Difference between PP work Centre and Main work centre in a floc ?

Hi,
Can someone tell me the difference between the PP work centre in the location tab of a functional location compared to the Main Work Centre listed in the Organizational tab ?
Thanks

Kent,
The way I understand it, is that the main work centre (Field name: GEWRK) in the organizational tab refers to the actual group who are reponsible for carrying out the maintenance of the object. Costing and capacity planning is carried out through this Work Centre. However the PP Work Centre (Field name: ARBPL) in the location tab is a different work centre. And I'm not sure what it controls (if anything). I think it refers to the location of the unit, but other than that I don't know what it controls.

Similar Messages

What is the difference between Wine, Wineskin, Winery and Wine Bottler, and how do I get Wine to *ACTUALLY* work in Mountain Lion?

Ok, so this is my first post here and I am admittedly terrible at forums. Someone might say, "This was addressed in the ___________ thread by __________! Go read it!" --- that may be so but I've spent enough hours trying to google this problem into submission to no avail based on what is apparently working for others, so I would like a chance to get specific answers to specific questions that aren't from Mar 2011, etc.
So first of all, I'm confused by all the various Wine programs/apps/whatevers. I've seen Wine, Wineskin, Winery, Wine Bottler, and at this point I wouldn't be surprised if there are even more than that. What's the difference between all of these and how do they work with one another? What do I actually need to get windows programs working?
All of my google searches have led me to people giving out fish, but no one giving out fishing lessons. I'm not a pro at mac and windows and all that, but I'm a fairly bright individual who gets VERY frustrated, very quickly, when I don't understand the why and how of something I'm attempting.
I've also found "answers" where the person attempting to help starts off helpful enough, but degrades into the most archaic of techno-babble after about 5-6 sentences. On the other hand, I've watched tutorials on youtube where the poster decides to skip (apparently crucial) sections of the tutorial, and mutters such gems as: "... you might wanna have to run Wine first before you can do anything, cuz I think it has to configure it and set up a bunch of stuff"
O.o
A happy medium between techno-babble and the most basic of explanations would be ideal for me, and I'd imagine for others as well.
Here is a summarized history of my relationship with Wine:
Diablo II - I downloaded this awesome thing which ended up being... uh... I guess Diablo II in a Wineskin "wrapper". I'm not sure, all I know is that it's a D2 icon, and if I go to 'show package contents', it's got C drive, Program Files, et cetera inside of it. I double click it, it launches D2, and it works like a dream. <3
'Vanilla Install' - That's what I heard someone call it. It was the command/terminal style install using xquartz and xcode found at http://www.davidbaumgold.com/tutorials/wine-mac/. I followed every instruction to the letter, and got all the way to '$ sudo port install wine', at which point it started going smoothly, free from the possible error he described regarding the installation of xcode, and then just failed after I left the room to use the restroom and came back. Please don't ask me to repeat what the error was, because honestly, after reading more things on the interwebs, I'm confused as to why it's even necessary to go through all of that, so I'd rather not try that route again anyways, rendering the error message quite possibly irrelevant.
Wine + Wine Bottler - So I decided to try to seek out an easier method, as I know that one must exist that doesn't involve command lines. I found a video tutorial at http://www.youtube.com/watch?v=m0BBkISOcEA, and oh man would it be great if that method had actually worked. Again, I followed all instructions provided to procure my free fish, and at the point in the video where he declares that "xquarts or x11 will open" - it doesn't open. Nothing opens. I was trying to install Star Sonata, btw.
So here I am, thoroughly worn out, frustrated at all the random places Wine is installed on my mac now, and just want someone to explain it all, from top down, without getting toooooooo technical on me. I know that might be asking a lot...

## I know that the poster has already found a solution, but the following is a possible answer for others that have similar issues.
For Winebottler, just go to their website and download it. Run the program. Choose .wine as your prefix (best choice) or whatever suits you best. You'll need a functional X11. If you can't use the one that comes with your mac, download the latest one from the website.
If your issue is one with Winebottler's Wine not running correctly due to X11, then you have a pretty ugly problem, although a simple upgrade is the best solution (Upgrade XQuartz.app).
http://www.davidbaumgold.com/tutorials/wine-mac/#part-1
The above website is the easiest way to get REAL wine on your computer. First of all, Wineskin WInery, etc. are NOT WINE. They are 3rd party apps that may use Wine or may have originally part of Wine, but they are no longer up to date with Wine. WineBottler is currently up to date with the stable releases of Wine (but not the maintenence releases).
For the website tutorial and to run Wine on your mac without using a thrid party app, you will need to know a few things.
First, you will need to know basic control of the command line. That means, sudo (you must know the administrator password to your computer), and the forms of cd (change directory).
Second, you will need Xcode. Download 4.2 (stable) or whatever other versions you want, but beware: It is over 1 GB, and you will need time for it to work.
Third, you will need to get MacPorts and configure it. The tutorial should have this data.
When you download wine (use sudo port install wine-devel for the latest development release of wine), it will first download a lot of dependencies. This will take a while. After that, it will download wine itself.
After obtaining wine, to run a program, open the terminal.app window.
cd desktop/XYZ/ZYZ\ WRQ
The above will first enter the desktop, then folder XYZ, then folder ZYZ WRQ. From here,
wine th11e.exe
Or whatever executable you are trying to open. (Using Subterranean Animism as my example).
It should, in theory, run the program. Watch the terminal for errors. If there is an X11 problem, then it's not wine acting up. If the app crashes or has other issues, check the Wine Application Database to see if your app is compatible with wine.
If you have any further questions or other things, feel free to reply; I may or may not get back to you, but there's a good chance that someone will come in eventually. Otherwise, the Wine Wiki should have some information.

Differences between Commit work, Logical Unit of Work and Roll back work

Hi all,
Can any one explain me in details what is the difference between Commit Work, Logical Unit of Work and Roll back work. Pls explain by providing some example.
and also explain me where and when these are used and what are the importance of using these.
Thanks in advance.
Regards
Ramana Prasad.T

Hi Ramana Prasad,
A Logical Unit of Work (LUW or database transaction) is an inseparable sequence of database operations which must be executed either in its entirety or not at all. For the database system, it thus constitutes a unit.
LUWs help to guarantee database integrity. When an LUW has been successfully concluded, the database is once again in a correct state. If, however, an error occurs within an LUW, all database changes made since the beginning of the LUW are canceled and the database is then in the same state as before the LUW started.
An LUW begins
o each time you start a transaction
o when the database changes of the previous LUW have been confirmed (database
commit) or
o when the database changes of the previous LUW have been cancelled (database rollback)
An LUW ends
o when the database changes have been confirmed (database commit) or
o when the database changes have been canceled (database rollback)
COMMIT WORK.
Executes a database commit and thus closes a logical processing unit or Logical Unit of Work ( LUW ) (see also Transaction processing ). This means that
all database changes are made irrevocable and cannot be reversed with ROLLBACK WORK and
all database locks are released.
COMMIT WORK also
calls the subroutines specified by PERFORM ... ON COMMIT * executes asynchronously any update requests (see CALL FUNCTION ... IN UPDATE TASK ) specified in these subroutines or started just before,
processes the function modules specified in CALL FUNCTION ... IN BACKGROUND TASK ,
cancels all existing locks (see SAP locking concept ) if no update requests exist,
closes all open database cursors (see OPEN CURSOR ) and
resets the time slice counter to 0.
COMMIT WORK belongs to the Open SQL command set.
Return code value
The SY-SUBRC is set to 0.
ROLLBACK WORK.
Closes a logical processing unit by reversing all database changes made since the last COMMIT .
You use this statement if you cannot be certain that all the database changes have been executed correctly.
The update routines are not performed.
ROLLBACK WORK belongs to the Open SQL command set.
Note
If the ROLLBACK statement occurs within a SELECT loop, the processing cannot continue because the database cursor is invalid. After the ROLLBACK statement, you should therefore ensure that all SELECT processing has been explicitly terminated.
<b>Plz. Avoid Duplicate Threads.</b>
Hope this resolves your query.
Reward all the helpful answers.
Regards

Difference between WIP (work in progress) and Semi finished goods

what is the difference between WIP (work in progress) and Semi finished goods
and how to handle their valuation seperately in SAP.
pls help with some specific important inform on both   WIP   and semi f

Hello Sanjeev,
The difference between SFG and WIP is that ,
1 ) Valuation Class For SFG starts 7***   but WIP material stock starts with 3***
2 ) Stock / inventory of SFG can be seen at point of time but WIP is an Order item
3 ) We can find the stock of SFG at any point of time say it is having specific storage location But WIP is calculated from
    Order for which items are drawn .
4 ) Example You have to manufacture Product AAA which contains SFG1 , 2 , 3 which is made up of some component items
    once SFG 's made the inventory is updated during GR but the components lying in the shop floor required to complete the order
   so we want to know at any point of time how many these materials are lying and the same was issued against Order
   reservation to finish the balance Order Quantity is called WIP. You have confirmed only say 80 Pcs of FERT out of 100 Pcs
   remaining 20 Pcs needs to be confirmed and is being manufactured in the shop floor and the same is lying as WIP .
Material Consumption to Production Order:
In FI:
ROH consumption Account       Dr (PROFIT & LOSS ACCOUNT)
To ROH Inventory Account       Cr (BALANCE SHEET)
Same in the case with HALB
In CO: Cost of Material is
In CO: Cost of Material is debited to Production Order
   For WIP :
Calculation of WIP In FI:
      WIP Account                           Dr. (BALANCE SHEET)
To Change in WIP Account      Cr (PROFIT & LOSS ACCOUNT)
If the Order is completed:
In FI:
Change in WIP Account           Dr (PROFIT & LOSS ACCOUNT)
To WIP Account
Pl come back if you have any doubt,
Regards,
Jaya Vimal
Edited by: jaya vimal on Aug 9, 2010 2:10 PM

Main differences between R/3 CIC and CRM CIC ?

Hi all,
does anybody now the main differences between R/3 CIC and the CRM CIC? or what are the main restricitions in the R/3 CIC.
Thanks and regards,
Norbert

Hi Novert
The CRM 4.0 system has two "CIC's", they have a WinClient and WebClient.
Both offer multi-channel and real-time hardphone/softphone sync. The WinClient is more flexible and faster performance. The Webclient is lighter foot print and more the future of what SAP plans to offer.
The CIC in ECC is SAPphone based, which means that real-time hardphone/softphone sync is not possible. It's also telephony only through SAPphone. You have to use SAPconnect for e-mail, and there is NO webchat support. We have a number of customers that embed the Agent Dashboard into their CIC for R/3 to provide that extra functionality, but even without it CIC in R/3 is usable.
Many vendors provide SAPphone Connectors to different CTI's (computer telephony integrations). MCIS WinClient Connectors are only provided by AMC. Many vendors provide Connectors for the WebClient (which is based on ICI). The connectors from AMC support all the different "CIC's".
There are some other functional differences as well; like upport for ERMS and the types of transactions you can access, etc.
R/3 CIC is not getting developed or enhanced since 1999. Most of the new feature is developed in CRM CIC. If you do not care any of the new feature, you can use ECC CIC. You can find the feature list on Service Market Place.
Regards
Manohar

Difference between XI 3.0 and PI 7.0

Hi,
What is difference between XI 3.0 and PI 7.0
Is this way we check version:
System-- Staus -- Component Information --
PI_BASIS -- 2005_1_700
So the above system is PI 7.0 -- right?
Regards

Hi Rick,
PI 7.0 works on WEBDYNPRO....They are basically the same technically but when SAP launched Netweaver 2004s , to bring all objects of Netweaver 2004s in Synch with the WAS version, XI was renamed to Process Integration (PI 7.0) .
A comparison of the service packs in 2004 and 2004s;
in 2004 - in 2004s
SP12 & < - SP04
SP13 + 14 - SP05
SP15 - SP06
SP16 - SP07
SP17 - SP08
SP18 - SP09
XI3.0 is based on WAS(web application server)6.40 - NW2004
PI7.0 is based on WAS(web application server)7.0 - NW2004's
http://help.sap.com/saphelp_nw2004s/helpdata/en/d6/369142f195675ee10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/fb4cd3207c7063e10000000a1553f6/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f36ce30f-0e01-0010-a89b-c158d07c44ff
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ec19c05d-0501-0010-09a2-b6db51b5318d
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5441afe5-0601-0010-dba5-dc5f9d5caa9d
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c50cddbb-0601-0010-92a7-f2a40ca68e6d
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f027dde5-e16e-2910-97a4-f231046429f2
Refer these threads as well:
PI 7.0 and XI 3.0
http adaptor on which factors we will use
Diff between XI and PI
Diff between XI and PI
http adaptor on which factors we will use
differences between xi 3.0 and pi 7.0
Difference/ changes from XI 3.0 to PI 7.0
give me main advantages of XI-7.0 TO XI-3.0
XI 7.0 vs Xi 3.0
XI/PI
XI vs. PI
XI 3.0 vs. PI (XI 7.0)
Difference/ changes from XI 3.0 to PI 7.0
moving from XI 3.0 to PI 7
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/xi%2band%2bpi%2bglossary
Regards,
Vinod.

Re: DIfference between Schemas, PCRS' FUnctions and Operations

Dear SAPExperts,
Can anybody pls tell me what is difference between Schemas, PCRS' Functions and Operations.
Thanx in advance
Regards
Aniruddha

Hi Aniruddha
When the payroll driver is executed (for ex: PC00_M40_CALC for INDIA is executed) the schema IN00 (standard schema) is executed and it calls certain functions (functions may use Rules. Rules contain Operation) and also subschemas.
Functions could be of four types
1. Performing some payroll computations (E.g. INEPF function calculates the PF amount of an employee during payroll run)
2. Calling rules (E.g. P0045 function calls a rule INLN to compute the loan details of a personnel number).
3. Getting data from Infotypes (E.g. P0581 will get the data from Infotype-581 for payroll processing).
4. For some decisions. (E.g. IF & ENDIF function is used to execute as per the true and false decisions) etc.
When the PY is executed SAP uses lot of Internal Tables to store data and also provides data to other internal tables.
The read and change access to Internal Tables is enabled using functions that are executed in a personnel calculation schema and using operations that are executed in personnel calculation rules.
The following is just an attempt to provide some info on how Functions are processed during the PY Run. For ex: (functionality of subschema XIN0 and INBD)
1. INITIALIZATION OF PAYROLL: When the Payroll is executed first the subschema XIN0 is called,   This subschema comprises the following main steps:
I.     Specify program type (payroll or evaluation)
II.     Set switch for database updates (YES/NO) all database updates are controlled via this switch (otherwise simulation)
III.     Only infotypes from the HR master record which apply to the selected personnel number are read.
IV.     All Time Management infotypes are imported.
V.     Specify check against control record PA03 (test or live).
2. READ BASIC DATA: Once the Initialization of Payroll is successful, the subschema INBD is called. This subschema reads the Basic data of an employee who is there in the Payroll execution. Basic Data includes, determining Employee Name, Reading Work Center/Basic Pay Data, Setting Financial Year Dates and Allowance Grouping Tables, Reading Previous Employment Tax Details, Reading Housing (HRA/CLA/COA), Reading Exemptions, Reading Income from Other Sources, Reading Section 80 Deductions, Reading Investment Details (Sec 88), Reading Provident Fund Contributions, Reading Other Statutory Deductions, Reading Car and Conveyance, Reading Long Term Reimbursements, Read ID Details. Function GON checks whether all the master data has been imported, no further processing of schema will occur unless certain data is present.
The Subschema INBD calls the following functions in order to read the Basic Data:
ENAME :
Function ENAME reads the last valid name of the employee in the payroll period. The formatting used for the country in question is used when displaying this name.
WPBP
If an employee receives a pay increase within a payroll period, the Basic Pay infotype (0008) is changed and delimited as of a specific date. Two data records exist for one payroll period.
During payroll, the system writes the Basic Pay wage type to the results table with two different indicators. These split indicators are a link to the WPBP table that contains the relevant values. The system takes into consideration both data records for the corresponding partial periods when calculating remuneration.
ININI
P0580
P0581
P0582
P0584
P0585
P0586
P0587
P0588
P0583
P0590
P185I
GON :
                Function GON checks whether all the master data has been imported. No further processing of the schema will occur unless certain data is present. Checking procedures vary from country to country. There must always, however, be a work center (P007).
[Def. of Functions, Rules and Operations (copied from Raju's answer)
Schema is a collection of functions
A Rule is a collection of operations.
An operation is a very basic piece of logic that is used, mostly, to manipulate wage types
Best Regards
Reddy

Difference between Terminal server connection and MSTSC remote desktop connection

Hi everyone , Wats the main difference between Terminal server connection and MSTSC remote desktop connection? Well both are used to connect a server remotely. right!
Are there any much difference between them?

RDP is a protocol and MSTSC is the RDP client.
In the situation you are referring to, you use MSTSC (RDP Client) in both cases, but when you connect to a client PC (Windows 7, Windows XP, etc) you can only connect if nobody is using that PC at the moment, if you connect to a server you can work along with
some other users. Server OS supports 2 connections by default, if you want more people you need Remote Desktop Services and RDS licenses.
Thanks,
сила в справедливости

What is difference between ADF Task Flow and Faces-Config - when delpoy ?

What is difference between ADF Task Flow and Faces-Config? When I create navigation between pages with ADF task flow then the navigation don't work when I deploy my application to Weblogic 10.3. When I use default server then navigation works fine. With Faces_config in both situations all works ok - on Stanalone server and default.
Where is the problem?
Best regards!

Shay, I don't use both faces-config and adf task flow! When I failed with task flow I tried faces-config.
I have active on my weblogic - adf.oracle.domain(1.0,11.1.1.0.0). This is the right ADF? If yes then where is the problem?
Best regards!

Difference between ECC 6.0 and earlier versions

Hi,
one of the difference between ECC 6.0 and earlier versions is that instead 'WS_UPLOAD' and 'WS_DOWNLOAD' in ECC we should use 'GUI_UPLOAD' and 'GUI_DOWNLOAD' respectively.
(of course SPDD and SPRO tcodes is known by everone i suppose)
Similarly can u all put down some differences here, atleast one entry by each, I think we can make a good docu. I have searched the net for the differences but could not get much, so by each of us contributing one each, it would become good docu..for all of us.
Thanx in advance

Unicode Errors Encountered and their Solutions
E1. In u201CTEXT MODEu201D the u201CENCODINGu201D addition must be specified.
     Error:
     OPEN DATASET FILE FOR OUTPUT IN TEXT MODE.
     Solution:
     OPEN DATASET FILE FOR OUTPUT IN LEGACY TEXT MODE.
E2. In Unicode, DESCRIBE DISTANCE can only be used with the IN BYTE MODE or IN
      CHARACTER MODE addition.
     Error:
     DESCRIBE DISTANCE BETWEEN T_KOMK AND T_KOMK-HIEBO01 INTO BPOS.
     Solution:
DESCRIBE DISTANCE BETWEEN T_KOMK AND T_KOMK-HIENR01 INTO BPOS
IN CHARACTER MODE.
E3. u201CUSR02-UFLAGu201D must be a byte-type field (Typ X or XSTRING )
     Error:
     IF USR02-UFLAG O YULOCK.
     Solution: Since the data type of USR02-UFLAG is type INT and is compared with data type
                X u2013 Hence the error. So we define a new variable ZULOCK and assign the
                value of USR02-UFLAG to ZULOCK.
              New variable
              DATA: ZULOCK(1) TYPE X.   "APBRP00
              Assign value
                            ZULOCK = USR02-UFLAG.
        Compare -
               IF ZULOCK = YULOCK.   u201Creplace IF USR02-UFLAG O YULOCK.
E4. HT cannot be converted to a Character type field
Error :
WRITE ht TO t_data+10(2).
Solution : Since the data type of ht is a type u2018Xu2019 and the data is been transfer to
         t_data which has a data type u2018Cu2019. value of one data type cannot be copy to
         another data type where one of them is type string .Hence the error occur,
         so the data type of ht is been change to Type u2018Cu2019
     OR
           A Tab ( value 09 ) is introduced as part of the row. The value 09 is not converted in Unicode environment. Instead we need to use class
     Error:
          DATA: BEGIN OF ht,
               x(1) TYPE x VALUE '09',
          END OF ht.
     Solution:
              Define Class after the Tables definition.
                   CLASS cl_abap_char_utilities DEFINITION LOAD.
              Data Defination : Comment internal table HT and define a variable HT type C.
       *   Insert + APRIA00 05/02/2007 Unicode project
       *   DATA: BEGIN OF ht,
     *         x(1) TYPE x VALUE '09'
       *   END OF ht.
     *   Insert - APRIA00 05/02/2007 Unicode project
       DATA HT type C.
       Before using HT assign Horizontal tab.
                 Ht = CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB.
E5. In Unicode programs the u201C#u201D cannot appear in names, as it is does here in the name    u201C#LINESu201D
     Error :
     #LINES                 TYPE I,
     Solution : Since the # is used in the start of name, it is not allowed. We need to
              remove it.
     Solution for the above
     V_LINES                 TYPE I,
E6. In u201CTEXT MODEu201D the u201CENCODINGu201D addition must be specified as well as the addition was required FOR OUTPUT,FOR INPUT, FOR APPENDING OR FOR UPDATE was expected.
     Error:
     OPEN DATASET PATH_NAME IN TEXT MODE.
     Solution:
     Download =     OPEN DATASET PATH_NAME FOR OUTPUT IN LEGACY TEXT MODE.
     Upload        = OPEN DATASET AUSZUG-FILE IN TEXT MODE FOR INPUT ENCODING DEFAULT.
E7. u201CTABu201D must be a character-type data object( data type C,N, D, T or String). Field string)
     Error:
            data: begin of tab,                   "Excel Parameter Split at TAB
        t type x value '09',          "Tabulator
       end of tab.
            concatenate 'Material' 'Package Status'
                into z_download-line separated by tab.
            ( In the above command the two field are to be separated with a horizontal Tab. The earlier      way of assigning the tab value u201809u2019 will not work in Unicode environment.
     Solution:
     Define a class just after the Table defination.
          CLASS cl_abap_char_utilities DEFINITION LOAD.
            Define variable Tab as shown below :
          Data : TAB           TYPE C.
     Before the concatenate statement assign the value of Tab using pre-defined attributes.
          TAB = CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB.
E8. Upload/Ws_Upload and Download/Ws_Download are obsolete, since they are not Unicode-
      enabled; use the class cl_gui_frontend_services
     Error-1: Function WS_DOWNLOAD is obsolete in Unicode environment.
            call function 'WS_DOWNLOAD'
                 exporting
                      filename = zfilename
                 tables
                      data_tab = z_download.
     Solutions-1: Instead of WS_DOWNLOAD use GUI_DOWNLOAD.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
*   BIN_FILESIZE                  =
    FILENAME                      = zfilename
TABLES
    DATA_TAB                      = z_download.
E9. The "/" character is reserved for identification of namespaces. It must be entered twice.
        The name of a namespace must be at least 3 characters long.
     Error :
                 U/N(3)        TYPE C, "U/N    --> ERSETZT DURCH SPACE
     Solution :
     * Special character can not be used to define a data variable
     *      U/N(3)        TYPE C, "U/N    --> ERSETZT DURCH SPACE
              U_N(3)        TYPE C, "U/N    --> ERSETZT DURCH SPACE
     * Insert - APSUS02 07/02/2007 Unicode Project
E10. "LP_TAB" and "CS_TAB" are not mutually convertible. In Unicode programs,
         "LP_TAB" must have the same structure layout as "CS_TAB", independent of the length
         of a Unicode character.
     Error : This error is encountered when data from one internal table is copied to another
                         internal table which different structure. In this case its LP_TAB & CS_TAB.
                 LP_TAB[] = CS_TAB[].
     Solution :
          * Replace + APSUS02 07/02/2007 Unicode Project
*   LP_TAB[] = CS_TAB[].
              move-corresponding CS_TAB to LP_TAB.
          * Replace + APSUS02 07/02/2007 Unicode Project
E11. Could not specify the access range automatically. This means that you need a RANGE
          addition.
     Error : Range need to be specified as an addition to the command.
            DO 4 TIMES VARYING HELP_CHAR FROM ABCD(1) NEXT ABCD+1(1).
           Solution :
            DO 4 TIMES VARYING HELP_CHAR FROM ABCD(1) NEXT ABCD+1(1)
          * Insert + APSUS02 07/02/2007 Unicode Project.
                                                      RANGE ABCD+0(4).
* Insert - APSUS02 07/02/2007 Unicode Project.
E12 . Processing Terminated Error code: Error in opening /
                                          Path not found when downloading to Unix directory.
     Error : PARAMETER: outfile(92) DEFAULT
              '/CP/interface/NPP/data/MX/cbslaprcpts'
                    LOWER CASE,
               kmxmstrd AS CHECKBOX.
            This error is encountered when the path is missing. The above path is related to CCP.
     Solution: For testing purpose comment the original path and replace it with
                                 /CP/interface/CCD/Unicode_test/
E13.    Upload/Ws_Upload and Download/Ws_Download are obsolete, since they are not                                                                       Unicode- enabled; use the class cl_gui_frontend_services
     Error: Function WS_UPLOAD is obsolete in Unicode environment. (During UCCHECK)
               Call function 'WS_UPLOAD'
       Exporting
            Filename                = zfilename
            Filetype                = u2018DATu2019
       Tables
            data_tab                = z_upload
       Exceptions
            Conversion_error        = 1
            file_open_error         = 2
            file_read_error         = 3
            invalid_table_width     = 4
            invalid_type            = 5
            no_batch                = 6
            unknown_error           = 7
            gui_refuse_filetransfer = 8
            others                  = 9.
     Solution: Instead of WS_UPLOAD use TEXT_CONVERT_XLS_TO_SAP. Do not use temporary file put the file name as it is.
1) First define a type pool and a variable of type truxs_t_text_data.
TYPE-POOLS: truxs.
DATA: it_raw TYPE truxs_t_text_data.
     2) Use this it_raw in the function module in parameter i_tab_raw_data. Put file name and the internal table in the function module.
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
    EXPORTING
*     I_FIELD_SEPERATOR        =
*      i_line_header            = ' '
      i_tab_raw_data           = it_raw       " WORK TABLE
      i_filename               = zfilename
    TABLES
      i_tab_converted_data     = z_upload[]    "ACTUAL DATA
   EXCEPTIONS
      conversion_failed        = 1
      OTHERS                   = 2.
     Comment u201Ci_line headeru201D. It takes the first/ header line of the file which is to be uploaded.
Put square brackets after internal table as shown above.
E14.    CURSORHOLD may not be converted into a number.
     Error: GET CURSOR LINE CURSORHOLD VALUE CURSOR_HOLD.
     Solution: In the declaration part of CURSORHOLD, one field is of u2018Pu2019 type and one field is of u2018Iu2019 type, which is not allowed in Unicode environment.So change the the type of it to NUMC.

Difference between SAP Business Workflow and CRM Workflow

Hello guys,
Is there any difference between SAP Business Workflow and CRM Workflow?
Are there others workflows types in SAP?
In all SAP Workflow Courses (BIT600, BIT601, BIT603, BIT610) only was talked about SAP Business Workflow, and nothing about CRM Workflow.
Thanks a lot!
Kleber

Hello Kleber,
There is not much of the differance between CRM workflows and SAP Business workflows..
Workflows are esentially part of Basis (BC) components and hence its the same across all SAP products as all these products have components of Basis(BC) in them...
To Conclude, SAP Busines workflows and CRM workflows are the same things... However when you work on CRM, the BOR objects would be belonging to CRM and not to ECC... However conceptwise , there in no change at all.. If you learn BIT100......, you can also work on CRM workflows..
Regards,
Anand

I did re-set my password and when I click on Install for Mavericks, I still get a box for "administrator password" and it still won't accept my new password. Is there a difference between my Apple ID and the administrator password they're asking for?

I downloaded Mavericks and it won't install. I did re-set my password and when I click on Install for Mavericks, I still get a box for "administrator password" and it still won't accept my new password. Is there a difference between my Apple ID and the administrator password they're asking for? I never had an administrator password-- I just hit enter and have never had a problem before with previous installations. I'm on an iMac, from 2007, running Mt. Lion (version 10.8.5). I've been looking for other's posts who may be having the same problem, but haven't found any. Can anyone help?

Ugh. The 'no password, no work' thing is a recent Apple development. I ran into it on my system and ended up having to do a clean install on a partition I fully erased.
I suppose, if you have the ability to, go online and look up how to burn a bootable DVD image. Download the 10.8.4 image then use the Disk Utility to make a boot image of it. You'll need a dual-layer DVD or a USB drive (or memory stick at least 8GB) If you've got an optical drive, burn the disk, if you've a USB device, use that.
Then get a pocket drive and copy your important files off the system or let Time Machine do a full backup.
When the backup is done, insert the disk and hold down the C key until the machine boots off of the DVD. At the point you get to the start window, go to the menu and choose the Disk Utility.
In the Disk Utility, reformat the drive. You go to the actual DRIVE (not the Macintosh HD, but the root above it that is the actual hard drive device)
I always do this and *partition* it into several volumes, the benefit being, you can store all of your music, documents and importans stuff on that secondary storage volume you make - it will have it's own index and then the first volume is where you put the OS and it will have it's own index as well. That way, if the OS throws a wobbler and you need to reinstall, you don't lose your data.
Depending on the size of your hard drive, it is good to give your OS partition at least 60GB and optimally 100GB, and the rest for storage.
Name your volumes, use the little box sliders to manually size them or put that number in the size window, select for the format, Mac OS Extended (Journaled) and hit Apply and then the Disk Utility will quickly create your new partitions.
Once finished, quit the Utility and it will return you to the OS installer. Select the volume you want to install to and it should start up and install.
Once the installation is done, you'll get the new machine startup then you MUST put in a password for the computer. Once you're in, and to the desktop, don't bother with any Mountain Lion updates, go right to the App Store and get the Mavericks update and let it install the app to your Applicaitons folder, then do that install.
On a side note, there MAY be a way to make a disk image from the Mavericks application and avoid the entire Mountain Lion step.. I honestly do not know, but a bit of hitting the search engines may find out if there is. I think that if you looked for "make Mavericks boot disk or boot image' you may find something.
Good luck!

Difference between ALBPM6.0 studio and ALBPM6.0 Enterprise server

Difference between ALBPM6.0 studio and ALBPM6.0 Enterprise server.Can anyone help on this.
Thanks in advance.

Studio is the integrated development and test environment. As such, it's intended for designing processes, creating the UI for the screenflows, creating the objects and introspecting services that you want to tie into the process. Studio has a runtime engine that can be used by a single developer for testing purposes. It runs a little database called Derby and a Tomcat Web Server - again so the work done by a single developer can be tested on the developer's machine at runtime.
Enterprise on the other hand is the production environment. Unlike Studio, it does not have the capability to develop projects. It is the runtime environment where many end users can concurrently run their instances on an industrial strength engine. It can run on a standalone JVM or an application server.
Studio is for development. Enterprise if for Dev/QA/production environments where many users need to hit the engine and many instances need to run concurrently.

Differences between Roles, Schemas, Users and Logins.

I need differences between Roles, Schemas, Users and Logins. Can anyone help me. Thanks in advance

Roles:
I think of creating roles in the database to group users of like
function. Roles are granted certain permissions in the database. You
should become familiar with the fixed database roles since these will be
utilized once you start creating users within the database. Also, once
you see the type of permissions that are granted to each role, is makes
more sense.
Schema: there can be several schemas in a database,
which will house different types of objects such as tables, indexes,
stored procedures, functions, etc. Users own schemas. Looking into
the AdventureWorks database illustrates this concept, with several
schemas like HR, Production, etc.
Login: Think about login as
gaining access to the SQL Server instance. If a user account is not
granted any permissions within the instance, you basically just were
able to unlock the door and enter the room, by creating a user you then
grant access to the database objects or principals, and can begin to
work with them.
Users: Users own schemas, and as such will be
able to manipulate the objects they own. Some of the manunipulations
are very permissive, such as creating tables, indexes, stored
procedures, functions, etc. These are developers and administrators.
Users
are created and granted permissions for application use, which will
have select, update, insert, and delete and execute permissions to a
finite set of objects in the schema, for which the application will need
to function properly.
In a client server database, as an
example, of the structure. Roles were defined which provides the
permissions to the database objects in the database, which only has one
schema 'dbo'. One SQL server login was created with the same username,
and dbo is the assigned default schema, and the roles assigned to that
username.
In the application, each specific user is given there own
"application" login which is mapped to the one defined sql server
login.
Ahsan Kabir Please remember to click Mark as Answer and Vote as Helpful on posts that help you. This can be beneficial to other community members reading the thread. http://www.aktechforum.blogspot.com/

Differences between CTI OS Server and CTI Server ?

Hello community,
I've been working with CTI Desktop for a while but I'm not clear about the differences between CTI OS Server and CTI Server?
If you go to http://docwiki.cisco.com/wiki/Unified_CCE_Software_Compatibility_Matrix_for_8.5(x) and read note 10, they make diffrences between both products.
Thanks in advance,
Alejandro

CTI Server was the original CTI interface into ICM. It uses a network communication protocol, GED-188 I believe, for communication between the client and server. This is relatively difficult to program against. CTIOS and it's related SDKs were developed to provide an easier method of developing desktops and integrating desktop applications. CTI Server communicates with ICM, CTIOS Server communicates with CTI Server, and desktop applications using the various SDKs communicate with CTIOS Server. Cisco may be looking to get away from CTIOS Server in the future because of their decision to integrate Finesse with CTI Server rather than CTIOS Server. Hope that helps.

Difference between XI 3.0 and XI 7.0

What is the Difference between XI 3.0 and XI 7.0?
( functionality & architecture wise)

Hi,
There is no new features added in PI7.0, if u have working on XI 3.0, PI7.0 Older versions the features same..
But PI7.1 there is new changes u can find below.....
Integarte SAP & Non-SAP Legacy system
PI 7.1 is based on open, web service enabled standards and
Integrate all SAP and non-SAP, A2A, B2B, BPM, service enabling and BAM
Highlight of enhancement in PI7.1
1) Enterprise Service repository (ESR) contains the design Registry
2) Includes significant high-volume message processing is supported by message processed in a single
Service call
3) Also importantly support for asynchronous messaging based Reliable Messaging (WS-RM) for both
Brokered communication between two systems will be supported in this release.
4) Provide Service Registry benefits based on UDDI 3.0
Enterprise Service Repository
In PI7.1 ES Repository is at the heart of Enterprise SOA
ES Repository is really the master data repository of service objects for Enterprise SOA
It contains the definition & process of services
In ES Repository has two parts, one is the ES Repository and the other being the Services Registry
ES Repository (ESR) is really the master data repository of service objects for Enterprise SOA
Besides service definition the ES Repository also provides you with a central point for finding and
Managing service metadata from different sources, including application deployments - this is
Where the Services Registry comes in. The Services Registry is the UDDI part of the ESR which
Enables service consumers to find services
The SAP XI Integration Repository used by process integration has become the basis of the central Enterprise Service Repository: powering Enterprise SOA and Service Enablement.
Objects in the ES Repository include:
Global Data Types (CCTS based)
Process Component Models
Executable Integration Processes (BPEL)
Integration Scenarios
Service Interfaces (Enterprise Services)
Interface Mappings
Enterprise Services built in the ES Repository
Enterprise Services includes:
Are built using a consistent enterprise model based on: GDTs, Process Components, and Business Objects.
Are based on open standards.
Are mapped to the Service Interface object in the ES Repository.
Global Data Types - Building blocks for Service Interfaces
Defined in the ES Repository
Defined company-wide based on open standards (ISO 15000-5, UN/CEFACT CCTS)
Reusable semantic building blocks for service interfaces and message types
Process Component Models
Drill down from high-level models to service interfaces and operations
Process component architecture models enable SOA governance
Process components expose on enterprise services, which are based on service operations
Web Services Reliable Messaging (WS-RM)
Asynchronous messaging (EO, EOIO) based on open WS standard
Support Business Activity Monitoring (BAM)
Embedded Event Infrastructure: Collecting, pre-filtering and publication of events across SAP and non-SAP systems.
Event handling: cast the local event to an event proxy to send out event messages to event Consumers.
Transaction SWF_BAM for event filtering via filter rules and event handling.
Enhancement for Mapping
Re-usable user defined functions.
Look-up function reads multiple fields.
Synchronous DB RFC lookups: Use graphical function to model look-ups.
Specify mapping parameters at configuration time.
Principle Propagation based on SAML
This feature uses the WS-RM protocol.
The implementation of this feature is based on the open standard SAML and can
be used with backend systems that support the SAML technology.
Forward user context from sender to receiver.
Authorization check in receiving system based on original user.
Support BAM Milestone Modeling (BPEL)
Sub-Process Calls: Integration Process Call,
User Interaction: User Decisions (initially not part of this project, but will be covered as well to draw the complete picture),
Alert Categories
Enhancements for Process Automation
Human interaction:
Integration paradigm (design/ configuration).
Generic user decision.
Language dependent texts for end-user display, enriched with variables.
WS-BPEL 2.0 adoption: Preview and implementation BPEL4People, BPEL-SPE Simple user defined functions can be configured directly in the process.
reward points if helpful...
PrasHanT

Difference between PP work Centre and Main work centre in a floc ?

Similar Messages

Maybe you are looking for