Difference between petition red and no U no R in ERROR DTP

Hi experts,
I have created some ERROR DTP in some DTP that I execute in a process chain.
I Have a doubt now. I don't know exactly the difference between Valid records update, no reporting (Petition RED), and No update, no recording Options for "Update".
Wich do you reccomend to me? My goal is to save the correct ones and let the errors there to be manually revised, so I have set the DTP as Valid records update, reporting possible (Petition Green),
Thanks!!
Artur.

Hi Artur,
SAP excerpt -
On the Update tab page, specify how you want the system to respond to data records with errors:
     a.      No update, no reporting (default)
If errors occur, the system terminates the update of the entire data package. The request is not released for reporting. However, the system continues to check the records.
This means the data inside this request will not be visible in reports.
     b.      Update valid records, no reporting (request red)
This option allows you to update valid data. This data is only released for reporting after the administrator checks the incorrect records that have not been updated and manually releases the request by setting the overall status on the Status tab page in the monitor (QM action).
      c.      Update valid records, reporting possible
Valid records can be reported immediately. Automatic follow-up actions, such as adjusting the aggregates, are also carried out.
Wich do you reccomend to me? My goal is to save the correct ones and let the errors there to be manually revised, so I have set the DTP as Valid records update, reporting possible (Petition Green),
Your choice is correct
Hope it helps,
Best regards,
Sunmit.

Similar Messages

Differences between Ant launched and JDev launched JUnit causing an error

I've got a JUnit test which tests a web service. The test runs fine when launched in from JDeveloper but when launched from an Ant script I get:
[junit] oracle.fabric.common.PolicyEnforcementException: Action header is required when addressing is enforced
[junit] javax.xml.ws.WebServiceException: oracle.fabric.common.PolicyEnforcementException: Action header is required when addressing is enforced
[junit]      at oracle.j2ee.ws.client.jaxws.DispatchImpl.invoke(DispatchImpl.java:749)
[junit]      at oracle.j2ee.ws.client.jaxws.OracleDispatchImpl.synchronousInvocationWithRetry(OracleDispatchImpl.java:226)
[junit]      at oracle.j2ee.ws.client.jaxws.OracleDispatchImpl.invoke(OracleDispatchImpl.java:97)
[junit]      at oracle.j2ee.ws.client.jaxws.WsClientProxyInvocationHandler.invoke(WsClientProxyInvocationHandler.java:216)
[junit]      at $Proxy30.process(Unknown Source)
[junit]      at ca.jea.penfax.command.AddANewHireCommand.startBusinessProcess(AddANewHireCommand.java:30)
[junit]      at ca.jea.penfax.command.AddANewHireCommandTest.testStartBusinessProcess(AddANewHireCommandTest.java:27)
[junit] Caused by: oracle.fabric.common.PolicyEnforcementException: Action header is required when addressing is enforced
[junit]      at oracle.j2ee.ws.common.addressing.ClientWSAddressingInterceptor.processRequest(ClientWSAddressingInterceptor.java:166)
[junit]      at oracle.integration.platform.common.InterceptorChainImpl.processRequest(InterceptorChainImpl.java:91)
[junit]      at oracle.integration.platform.common.mgmt.InterceptorChainManager.processRequest(InterceptorChainManager.java:216)
[junit]      at oracle.j2ee.ws.client.mgmt.runtime.SuperClientInterceptorPipeline.handleRequest(SuperClientInterceptorPipeline.java:96)
[junit]      at oracle.j2ee.ws.client.jaxws.DispatchImpl.handleRequest(DispatchImpl.java:532)
[junit]      at oracle.j2ee.ws.client.jaxws.DispatchImpl.handleRequest(DispatchImpl.java:510)
[junit]      at oracle.j2ee.ws.client.jaxws.DispatchImpl.invoke(DispatchImpl.java:701)
The error occurs on the line that invokes the webservice. What parameters is JDeveloper setting up that I need to replicate in my Ant script? Is there a way to use the JDeveloper TestRunner instead if it will cause me fewer problems?

851004 wrote:
..It has been re-written from spec="1.0" to spec="1.5" ..Who changed it, and why?
..Does anybody else have an answer, solution, or suggestion ..?I suggest:
<ul>
<li>Change the spec. number back to something that 1.4 JWS claims to understand (i.e. "1.0").
<li>Checking the launch file using JaNeLA
</ul>
Edited by: Andrew Thompson on Apr 9, 2011 7:54 AM

What's difference between iphone 4 and 4s?

i bought an iphone 4 9months ago and the software was upgraded to iOS5 last month. since then i noticed that by the time i used to connect my iphone into my pc the itunes did not sync so i'd just tolerate as not a big deal for me... this is the problem that i have. yesterday evening, my iphone 4 was connected to my pc at the same downloading viber again from itunes at the moment i wanted to disconnect my iphone its dead! shut it off. i kept on switching evry10sec but there was no power. i knew there's enough battery as it connected in my pc. well, i gave up and leave it but 36hrs after when i'd tried again to switch on i saw on the lcd battery icon is red So i've charged immediately. now fine! i just want to share with you this experience... why its like this. Thanks there.

what's difference between iphone 4 and 4s?
Go here and see what's new: http://www.apple.com/iphone/

Difference between fixed focus and auto focus?

what is difference between fixed focus and auto focus and which is better?

Thanks for the advice Phonehacker, this Forum is so helpful on a variety of subjects, and the users are so patient, that's why I enjoy it so much My diet is now perfectly organised and my larder is full of Brown Bread and Red Wine
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

List of differences between PSE 40 and PSE30

A lot of users are asking what are the differences between PSE 30 and PSE 40.
This Thread provides information on this subject. First, you will find information copied from the section "New Features" of the useful "Adobe Photoshop Elements 4.0 User Guide". Then later on, you might find additional information on the same subject provided by users of PSE.
--- Start of copy of information in the PSE 4.0 User Guide ----
1 What's new in PSE 4.0
1.1 Editing and selection
1.1.1 Magic Selection Brush tool
Easily and accurately select portions of your photos using this new tool in either Standard Edit and Quick Fix. Simply scribble or place dots on the object you want to select -no need to precisely outline the object- and Adobe Photoshop Elements selects the object for you. You can add to or subtract from the selection by using additional tools in the options bar. (See User Guide "To use the Magic Selection Brush tool" on page 193.)
1.1.2 Magic Extractor.
Easily select an object in a photo and extract it from its background. Just scribble or place dots on
the object you want to extract; then scribble or place dots on the background, and Photoshop Elements separates the object from its background. This tool is perfect for creating composites or scrapbook images. (See User Guide "To use the Magic Extractor" on page 194.)
1.1.3 Skin tone adjustment
Click an area of skin and watch the tonal balance of all colors in the photo improve. If you
want, you can also manually adjust the color by using color sliders. (See User Guide "To adjust the color of skin tone" on page 224.)
1.1.4 Red eye removal
Automatically remove red eye during import, or select one or more files and easily remove red eye
in either the Organizer or the Editor. (See User Guide "To remove red eye" on page 249.)
1.1.5 Defringe
Automatically remove the colored specs or halo around the edges of a selection. (See User Guide "To defringe a Selection" on page 200.)
1.1.6 Straighten tool
Straighten and crop crooked photos by drawing a horizontal or vertical line in the image. Photoshop
Elements aligns the photo to that line. (See User Guide "To straighten an image" on page 243.)
1.1.7 WYSIWYG font menu
What you see is what you get -see what each font looks like from within the font menu. (See
User Guide "To choose a font family and style" on page 332.)
1.2 Sharing and printing
1.2.1 One-click printing (US, Canada, Japan only)
Order prints and professional hardbound photo books directly from Photoshop Elements simply by dragging the items to the Order Prints palette. (See User Guide "To use the Order Prints palette (US, Canada, Japan only)" on page 401.)
1.2.2 Slide shows on TV
If you have Windows¨ XP Media Center 2005 installed, you can view your Photoshop Elements
slide shows on your TV and navigate using your TV remote control. (See User Guide "To output a slide show" on page 354.)
1.3 Tagging and organizing
1.3.1 Face tagging
Select a group of photos and let Photoshop Elements isolate and display all the faces so that you can
quickly tag them. The Find Faces dialog box displays thumbnails of each face until you tag it. (See User Guide "To automatically find faces for tagging" on page 101.)
1.3.2 Search by metadata
Search for a variety of metadata criteria, such as file name, file type, shutter speed, camera
model, date, and tags. You can search on multiple criteria at once. (See User Guide "To find photos by details (metadata)" on page 89.)
1.3.3 PDF support
Manage and tag PDF files in the Organizer. PDF files remain intact as one file that you can tag. Open
the PDF in the Editor to extract individual pages. (See User Guide "To open a PDF file" on page 148.)
--- Continuation in next Post of this Thread ----

--- Continuation from previous Post -----
2 What's changed in PSE 4.0
2.1 Editing and selecting
2.1.1 Crop tool
Freely change image size boundaries while cropping an image. When you're happy with your crop marks,
click the Commit button , which is now conveniently located at the bottom right corner of the crop border. (See User Guide "To crop an image" on page 240.)
2.1.2 Paragraph text
Create paragraph text by dragging a border with the Text tool. The text you enter inside the border
wraps to remain inside the boundaries. (See User Guide "To add text" on page 329.)
2.1.3 Quick Fix
Use the newly enhanced automatic correction options for the most common photo flaws. (See User Guide "To correct color in Quick Fix" on page 207.)
2.1.4 Easier color management
Easily get the color you expect when printing. N ew options and improved embedded
profile support streamline color management. (See User Guide "About color management" on page 236.)
2.1.5 Advanced camera raw
Fine tune exposure and lighting by working with the raw data from your digital camera, and
easily export photos to the universal DNG format. (See User Guide "About camera raw image files" on page 159.)
2.1.6 Artifact reduction
Quickly remove noise caused by shooting in low light or with ISO camera settings by using the
new Remove JPEG Artifacts option in the Noise filter. (See User Guide "Reduce Noise" on page 289.)
2.2 Sharing and printing
2.2.1 Multimedia slide shows
Create feature-rich slide shows with all the new tools and options available in the Slide Show
Editor:
a) Gracefully move from one image to another by adding interesting transitions between each slide. You can choose from over 50 transitions, such as dissolves and doors. (See User Guide "To add and edit transitions" on page 352.)
b) Add text and graphics with the click of a button. (See User Guide "To add text to a slide" on page 348 and "To add clip art graphics to a slide" on page 347.)
c) Make your slide show feel more like a video by panning and zooming your slides. For instance, you can pan from a face on the left side of an image to a face on the right side of the image. (See User Guide "To set pan and zoom" on page 350.)
d) Add background music, make the duration of your slides match the duration of your audio, and narrate your slides all with the click of a button. (See User Guide "To add music to a slide show" on page 347 and "To add narration to a slide" on page 350.)
e) Quickly reorder or edit your slides without leaving the Slide Show Editor. (See User Guide "To reorder slides" on page 346.)
f) Preview anytime by clicking the Preview button, and then output your slide show by burning a DVD (if you have Adobe ' Premiere' Elements installed), sending it in e-mail, sharing it online, or sending it to your TV. (See User Guide "To output a slide show" on page 354.)
2.2.2 Photo mail
Turn plain e-mail into theme-based Photo Mail with enhanced and easier to use captions. (See User Guide "To send a photo using Photo Mail" on page 407.)
2.2.3 Desktop wallpaper
Create original desktop wallpaper using multiple photos. (See User Guide "To use photos as desktop
Wallpaper" on page 367.)
2.2.4 Creations
Create your own cards, calendars, and photo albums, and then print them on your printer, upload them
to the web, or burn them to CD. (See User Guide "About creations" on page 343.)
2.3 Viewing, tagging, and organizing
2.3.1 Faster download
Use the enhanced Photo Downloader to quickly download photos from your digital camera and
mobile phone, even when Photoshop Elements is not running. (See User Guide "To get photos from a digital camera or card reader" on page 62.)
2.3.2 Full Screen and Side By Side View
View your photos in full screen without the clutter of command menus and tools.
(See User Guide "Viewing photos at full screen or side-by-side" on page 76.)
2.3.3 Automatic organization and view options
View your photos as arranged automatically by date, or use the intuitive
Date View or the enhanced Folder Location view. (See User Guide "To sort files in the Photo Browser" on page 71.)
2.3.4 Address book
Import your addresses from Microsoft Outlook address book or vCards. (See User Guide "Using the contact Book" on page 404.)
2.3.5 Captions
Add captions to multiple photos at once. Open and edit audio captions by simply clicking the Audio
icon in thumbnail view in the Photo Browser. (See User Guide "To add captions to files" on page 123 and "To add audio to a photo" on page 124.)
--- End of Information Copied from the Adobe PSE 4.0 User Guide

What are the difference between 4.6c and 4.7 versions?

what are the difference between 4.6c and 4.7 versions?
if any please give me answer
regards
ramanji

Hi,
Upgrade SAP or Installation of SAP R/3 and ECC
What is ECC? Where to find the installation steps of ECC 5/6.0 with SQL as database and on windows platform with the steps including Solution Manager installation?
http://service.sap.com/instguides
ECC means Enterprise Central Component.
There are all the relevant installation guides. You NEED SAPNet access because without a registered and licensed SolMan installation number you will not be able to generate the SolMan key for the ECC installation.
Upgrade to 4.7
Have you gone through an upgrade to 4.7?
What are the difference or changes associated with 4.7.
If you are currently on 4.6C and are inching forward to upgrading to 4.7 then this information might be useful to you.
There is very little difference between 4.6 and 4.7, the only "steps" you should need are steps in SU25 ( skip step 1) Then go through all your role and perform a merge old new to bring in the new authorization objects
Just to forewarn you of a potential problem which have been encounter at the point of writing.
After updating/ modifying roles in step 2C, when going back into 2C to make sure all roles are now green, 70% have gone back to red!
The maintenance done is ok, but there seems to be a problem while trying to go back into the roles again to re-generate.
SAP recognizes them as needing "adjustment", so you cannot pick them up in mass generate in PFCG as they do not come in, even though the authorizations tab is red.
This problem is currently with SAP and it is confirmed that nothing have been done wrongly.
Generally, the work is quite manageable in the upgrade, but don't be surprised at how big the upgrade is when compared to upgrading from 46b to 46c.
If we have full software of 46c and 47E is it possible to upgrade 46c to 47E or there is a seperate 47E upgrade software need to be requested from SAP?
Where I can get the document with upgrade steps on the service market place?
It is of course possible and supported:
http://service.sap.com/inguides
--> SAP Components
--> SAP R/3 Enterprise
--> (choose your version)
at the bottom there is an "Upgrade guide" for Windows and Unix.
For Upgrades it is recommended to read ALL the notes mentioned in the
upgrade guide and to make sure one is using
- the correct version of the "tp" program
- the correct version of the "R3trans" program
- the correct version of the "R3up" program
All that is explained in the upgrade guide and in the corresponding notes.
If this is your first upgrade you should take a person, that has some experience on doing that for the first time.
Installation of SAP R/3
Currently we are going to install SAP on a new IBM server from the existing COMPAQ server. Where can I get the steps for that.
Configuration is :
   OS - windows 2003 server
   DB - Oracle 9i
   SAP 4.7
http://service.sap.com/instguides
--> SAP Components
--> SAP R/3 Enterprise
--> SAP R/3 Enterprise Core 4.70 / Ext. Set 2.00 (SR1)
--> Inst. Guide - R/3 Enterprise 4.7 x 2.00 SR1 on Win: Oracle
The above url is the SAP Service Marketplace with all the information you need to install, configure and run system. You need to be a valid licensed customer with a user ID and PASSWORD to use that.
Without access you won't be able to successfully run any SAP systems because it has notes, patches etc.

Quality difference between S-video and RCA

Can someone tell me what's the difference (in quality) between S-video out and RCA out?
I'm using RCA out because with s-video, the image shows up in black and white on my TV.
It would help to know I'm not loosing too much quality this way...
Regards everyone.

pauliewog is speechless
But what Robi says is true!
The various forms of (analogue) signal transfer are, in descending order of quality:
RGB - The Red, Green and Blue signals are generated by the PC (say), and connected by separate wires to ultimately control the Red, Green and Blue electron guns of the display monitor/TV set. The standard 15-pin "VGA" connector is RGB (plus H and V synchronising pulses).
YUV - Also called Component, and YCrCb, as found on DVD players. The Y is the luminance, or Black-and-White component, while the Cr and Cb are the Differences between the Y and the Red and Blue signals respectively. Usually, the Y signal has higher bandwidth than the Cr and Cb signals (twice as many Y samples as Cr and Cb samples on the DVD). Still needs wires, but the Sync is added to the Y signal.
Y/C - aka S-Video. The Y is as above, but the Cr and Cb signals are used to modulate a subcarrier (3.579545MHz for NTSC, 4.43361875MHz for PAL), with one of the signals effectively at 90 degrees to the other - the C signal. The bandwidths of the colour difference signals need to be bandwidth limited to about 1/3 of the subcarrier frequency (about 1.7MHz for PAL from memory), compared to the Y bandwidth of 5MHz for broadcast television. In PAL, the phase of one of the signals is inverted every other line (PAL = Phase Alternating Line, aka Peace At Last). Transmission errors which result in green faces and purple trees in NTSC (National Television Standards Commitee, aka Never Twice the Same Colour) tend to desaturate the colours instead.
CVBS, aka Composite Video (also RCA, named after the company that developed the type of connector used, which is typically yellow for video). The Y and C (and sync) signals are combined one one wire. The TV has a harder job of separating them back to RGB :(
RF (Radio Frequency). The CVBS signal is modulated onto an RF carrier, which could be anywhere between about 45MHz and about 1000MHz (not counting satellite distribution), so that it looks the same as a broadcast TV station to a TV set, and connects via a single cable to the antenna socket of a TV set. So first the TV has to demodulate the signal back to CVBS, before separating the Y and C, then separating the C into Cr and Cb and putting into a matrix with the Y to get RGB back. Nevertheless, this is a useful technique for distributing a signal to a lot of TV sets over a reasonably large area. It is also the only method that works with old TVs without A/V inputs - which is why game consoles used to come with an RF Modulator (aka RF Converter) as standard.
The above methods are also in descending order of signal bandwidth, which restricts the available resolution, or the finest horizontal detail (especially colour detail). Generally, 800x600 is about as good a resolution as you can expect to get on a TV display without resorting to special enhancing techniques.
The above is probably a lot more detail than you need, but is still a fairly superficial explanation. But study it up, the test is next Monday at 9am :D
Cheers

What is difference between sy-tabix and sy-index.

SAP Seniors,
Can you please let me know what is difference between sy-index and sy-tabix.
I read the SAP help, it is confusing for me. it looks like both are same from help. please help me.
Thank you
Anitha.

HI,
Here is a brief description of difference between SY_TABIX and SY_INDEX and using them with several conditions.
SY-TABIX
Current line of an internal table. SY-TABIX is set by the statements below, but only for index tables. The field is either not set or is set to 0 for hashed tables.
APPEND sets SY-TABIX to the index of the last line of the table, that is, it contains the overall number of entries in the table.
COLLECT sets SY-TABIX to the index of the existing or inserted line in the table. If the table has the type HASHED TABLE, SY-TABIX is set to 0.
LOOP AT sets SY-TABIX to the index of the current line at the beginning of each loop lass. At the end of the loop, SY-TABIX is reset to the value that it had before entering the loop. It is set to 0 if the table has the type HASHED TABLE.
READ TABLE sets SY-TABIX to the index of the table line read. If you use a binary search, and the system does not find a line, SY-TABIX contains the total number of lines, or one more than the total number of lines. SY-INDEX is undefined if a linear search fails to return an entry.
SEARCH <itab> FOR sets SY-TABIX to the index of the table line in which the search string is found.
SY-INDEX
In a DO or WHILE loop, SY-INDEX contains the number of loop passes including the current pass.
Hope this helps.
Thank you,
Pavan.

Difference between sy-tabix and sy-index?

tell me about sy-tabix and sy-index?what is the difference between sy-tabix and sy-index?
Moderator Message: Please search before posting. Read the [Forum Rules Of Engagement |https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement] for further details.
Edited by: Suhas Saha on Jun 18, 2011 5:33 PM

HI,
Here is a brief description of difference between SY_TABIX and SY_INDEX and using them with several conditions.
SY-TABIX
Current line of an internal table. SY-TABIX is set by the statements below, but only for index tables. The field is either not set or is set to 0 for hashed tables.
APPEND sets SY-TABIX to the index of the last line of the table, that is, it contains the overall number of entries in the table.
COLLECT sets SY-TABIX to the index of the existing or inserted line in the table. If the table has the type HASHED TABLE, SY-TABIX is set to 0.
LOOP AT sets SY-TABIX to the index of the current line at the beginning of each loop lass. At the end of the loop, SY-TABIX is reset to the value that it had before entering the loop. It is set to 0 if the table has the type HASHED TABLE.
READ TABLE sets SY-TABIX to the index of the table line read. If you use a binary search, and the system does not find a line, SY-TABIX contains the total number of lines, or one more than the total number of lines. SY-INDEX is undefined if a linear search fails to return an entry.
SEARCH <itab> FOR sets SY-TABIX to the index of the table line in which the search string is found.
SY-INDEX
In a DO or WHILE loop, SY-INDEX contains the number of loop passes including the current pass.
Hope this helps.
Thank you,
Pavan.

What is difference between sy-index and sy-tabix and where both are using ?

what is difference between sy-index and sy-tabix and where both are using ?

hi nagaraju
sy-tabix is in Internal table, current line index. So it can only be used while looping at the internal table.
sy-index is in Loops, number of current pass. This you can use in other loop statements also (like do-enddo loop, while-endwhile)
SY-INDEX is a counter for following loops: do...enddo, while..endwhile
SY-TABIX is a counter for LOOP...ENDLOOP, READ TABLE...
Here is an example from which you can understand the difference between sy-tabix and sy-index.
Itab is an internal table with the following data in it.
id Name
198 XYZ
475 ABC
545 PQR.
loop at itab where id > 300.
write :/ itab-id, itab-name , sy-tabix, sy-index.
endloop.
My output will be :
475 ABC 2 1
545 PQR 3 2
Sy-tabix is the index of the record in internal table.
sy-index gives the no of times of loop passes.
So, for the first record in the output (475 ABC), 2 is the index of the record in internal table and as it is first time loop pass occured, sy-index value is 1.
Regards,
navjot
award points

The difference between chapter markers and dvd studio pro markers

Does anyone know what is the difference between chapter markers and dvd studio pro markers? I can not find anywhere on Google. Also in the tutorials I have seen, suggesting DVD Studio Pro markers, but it did not mention the chapter markers.
Thanks,

"Adding Chapter and Compression Markers to Your Sequence
Once you have your edited sequence or program finished, you can add markers to the sequence for use on DVD. Markers are reference points you can place within clips or sequences that identify specific frames. There are two kinds of markers you can add that directly relate to authoring a DVD—chapter markers and compression markers.
• Chapter markers allow DVD authoring applications to create a navigable chapter list for your exported QuickTime movie. Chapter markers force MPEG keyframes (known as I-frames) at their location, since the DVD specification requires an I-frame at each chapter point.
• Compression markers identify areas of abrupt change and include two types: those that are automatically inserted by Final Cut Pro at all edit points, and those you manually place in the clip or sequence. Like chapter markers, compression markers force I-frames at their location, although in this case it is for better quality encoding, and they are not used to create a chapter list.
Note: When you export a QuickTime movie, you have an option to export various kinds of markers, including compression, chapter, or DVD Studio Pro markers. *When you choose to export DVD Studio Pro markers, Final Cut Pro actually exports chapter markers and all compression markers.* This includes compression markers you set manually, as well as ones created automatically by Final Cut Pro at edit and transition points."
From the Final Cut Pro User Manual.
So, JS was right the first time

The difference between an iphone and an ipod touch?

i want to know if the difference between an iphone and an ipod touch is just that the iphone is like a phone that has internet and is a phone. or what else is it?

The iPhone includes the same as an iPod Touch but also includes a phone, a camera, and a GPS radio.
In addition to having internet access via wi-fi, the iPhone also has internet access via the cellular network, so as long as you have cellular reception with the iPhone, you have access to the internet in addition to having access via an available wi-fi network.

The difference between system restore and last good known configuration

hi,
what is the difference between system restore and last good known configuration.
in which situation you use system restore ,and in which situation you use last good known configuration.
very short answer wil be enough.
thanks
johan
h.david

Last Known Good Configuration deals only with Starting Windows eg. a bad registry or incorrect driver is preventing Windows to start.It recovers the registry settings of HKEY_LOCAL_MACHINE\System\CurrentControlSet
While System Restore uses restore points to return your system files and settings to an earlier point in time without affecting personal files. Restore points are created automatically every week, and just before significant system events, such as the installation
of a program or device driver. You can also create a restore point manually.You can undone system restore but there is no such option in Last Known Good Configuration.
Last Known Good Configuration is disabled in Windows 8 or,Windows 8.1 by default.
Try using Last Known Good Configuration if you can't start Windows, but it started correctly the last time you turned on the computer.
Try using System Restore to return the system to an earlier point in time when things worked correctly.
S.Sengupta, Windows Entertainment and Connected Home MVP

Difference between sy-datum and any given date

Dear Friends;
I have one query regarding DATE I wanna calculate the difference between
SY-DATUM and ANY GIVEN DATE . Is there any function or code available that take one parameter as sy-datum and another parameter as any given date and give result as no. of days between them
Regards;
Parag

DATA: DATEDIFF TYPE P.
CALL FUNCTION 'SD_DATETIME_DIFFERENCE'
EXPORTING
    date1                 = '20071122'
    time1                 = '000001'
    date2                 = '20070905'
    time2                 = '000001'
IMPORTING
   DATEDIFF               = DATEDIFF
EXCEPTIONS
   INVALID_DATETIME       = 1
   OTHERS                 = 2.
Greetings,
Blag.

Difference between sy-uline and uline

Hi All,
Any one of you please update me what is the difference between sy-uline and uline. Also when i give sy-uline in top-of-page event it gives error.
Thanks
sankar

with ULINE u can specify the position from where the ULINE should start
corresponds to WRITE AT 3(10) SY-ULINE.
ULINE AT 3(10) NO-GAP will supress the spacess after the under line
ex : 1
uline at 4(10).
write : / 'My Program'.
uline at 4(10).
ex : 2
write : 'My Program' , sy-uline.

Difference between petition red and no U no R in ERROR DTP

Similar Messages

Maybe you are looking for