Difference between pick qty and delivery qty

Hi,
My delivery qty is 5 pcs. However while making transfer order from within delivery, the Transfer order is being made automatcially for 17 pcs and so the pick qty is 17 pcs. Due to the differenc ein delivery qty and pick qty, I cannot do PGI in the delivery.
When I use LT0G, and give the delivery and warehouse no and movement type 999, the system does not allow the transaction and gives a message that, function not yet supported for Handling units. But I do not have handling units in my delivery. Neither the system allows me to cnacel the Transfer order thru LT15.
How to correct the above situation so that the TO does not pick up the qty greater than the delivery qty or what other alternatives are there. Also how to ensure that TO is made of qty which is equal to delivery qty.
Iam not aware of WM module, so kindlyu tell in detial pls.
regards
sachin

In IMG>LE>WM>Master Data> Define storage type.
Check In stock removal control whether "Full stock removal reqmt act" is active.
If this is active it will try to pull the total quant irrespective of your requirement.
Reward if useful.
Regards
EDWIN.

Similar Messages

Difference between open quantity and delivery quantity

Hi all,
Please anybody explain me the difference between open quantity and delivery quantity My question is both are same in the value or different I need to report these 2 fields based on date.
open quantity is available in table vbbe
delivery quantity available in table lips.
for open quantity i have one select statement.
for delivery quantity i have another select statement.
i want to club these 2 fields into a single report.
please clarify my doubt.
regards
chandu

Hi,
Open quantity is nothing but the quantity which we have at the DAY starts.
Delivered quantity means which was delivered on that DAY.
So Opening qty - Delivered qty = Closing qty for a DAY.
Again this Closing qty will be the Opening qty for next DAY.
I think based on POSNR u need to club both the quantity in single report.
select vbeln posnr matnr omeng mbdat into itab from VBBE where....
select vbeln posnr matnr lfimg mbdat into itab1 from lips where....
loop at itab.
read table itab1 with key....
move:....to itab2.
endloop.
Thanks.
I hope this will help you.
Message was edited by: Deepak333 k
Message was edited by: Deepak333 k

Difference between Scheduling lines and Delivery schedule

Hi SD Experts
can u say me the clear difference between Scheduling lines and Delivery schedule.
where we will maintain deliver schedule. whether delivery schedule is automatically created along scheduling agreements..
with regards
James

Hi James,
Schedule Lines: Has basically information realted to delivery scheduling in Sales Order level.
Delivery Scheduling: Is a process using which system will determine what are the different activities which need to be performed and time taken for each activitiy only after which the material can be delivered to the customer.
Delievry scheduling will be started only from the material availability date i.e., system will first determine the material avail date and then do scheduling. By default Standard SAP system does Backward Scheduling in case material availability falls beyond the required delivery date system will do forward schedluing
Delivery Scheduling consists of the following Basic activities:
We give deatils while creating order:
Order Creation Date
Required Delivery Date
Order date - Material availability date - Transportation Planning Date - Loading date - Goods Issue Date - Required Delivery Date
Time Between GI Date and required Delivery Date is called Transit Time
Time Between LoadingDate and GI Date is called Loading time
Time Between Material Availability Date and Loading Date consists of 2 components - Pick / PackTime and Transportation Planning Time
System has to calculate all this before it determines the confirmed delivery date.
Give your mail Id I have some Presentation I will send you across.
REWARD POINTS IF IT HELPS
Regards
Srini

What is the difference between scheduling agreement and delivery schedule

Hi
1. Can anyone explain me the difference between scheduling agreement output
    and scheduling agreement delivey schedule
    Will the both look same in T.code SP02 when seeing the output for a document.
    Can anyone send me T.codes for above ones in purchasing.
2. when seeing the Detailed statement for rebate agreement,there is item number.
    In which table can we see the item number for rebate agreement

Hi,
If you have to deal with more complex situations, you can define a delivery cycle in the material master record in addition to the planning cycle. In so doing, you determine the days on whichthe vendor delivers his goods. The delivery cycle is entered in the material master record as a planning calendar in the Planning calendar field.
You enter a delivery cycle if the delivery date (or the goods receipt date) depends on the day on which you order the goods. For example, you carry out the planning run and place your orders on Mondays and Tuesdays. If you place the order on Monday, the delivery is made on Wednesday, if you wait until Tuesday to place the order, the delivery is not made until Friday
Where as Planning calander is Three character number (numeric or using letters) that specifically identifies a PPS-planning calendar. The difference between Planning calender and delivery cycle is If you have selected the MRP type "MRP" and have set a period lot-sizing procedure according to planning calendar, you enter here which planning calendar is to be used.
If you selected the "time-phased planning" MRP type, the planning calendar that you specify here defines the delivery cycle. This specifies the days on which the vendor delivers the material. You can enter the planning cycle in addition to the delivery cycle

What is the difference between Planning cycle and Delivery cycle?

Hi gurus ,
After created the planning calendar for store , I have the same option value for planning cycle and delivery cycle (planning calendar) in the MRP area data for site specific material master , so what's the difference between these two field ?
Thanks in advance ,
Ryan

Hi,
If you have to deal with more complex situations, you can define a delivery cycle in the material master record in addition to the planning cycle. In so doing, you determine the days on whichthe vendor delivers his goods. The delivery cycle is entered in the material master record as a planning calendar in the Planning calendar field.
You enter a delivery cycle if the delivery date (or the goods receipt date) depends on the day on which you order the goods. For example, you carry out the planning run and place your orders on Mondays and Tuesdays. If you place the order on Monday, the delivery is made on Wednesday, if you wait until Tuesday to place the order, the delivery is not made until Friday
Where as Planning calander is Three character number (numeric or using letters) that specifically identifies a PPS-planning calendar. The difference between Planning calender and delivery cycle is If you have selected the MRP type "MRP" and have set a period lot-sizing procedure according to planning calendar, you enter here which planning calendar is to be used.
If you selected the "time-phased planning" MRP type, the planning calendar that you specify here defines the delivery cycle. This specifies the days on which the vendor delivers the material. You can enter the planning cycle in addition to the delivery cycle

Difference between Data Class and Delivery Class

What is the Difference between Data Class and Delivery Class , what happens Phisically to the Data .
Moderator message: what is the difference between your question and a question that we'd welcome here in the forums?
[Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
Edited by: Thomas Zloch on Nov 22, 2010 1:17 PM

What is the Difference between Data Class and Delivery Class , what happens Phisically to the Data .
Moderator message: what is the difference between your question and a question that we'd welcome here in the forums?
[Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
Edited by: Thomas Zloch on Nov 22, 2010 1:17 PM

What is the difference between pick order and TO ?

Hello Gurus,
What is the difference between pick order and TO ? Can anybody throw some light on this?
Any document ..any link please share.
Helpful answers Dont offer any rewards
Thanks,
Nilesh
Edited by: Lakshmipathi on Dec 15, 2010 8:35 PM

Hello Nilesh,
Do you want the forum experts to do the search for you?
Please search the forum before creating a new thread...
Please refer here:
difference between picking request and transfer order
Hope this clarifies...
Thanks,
Jignesh Mehta

What is the difference between Planning calendar and Delivery cycle?

Hi gurus ,
For the Planning calendar(MARC-LFRHY) and Delivery cycle(MARC-MRPPP), what is the difference between their functionality ?
I have created the planning calendar by MD25 ,and when I maintain this field in the MRP screen , i found the delivery cycle have the same choose value , so could you make me clear about this ?
Thanks in advance .
Ryan

Hi,
If you have to deal with more complex situations, you can define a delivery cycle in the material master record in addition to the planning cycle. In so doing, you determine the days on whichthe vendor delivers his goods. The delivery cycle is entered in the material master record as a planning calendar in the Planning calendar field.
You enter a delivery cycle if the delivery date (or the goods receipt date) depends on the day on which you order the goods. For example, you carry out the planning run and place your orders on Mondays and Tuesdays. If you place the order on Monday, the delivery is made on Wednesday, if you wait until Tuesday to place the order, the delivery is not made until Friday
Where as Planning calander is Three character number (numeric or using letters) that specifically identifies a PPS-planning calendar. The difference between Planning calender and delivery cycle is If you have selected the MRP type "MRP" and have set a period lot-sizing procedure according to planning calendar, you enter here which planning calendar is to be used.
If you selected the "time-phased planning" MRP type, the planning calendar that you specify here defines the delivery cycle. This specifies the days on which the vendor delivers the material. You can enter the planning cycle in addition to the delivery cycle

Problem in FM:WS_DELIVERY_UPDATE to change picked qty and delivery qty

Dear friends.
i am trying to chande picked and del qty's through above fm.
i am getting an error message like this:
(Required field in interface to delivery update missing 0080000155 000010
VBELN 000000            Message no. VL280 )
i am pasing all requires parameters.
please help me if any thing is missed..........
here i am giving my code:
DATA:i_vbeln TYPE vbeln,
     i_posnr TYPE posnr,
     i_new_delqty TYPE lips-lfimg,
     wa_lips LIKE lips OCCURS 0 WITH HEADER LINE,
     wa_likp TYPE likp.
i_vbeln = '0080000155'.
i_posnr = '000010'.
i_new_delqty = '30'.
SELECT SINGLE * INTO wa_likp
                FROM likp
                WHERE vbeln = i_vbeln.
SELECT SINGLE * INTO wa_lips
                FROM lips
                WHERE vbeln = i_vbeln
                AND posnr = i_posnr.
DATA:gs_vbkok LIKE vbkok,
      gt_vbpok LIKE vbpok OCCURS 0 WITH HEADER LINE,
      gt_prott LIKE prott OCCURS 0 WITH HEADER LINE,
      gs_prott LIKE prott.
DATA:xfeld1 TYPE xfeld,
     xfeld2 TYPE xfeld,
     xfeld3 TYPE xfeld,
     xfeld4 TYPE xfeld,
     xfeld5 TYPE xfeld,
     xfeld6 TYPE xfeld,
     xfeld7 TYPE xfeld,
     xfeld8 TYPE xfeld.
gs_vbkok-vbeln_vl = i_vbeln.
gs_vbkok-vbeln = i_vbeln.
gs_vbkok-brgew = wa_lips-brgew.
gs_vbkok-kzbrg = 'X'.
gs_vbkok-kzntg = 'X'.
gs_vbkok-vbtyp_vl   = wa_likp-vbtyp.
gs_vbkok-ntgew = wa_likp-ntgew.
gs_vbkok-gewei = wa_likp-gewei.
gs_vbkok-lgnum = wa_likp-lgnum.
gs_vbkok-kodat =   wa_likp-kodat.
gs_vbkok-KOMUE   = 'X'.
*gs_vbkok-   = WA_LIKP-
*gs_vbkok-   = WA_LIKP-
*gs_vbkok-    = WA_LIKP-
gt_vbpok-vbeln_vl = i_vbeln.
gt_vbpok-posnr_vl = i_posnr.
gt_vbpok-matnr = wa_lips-matnr.
gt_vbpok-charg = wa_lips-charg.
gt_vbpok-lianp = 'X'.
gt_vbpok-kzntg = 'X'.
gt_vbpok-kzbrg = 'X'.
gt_vbpok-lfimg = i_new_delqty.
gt_vbpok-lgmng = i_new_delqty.
gt_vbpok-umvkz = wa_lips-umvkz.
gt_vbpok-umvkn = wa_lips-umvkn.
gt_vbpok-TAQUI = 'X'.
gt_vbpok-brgew = wa_lips-brgew.
gt_vbpok-ntgew = wa_lips-ntgew.
gt_vbpok-gewei = wa_lips-gewei.
gt_vbpok-vrkme = wa_lips-vrkme.
gt_vbpok-meins = wa_lips-meins.
gt_vbpok-VOLUM = wa_lips-VOLUM.
gt_vbpok-VOLEH = wa_lips-VOLEH.
gt_vbpok-vbeln = wa_lips-KDAUF.
gt_vbpok-posnn = wa_lips-KDPOS.
*gt_vbpok-vbeln = wa_lips-vbelv.
*gt_vbpok-posnn = wa_lips-posnv.
gt_vbpok-umrev = wa_lips-umrev.
gt_vbpok-vbtyp_n = wa_lips-vbtyv.
gt_vbpok-werks = wa_lips-werks.
gt_vbpok-pstyv = wa_lips-pstyv.
gt_vbpok-ormng = '15'.
gt_vbpok-ndifm = '15'.
gt_vbpok-orpos = i_posnr.
gt_vbpok-pikmg = '1'.
gt_vbpok-SPE_DLV_QTY_FROM = i_new_delqty.
APPEND gt_vbpok ."TO gt_vbkok.
gt_prott-vbeln = i_vbeln.
gt_prott-posnr = i_posnr.
gt_prott-matnr = wa_lips-matnr.
gt_prott-vrkme = wa_lips-vrkme.
gt_prott-lfimg = i_new_delqty.
gt_prott-vrkme = wa_lips-vrkme.
APPEND gt_prott." TO gt_prott.
BREAK-POINT.
CALL FUNCTION 'WS_DELIVERY_UPDATE'
EXPORTING
    vbkok_wa                           = gs_vbkok
   synchron                           = 'X'
   no_messages_update                 = ' '
   commit                             = 'X'
    delivery                           = i_vbeln
   update_picking                     = 'X'
nicht_sperren                      = ' '
if_confirm_central                 = 'X'
if_wmpp                            = 'X'
if_get_delivery_buffered           = 'X'
if_no_generic_system_service       = 'X'
   if_database_update                 = '3'
if_no_init                         = ' '
if_no_read                         = ' '
   if_error_messages_send_0           = 'X'
if_no_buffer_refresh               = 'X'
it_partner_update                  = ' '
it_sernr_update                    = ' '
if_no_remote_chg                   = ' '
if_no_mes_upd_pack                 = ' '
if_late_delivery_upd               = ' '
IMPORTING
   ef_error_any_0                     = xfeld1
   ef_error_in_item_deletion_0        = xfeld2
   ef_error_in_pod_update_0           = xfeld3
   ef_error_in_interface_0            = xfeld4
   ef_error_in_goods_issue_0          = xfeld5
   ef_error_in_final_check_0          = xfeld6
   ef_error_partner_update            = xfeld7
   ef_error_sernr_update              = xfeld8
TABLES
   vbpok_tab                          = gt_vbpok
   prot                               = gt_prott
VERKO_TAB                          =
VERPO_TAB                          =
VBSUPCON_TAB                       =
IT_VERPO_SERNR                     =
IT_PACKING                         =
IT_PACKING_SERNR                   =
IT_REPACK                          =
IT_HANDLING_UNITS                  =
IT_OBJECTS                         =
ET_CREATED_HUS                     =
TVPOD_TAB                          =
IT_TMSTMP                          =
IT_BAPIADDR1                       =
SERNR_TAB                          =
IT_HURES                           =

Hi,
Thanks for the repl
i also passed..
vbeln_vl,
posnr_vl,
vbeln,
posnn
Still not working...any other info to pass to FM
Regards,
Raj

What is the difference between developement system and delivery system?

Hello Experts,
I have some questions regarding publishing the content on delivery system.
Could some one help me.
1) Can we use Development System as Delivery System?
2) Can we Publish a Site into Development System?
3) How to check whether the installation done in development mode or in delivery mode? I mean do we have any procedure to check ?
4) What are the Advantages of Delivery System over the Development System?
Note: I installed Webcenter sites11gR1 on Weblogic10.3 server and windows 7.
Thanks in advance
Rajendar.

Rajendar Raj wrote:
I got the answers.
1) Can we use Development System as Delivery System?
Ans:
Yes, a development system contains the same functionality as a delivery system. Conversely a delivery system doesn't have a contributor interface so it cannot be used for managing assets.
Not recommended and it also depends on the sizing of your environment and tuning. Delivery systems usually are architected with performance in mind, depending on the expected load, logs are minimal and usually Remote Satellite Servers are added. Important as well is that no content or any assets is created directly on the delivery system, you might run into unique ID constrains when you publish content from Authoring to Delivery, in your case Development.
2) Can we Publish a Site into Development System?
Ans:
Yes, you can.
Be careful this is not recommended, you can run into unique id constraints issues
3) How to check whether the installation done in development mode or in delivery mode? I mean do we have any procedure to check ?
Ans:
Look in the ominstallinfo directory, in the location where WebCenter Sites was installed. there is a file called omii.ini that contains installation-time choices and parameters. Look for the parameter "Development"
- true, indicates it was a Development type install. Advanced UI will be available, as will the Contributor UI
- false, indicates it was a Delivery type install. Only Advanced UI will be available.
4) What are the Advantages of Delivery System over the Development System?
Ans:
A delivery type install is more secure, as the contributor UI and some other editorial components are not installed. It also prevents editors from changing content on the delivery system by mistake.
In general Delivery systems are architected different, more emphasis on performance, caching and security.
Thanks and Regards
Rajendar.Regards,
Rodney

Difference between confirmation cancellation and return delivery

Dear Gurus,
can you explain to me the difference between confirmation cancellation and return delivery in terms of processes and impact on ECC postings?
Thank you in advance for your collaboration,
Fuffo
Edited by: Fuffo Fuffi on Dec 21, 2010 2:36 PM

Hi
Confirmation Cancellation --> is used for reversing a confirmation which is posted wrongly in the system. This is generally used for reversing a faulty transaction.
Return Delivery --> is used for sending the goods back to vendor. This happens when we receive goods from vendor and for some reasons the delivery does not meet customer's specification due to any reason. In these cases you record the goods movement as Return delivery sent back to Vendors.
Regards
Virender Singh

Difference between subsequent adjustment and return delivery ...?

Dear all ,
Provide difference between subsequent adjustment and return delivery ...?
sri....

Hi,
Subsequent delivery means you have to reverse the goods receipts after
entering corresponding invoice and you want to post another goods receipt
than use subsequent delivery in MIGO with reference to old goods receipt
number.
Subsequent adjustment means updating the price difference in the quantity
already supplied.
Ex: Original invoice price is 100 for quantity of
10 nou2019s, i.e., Invoice amount is 1000 after doing MIRO for amount
1000 you get another supplementary Invoice for amount
100 towards price revision. In this case you have to adjust through subsequent
adjustment.
If your question was on posting logic for alternative posting of exchange rate differences. then,
Subsequent adjustment*
When you make a subsequent adjustment, the system posts all values with the exchange rate at the time of the goods receipt.
Return Delivery
If there is a return delivery, the posting date is based on the time of the goods receipts. The system converts the stock value using the average exchange rate with reference to the purchase order.
Regards,
Sadiq.

Return material- difference between MIGO(Returndelivery) and MIGO(GR -PO)

Hi friends,
What is the difference between the MIGO(Return delivery against material document) and MIGO( Goods Receipt against purchase order).
SAP Best Practice for Return material to vendor is to create return PO,MIGO against PO and perform credit Memo,if invoice received against PO.
What is the use/purpose of MIGO(Return delivery against Material Document) and MIGO( Goods Receipt against return PO)
Thanks

If the vendor is picking the return goods than you can retrurn agianst the materal document but if you are liable to return the goods than you can use return Po so the same qty will get opend in the main po and you can use the shipping functionality also.
e.g. if you have to pick, pack and ship.

I need to display a Report which contain -- del QTY and INV QTY in one

Hi ALL,
I need to display a Report which contain
<b>Customer , Material , Order No, Delivery No, Billing No , Order Qty , Dev Qty, Bill Qty , Invoiced Qty and There Values in One Line .</b>
How can I Display, When I am executing the report against the Delivery Number Bill Qty and Invoiced Qty is showing Hash ( # ).
Do I need to right any Routines for this, if I am correct, where I have to write that code and what is the code ,
What are the Consolidation routines ?????
I am working on BI 7.
Regards ,
Shaik
Message was edited by:
shaik

Frst check in backend, which all cubes have got data for each of three..
Corresponding you can go ahead with Multi/Infoset..
Look for reference no in all three cubes and pick one order and track tht by reference no in all cubes,
Hope it helps..
Thanks for points assigned

Link between Schedule lines and delivery quantity

Hi all,
At the item level in a sales order, can anyone tell me the link between schedule line data and delivered quantity.
Schedule line data can be found in VBEP and delivery qty can be found in LIPS. But I want the link between the two. For which partcular date in the schedule line item the delivery qty is displayed.
Thanks in advance.

Hi Amol and Rahul,
Actually I dont want the link between sale order and delivery, I want the link between schedule line dates and delivery qty.
Hope I am clear.
Thanks in advance.
Edited by: Rajini R M on Sep 11, 2008 6:12 AM

Difference between pick qty and delivery qty

Similar Messages

Maybe you are looking for