Difference Between Provide and RP-PROVIDE-FROM-LAST in ABAP-HR

what is the Difference Between Provide and RP-PROVIDE-FROM-LAST IN hR. IF I want to retrieve data in BETTWEEN BEGDA AND ENDDA. what these 2 ill return.
Both ill return the LAtest record. plz let me know what ill happen.
With Regards,
Venkata Suresh K

PROVIDE is like a loop statement and it reads records between BEGDA and ENDDA. There is a lot to it, you can read doc...
RP-PROVIDE-.. _> This is like read table.
It is similar to : Sort itab descending. read itab index 1.
If you want data between BEGDA and ENDDA and you have 2 internal tables, you can use PROVIDE. Otherwise, you can use a normal LOOP statement. Provide is helpful if you want to get data from more than 1 table.
For eg: Infotype 0000 has 2 records from 1.1.2000 to 1.1.2006, and 2.1.2006 to 31.12.9999, and Infotype 0185 has 1 record from 1.1.2005 to 31.12.9999.
If you use a provide BETWEEN BEGDA and endda in this case, it will run through the loop 3 times with these dates :
1.1.2000 to 31.12.2004.
1.1.2005 to 1.1.2006
2.1.2006 to 31.12.9999
If a record is not there in one of the internal tables during the date, there is a PNNNN_VALID flag which is filled up (4.6c) and in mySAP onwards, you have explicit valid flags.
Hope it helps. Please reward points if helpful.
Regards.
Samant

Similar Messages

Difference between RP_PROVIDE_FROM_LAST and RP-PROVIDE-FROM-LAST

Can anyone tell me the difference between RP_PROVIDE_FROM_LAST and RP-PROVIDE-FROM-LAST? Both the macros are same difference is with underscore(_) and hiphen(-). Both are working fine for the functionality without any difference. Then why there are two macros for a single functionality?

Just providing the links are considered as link farming ( which are against the rules of the forums ), the links would be removed for the following reasons:
1) If a link is provided( not many ) , then you must point out the explanation in it
2) If the links were easily searchable by the OP
3) If the links just direct you to sap documentation
4) If the reply consists only bunch of link references.
I think the 3rd & 4th point made your post to be deleted.
There are no links which states the differences between these two Macro's. Mod's are doing their right job, please join them and make this forum clean
Kesav

Difference between 3X and 7X routine in term of ABAP coding

Hi to all,
Please can any one tell me?
What is difference between 3X and 7X routine, in technical aspect (ABAP coding).
I shall be thankful to you for this.
Regards
Pavneet Rana

Hi Rana,
Check the below link
[Differences in Routine Concepts in BW3.x n Bi7.0|http://help.sap.com/saphelp_nw2004s/helpdata/en/44/bd9b5be97c112ce10000000a11466f/content.htm]
Regards
KP

Difference between Reconstruction and regular load from PSA

Gurus,
      What is the Difference between Reconstruction and load from PSA into datatarget.I understand that during Reconstruction we are not loaing data from R3.
      I have a cube and there are 3 requests in that.I deleted all the requests went to PSA and selected one of the requests and selected reconstruct from this.I went to cube and I can see this selected request in PSA in the reconstruction requests of cube.I submitted the reconstruction/Insert button there.
      Is this the procedure to do reconstruction.If yes then how is it different from regular load from PSA.
Thanks

If look function wise both are doing samething. But there is difference in data flow, PSA is used as staging area. If we choose at first place to load only to PSA and analyze our load do manual editing if needed and then load to data target in this case ofcourse reconstruct option is not available or we could parrallely or sequencialy load to data target beside laoding into PSA. So now having already have loaded into data target if some how we needed to delete and reload we can reconstruct the request or run normal load from PSA.

What's the difference between PNG and JPG for exporting .idea files from the Adobe Ideas app?

What's the difference between PNG and JPG for exporting .idea files from the Adobe Ideas app?
What situations are better to export to to .PNG or .JPG?
J

iPad apps are designed specifically for the iPad and will not run on the iPhone or iPod Touch. iPhone/iPod apps will run on the iPad, but will only take up an iPhone sized portion of the iPad screen (though you get a 2x button which effectively doubles each pixel in both directions so may appear pixelated). There are also 'universal' apps (which have a '+' symbol against them in the store) which have processing in them to recognise the device that they are on and will tailor the display accordingly (so will make use of the iPad's larger screen).

Difference between AAC and m4a files, converting from AAC to useable format

Does anyone know the difference between AAC and m4a files? iTunes has an option to use an AAC encoder to compress CD files, but this creates an m4a file not an AAC file. I just got some actual AAC files and iTunes cannot read these, is there a way to convert from AAC to a format that iTunes recognizes? Thanks

iTunes uses AAC data wrapped in an MPEG 4 container file. If you got some *.AAC files, and they're just raw AAC files, then you need to wrap them in an MPEG 4 container. The only way I know to do this is using the foobar 2000 program. You can find more information at http://www.hydrogenaudio.org and http://www.foobar2000.org

Difference between JSF and JPF from WebLogic workshop

Hi i am new to JSF , currently i am working on JPF and i got a chance to work on JSF..
I feel that event drivent programming as same as JSF and In JPF.
Can any body explaine in detail difference between JSF and JPF
Thanks in Advance
Suneel.

JSF is Sun's MVC framework for web applications.
I've never heard of JPF, so it might not be part of Sun.

Basic differences between G2 and G3

hey, is there a breakdown anywhere of the basic differences between G2 and G3?
i've tried looking but everything i've read seems to single out the podcast features of g3 which to be honest, don't really do much for me, since i would be using it mostly for music.
Are there substantial differences aside from the podcast features that would justify the upgrade? and if so, any idea where i can read about them?
thanks in advance.
G4 Mac OS X (10.4.6)

there also some more differences as compare to gb2 is the ability to do music composition for your edited imovies and one more thing if you change your track to sound efxs you can drag audio files into your onscreen keyboard or your musical typing on your assign key to do music composition which gb2 dont provide last time.

Differences between awt and swing

Ive written the following code, however Ive implemented the gui in awt rather then swing. Ive been told it hs too be in swing. What is the difference between swing and awt what will I need to change in my program so that its done using swing rather then the awt? Heres the code:
// pp.java
// Grant Brown
// 22/02/02
import java.awt.*;
import java.awt.event.*;
import java.io.*;
import java.util.*;
import javax.swing.*;
// =========================================================
// Class: pp
// This class drives the customer manager. It contains the
// main method which gets called as soon as this application
// begins to run.
// =========================================================
class pp extends Frame implements ActionListener
// Container of customer objects
private Vector customers = new Vector (100);
// List of names component. (Must specify java.awt in
// front of List to distinguish the List class in the
// java.awt package from the List class in the java.util
// package.)
private java.awt.List names = new java.awt.List ();
// Delete and update button components.
private Button delete;
private Button update;
// Default constructor.
public pp ()
// Assign "Paper Round Manager" to title bar of frame window.
super ("Paper Round Manager");
// Add a listener that responds to window closing
// events. When this event occurs (by clicking on the
// close box in the title bar), save customers and exit.
addWindowListener (new WindowAdapter ()
public void windowClosing
(WindowEvent e)
saveCustomers ();
System.exit (0);
// Place an empty label in the north part of the frame
// window. This is done to correct an AWT positioning
// problem.
Label l = new Label ();
add ("North", l);
// Place the names component in the center part of the
// frame window.
add ("Center", names);
// Create a panel object to hold four buttons.
Panel p = new Panel ();
Button b;
// Add an Insert button to the Panel object and register
// the current pp object as a listener for button events.
p.add (b = new Button ("Insert"));
b.addActionListener (this);
// Add a Delete button to the Panel object and register
// the current pp object as a listener for button events.
p.add (delete = new Button ("Delete"));
delete.addActionListener (this);
// The Delete button should be disabled until there is at
// least one customer to delete.
delete.setEnabled (false);
// Add an Update button to the Panel object and register
// the current pp object as a listener for button events.
p.add (update = new Button ("Update"));
update.addActionListener (this);
// The Update button should be disabled until there is at
// least one customer to update.
update.setEnabled (false);
// Add a Finish button to the Panel object and register
// the current customer object as a listener for button events.
p.add (b = new Button ("Finish"));
b.addActionListener (this);
// Add the panel object to the frame window container.
add ("South", p);
// Set the background of the frame window container to
// lightGray
setBackground (Color.lightGray);
// Set the size of the frame window container to 400
// pixels horizontally by 200 pixels vertically.
setSize (400, 200);
// Allow the user to resize the frame window.
setResizable (true);
// Load all contacts.
loadCustomers ();
// Make sure that the frame window is visible.
setVisible (true);
public void actionPerformed (ActionEvent e)
if (e.getActionCommand ().equals ("Delete"))
delete ();
else
if (e.getActionCommand ().equals ("Finish"))
saveCustomers ();
System.exit (0);
else
if (e.getActionCommand ().equals ("Insert"))
insert ();
else
update ();
public Insets getInsets ()
// Return an Insets object that describes the number of
// pixels to reserve as a border around the edges of the
// frame window.
return new Insets (10, 10, 10, 10);
public static void main (String [] args)
// Create a new pp object and let it do its thing.
new pp ();
private void delete ()
// Obtain index of selected contact item from the names
// component.
int index = names.getSelectedIndex ();
// If no item was selected, index is -1. We cannot update
// a contact if no contact item in the names component was
// selected - because we would have nothing to work with.
if (index != -1)
// Remove the contact item from the names component.
names.remove (index);
// Remove the Customer object from the contacts Vector
// object.
customers.remove (index);
// If there are no more customers ...
if (customers.size () == 0)
delete.setEnabled (false);
update.setEnabled (false);
else
// Make sure that the first contact item in the names
// list is highlighted.
names.select (0);
private void insert ()
// Create an Insert data entry form to enter information
// for a new customer.
DataEntryForm def = new DataEntryForm (this, "Insert");
// If the bOk Boolean flag is set, this indicates the user
// exited the form by pressing the Ok button.
if (def.bOk)
// Create a Contact object and assign information from
// the form to its fields.
Customer temp = new Customer ();
temp.name = new String (def.name.getText ());
temp.publication = new String (def.publication.getText ());
temp.round = new String (def.round.getText ());
temp.address = new String (def.address.getText ());
temp.phone = new String (def.phone.getText ());
// Add a new customer item to the names component.
names.add (temp.name + ", " + temp.publication);
// Add the Customer object to the contacts Vector
// object.
customers.add (temp);
// Make sure that the Delete and Update buttons are
// enabled.
delete.setEnabled (true);
update.setEnabled (true);
// Destroy the dialouge box.
def.dispose ();
// Make sure that the first customer item in the names list
// is highlighted.
names.select (0);
// ===========================================================
// Load all contacts from contacts.dat into the contacts
// Vector object. Also, make sure that the last name/first
// name from each contact is combined into a String object and
// inserted into the names component - as a contact item.
// ===========================================================
private void loadCustomers ()
FileInputStream fis = null;
try
fis = new FileInputStream ("Customers.dat");
DataInputStream dis = new DataInputStream (fis);
int nCustomers = dis.readInt ();
for (int i = 0; i < nCustomers; i++)
Customer temp = new Customer ();
temp.name = dis.readUTF ();
temp.publication = dis.readUTF ();
temp.round = dis.readUTF ();
temp.address = dis.readUTF ();
temp.phone = dis.readUTF ();
names.add (temp.name + ", " + temp.publication);
customers.add (temp);
if (nCustomers > 0)
delete.setEnabled (true);
update.setEnabled (true);
catch (IOException e)
finally
if (fis != null)
try
fis.close ();
catch (IOException e) {}
// Make sure that the first contact item in the names list
// is highlighted.
names.select (0);
// ========================================================
// Save all Customer objects from the customer Vector object
// to customer.dat. The number of customerss are saved as an
// int to make it easy for loadCustomers () to do its job.
// ========================================================
private void saveCustomers ()
FileOutputStream fos = null;
try
fos = new FileOutputStream ("customers.dat");
DataOutputStream dos = new DataOutputStream (fos);
dos.writeInt (customers.size ());
for (int i = 0; i < customers.size (); i++)
Customer temp = (Customer) customers.elementAt (i);
dos.writeUTF (temp.name);
dos.writeUTF (temp.publication);
dos.writeUTF (temp.round);
dos.writeUTF (temp.address);
dos.writeUTF (temp.phone);
catch (IOException e)
MsgBox mb = new MsgBox (this, "PP Error",
e.toString ());
mb.dispose ();
finally
if (fos != null)
try
fos.close ();
catch (IOException e) {}
private void update ()
// Obtain index of selected customer item from the names
// component.
int index = names.getSelectedIndex ();
// If no item was selected, index is -1. We cannot update
// a customer if no customer item in the names component was
// selected - because we would have nothing to work with.
if (index != -1)
// Obtain a reference to the customer object (from the
// customers Vector object) that is associated with the
// index.
Customer temp = (Customer) customers.elementAt (index);
// Create and display an update entry form.
DataEntryForm def = new DataEntryForm (this, "Update",
temp.name,
temp.publication,
temp.round,
temp.address,
temp.phone);
// If the user pressed Ok...
if (def.bOk)
// Update the customer information in the customers
// Vector object.
temp.name = new String (def.name.getText ());
temp.publication = new String (def.publication.getText ());
temp.round = new String (def.round.getText ());
temp.address = new String (def.address.getText ());
temp.phone = new String (def.phone.getText ());
// Make sure the screen reflects the update.
names.replaceItem (temp.name + ", " + temp.publication,
index);
// Destroy the dialouge box.
def.dispose ();
// Make sure that the first customer item in the names
// list is highlighted.
names.select (0);

Ive doen pretty much what you said burt now my program isnt working at all. The window comes up but instead of doing something when you click the button it just throws shit loads of exceptions. Heres my abridged code
// pp.java
// Grant Brown
// 22/02/02
import java.awt.*;
import java.awt.event.*;
import java.io.*;
import java.util.*;
import javax.swing.*;
// =========================================================
// Class:PP
// This class drives the Paper Round manager. It contains the
// main method which gets called as soon as this application
// begins to run.
// =========================================================
class pp extends JFrame implements ActionListener
// Container of customer objects (one object per customer)
private Vector customers = new Vector (100);
// List of names component. (Must specify java.awt in
// front of List to distinguish the List class in the
// java.awt package from the List class in the java.util
// package.)
private java.awt.List names = new java.awt.List ();
// Delete and update button components.
private JButton delete;
private JButton update;
// Default constructor.
public pp ()
// Assign Contact Manager to title bar of frame window.
super ("Paper Round Manager");
// Add a listener that responds to window closing
// events. When this event occurs (by clicking on the
// close box in the title bar), save contacts and exit.
addWindowListener (new WindowAdapter ()
public void windowClosing
(WindowEvent e)
saveCustomers ();
System.exit (0);
// Place an empty label in the north part of the frame
// window. This is done to correct an AWT positioning
// problem. (One thing that you'll come to realize as
// you work with the AWT is that there are lots of bugs.)
JLabel l = new JLabel ();
getContentPane().add ("North", l);
// Place the names component in the center part of the
// frame window.
getContentPane().add ("Center", names);
// Create a panel object to hold four buttons.
JPanel p = new JPanel ();
JButton b;
// Add an Insert button to the Panel object and register
// the current cm object as a listener for button events.
p.add (b = new JButton ("Insert"));
b.addActionListener (this);
// Add a Delete button to the Panel object and register
// the current cm object as a listener for button events.
p.add (delete = new JButton ("Delete"));
delete.addActionListener (this);
// The Delete button should be disabled until there is at
// least one contact to delete.
delete.setEnabled (false);
// Add an Update button to the Panel object and register
// the current cm object as a listener for button events.
p.add (update = new JButton ("Update"));
update.addActionListener (this);
// The Update button should be disabled until there is at
// least one contact to update.
update.setEnabled (false);
// Add a Finish button to the Panel object and register
// the current cm object as a listener for button events.
p.add (b = new JButton ("Finish"));
b.addActionListener (this);
// Add the panel object to the frame window container.
getContentPane().add ("South", p);
// Set the background of the frame window container to
// lightGray (to give a pleasing effect).
setBackground (Color.lightGray);
// Set the size of the frame window container to 400
// pixels horizontally by 200 pixels vertically.
setBounds (50, 100, 400, 200);
// Do not allow the user to resize the frame window.
loadCustomers ();
// Load all contacts.
setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
// Make sure that the frame window is visible.
setVisible (true);
public void actionPerformed (ActionEvent e)
if (e.getActionCommand ().equals ("Delete"))
delete ();
else
if (e.getActionCommand ().equals ("Finish"))
saveCustomers ();
System.exit (0);
else
if (e.getActionCommand ().equals ("Insert"))
insert ();
else
update ();
public Insets getInsets ()
// Return an Insets object that describes the number of
// pixels to reserve as a border around the edges of the
// frame window.
return new Insets (10, 10, 10, 10);
public static void main (String [] args)
// Create a new cm object and let it do its thing.
new pp ();
private void delete ()
// Obtain index of selected customer item from the names
// component.
int index = names.getSelectedIndex ();
// If no item was selected, index is -1. We cannot update
// a contact if no contact item in the names component was
// selected - because we would have nothing to work with.
if (index != -1)
// Remove the customer item from the names component.
names.remove (index);
// Remove the Customer object from the contacts Vector
// object.
customers.remove (index);
// If there are no more customers ...
if (customers.size () == 0)
delete.setEnabled (false);
update.setEnabled (false);
else
// Make sure that the first contact item in the names
// list is highlighted.
names.select (0);
private void insert ()
// Create an Insert data entry form to enter information
// for a new contact.
DataEntryForm def = new DataEntryForm (this, "Insert");
// If the bOk Boolean flag is set, this indicates the user
// exited the form by pressing the Ok button.
if (def.bOk)
// Create a Customer object and assign information from
// the form to its fields.
Customer temp = new Customer ();
temp.name = new String (def.name.getText ());
temp.publication = new String (def.publication.getText ());
temp.address = new String (def.address.getText ());
temp.round = new String (def.round.getText ());
temp.phone = new String
(def.phone.getText ());
// Add a new customer item to the names component.
names.add (temp.publication + ", " + temp.address);
// Add the Customer object to the contacts Vector
// object.
customers.add (temp);
// Make sure that the Delete and Update buttons are
// enabled.
delete.setEnabled (true);
update.setEnabled (true);
// Destroy the dialog box.
def.dispose ();
// Make sure that the first customer item in the names list
// is highlighted.
names.select (0);
// ===========================================================
// Load all customers from customers.dat into the customers
// Vector object. Also, make sure that the last name/first
// name from each contact is combined into a String object and
// inserted into the names component - as a contact item.
// ===========================================================
private void loadCustomers ()
FileInputStream fis = null;
try
fis = new FileInputStream ("customers.dat");
DataInputStream dis = new DataInputStream (fis);
int nCustomers = dis.readInt ();
for (int i = 0; i < nCustomers; i++)
Customer temp = new Customer ();
temp.name = dis.readUTF ();
temp.publication = dis.readUTF ();
temp.address = dis.readUTF ();
temp.round = dis.readUTF ();
temp.phone = dis.readUTF ();
names.add (temp.publication + ", " + temp.address);
customers.add (temp);
if (nCustomers > 0)
delete.setEnabled (true);
update.setEnabled (true);
catch (IOException e)
finally
if (fis != null)
try
fis.close ();
catch (IOException e) {}
// Make sure that the first customer item in the names list
// is highlighted.
names.select (0);
// ========================================================
// Save all customer objects from the contacts Vector object
// to customers.dat. The number of contacts are saved as an
// int to make it easy for loadCustomers () to do its job.
// ========================================================
private void saveCustomers ()
FileOutputStream fos = null;
try
fos = new FileOutputStream ("customers.dat");
DataOutputStream dos = new DataOutputStream (fos);
dos.writeInt (customers.size ());
for (int i = 0; i < customers.size (); i++)
Customer temp = (Customer) customers.elementAt (i);
dos.writeUTF (temp.name);
dos.writeUTF (temp.publication);
dos.writeUTF (temp.address);
dos.writeUTF (temp.round);
dos.writeUTF (temp.phone);
catch (IOException e)
MsgBox mb = new MsgBox (this, "PP Error",
e.toString ());
mb.dispose ();
finally
if (fos != null)
try
fos.close ();
catch (IOException e) {}
private void update ()
// Obtain index of selected customer item from the names
// component.
int index = names.getSelectedIndex ();
// If no item was selected, index is -1. We cannot update
// a customer if no customer item in the names component was
// selected - because we would have nothing to work with.
if (index != -1)
// Obtain a reference to the Customer object (from the
// customer Vector object) that is associated with the
// index.
Customer temp = (Customer) customers.elementAt (index);
// Create and display an update entry form.
DataEntryForm def = new DataEntryForm (this, "Update",
temp.name,
temp.publication,
temp.address,
temp.round,
temp.phone);
// If the user pressed Ok...
if (def.bOk)
// Update the customer information in the customers
// Vector object.
temp.name = new String (def.name.getText ());
temp.publication = new String (def.publication.getText ());
temp.address = new String (def.address.getText ());
temp.round = new String (def.round.getText ());
temp.phone = new String (def.phone.getText ());
// Make sure the screen reflects the update.
names.replaceItem (temp.publication + ", " + temp.address,
index);
// Destroy the dialog box.
def.dispose ();
// Make sure that the first customer item in the names
// list is highlighted.
names.select (0);
// ========================================================
// Class: Customer
// This class describes the contents of a business customer.
// ========================================================
class Customer
public String name;
public String publication;
public String address;
public String round;
public String phone;
// ==========================================================
// Class: DataEntryForm
// This class provides a data entry form for entering customer
// information.
// ==========================================================
class DataEntryForm extends JDialog implements ActionListener
// bOk is a boolean flag. When true, it indicates that
// the Ok button was pressed to terminate the dialog box
// (as opposed to the Cancel button).
public boolean bOk;
// The following components hold the text that the user
// entered into the visible text fields.
public JTextField name;
public JTextField publication;
public JTextField address;
public JTextField round;
public JTextField phone;
public void actionPerformed (ActionEvent e)
// If the user pressed the Ok button, indicate this
// by assigning true to bOk.
if (e.getActionCommand ().equals ("Ok"))
bOk = true;
// Destroy the dialog box and return to the point
// just after the creation of the DataEntryForm object.
dispose ();
public DataEntryForm (JFrame parent, String title)
// Call the other constructor. The current constructor
// is used for insert operations. The other constructor
// is used for update operations.
this (parent, title, "", "", "", "", "");
public DataEntryForm (JFrame parent, String title,
String name, String publication,
String address, String round,
String phone)
// Initialize the superclass layer.
super (parent, title, true);
// Choose a grid bag layout so that components can be more
// accurately positioned. (It looks nicer.)
setLayout (new GridBagLayout ());
// Add appropriate first name, last name, phone, fax, and
// email components to the current DataEntryForm container.
// (Remember, DataEntryForm is a subclass of Dialog.
// Dialog is a container. Therefore, DataEntryForm
// inherits the ability to be a container.)
addComponent (this, new JLabel ("Name: "), 0, 0, 1, 1,
GridBagConstraints.NONE,
GridBagConstraints.WEST);
this.name = new JTextField (15);
addComponent (this, this.name, 1, 0, 1, 1,
GridBagConstraints.NONE,
GridBagConstraints.CENTER);
if (title.equals ("Update"))
this.name.setText (name);
addComponent (this, new JLabel ("Publications: "), 0, 1, 1, 1,
GridBagConstraints.NONE,
GridBagConstraints.WEST);
this.publication = new JTextField (15);
addComponent (this, this.publication, 1, 1, 1, 1,
GridBagConstraints.NONE,
GridBagConstraints.CENTER);
if (title.equals ("Update"))
this.publication.setText (publication);
addComponent (this, new JLabel ("Address "), 0, 2, 1, 1,
GridBagConstraints.NONE,
GridBagConstraints.WEST);
this.address = new JTextField (15);
addComponent (this, this.address, 1, 2, 1, 1,
GridBagConstraints.NONE,
GridBagConstraints.CENTER);
if (title.equals ("Update"))
this.address.setText (address);
addComponent (this, new JLabel ("Round No "), 0, 3, 1, 1,
GridBagConstraints.NONE,
GridBagConstraints.WEST);
this.round = new JTextField (15);
addComponent (this, this.round, 1, 3, 1, 1,
GridBagConstraints.NONE,
GridBagConstraints.CENTER);
if (title.equals ("Update"))
this.round.setText (round);
addComponent (this, new JLabel ("Phone Number "), 0, 4, 1, 1,
GridBagConstraints.NONE,
GridBagConstraints.WEST);
this.phone = new JTextField (15);
addComponent (this, this.phone, 1, 4, 1, 1,
GridBagConstraints.NONE,
GridBagConstraints.CENTER);
if (title.equals ("Update"))
this.phone.setText (phone);
addComponent (this, new JLabel (""), 0, 5, 1, 1,
GridBagConstraints.NONE,
GridBagConstraints.CENTER);
addComponent (this, new JLabel (""), 1, 5, 1, 1,
GridBagConstraints.NONE,
GridBagConstraints.CENTER);
JButton b;
// Add an Ok button to this container.
addComponent (this, b = new JButton ("Ok"), 0, 6, 1, 1,
GridBagConstraints.NONE,
GridBagConstraints.CENTER);
b.addActionListener (this);
// Add a Cancel button to this container.
addComponent (this, b = new JButton ("Cancel"), 1, 6, 1, 1,
GridBagConstraints.NONE,
GridBagConstraints.CENTER);
b.addActionListener (this);
// Set the size of the dialog window to 250 pixels
// horizontally by 200 pixels vertically.
setSize (250, 200);
// Do not allow users to resize the dialog window.
setResizable (false);
// Make sure that the dialog window is visible.
setVisible (true);
private void addComponent (Container con, Component com,
int gridx, int gridy,
int gridw, int gridh, int fill,
int anchor)
// Get the current layout manager. It is assumed to
// be a GridBagLayout object.
LayoutManager lm = con.getLayout ();
// Create a GridBagConstraints object to make it
// possible to customize component positioning.
GridBagConstraints gbc = new GridBagConstraints ();
// Assign the x and y grid positions.
gbc.gridx = gridx;
gbc.gridy = gridy;
// Assign the number of grid blocks horizontally and
// vertically that are occupied by the component.
gbc.gridwidth = gridw;
gbc.gridheight = gridh;
// Specify the component's resize policy (fill) and
// the direction in which the component is positioned
// when its size is smaller than available space (anchor).
gbc.fill = fill;
gbc.anchor = anchor;
// Set the new constraints that the grid bag layout
// manager will use.
((GridBagLayout) lm).setConstraints (com, gbc);
// Add the component to the container.
con.add (com);
// ===========================================================
// Class: MsgBox
// This class displays a message box to the user. The message
// is usually an error message. The user must press the Ok
// button to terminate the message box.
// ===========================================================
class MsgBox extends JDialog implements ActionListener
public void actionPerformed (ActionEvent e)
// Terminate the dialog box in response to the user
// pressing the Ok button.
dispose ();
public MsgBox (JFrame parent, String title, String msg)
// Initialize the superclass layer.
super (parent, title, true);
// Store the msg argument in a Label object and add
// this object to the center part of the dialog window.
JLabel l = new JLabel (msg);
add ("Center", l);
// Create a Button object and add it to the south part
// of the dialog window.
JButton b = new JButton ("Ok");
add ("South", b);
// Make the current object a listener to events that
// occur as a result of the user pressing the Ok
// button.
b.addActionListener (this);
// Make sure that the Ok button has the focus.
b.requestFocus ();
// Do not allow users to resize the dialog window.
setResizable (false);
// Allow the layout manager to choose an appropriate
// size for the dialog window.
pack ();
// Make sure that the dialog window is visible.
setVisible (true);
}

I would like to know the difference between OEL and RHEL

I would like to know the difference between OEL and RHEL, are they same?
If I test any application on RHEL, will it work on OEL too.
Thanks
Edited by: user10685113 on 08-Aug-2012 05:35

The name OEL as such is not used anymore, since the product was renamed from Oracle Enterprise Linux to Oracle Linux with the release of version 5.5 in September 2010.
The main technical difference between Oracle Linux and RHEL is that Oracle Linux ships with an Oracle exclusive and optimized Oracle UEK kernel. It does however still install and provide the original and older RHEL kernel for fallback.
As of Oracle Linux 5.6, the Oracle UEK kernel is the default kernel. The current latest version of Oracle Linux 6.3 uses the Oracle UEK2 kernel, which is based on the Linux 3 kernel (2.6.39).
Oracle Linux is binary compatible with RHEL.
Oracle Linux has several advantages over RHEL, in particular if you plan to use it to install Oracle products.
• The same kernel UEK and UEK2 versions are available for Oracle Linux 5.x and 6.x
You do not necessarily need to perform a complete and unsupported system upgrade to use a newer kernel version and drivers.
• Oracle Pubilc YUM
Oracle provides a public yum repository for installing software packages including the latest patches. RHEL does not and requires a paid subscription for online access.
• Oracle specific drivers and software
Oracle Linux provides additional software and kernel drivers, for Oracle clustering, Dtrace, BtrFS and ASM, which is not available for RHEL 6.
Oracle Linux provides additional packages which trigger the automatic installation of system software prerequisites, including kernel parameters and oracle account setup to install Oracle Database:
oracle-validated (Oracle Linux 5)
oracle-rdbms-server-11gR2-preinstall (Oracle Linux 6)
And last not least you have just one vendor and support requirement for Oracle products.
Have you checked the Internet:
http://www.oracle.com/us/technologies/linux/index.html
https://linux.oracle.com
To obtain Oracle Linux:
https://edelivery.oracle.com/linux
https://wikis.oracle.com/display/oraclelinux/Downloading+Oracle+Linux (alternative)
Edited by: Dude on Aug 8, 2012 2:29 PM

Difference between BAPI and RFC?

Difference between BAPI and RFC?
also where to use BAPI and where to use RFC?

Hi,
BAPI are RFC enabled function modules. the difference between RFc and BAPI are business objects. You create business objects and those are then registered in your BOR (Business Object Repository) which can be accessed outside the SAP system by using some other applications (Non-SAP) such as VB or JAVA. in this case u only specify the business object and its method from external system in BAPI there is no direct system call. while RFC are direct system call Some BAPIs provide basic functions and can be used for most SAP business object types. These BAPIs should be implemented the same for all business object types. Standardized BAPIs are easier to use and prevent users having to deal with a number of different BAPIs. Whenever possible, a standardized BAPI must be used in preference to an individual BAPI.
The following standardized BAPIs are provided:
Reading instances of SAP business objects
GetList ( ) With the BAPI GetList you can select a range of object key values, for example, company codes and material numbers.
The BAPI GetList() is a class method.
GetDetail() With the BAPI GetDetail() the details of an instance of a business object type are retrieved and returned to the calling program. The instance is identified via its key. The BAPI GetDetail() is an instance method. BAPIs that can create, change or delete instances of a business object type
The following BAPIs of the same object type have to be programmed so that they can be called several times within one transaction. For example, if, after sales order 1 has been created, a second sales order 2 is created in the same transaction, the second BAPI call must not affect the consistency of the sales order 2. After completing the transaction with a COMMIT WORK, both the orders are saved consistently in the database.
Create( ) and CreateFromData! ( )
The BAPIs Create() and CreateFromData() create an instance of an SAP business object type, for example, a purchase order. These BAPIs are class methods.
Change( )
The BAPI Change() changes an existing instance of an SAP business object type, for example, a purchase order. The BAPI Change () is an instance method.
Delete( ) and Undelete( ) The BAPI Delete() deletes an instance of an SAP business object type from the database or sets a deletion flag.
The BAPI Undelete() removes a deletion flag. These BAPIs are instance methods.
Cancel ( ) Unlike the BAPI Delete(), the BAPI Cancel() cancels an instance of a business object type. The instance to be cancelled remains in the database and an additional instance is created and this is the one that is actually canceled. The Cancel() BAPI is an instance method.
Add<subobject> ( ) and Remove<subobject> ( ) The BAPI Add<subobject> adds a subobject to an existing object inst! ance and the BAPI and Remove<subobject> removes a subobject from an object instance. These BAPIs are instance methods.
Regards,
Prakash

Office 2013 installed with KB2817430, windowsupdate still finds KB2850036. difference between KB2817430 and KB2850036

Hi,
I've made a silent Office 2013 installer with /admin and put SP1 MSP's in the updates folder.
After deployment under installed updates it shows: Service Pack 1 for Microsoft Office 2013 (KB2817430) 32-Bit Edition
But when I check for new updates, "ServicePack 1 for Microsoft Office 2013 (KB2850036) 32-Bit Edition" is ready for download and install.
What is the difference between KB2817430 and KB2850036?
It seems that I cannot download KB2850036 and also integrate it in the silent installation.
Another question: Is the updates folder from Office only for servicepacks? or can I put also updates and patches MSP files in here? If yes then i've got a lot of files with the same name and different files sizes. For example After extracting SP1 I've got
the file "proofsp-en-us.msp" which is 10MB and when extracting another patch also i've got a proof-en-us.msp and is 8MB.
So which one need to go in the updates folder?
Can anyone help me out?
thanks

Hi,
As can be seen from below KB articles, KB2817430 only contains Service Pack 1 (SP1) for Office 2013, whereas KB2850036 also contains Service Pack 1 (SP1) updates for other Office 2013 related desktop products. For example, Microsoft Office 2013
Language Pack, Project 2013, SharePoint Designer 2013, Office Proofing Tools 2013, etc.:
https://support.microsoft.com/en-us/kb/2850036
https://support.microsoft.com/en-us/kb/2817430
So if you have any of these products on your computer, Windows Update might offer related updates to you.
Regarding the Updates folder issue, you can put any Office software updates in it during the initial installation, such as service packs or hotfixes. A newer patch might make changes to a specific file, you can check the version number of that file, and keep
the newer one in the folder.
Here is the reference you will need:
http://blogs.technet.com/b/office_resource_kit/archive/2011/05/05/using-the-updates-folder-to-deploy-software-updates-with-an-office-2010-installation.aspx
(Note, it was created against Office 2010, however the steps should hold good for Office 2013)
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Difference Between BAPI And RFC in ABAP

Hi,
i want to know difference between BAPI and RFC in SAP,
can we call SAP GUI screen from NON SAP System Using BAPI.
Reg,
Hariharan

Hi Ravishankar,
The difference is not importat while you understand the concept.
I think, RFC is the protocol for calling functions from external systems in R/3.
I understand like BAPI a series of complet functions that SAP offers you for use and model a business use.
But if I need program a function that can be called for external system i would call it RFC_NAME, because is a unique function that makes a single task.
In other words, the difference i think is about work idea more than another thing.
RFC
A remote function call is a call to a function module running in a system different from the caller's. The remote function can also be called from within the same system (as a remote call).
RFC consists of two interfaces : A calling interface for ABAP Programs and a calling interface for Non-SAP programs.
The RFC Interface takes care of :-
- Converting all parameter data to the representation needed in the remote system
Calling the communication routines needed to talk to the remote system.
Handling communications errors, and notifying the caller, if desired ( using EXCEPTIONS paramater of the CALL FUNCTION).
BAPI
BAPIs are standardized programming interfaces (methods) enabling external applications to access business processes and data in the R/3 System.
BAPIs provide stable and standardized methods to achieve seamless integration between the R/3 System and external applications, legacy systems and add-ons.
BAPIs are defined in the BOR(Business object repository) as methods of SAP business object types that carry out specific business functions.
BAPIs are implemented as RFC-enabled function modules and are created in the Function Builder of the ABAP Workbench.
The most critical difference btwn BAPI and FM is that BAPI can be wrapped in Business objects whereas RFC cant.
BAPI are RFC enabled function modules. the difference between RFc and BAPI are business objects. You create business objects and those are then registered in your BOR (Business Object Repository) which can be accessed outside the SAP system by using some other applications (Non-SAP) such as VB or JAVA. in this case u only specify the business object and its method from external system in BAPI there is no direct system call. while RFC are direct system call Some BAPIs provide basic functions and can be used for most SAP business object types. These BAPIs should be implemented the same for all business object types. Standardized BAPIs are easier to use and prevent users having to deal with a number of different BAPIs. Whenever possible, a standardized BAPI must be used in preference to an individual BAPI.
The following standardized BAPIs are provided:
Reading instances of SAP business objects
GetList ( ) With the BAPI GetList you can select a range of object key values, for example, company codes and material numbers.
The BAPI GetList() is a class method.
GetDetail() With the BAPI GetDetail() the details of an instance of a business object type are retrieved and returned to the calling program. The instance is identified via its key. The BAPI GetDetail() is an instance method. BAPIs that can create, change or delete instances of a business object type
The following BAPIs of the same object type have to be programmed so that they can be called several times within one transaction. For example, if, after sales order 1 has been created, a second sales order 2 is created in the same transaction, the second BAPI call must not affect the consistency of the sales order 2. After completing the transaction with a COMMIT WORK, both the orders are saved consistently in the database.
Create( ) and CreateFromData! ( )
The BAPIs Create() and CreateFromData() create an instance of an SAP business object type, for example, a purchase order. These BAPIs are class methods.
Change( )
The BAPI Change() changes an existing instance of an SAP business object type, for example, a purchase order. The BAPI Change () is an instance method.
Delete( ) and Undelete( ) The BAPI Delete() deletes an instance of an SAP business object type from the database or sets a deletion flag.
The BAPI Undelete() removes a deletion flag. These BAPIs are instance methods.
Cancel ( ) Unlike the BAPI Delete(), the BAPI Cancel() cancels an instance of a business object type. The instance to be cancelled remains in the database and an additional instance is created and this is the one that is actually canceled. The Cancel() BAPI is an instance method.
Add<subobject> ( ) and Remove<subobject> ( ) The BAPI Add<subobject> adds a subobject to an existing object inst! ance and the BAPI and Remove<subobject> removes a subobject from an object instance. These BAPIs are instance methods.
Check these Links out
http://searchsap.techtarget.com/ateQuestionNResponse/0,289625,sid21_cid558752_tax293481,00.html
http://www.sap-img.com/abap/interview-question-on-bapi-rfc-abap-objects-tables.htm
http://www.sap-img.com/fu033.htm
http://www.sap-img.com/abap/ale-bapi.htm
Refer following SDN threads:
Diff. Between BAPI and RFC
Re: BAPI and RFC
Hope this resolves your query.
Reward all the helpful answers.
Regards

What is the difference between count(*) and count(1)

what is the difference between count(*) and count(1)

Hi,
903830 wrote:
some say count(1) is faster and some say count(*), i am confused about count function?In the link provided by Prakash :
prakash wrote:
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:1156159920245
You can read :
Followup August 31, 2001 :
I'll have to guess, since you don't say, that you are using 7.x and before when count(*) and count(1) were different (and count(1) was slower). In all releases of the databases for the last 4-5 years, they are the same.
Don't waste your time on that.
;-)

What is the Difference Between Adapter and Proxy

Hi Master,
I want to know the Difference Between Adapters and Proxies.
And when we are using proxies and Adapters....
Regards,
SReddy

Adapters are part of the Adapter Framework. Adapters provide the technical connectivity to enable the integration of SAP and non-SAP applications through XIs Integration Engine.Again, Adapters are used for connectivity from and to external systems with XI that cannot communicate via proxies.Adapters are only required in SAP systems older than 6.20 and external systems.
Systems based on 6.20or higher can communicate directly with proxies.
The literal definition of a proxy is an object / process authorized to act for another; an agent or a substitute. In simpler terms, proxies in the XI context are objects used to encapsulate the creation (from a sender system) or parsing of XML (at a receiver system) as well as the communication with the relevant runtime components required to send or receive those messages.
Proxies are generated from Message Interface in IR.
The Proxy Runtime controls these objects / processes, and can itself be controlled by the applications it communicates with. The Proxy Runtime currently has the following components available: 1. ABAP Proxy Runtime Communication using XI or Web Services a. Web Service Runtime 2. Java Proxy Runtime Communication using XI (J2EE) The objects that the Proxy Runtime then controls are created via Proxy Generation, for both ABAP and Java. In the following sections a client proxy is used by an application to send messages outside of the system it resides in (normally to the IS in this context). Conversely, a server proxy is used by an application to receive messages from sources outside itself (again, normally the IS in this context).

Difference Between Provide and RP-PROVIDE-FROM-LAST in ABAP-HR

Similar Messages

Maybe you are looking for