Difference between production version and routing

hello pp experts,
why do we create production version, and what's the difference between production version and routing?

Dear sarfaraz lodhi ,
Production version is a combination of BOM & Routing in the case of Discrete Manufacturing and it's a
combination of BOM & Rotuing/Rate Routing in the case of Repetitive Manufacturing.
Created either through MM02 by selecting MRP4 view or else through C223
A production version determines the various production techniques that can be used to produce a material.
It defines the following information:
·        Alternative BOM for a BOM explosion
·        Task list type, task list group, and group counter for assignment to task lists
·        Lot-size restrictions and period of validity
A material can have one or more production versions.
Routing contains the set of operation that's required for producing a product either a HALB - Semi-
Finished product or else a FERT - Finished Product.
The T code for creating Routing is CA01.
Regards
Mangalraj.S
Edited by: Mangalraj.S on Sep 24, 2008 10:27 AM

Similar Messages

What is difference between Oracle version and DB version.

What is the difference between Oracle version and DB Version?
How we came to know about the installed version through SQL query.

SQL> select * from v$version;
BANNER
Oracle8i Enterprise Edition Release 8.1.7.0.0 - Production
PL/SQL Release 8.1.7.0.0 - Production
CORE 8.1.7.0.0 Production
TNS for Linux: Version 8.1.7.0.0 - Development
NLSRTL Version 3.4.1.0.0 - Production
SQL>
Joel P�rez

Differences between One Arm and Route modes?

Hi Guys,
What are the differences between One Arm and Route modes? Can anyone please explain?
Krishna

Hi Krishna,
Have a look at the two links below. They provide configuration examples for each of the two topologies along with explanation on the different commands used.
http://docwiki.cisco.com/wiki/Basic_Load_Balancing_Using_Routed_Mode_on_the_Cisco_Application_Control_Engine_Configuration_Example
http://docwiki.cisco.com/wiki/Basic_Load_Balancing_Using_One_Arm_Mode_with_Source_NAT_on_the_Cisco_Application_Control_Engine_Configuration_Example
I hope this helps
Daniel

Re: Difference between switcher component and router activity

Hi all,
Here i want to know the difference between switcher component and router activity.
Can anybody give the difference between them or suggest any blog for this.
Thanks,
Syam

<af:switcher> component is an ADF Faces component. You can use it within (the source of) a JSF page or fragment to include a particular group of other JSF components depending on the switcher expression's value.
Router activity is not a JSF component, i.e. you cannot use it within a JSF page of fragment. It is an ADF taskflow activity. You can use it as an activity within an ADF Taskflow to route transitions between some other activities in the taskflow depending on the router's expression.
Dimitar

Difference between Planning Version and Simulation Version

Hi friends,
What is the difference between Planning Version and Simulation Version?
Thanks,
Debi

Debi
There are a lot of threads in this forum that give detailed info about version concept. Also you can refer to help.sap.
Anyways , planning version is the version against which your live cache data is stored. The data against this version is the one that the planners and buyers are going to refer to or use to make their planning and buying decisions. Data against the planning version is nothing but data relevant to the business .
There may be instances where you would like to simulate some scenario. If you want to do trial and error analysis and at the same time if you do not want to impact the actual business data , then you create simulation versions and simulate your scenario.
For example your actual sales orders received for the month of March may be 100 CS. This is the actual number that will be stored against your planning version. Lets say the demand planner wants to find out what will be the impact if there is a sudden bulk demand from a new customer for 500 CS - that is if he wants to do a what - if analysis then he can create a simulation version and try to check the impact .
Thanks
Aparna

Differences between Product Version SAP ERP 2005 and SAP ECC 6.0

Hello Guys,
I have to setup an new XI interface between two R/3 system. During Integration Scenario setup you have to select under Application Component Type the Product version for the R/3 systems.
Now, i am able to select SAP ERP 2005 or SAP ECC 6.0 from menu
Could someone tell me the differences between SAP ERP 2005 and SAP ECC 6.0. Both are listed as Product Versions.
Thanks in advance!
Jochen

SAP ECC 6.0 is latest version 2005 is last year version . as you are intergatin between 2 . you need select accordingly our source and target.
let me know you still require any doubt
Thanks
Sreeram
Message was edited by:
Sreeram Reddy

Difference between 620 version and 640 version of librfc32.dll

Hi,
What is the difference between librfc32.dll (620 version) and librfc32.dll( 640 version).
If I built my application with librfc32.dll(620 version) can I deploy it in a environment where librfc32.dll(640 version) is used.
please let me know if my application will break or face some problems.
Could you please reply as soon as possible , we are facing problem with production environment, just want to confirrm if this could be the root cause.
Thanks
Sivasankari

hi sivashankari,
librfc32.dll troubles
Once you are working with SAP BW BEx tool and accessing different version of SAP BW you might encounter an error in BEx Query Designer says: "Run-time error '-2147417848 (800010108)': Automation error The object invoked has disconnected from its clients". BEx Query Designer crashes afterwards.
Solution is to replace the RFC library librfc32.dll stored in your \WINDOWS\system32 on the client PC with a proper version depends on you SAP GUI version:
620: Version >= 6206.6.1938.4727 (620x.x.x.4727).
640: Version >= 6400.3.79.4740 (640x.x.x.4740).
710: check the newest patch of SAP GUI .
regards
karthik
reward me points if usefull

Difference between product costing and cost collector

Hello experts:
Can anybody tell me wich is the difference between the product costing calculation and the preliminary cost estimate for cost collector?
Thanks
Laura

Hi,
Product cost collector is a cost object which collects actual cost which are incurred in the production of materials periodically. This is normally used in product product cost by period. Whereas, product cost calculation is wider scope.
Best Regards,
Madhu

Difference between full version and academic version

So I just received my first FCE4 software but it has a sticker saying "Academic: Not eligible for upgrades"
I was wondering why the academic version was a little cheaper... I just wanted to know before I actually open this package, what kind of benefits would I be missing (other than not being able to upgrade to FCE5 I guess...) if I just decide to keep this academic version? Do you recommend just keeping this version or get a regular full version?

There are only 2 differences between the retail & academic versions, and they both pertain to the license, not the functionality of the software:
1 - the price of the academic version is lower than the retail version
2 - when you license (purchase) the academic version, you are not eligible to upgrade it in the future by purchasing an upgrade. (So, if you have FCE4 Academic Version, and someday FCE5 comes out, at that time you would have to purchase a full FCE5 Retail or FCE5 Academic in order to upgrade; you would not be eligible to purchase a reduced-price FCE5 Upgrade version.)

Difference between bridge mode and routed mode on CSS

Hi,
Could some one tell me the difference between routed mode and bridge mode.
Regards
Neha

Hi,
routed mode:
The CSS acts as a router, it routes packets from the client to the server. The server has the ACE configured as default-gateway.
There is a client-side VLAN and a server-side VLAN. These VLANs have different subnets.
Bridged mode:
The CSS acts as a bridge, it switches frames from the client to the server. The server has the upstream router configured as default-gateway.
There is a client-side VLAN and a server-side VLAN. These VLANs have the same subnet, but different VLAN IDs. The ACE bridges the client traffic from the client-side VLAN to the server-side VLAN.
Bridged mode would be most used in case one cannot change the servers IP addresses, or if address space is an issue.
Hope this helps.
Kind regards,
Dario

Difference between Productive edition and Developer edition

Hi,
what is the difference between SAP NW CE 7.1 installed in Developer edition and Productive Edition.
1)If we are planning for a three system landscape like SAP ERP instances with dev-qas and prd which edition
should we be going ahead with ?
2) In productive edition, can't we install sap nw developer studio like we can do in developer edition.
3) In a 3 tier landscape can we have a mix of editions ie DEV with developer edition and PRD in production edition..
Please reply.
Regards,
Sandeep

Hi,
The difference is mainly that the productive edition is compliant to the usual SAP system layout(sapmnt/saploc shares, users, groups, etc.) while in the development edition these are skipped. From the functional perspective they should be identical.
In addition I AFAIK 32 bit windows is generally not supported for production (because of memory management issues) while 64-bit is not supported for development (IDE).
On your questions:
1) I guess development for developers, production for the rest.
2) I don't think the dev studio is supported on 64-bit.
3) No problem here. However if you're about to need system copy (for example to clone productive system data into dev/qa environment) it will not work for development edition. Have this in mind when you plan your landscape.
Hope this helps !
Best regards, dido

Difference between production mode and developement mode of weblogic STARTMODE?

when set STARTMODE to true,weblogic will be started on production mode?
what's the difference of production mode & developement mode ?

Obtain the default number of threads available to the execute queues.
If the default number of threads is 15, the server is set to Development mode.
If the default number of threads is 25, the server is set to Production Mode.
thanks,
Deepak
Richard Hendershot <[email protected]> wrote:
is it possible for my code to find out what mode is in effect? I need
to be able to suppress some features when running in development mode.
TIA!
Deepak Vohra wrote:
Refer to
http://e-docs.bea.com/wls/docs81/adminguide/overview_domain.html#DevModeOrProdMode
thanks,
Deepak
"Icewolf Li" <[email protected]> wrote:
when set STARTMODE to true,weblogic will be started on production mode?
what's the difference of production mode & developement mode ?

Main difference between windows version and linux/mac version?

Hi,
Our lab just buy a labview package 2011 and it comes with several dvds, including
For windows
1) NILabView Core Software DVD1/2
2) NILabView Core Software DVD2/2
3) Extended Development Suite
4) Labview Option DVD1/2
5) LabView Option DVD 2/2,
6) Ni device drivers
For Mac/Linux
1) Professional Developement SyStem
Why there are that many dvds for windows, but only one disc for mac/linux? What's the main difference? I aslo curious if there is any advantage to use MAC/LINUX (in terms of efficiency or speed)?

I have been using LV on the Mac almost exclusively since version 1.2.
<soapbox mode = ON>
It has been a major source of frustration, that so many features available to the Windows versions are not available on the Mac. Some, like Vision, started (as iMAQ ) on the Mac, but are now Windows-only. Things like .NET are understandable, just as the Windows version probably does not support Apple Events. But support for all DAQ devices, Vision, the State Chart program and many others are missing with no good explanation from NI.
Just trying to figure out what is supported on which platforms is a major headache. NI's website does not make that obvious, particularly at the Buy page, where is should be extremely clear as to what you get for ~$5k or not. Given the substantial discrepancy between the features on the various platforms, the price should also reflect that.
Field representatives and phone support people often do not know these things as well.
Nancy Pelosi is quoted as having said that the health care bill had to be passed so we could see what was in it. Apparently some of the marketing people at NI are the same way. But the Mac/Linux versions at full price so you can find out what is not in them.
<\soapbox mode = OFF>
Lynn

Difference between Academic Version and Full Version?

Can anyone tell me what the difference is between the Academic version of Final Cut studio, and the Retail versoin other than a huge price difference??
THanks!

What do schools do when a new version comes out, are they expected to shell out another 700 bucks for each license they currently have?
if you want the new features you upgrade
if the version you have is working for you why would you be expected to upgrade, nobody is forcing you to upgrade
man you are soooo lucky
back when I was in Film school FCP alone cost over 1200 same for DVDSP and I had to get AFX 5.5 and Protools (Motion and STP weren't out yet) each over 1K (PT over 1500)
or ANOTHER academic copy
WHY knowing this and planning on needing FCP AFTER you are eligible to use EDU (after you graduate) consider locking your self into another nonupgradeable path
How am I gonna explain to my dad that he needs to shell out MORE money than the original copy just for an upgrade?
why are you worring about this right now
no new X.0 version has been announced so there is no need for you to worry about this. if you NEED the new features IF there is another version announed at a later event why not start saving now
nothing will stop the version you are using now from working
you don't NEED to upgrade with every version
NOWHERE on the educational Final Cut Studio page does it say that it is not upgradeable.
yes it is
it has been also discussed here, at nausea, when ever someone upgrades without reading or checking resources
I forget the exact link but basically it says "you cannot use a Academic version or NFR versions as a starting point for upgrading to version 5/studio"
DAVE

Difference between educational version and standard version?

I'm a student. I presently am running the regular Creative Cloud (I took advantage of the special upgrade pricing) but I'm thinking of switching to the educational version after my subscription expires in August. Is there any difference in functionality between these two versions? I do freelance work, is this a conflict with the licensing of the educational version of CC?
Thank you!

There are no functionality or licensing differences with the educational subscription for the Creative Cloud.

Difference between production version and routing

Similar Messages

Maybe you are looking for