple battery is designated to last about 700-1000 charge cycles but a battery over than 700 cycles. I am apple battery tech savvy. I would like to share my experience and provide sufficient answers to all the people in this forum.
I have no idea what you are trying to say. But I am NOT buying or recommending any 3rd party battery. Please read the post.

What are the differences between api and sdk

Hi,
Could anybody clarify for me what are the difference between API and SDK? I googled for the answer, and couldn't find any thing on this topic.
Many thanks in advance.
javasfan

Is it correct to say that "a SDK includes all the
APIs"? or "API sits on top of the SDK"?It's a bit weird to say either. First, the JDK doesn't include all APIs. Just the J2SE core API. Others, like 3rd party libraries or J2EE are not included. Second, if you mean the API docs, they're also not included IIRC.
It'd technically only be correct to say "the SDK provides an API", I guess. The example is very lame, but: if the SDK is a machine, the API is the sum of its buttons and levers and gauges and intakes and outlets and exhausts. The API docs are the manual.

Difference between forms6i and 10g

Is there a big Difference between forms6i and 10g? Can someone with 6i experience use forms 10g without problems?
Thanks

In our company Forms applications are still developed in 6i C/S, but they run without modifications, just recompilation, on
- 6i C/S (obviously :-))
- 6i Forms server
- 9i Forms services 9.0.2
- 10g Forms services 9.0.4
- 10g Forms services 10.1.2
We have customers with all these architectures on Linux and Windows, and they have DBs from 7.3.4 to 10g.

Difference between soa and esoa

Hi,
What is the difference between SOA AND ESOA.
Regards
Abhay

Hi
In a nutshell, ESOA are simply Web services that provide enterprise-level business functionality.They may range from very simple lookup services (like finding a companys location or product offerings) to more complex and composite services but what they have in common is that theyre highly integrated into your process or application.Typically ESOA are high-level components that take more granular Web services and aggregate them into reusable elements with business value. For example, take the service Cancel Purchase Order. An elementary Web service like Delete Purchase Order would simply lead to the deletion of a purchase order in the corresponding database. However, if the stated goal is cancel purchase order, the service has to become a more far-reaching enterprise service that handles this process end-to-end, and therefore has to trigger a number of follow-up actions, including:
=> Check against production orders
=> Check against a corresponding billing process
=> Update of inventory/warehouse information Or consider the Credit Limit Check
service, which at first glance seems to be quite simple. Normally, this service is one ingredient of the Order Creation service. But typically, credit checking is
really a more elaborate composite service.
5 Key Principles of ESOA
1. Abstraction hiding confusing details
2. Modularity breaking down complexity, resulting in reusable pieces
3. Standardized connectivity enabling flexible composition of services to
create bigger processes and scenarios
4. Loose coupling allowing for separate evolution of the various components
without breaking any points of integration
5. Incremental design enabling changes to composition and configuration
without affecting the interior of components, and vice versa
Regards,
Satyendra

What is the difference between "Replace" and "Replace by Security"

Hi all,
I am implementing FDM to Load data to HFM, I set them up with a proper security on the shared service and FDM. When I load data to HFM from FDM, there are 4 options to load data. (Replace, Merge, Accumulate, Replace by Security)
A document states that
Replace: Clears all account values from the target application, and replaces that the data in the application with the data in the load file.
Replace by Security: Loads data to the target application only for members to which you have access.
However, even if I used “Replace”, it worked with security which I set.
Does anyone know what the difference between “Replace” and “Replace by Security”?
Is there any way that FDM works without security?
Thanks in advance
taku

The fact both methods are producing the same results will either be coincidence or perhaps because you are mis-interpreting the difference between the 2. When you run a Replace HFM will clear out all data based on the combination of Scenario, Year, Period, Entity and Value dimensions it does not care if you have set up security classes which may restrict access to any of the other dimensions i.e. Account, Custom1 thru 4. When you use Replace By Security HFM will still clear on the original criteria but it will respect security class restrictions set up on the other dimensions e.g. if you are assigned to a security class which is restricted to accessing only a certain subset of accounts, HFM will not clear data fro the accounts you don't have access to when you use Replace By Security

What is the difference between tkprof and explainplan

Hi,
what is the difference between tkprof and explainplan.

Execution Plans and the EXPLAIN PLAN Statement
Before the database server can execute a SQL statement, Oracle must first parse the statement and develop an execution plan. The execution plan is a task list of sorts that decomposes a potentially complex SQL operation into a series of basic data access operations. For example, a query against the dept table might have an execution plan that consists of an index lookup on the deptno index, followed by a table access by ROWID.
The EXPLAIN PLAN statement allows you to submit a SQL statement to Oracle and have the database prepare the execution plan for the statement without actually executing it. The execution plan is made available to you in the form of rows inserted into a special table called a plan table. You may query the rows in the plan table using ordinary SELECT statements in order to see the steps of the execution plan for the statement you explained. You may keep multiple execution plans in the plan table by assigning each a unique statement_id. Or you may choose to delete the rows from the plan table after you are finished looking at the execution plan. You can also roll back an EXPLAIN PLAN statement in order to remove the execution plan from the plan table.
The EXPLAIN PLAN statement runs very quickly, even if the statement being explained is a query that might run for hours. This is because the statement is simply parsed and its execution plan saved into the plan table. The actual statement is never executed by EXPLAIN PLAN. Along these same lines, if the statement being explained includes bind variables, the variables never need to actually be bound. The values that would be bound are not relevant since the statement is not actually executed.
You don’t need any special system privileges in order to use the EXPLAIN PLAN statement. However, you do need to have INSERT privileges on the plan table, and you must have sufficient privileges to execute the statement you are trying to explain. The one difference is that in order to explain a statement that involves views, you must have privileges on all of the tables that make up the view. If you don’t, you’ll get an “ORA-01039: insufficient privileges on underlying objects of the view” error.
The columns that make up the plan table are as follows:
Name Null? Type
STATEMENT_ID VARCHAR2(30)
TIMESTAMP DATE
REMARKS VARCHAR2(80)
OPERATION VARCHAR2(30)
OPTIONS VARCHAR2(30)
OBJECT_NODE VARCHAR2(128)
OBJECT_OWNER VARCHAR2(30)
OBJECT_NAME VARCHAR2(30)
OBJECT_INSTANCE NUMBER(38)
OBJECT_TYPE VARCHAR2(30)
OPTIMIZER VARCHAR2(255)
SEARCH_COLUMNS NUMBER
ID NUMBER(38)
PARENT_ID NUMBER(38)
POSITION NUMBER(38)
COST NUMBER(38)
CARDINALITY NUMBER(38)
BYTES NUMBER(38)
OTHER_TAG VARCHAR2(255)
PARTITION_START VARCHAR2(255)
PARTITION_STOP VARCHAR2(255)
PARTITION_ID NUMBER(38)
OTHER LONG
DISTRIBUTION VARCHAR2(30)
There are other ways to view execution plans besides issuing the EXPLAIN PLAN statement and querying the plan table. SQL*Plus can automatically display an execution plan after each statement is executed. Also, there are many GUI tools available that allow you to click on a SQL statement in the shared pool and view its execution plan. In addition, TKPROF can optionally include execution plans in its reports as well.
Trace Files and the TKPROF Utility
TKPROF is a utility that you invoke at the operating system level in order to analyze SQL trace files and generate reports that present the trace information in a readable form. Although the details of how you invoke TKPROF vary from one platform to the next, Oracle Corporation provides TKPROF with all releases of the database and the basic functionality is the same on all platforms.
The term trace file may be a bit confusing. More recent releases of the database offer a product called Oracle Trace Collection Services. Also, Net8 is capable of generating trace files. SQL trace files are entirely different. SQL trace is a facility that you enable or disable for individual database sessions or for the entire instance as a whole. When SQL trace is enabled for a database session, the Oracle server process handling that session writes detailed information about all database calls and operations to a trace file. Special database events may be set in order to cause Oracle to write even more specific information—such as the values of bind variables—into the trace file.
SQL trace files are text files that, strictly speaking, are human readable. However, they are extremely verbose, repetitive, and cryptic. For example, if an application opens a cursor and fetches 1000 rows from the cursor one row at a time, there will be over 1000 separate entries in the trace file.
TKPROF is a program that you invoke at the operating system command prompt in order to reformat the trace file into a format that is much easier to comprehend. Each SQL statement is displayed in the report, along with counts of how many times it was parsed, executed, and fetched. CPU time, elapsed time, logical reads, physical reads, and rows processed are also reported, along with information about recursion level and misses in the library cache. TKPROF can also optionally include the execution plan for each SQL statement in the report, along with counts of how many rows were processed at each step of the execution plan.
The SQL statements can be listed in a TKPROF report in the order of how much resource they used, if desired. Also, recursive SQL statements issued by the SYS user to manage the data dictionary can be included or excluded, and TKPROF can write SQL statements from the traced session into a spool file.
How EXPLAIN PLAN and TKPROF Aid in the Application Tuning Process
EXPLAIN PLAN and TKPROF are valuable tools in the tuning process. Tuning at the application level typically yields the most dramatic results, and these two tools can help with the tuning in many different ways.
EXPLAIN PLAN and TKPROF allow you to proactively tune an application while it is in development. It is relatively easy to enable SQL trace, run an application in a test environment, run TKPROF on the trace file, and review the output to determine if application or schema changes are called for. EXPLAIN PLAN is handy for evaluating individual SQL statements.
By reviewing execution plans, you can also validate the scalability of an application. If the database operations are dependent upon full table scans of tables that could grow quite large, then there may be scalability problems ahead. On the other hand, if large tables are accessed via selective indexes, then scalability may not be a problem.
EXPLAIN PLAN and TKPROF may also be used in an existing production environment in order to zero in on resource intensive operations and get insights into how the code may be optimized. TKPROF can further be used to quantify the resources required by specific database operations or application functions.
EXPLAIN PLAN is also handy for estimating resource requirements in advance. Suppose you have an ad hoc reporting request against a very large database. Running queries through EXPLAIN PLAN will let you determine in advance if the queries are feasible or if they will be resource intensive and will take unacceptably long to run.

Difference between party and service without party

Similar Messages

Maybe you are looking for